[MIPS] PMC MSP71xx PCI support

Patch to add PCI support for the PMC-Sierra MSP71xx devices.

Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 205 insertions, 0 deletions

diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h b/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h
new file mode 100644
index 000000000000..415606903617
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2000-2006 PMC-Sierra INC.
+ *
+ *     This program is free software; you can redistribute it
+ *     and/or modify it under the terms of the GNU General
+ *     Public License as published by the Free Software
+ *     Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     This program is distributed in the hope that it will be
+ *     useful, but WITHOUT ANY WARRANTY; without even the implied
+ *     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ *     PURPOSE.  See the GNU General Public License for more
+ *     details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this program; if not, write to the Free
+ *     Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ *     02139, USA.
+ *
+ * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
+ * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
+ * SOFTWARE.
+ */
+
+#ifndef _MSP_PCI_H_
+#define _MSP_PCI_H_
+
+#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
+
+/*
+ * It is convenient to program the OATRAN register so that
+ * Athena virtual address space and PCI address space are
+ * the same. This is not a requirement, just a convenience.
+ *
+ * The only hard restrictions on the value of OATRAN is that
+ * OATRAN must not be programmed to allow translated memory
+ * addresses to fall within the lowest 512MB of
+ * PCI address space. This region is hardcoded
+ * for use as Athena PCI Host Controller target
+ * access memory space to the Athena's SDRAM.
+ *
+ * Note that OATRAN applies only to memory accesses, not
+ * to I/O accesses.
+ *
+ * To program OATRAN to make Athena virtual address space
+ * and PCI address space have the same values, OATRAN
+ * is to be programmed to 0xB8000000. The top seven
+ * bits of the value mimic the seven bits clipped off
+ * by the PCI Host controller.
+ *
+ * With OATRAN at the said value, when the CPU does
+ * an access to its virtual address at, say 0xB900_5000,
+ * the address appearing on the PCI bus will be
+ * 0xB900_5000.
+ *    - Michael Penner
+ */
+#define MSP_PCI_OATRAN          0xB8000000UL
+
+#define MSP_PCI_SPACE_BASE      (MSP_PCI_OATRAN + 0x1002000UL)
+#define MSP_PCI_SPACE_SIZE      (0x3000000UL - 0x2000)
+#define MSP_PCI_SPACE_END \
+                (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
+#define MSP_PCI_IOSPACE_BASE    (MSP_PCI_OATRAN + 0x1001000UL)
+#define MSP_PCI_IOSPACE_SIZE    0x1000
+#define MSP_PCI_IOSPACE_END  \
+                (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
+
+/* IRQ for PCI status interrupts */
+#define PCI_STAT_IRQ    20
+
+#define QFLUSH_REG_1    0xB7F40000
+
+typedef volatile unsigned int pcireg;
+typedef void * volatile ppcireg;
+
+struct pci_block_copy
+{
+    pcireg   unused1; /* +0x00 */
+    pcireg   unused2; /* +0x04 */
+    ppcireg  unused3; /* +0x08 */
+    ppcireg  unused4; /* +0x0C */
+    pcireg   unused5; /* +0x10 */
+    pcireg   unused6; /* +0x14 */
+    pcireg   unused7; /* +0x18 */
+    ppcireg  unused8; /* +0x1C */
+    ppcireg  unused9; /* +0x20 */
+    pcireg   unusedA; /* +0x24 */
+    ppcireg  unusedB; /* +0x28 */
+    ppcireg  unusedC; /* +0x2C */
+};
+
+enum
+{
+    config_device_vendor,  /* 0 */
+    config_status_command, /* 1 */
+    config_class_revision, /* 2 */
+    config_BIST_header_latency_cache, /* 3 */
+    config_BAR0,           /* 4 */
+    config_BAR1,           /* 5 */
+    config_BAR2,           /* 6 */
+    config_not_used7,      /* 7 */
+    config_not_used8,      /* 8 */
+    config_not_used9,      /* 9 */
+    config_CIS,            /* 10 */
+    config_subsystem,      /* 11 */
+    config_not_used12,     /* 12 */
