viafb: move some include files to include/linux

These are the files which should be available to subdevices compiled
outside of drivers/video/via.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

3 files changed, 275 insertions, 0 deletions

diff --git a/include/linux/via-core.h b/include/linux/via-core.h
new file mode 100644
index 000000000000..7ffb521e1a7a
--- /dev/null
+++ b/include/linux/via-core.h
@@ -0,0 +1,219 @@
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Jonathan Corbet <corbet@lwn.net>
+ * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __VIA_CORE_H__
+#define __VIA_CORE_H__
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+
+/*
+ * A description of each known serial I2C/GPIO port.
+ */
+enum via_port_type {
+        VIA_PORT_NONE = 0,
+        VIA_PORT_I2C,
+        VIA_PORT_GPIO,
+};
+
+enum via_port_mode {
+        VIA_MODE_OFF = 0,
+        VIA_MODE_I2C,           /* Used as I2C port */
+        VIA_MODE_GPIO,  /* Two GPIO ports */
+};
+
+enum viafb_i2c_adap {
+        VIA_PORT_26 = 0,
+        VIA_PORT_31,
+        VIA_PORT_25,
+        VIA_PORT_2C,
+        VIA_PORT_3D,
+};
+#define VIAFB_NUM_PORTS 5
+
+struct via_port_cfg {
+        enum via_port_type      type;
+        enum via_port_mode      mode;
+        u16                     io_port;
+        u8                      ioport_index;
+};
+
+/*
+ * This is the global viafb "device" containing stuff needed by
+ * all subdevs.
+ */
+struct viafb_dev {
+        struct pci_dev *pdev;
+        int chip_type;
+        struct via_port_cfg *port_cfg;
+        /*
+         * Spinlock for access to device registers.  Not yet
+         * globally used.
+         */
+        spinlock_t reg_lock;
+        /*
+         * The framebuffer MMIO region.  Little, if anything, touches
+         * this memory directly, and certainly nothing outside of the
+         * framebuffer device itself.  We *do* have to be able to allocate
+         * chunks of this memory for other devices, though.
+         */
+        unsigned long fbmem_start;
+        long fbmem_len;
+        void __iomem *fbmem;
+#if defined(CONFIG_FB_VIA_CAMERA) || defined(CONFIG_FB_VIA_CAMERA_MODULE)
+        long camera_fbmem_offset;
+        long camera_fbmem_size;
+#endif
+        /*
+         * The MMIO region for device registers.
+         */
+        unsigned long engine_start;
+        unsigned long engine_len;
+        void __iomem *engine_mmio;
+
+};
+
+/*
+ * Interrupt management.
+ */
+
+void viafb_irq_enable(u32 mask);
+void viafb_irq_disable(u32 mask);
+
+/*
+ * The global interrupt control register and its bits.
+ */
+#define VDE_INTERRUPT   0x200   /* Video interrupt flags/masks */
+#define   VDE_I_DVISENSE  0x00000001  /* DVI sense int status */
+#define   VDE_I_VBLANK    0x00000002  /* Vertical blank status */
+#define   VDE_I_MCCFI     0x00000004  /* MCE compl. frame int status */
+#define   VDE_I_VSYNC     0x00000008  /* VGA VSYNC int status */
+#define   VDE_I_DMA0DDONE 0x00000010  /* DMA 0 descr done */
+#define   VDE_I_DMA0TDONE 0x00000020  /* DMA 0 transfer done */
+#define   VDE_I_DMA1DDONE 0x00000040  /* DMA 1 descr done */
+#define   VDE_I_DMA1TDONE 0x00000080  /* DMA 1 transfer done */
+#define   VDE_I_C1AV      0x00000100  /* Cap Eng 1 act vid end */
+#define   VDE_I_HQV0      0x00000200  /* First HQV engine */
+#define   VDE_I_HQV1      0x00000400  /* Second HQV engine */
+#define   VDE_I_HQV1EN    0x00000800  /* Second HQV engine enable */
+#define   VDE_I_C0AV      0x00001000  /* Cap Eng 0 act vid end */
+#define   VDE_I_C0VBI     0x00002000  /* Cap Eng 0 VBI end */
+#define   VDE_I_C1VBI     0x00004000  /* Cap Eng 1 VBI end */
+#define   VDE_I_VSYNC2    0x00008000  /* Sec. Disp. VSYNC */
+#define   VDE_I_DVISNSEN  0x00010000  /* DVI sense enable */
+#define   VDE_I_VSYNC2EN  0x00020000  /* Sec Disp VSYNC enable */
+#define   VDE_I_MCCFIEN   0x00040000  /* MC comp frame int mask enable */
+#define   VDE_I_VSYNCEN   0x00080000  /* VSYNC enable */
+#define   VDE_I_DMA0DDEN  0x00100000  /* DMA 0 descr done enable */
+#define   VDE_I_DMA0TDEN  0x00200000  /* DMA 0 trans done enable */
+#define   VDE_I_DMA1DDEN  0x00400000  /* DMA 1 descr done enable */
+#define   VDE_I_DMA1TDEN  0x00800000  /* DMA 1 trans done enable */
+#define   VDE_I_C1AVEN    0x01000000  /* cap 1 act vid end enable */
