aboutsummaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorGiuseppe Cavallaro <peppe.cavallaro@st.com>2010-09-28 04:41:29 -0400
committerChris Ball <cjb@laptop.org>2010-10-23 09:11:17 -0400
commit1978fda85dfdb53623dddb4ec126163a61ab3933 (patch)
tree8d49006a8b6740819d215b1b5bf9a46fec8a943e /include
parent8364248a829d50495a796e7561aaf9a6976f846c (diff)
mmc: sdhci: split up sdhci.h for sdhci-pltfm users
Some platforms based on sdhci-pltfm need to set their own quirks. Previously to this patch, the quirks were in drivers/mmc/host/sdhci.h. This patch splits drivers/mmc/host/sdhci.h into two parts: * drivers/mmc/host/sdhci.h includes the HC registers and I/O accessors. * include/linux/mmc/sdhci.h includes the sdhci structure and quirks. Instead of including drivers/mmc/host/sdhci.h, -pltfm drivers should now include include/linux/mmc/sdhci.h and include/linux/sdhci-pltfm.h. This patch avoids adding/changing the calls/flags in the sdhci_pltfm_data structure. It has been tested on STM platforms (e.g. STx7106, STx7108, STx5206) where the driver is configured and used as shown in the example below: [snip] static int mmc_pad_resources(struct sdhci_host *sdhci) { if (!devm_stm_pad_claim(sdhci->mmc->parent, &stx7108_mmc_pad_config, dev_name(sdhci->mmc->parent))) return -ENODEV; return 0; } static struct sdhci_pltfm_data stx7108_mmc_platform_data = { .init = mmc_pad_resources, .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, }; static struct platform_device stx7108_mmc_device = { .name = "sdhci", [snip] Note: drivers/mmc/host/sdhci.h now also includes linux/mmc/sdhci.h, and no modifications should be needed on other sdhci-<XXX> drivers. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'include')
-rw-r--r--include/linux/mmc/sdhci.h144
1 files changed, 144 insertions, 0 deletions
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
new file mode 100644
index 000000000000..1fdc673f2396
--- /dev/null
+++ b/include/linux/mmc/sdhci.h
@@ -0,0 +1,144 @@
1/*
2 * linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
3 *
4 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
10 */
11#ifndef __SDHCI_H
12#define __SDHCI_H
13
14#include <linux/scatterlist.h>
15#include <linux/compiler.h>
16#include <linux/types.h>
17#include <linux/io.h>
18#include <linux/mmc/host.h>
19
20struct sdhci_host {
21 /* Data set by hardware interface driver */
22 const char *hw_name; /* Hardware bus name */
23
24 unsigned int quirks; /* Deviations from spec. */
25
26/* Controller doesn't honor resets unless we touch the clock register */
27#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
28/* Controller has bad caps bits, but really supports DMA */
29#define SDHCI_QUIRK_FORCE_DMA (1<<1)
30/* Controller doesn't like to be reset when there is no card inserted. */
31#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
32/* Controller doesn't like clearing the power reg before a change */
33#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
34/* Controller has flaky internal state so reset it on each ios change */
35#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
36/* Controller has an unusable DMA engine */
37#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
38/* Controller has an unusable ADMA engine */
39#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
40/* Controller can only DMA from 32-bit aligned addresses */
41#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
42/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
43#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
44/* Controller can only ADMA chunks that are a multiple of 32 bits */
45#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
46/* Controller needs to be reset after each request to stay stable */
47#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
48/* Controller needs voltage and power writes to happen separately */
49#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
50/* Controller provides an incorrect timeout value for transfers */
51#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
52/* Controller has an issue with buffer bits for small transfers */
53#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
54/* Controller does not provide transfer-complete interrupt when not busy */
55#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
56/* Controller has unreliable card detection */
57#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
58/* Controller reports inverted write-protect state */
59#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
60/* Controller has nonstandard clock management */
61#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
62/* Controller does not like fast PIO transfers */
63#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
64/* Controller losing signal/interrupt enable states after reset */
65#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
66/* Controller has to be forced to use block size of 2048 bytes */
67#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
68/* Controller cannot do multi-block transfers */
69#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
70/* Controller can only handle 1-bit data transfers */
71#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
72/* Controller needs 10ms delay between applying power and clock */
73#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
74/* Controller uses SDCLK instead of TMCLK for data timeouts */
75#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
76/* Controller reports wrong base clock capability */
77#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
78/* Controller cannot support End Attribute in NOP ADMA descriptor */
79#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
80/* Controller is missing device caps. Use caps provided by host */
81#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
82/* Controller uses Auto CMD12 command to stop the transfer */
83#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
84/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
85#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
86
87 int irq; /* Device IRQ */
88 void __iomem *ioaddr; /* Mapped address */
89
90 const struct sdhci_ops *ops; /* Low level hw interface */
91
92 struct regulator *vmmc; /* Power regulator */
93
94 /* Internal data */
95 struct mmc_host *mmc; /* MMC structure */
96 u64 dma_mask; /* custom DMA mask */
97
98#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
99 struct led_classdev led; /* LED control */
100 char led_name[32];
101#endif
102
103 spinlock_t lock; /* Mutex */
104
105 int flags; /* Host attributes */
106#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
107#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
108#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
109#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
110
111 unsigned int version; /* SDHCI spec. version */
112
113 unsigned int max_clk; /* Max possible freq (MHz) */
114 unsigned int timeout_clk; /* Timeout freq (KHz) */
115
116 unsigned int clock; /* Current clock (MHz) */
117 u8 pwr; /* Current voltage */
118
119 struct mmc_request *mrq; /* Current request */
120 struct mmc_command *cmd; /* Current command */
121 struct mmc_data *data; /* Current data request */
122 unsigned int data_early:1; /* Data finished before cmd */
123
124 struct sg_mapping_iter sg_miter; /* SG state for PIO */
125 unsigned int blocks; /* remaining PIO blocks */
126
127 int sg_count; /* Mapped sg entries */
128
129 u8 *adma_desc; /* ADMA descriptor table */
130 u8 *align_buffer; /* Bounce buffer */
131
132 dma_addr_t adma_addr; /* Mapped ADMA descr. table */
133 dma_addr_t align_addr; /* Mapped bounce buffer */
134
135 struct tasklet_struct card_tasklet; /* Tasklet structures */
136 struct tasklet_struct finish_tasklet;
137
138 struct timer_list timer; /* Timer for timeouts */
139
140 unsigned int caps; /* Alternative capabilities */
141
142 unsigned long private[0] ____cacheline_aligned;
143};
144#endif /* __SDHCI_H */