Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (4290): Add support for the TCL M2523_3DB_E tuner.
  V4L/DVB (4289): Missing statement in drivers/media/dvb/frontends/cx22700.c
  V4L/DVB (4288): Clean out a zillion sparse warnings in pvrusb2
  V4L/DVB (4287): Pvrusb2/: possible cleanups
  V4L/DVB (4285): Cx88: add support for Geniatech Digistar / Digiwave 103g
  V4L/DVB (4284): Cx24123: fix set_voltage function according to the specs
  V4L/DVB (4282): Fix: use swzigzag for swalgo
  V4L/DVB (4281): TDA9887_SET_CONFIG should only be handled by the tda9887.
  V4L/DVB (4277): Fix CI interface on PRO KNC1 cards
  V4L/DVB (4276): Fix CI on old KNC1 DVBC cards
  V4L/DVB (4275): The FE_SET_FRONTEND_TUNE_MODE ioctl always returns EOPNOTSUPP
  V4L/DVB (4274): Eliminate use of tda9887 from pvrusb2 driver
  V4L/DVB (4273): Always log pvrusb2 device register / unregister events
  V4L/DVB (4272): Fix tveeprom supported standards
  V4L/DVB (4270): Add tda9887-specific tuner configuration
  V4L/DVB (4269): Subject: videocodec: make 1-bit fields unsigned
  V4L/DVB (4267): Remove all instances of request_module("tda9887")
  V4L/DVB (4264): Cx88-blackbird: implement VIDIOC_QUERYCTRL and VIDIOC_QUERYMENU

1 files changed, 55 insertions, 0 deletions

diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
index ad9c171bfa07..3c43b95f4c0d 100644
--- a/include/media/tuner-types.h
+++ b/include/media/tuner-types.h
@@ -20,6 +20,7 @@ struct tuner_range {
 
 struct tuner_params {
         enum param_type type;
+
         /* Many Philips based tuners have a comment like this in their
          * datasheet:
          *
@@ -39,6 +40,60 @@ struct tuner_params {
          * static unless the control byte was sent first.
          */
         unsigned int cb_first_if_lower_freq:1;
+        /* Set to 1 if this tuner uses a tda9887 */
+        unsigned int has_tda9887:1;
+        /* Many Philips tuners use tda9887 PORT1 to select the FM radio
+           sensitivity. If this setting is 1, then set PORT1 to 1 to
+           get proper FM reception. */
+        unsigned int port1_fm_high_sensitivity:1;
+        /* Some Philips tuners use tda9887 PORT2 to select the FM radio
+           sensitivity. If this setting is 1, then set PORT2 to 1 to
+           get proper FM reception. */
+        unsigned int port2_fm_high_sensitivity:1;
+        /* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
+           use Intercarrier mode. If this setting is 1, then the tuner
+           needs to be set to intercarrier mode. */
+        unsigned int intercarrier_mode:1;
+        /* This setting sets the default value for PORT1.
+           0 means inactive, 1 means active. Note: the actual bit
+           value written to the tda9887 is inverted. So a 0 here
+           means a 1 in the B6 bit. */
+        unsigned int port1_active:1;
+        /* This setting sets the default value for PORT2.
+           0 means inactive, 1 means active. Note: the actual bit
+           value written to the tda9887 is inverted. So a 0 here
+           means a 1 in the B7 bit. */
+        unsigned int port2_active:1;
+        /* Sometimes PORT1 is inverted when the SECAM-L' standard is selected.
+           Set this bit to 1 if this is needed. */
+        unsigned int port1_invert_for_secam_lc:1;
+        /* Sometimes PORT2 is inverted when the SECAM-L' standard is selected.
+           Set this bit to 1 if this is needed. */
+        unsigned int port2_invert_for_secam_lc:1;
+        /* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */
+        unsigned int port1_set_for_fm_mono:1;
+        /* Default tda9887 TOP value in dB for the low band. Default is 0.
+           Range: -16:+15 */
+        signed int default_top_low:5;
+        /* Default tda9887 TOP value in dB for the mid band. Default is 0.
+           Range: -16:+15 */
+        signed int default_top_mid:5;
+        /* Default tda9887 TOP value in dB for the high band. Default is 0.
+           Range: -16:+15 */
+        signed int default_top_high:5;
+        /* Default tda9887 TOP value in dB for SECAM-L/L' for the low band.
+           Default is 0. Several tuners require a different TOP value for
+           the SECAM-L/L' standards. Range: -16:+15 */
+        signed int default_top_secam_low:5;
+        /* Default tda9887 TOP value in dB for SECAM-L/L' for the mid band.
+           Default is 0. Several tuners require a different TOP value for
+           the SECAM-L/L' standards. Range: -16:+15 */
+        signed int default_top_secam_mid:5;
+        /* Default tda9887 TOP value in dB for SECAM-L/L' for the high band.
+           Default is 0. Several tuners require a different TOP value for
+           the SECAM-L/L' standards. Range: -16:+15 */
+        signed int default_top_secam_high:5;
+
 
         unsigned int count;
         struct tuner_range *ranges;