[ARM] 3974/1: AT91: Remove USB Device header

The USB Device port registers are already defined in
drivers/usb/gadget/at91_udc.h.  This file can therefore just be removed.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 77 deletions

diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
deleted file mode 100644
index 951e3f61cef4..000000000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * USB Device Port (UDP) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_UDP_H
-#define AT91RM9200_UDP_H
-
-#define AT91_UDP_FRM_NUM        0x00            /* Frame Number Register */
-#define         AT91_UDP_NUM            (0x7ff <<  0)           /* Frame Number */
-#define         AT91_UDP_FRM_ERR        (1     << 16)           /* Frame Error */
-#define         AT91_UDP_FRM_OK         (1     << 17)           /* Frame OK */
-
-#define AT91_UDP_GLB_STAT       0x04            /* Global State Register */
-#define         AT91_UDP_FADDEN         (1 <<  0)               /* Function Address Enable */
-#define         AT91_UDP_CONFG          (1 <<  1)               /* Configured */
-#define         AT91_UDP_ESR            (1 <<  2)               /* Enable Send Resume */
-#define         AT91_UDP_RSMINPR        (1 <<  3)               /* Resume has been sent */
-#define         AT91_UDP_RMWUPE         (1 <<  4)               /* Remote Wake Up Enable */
-
-#define AT91_UDP_FADDR          0x08            /* Function Address Register */
-#define         AT91_UDP_FADD           (0x7f << 0)             /* Function Address Value */
-#define         AT91_UDP_FEN            (1    << 8)             /* Function Enable */
-
-#define AT91_UDP_IER            0x10            /* Interrupt Enable Register */
-#define AT91_UDP_IDR            0x14            /* Interrupt Disable Register */
-#define AT91_UDP_IMR            0x18            /* Interrupt Mask Register */
-
-#define AT91_UDP_ISR            0x1c            /* Interrupt Status Register */
-#define         AT91_UDP_EP(n)          (1 << (n))              /* Endpoint Interrupt Status */
-#define         AT91_UDP_RXSUSP         (1 <<  8)               /* USB Suspend Interrupt Status */
-#define         AT91_UDP_RXRSM          (1 <<  9)               /* USB Resume Interrupt Status */
-#define         AT91_UDP_EXTRSM         (1 << 10)               /* External Resume Interrupt Status */
-#define         AT91_UDP_SOFINT         (1 << 11)               /* Start of Frame Interrupt Status */
-#define         AT91_UDP_ENDBUSRES      (1 << 12)               /* End of Bus Reset Interrpt Status */
-#define         AT91_UDP_WAKEUP         (1 << 13)               /* USB Wakeup Interrupt Status */
-
-#define AT91_UDP_ICR            0x20            /* Interrupt Clear Register */
-#define AT91_UDP_RST_EP         0x28            /* Reset Endpoint Register */
-
-#define AT91_UDP_CSR(n)         (0x30 + ((n) * 4))      /* Endpoint Control/Status Registers 0-7 */
-#define         AT91_UDP_TXCOMP         (1 <<  0)               /* Generates IN packet with data previously written in DPR */
-#define         AT91_UDP_RX_DATA_BK0    (1 <<  1)               /* Receive Data Bank 0 */
-#define         AT91_UDP_RXSETUP        (1 <<  2)               /* Send STALL to the host */
-#define         AT91_UDP_STALLSENT      (1 <<  3)               /* Stall Sent / Isochronous error (Isochronous endpoints) */
-#define         AT91_UDP_TXPKTRDY       (1 <<  4)               /* Transmit Packet Ready */
-#define         AT91_UDP_FORCESTALL     (1 <<  5)               /* Force Stall */
-#define         AT91_UDP_RX_DATA_BK1    (1 <<  6)               /* Receive Data Bank 1 */
-#define         AT91_UDP_DIR            (1 <<  7)               /* Transfer Direction */
-#define         AT91_UDP_EPTYPE         (7 <<  8)               /* Endpoint Type */
-#define                 AT91_UDP_EPTYPE_CTRL            (0 <<  8)
-#define                 AT91_UDP_EPTYPE_ISO_OUT         (1 <<  8)
-#define                 AT91_UDP_EPTYPE_BULK_OUT        (2 <<  8)
-#define                 AT91_UDP_EPTYPE_INT_OUT         (3 <<  8)
-#define                 AT91_UDP_EPTYPE_ISO_IN          (5 <<  8)
-#define                 AT91_UDP_EPTYPE_BULK_IN         (6 <<  8)
-#define                 AT91_UDP_EPTYPE_INT_IN          (7 <<  8)
-#define         AT91_UDP_DTGLE          (1 << 11)               /* Data Toggle */
-#define         AT91_UDP_EPEDS          (1 << 15)               /* Endpoint Enable/Disable */
-#define         AT91_UDP_RXBYTECNT      (0x7ff << 16)           /* Number of bytes in FIFO */
-
-#define AT91_UDP_FDR(n)         (0x50 + ((n) * 4))      /* Endpoint FIFO Data Registers 0-7 */
-
-#define AT91_UDP_TXVC           0x74            /* Transceiver Control Register */
-#define         AT91_UDP_TXVC_TXVDIS    (1 << 8)                /* Transceiver Disable */
-
-#endif