+#define   VDE_I_HQV0EN    0x02000000  /* First hqv engine enable */
+#define   VDE_I_C1VBIEN   0x04000000  /* Cap 1 VBI end enable */
+#define   VDE_I_LVDSSI    0x08000000  /* LVDS sense interrupt */
+#define   VDE_I_C0AVEN    0x10000000  /* Cap 0 act vid end enable */
+#define   VDE_I_C0VBIEN   0x20000000  /* Cap 0 VBI end enable */
+#define   VDE_I_LVDSSIEN  0x40000000  /* LVDS Sense enable */
+#define   VDE_I_ENABLE    0x80000000  /* Global interrupt enable */
+
+/*
+ * DMA management.
+ */
+int viafb_request_dma(void);
+void viafb_release_dma(void);
+/* void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len); */
+int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg);
+
+/*
+ * DMA Controller registers.
+ */
+#define VDMA_MR0        0xe00           /* Mod reg 0 */
+#define   VDMA_MR_CHAIN   0x01          /* Chaining mode */
+#define   VDMA_MR_TDIE    0x02          /* Transfer done int enable */
+#define VDMA_CSR0       0xe04           /* Control/status */
+#define   VDMA_C_ENABLE   0x01            /* DMA Enable */
+#define   VDMA_C_START    0x02            /* Start a transfer */
+#define   VDMA_C_ABORT    0x04            /* Abort a transfer */
+#define   VDMA_C_DONE     0x08            /* Transfer is done */
+#define VDMA_MARL0      0xe20           /* Mem addr low */
+#define VDMA_MARH0      0xe24           /* Mem addr high */
+#define VDMA_DAR0       0xe28           /* Device address */
+#define VDMA_DQWCR0     0xe2c           /* Count (16-byte) */
+#define VDMA_TMR0       0xe30           /* Tile mode reg */
+#define VDMA_DPRL0      0xe34           /* Not sure */
+#define   VDMA_DPR_IN     0x08          /* Inbound transfer to FB */
+#define VDMA_DPRH0      0xe38
+#define VDMA_PMR0       (0xe00 + 0x134) /* Pitch mode */
+
+/*
+ * Useful stuff that probably belongs somewhere global.
+ */
+#define VGA_WIDTH       640
+#define VGA_HEIGHT      480
+
+/*
+ * Indexed port operations.  Note that these are all multi-op
+ * functions; every invocation will be racy if you're not holding
+ * reg_lock.
+ */
+
+#define VIAStatus   0x3DA  /* Non-indexed port */
+#define VIACR       0x3D4
+#define VIASR       0x3C4
+#define VIAGR       0x3CE
+#define VIAAR       0x3C0
+
+static inline u8 via_read_reg(u16 port, u8 index)
+{
+        outb(index, port);
+        return inb(port + 1);
+}
+
+static inline void via_write_reg(u16 port, u8 index, u8 data)
+{
+        outb(index, port);
+        outb(data, port + 1);
+}
+
+static inline void via_write_reg_mask(u16 port, u8 index, u8 data, u8 mask)
+{
+        u8 old;
+
+        outb(index, port);
+        old = inb(port + 1);
+        outb((data & mask) | (old & ~mask), port + 1);
+}
+
+#define VIA_MISC_REG_READ       0x03CC
+#define VIA_MISC_REG_WRITE      0x03C2
+
+static inline void via_write_misc_reg_mask(u8 data, u8 mask)
+{
+        u8 old = inb(VIA_MISC_REG_READ);
+        outb((data & mask) | (old & ~mask), VIA_MISC_REG_WRITE);
+}
+
+
+#endif /* __VIA_CORE_H__ */
diff --git a/include/linux/via-gpio.h b/include/linux/via-gpio.h
new file mode 100644
index 000000000000..8281aea3dd6d
--- /dev/null
+++ b/include/linux/via-gpio.h
@@ -0,0 +1,14 @@
+/*
+ * Support for viafb GPIO ports.
+ *
+ * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+ * Distributable under version 2 of the GNU General Public License.
+ */
+
+#ifndef __VIA_GPIO_H__
+#define __VIA_GPIO_H__
+
+extern int viafb_gpio_lookup(const char *name);
+extern int viafb_gpio_init(void);
+extern void viafb_gpio_exit(void);
+#endif
diff --git a/include/linux/via_i2c.h b/include/linux/via_i2c.h
new file mode 100644
index 000000000000..44532e468c05
--- /dev/null
+++ b/include/linux/via_i2c.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __VIA_I2C_H__
+#define __VIA_I2C_H__
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+struct via_i2c_stuff {
+        u16 i2c_port;                   /* GPIO or I2C port */
+        u16 is_active;                  /* Being used as I2C? */
+        struct i2c_adapter adapter;
+        struct i2c_algo_bit_data algo;
+};
+
+
+int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata);
+int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data);
+int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len);
+struct i2c_adapter *viafb_find_i2c_adapter(enum viafb_i2c_adap which);
+
+extern int viafb_i2c_init(void);
+extern void viafb_i2c_exit(void);
+#endif /* __VIA_I2C_H__ */