cpm2: Rework baud rate generators configuration to support external clocks.

The CPM2 BRG setup functions cpm_setbrg and cpm2_fastbrg don't support
external clocks. This patch adds a new exported __cpm2_setbrg function
that takes the clock rate and clock source as extra parameters, and moves
cpm_setbrg and cpm2_fastbrg to include/asm-powerpc/cpm2.h where they
become inline wrappers around __cpm2_setbrg.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 33 insertions, 13 deletions

diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 2c7fd9cee291..2a6fa0183ac9 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -12,6 +12,7 @@
 
 #include <asm/immap_cpm2.h>
 #include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
 
 #ifdef CONFIG_PPC_85xx
 #define CPM_MAP_ADDR (get_immrbase() + 0x80000)
@@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
 #define cpm_dpfree cpm_muram_free
 #define cpm_dpram_addr cpm_muram_addr
 
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
 extern void cpm2_reset(void);
 
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST             ((uint)0x00020000)
+#define CPM_BRG_EN              ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT        ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9     ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15    ((uint)0x00008000)
+#define CPM_BRG_ATB             ((uint)0x00002000)
+#define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
+#define CPM_BRG_DIV16           ((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK        (get_brgfreq())
+#define CPM2_BRG_UART_CLK       (CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+        __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+        __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
 /* Function code bits, usually generic to devices.
 */
 #define CPMFCR_GBL      ((u_char)0x20)  /* Set memory snooping */
@@ -195,17 +226,6 @@ typedef struct smc_uart {
 #define SMCM_TX         ((unsigned char)0x02)
 #define SMCM_RX         ((unsigned char)0x01)
 
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST             ((uint)0x00020000)
-#define CPM_BRG_EN              ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT        ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9     ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15    ((uint)0x00008000)
-#define CPM_BRG_ATB             ((uint)0x00002000)
-#define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
-#define CPM_BRG_DIV16           ((uint)0x00000001)
-
 /* SCCs.
 */
 #define SCC_GSMRH_IRP           ((uint)0x00040000)