+    config_capabilities,   /* 13 */
+    config_not_used14,     /* 14 */
+    config_lat_grant_irq,  /* 15 */
+    config_message_control,/* 16 */
+    config_message_addr,   /* 17 */
+    config_message_data,   /* 18 */
+    config_VPD_addr,       /* 19 */
+    config_VPD_data,       /* 20 */
+    config_maxregs         /* 21 - number of registers */
+};
+
+struct msp_pci_regs
+{
+    pcireg hop_unused_00; /* +0x00 */
+    pcireg hop_unused_04; /* +0x04 */
+    pcireg hop_unused_08; /* +0x08 */
+    pcireg hop_unused_0C; /* +0x0C */
+    pcireg hop_unused_10; /* +0x10 */
+    pcireg hop_unused_14; /* +0x14 */
+    pcireg hop_unused_18; /* +0x18 */
+    pcireg hop_unused_1C; /* +0x1C */
+    pcireg hop_unused_20; /* +0x20 */
+    pcireg hop_unused_24; /* +0x24 */
+    pcireg hop_unused_28; /* +0x28 */
+    pcireg hop_unused_2C; /* +0x2C */
+    pcireg hop_unused_30; /* +0x30 */
+    pcireg hop_unused_34; /* +0x34 */
+    pcireg if_control;    /* +0x38 */
+    pcireg oatran;        /* +0x3C */
+    pcireg reset_ctl;     /* +0x40 */
+    pcireg config_addr;   /* +0x44 */
+    pcireg hop_unused_48; /* +0x48 */
+    pcireg msg_signaled_int_status; /* +0x4C */
+    pcireg msg_signaled_int_mask;   /* +0x50 */
+    pcireg if_status;     /* +0x54 */
+    pcireg if_mask;       /* +0x58 */
+    pcireg hop_unused_5C; /* +0x5C */
+    pcireg hop_unused_60; /* +0x60 */
+    pcireg hop_unused_64; /* +0x64 */
+    pcireg hop_unused_68; /* +0x68 */
+    pcireg hop_unused_6C; /* +0x6C */
+    pcireg hop_unused_70; /* +0x70 */
+
+    struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
+
+    pcireg error_hdr1; /* +0xE0 */
+    pcireg error_hdr2; /* +0xE4 */
+
+    pcireg config[config_maxregs] __attribute__((aligned(256)));
+
+};
+
+#define BPCI_CFGADDR_BUSNUM_SHF 16
+#define BPCI_CFGADDR_FUNCTNUM_SHF 8
+#define BPCI_CFGADDR_REGNUM_SHF 2
+#define BPCI_CFGADDR_ENABLE (1<<31)
+
+#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
+#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
+#define BPCI_IFCONTROL_CTO_SHF 12  /* Shift count for CTO bits */
+#define BPCI_IFCONTROL_SE  (1<<5)  /* Enable exceptions on errors */
+#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
+#define BPCI_IFCONTROL_CAP (1<<3)  /* Enable capabilities */
+#define BPCI_IFCONTROL_MMC_SHF 0   /* Shift count for MMC bits */
+
+#define BPCI_IFSTATUS_MGT  (1<<8)  /* Master Grant timeout */
+#define BPCI_IFSTATUS_MTT  (1<<9)  /* Master TRDY timeout */
+#define BPCI_IFSTATUS_MRT  (1<<10) /* Master retry timeout */
+#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
+#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
+#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
+#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
+#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
+#define BPCI_IFSTATUS_RTO  (1<<18) /* Retry time out */
+#define BPCI_IFSTATUS_SER  (1<<19) /* System error */
+#define BPCI_IFSTATUS_PER  (1<<20) /* Parity error */
+#define BPCI_IFSTATUS_LCA  (1<<21) /* Local CPU abort */
+#define BPCI_IFSTATUS_MEM  (1<<22) /* Memory prot. violation */
+#define BPCI_IFSTATUS_ARB  (1<<23) /* Arbiter timed out */
+#define BPCI_IFSTATUS_STA  (1<<27) /* Signaled target abort */
+#define BPCI_IFSTATUS_TA   (1<<28) /* Target abort */
+#define BPCI_IFSTATUS_MA   (1<<29) /* Master abort */
+#define BPCI_IFSTATUS_PEI  (1<<30) /* Parity error as initiator */
+#define BPCI_IFSTATUS_PET  (1<<31) /* Parity error as target */
+
+#define BPCI_RESETCTL_PR (1<<0)    /* True if reset asserted */
+#define BPCI_RESETCTL_RT (1<<4)    /* Release time */
+#define BPCI_RESETCTL_CT (1<<8)    /* Config time */
+#define BPCI_RESETCTL_PE (1<<12)   /* PCI enabled */
+#define BPCI_RESETCTL_HM (1<<13)   /* PCI host mode */
+#define BPCI_RESETCTL_RI (1<<14)   /* PCI reset in */
+
+extern struct msp_pci_regs msp_pci_regs
+                        __attribute__((section(".register")));
+extern unsigned long msp_pci_config_space
+                        __attribute__((section(".register")));
+
+#endif /* !_MSP_PCI_H_ */