Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

112 files changed, 0 insertions, 7406 deletions

diff --git a/include/asm-arm26/a.out.h b/include/asm-arm26/a.out.h
deleted file mode 100644
index 7167f54ae3fc..000000000000
--- a/include/asm-arm26/a.out.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __ARM_A_OUT_H__
-#define __ARM_A_OUT_H__
-
-#include <linux/personality.h>
-#include <asm/types.h>
-
-struct exec
-{
-  __u32 a_info;         /* Use macros N_MAGIC, etc for access */
-  __u32 a_text;         /* length of text, in bytes */
-  __u32 a_data;         /* length of data, in bytes */
-  __u32 a_bss;          /* length of uninitialized data area for file, in bytes */
-  __u32 a_syms;         /* length of symbol table data in file, in bytes */
-  __u32 a_entry;        /* start address */
-  __u32 a_trsize;       /* length of relocation info for text, in bytes */
-  __u32 a_drsize;       /* length of relocation info for data, in bytes */
-};
-
-/*
- * This is always the same
- */
-#define N_TXTADDR(a)    (0x00008000)
-
-#define N_TRSIZE(a)     ((a).a_trsize)
-#define N_DRSIZE(a)     ((a).a_drsize)
-#define N_SYMSIZE(a)    ((a).a_syms)
-
-#define M_ARM 103
-
-#ifdef __KERNEL__
-#define STACK_TOP       TASK_SIZE
-#define STACK_TOP_MAX   STACK_TOP
-#endif
-
-#ifndef LIBRARY_START_TEXT
-#define LIBRARY_START_TEXT      (0x00c00000)
-#endif
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-arm26/assembler.h b/include/asm-arm26/assembler.h
deleted file mode 100644
index bb507a9a4a55..000000000000
--- a/include/asm-arm26/assembler.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/include/asm-arm26/assembler.h
- *
- * This file contains arm architecture specific defines
- * for the different processors.
- *
- * Do not include any C declarations in this file - it is included by
- * assembler source.
- */
-#ifndef __ASSEMBLY__
-#error "Only include this from assembly code"
-#endif
-
-/*
- * Endian independent macros for shifting bytes within registers.
- */
-#define pull            lsr
-#define push            lsl
-#define byte(x)         (x*8)
-
-#ifdef __STDC__
-#define LOADREGS(cond, base, reglist...)\
-        ldm##cond       base,reglist^
-
-#define RETINSTR(instr, regs...)\
-        instr##s        regs
-#else
-#define LOADREGS(cond, base, reglist...)\
-        ldm/**/cond     base,reglist^
-
-#define RETINSTR(instr, regs...)\
-        instr/**/s      regs
-#endif
-
-#define MODENOP\
-        mov     r0, r0
-
-#define MODE(savereg,tmpreg,mode) \
-        mov     savereg, pc; \
-        bic     tmpreg, savereg, $0x0c000003; \
-        orr     tmpreg, tmpreg, $mode; \
-        teqp    tmpreg, $0
-
-#define RESTOREMODE(savereg) \
-        teqp    savereg, $0
-
-#define SAVEIRQS(tmpreg)
-
-#define RESTOREIRQS(tmpreg)
-
-#define DISABLEIRQS(tmpreg)\
-        teqp    pc, $0x08000003
-
-#define ENABLEIRQS(tmpreg)\
-        teqp    pc, $0x00000003
-
-#define USERMODE(tmpreg)\
-        teqp    pc, $0x00000000;\
-        mov     r0, r0
-
-#define SVCMODE(tmpreg)\
-        teqp    pc, $0x00000003;\
-        mov     r0, r0
-
-
-/*
- * Save the current IRQ state and disable IRQs
- * Note that this macro assumes FIQs are enabled, and
- * that the processor is in SVC mode.
- */
-        .macro  save_and_disable_irqs, oldcpsr, temp
-  mov \oldcpsr, pc
-  orr \temp, \oldcpsr, #0x08000000
-  teqp \temp, #0
-  .endm
-
-/*
- * Restore interrupt state previously stored in
- * a register
- * ** Actually do nothing on Arc - hope that the caller uses a MOVS PC soon
- * after!
- */
-        .macro  restore_irqs, oldcpsr
-  @ This be restore_irqs
-  .endm
-
-/*
- * These two are used to save LR/restore PC over a user-based access.
- * The old 26-bit architecture requires that we save lr (R14)
- */
-        .macro  save_lr
-        str     lr, [sp, #-4]!
-        .endm
-
-        .macro  restore_pc
-        ldmfd   sp!, {pc}^
-        .endm
-
-#define USER(x...)                              \
-9999:   x;                                      \
-        .section __ex_table,"a";                \
-        .align  3;                              \
-        .long   9999b,9001f;                    \
-        .previous
-
-
diff --git a/include/asm-arm26/atomic.h b/include/asm-arm26/atomic.h
deleted file mode 100644
index d6dd42374cf3..000000000000
--- a/include/asm-arm26/atomic.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- *  linux/include/asm-arm26/atomic.h
- *
- *  Copyright (c) 1996 Russell King.
- *  Modified for arm26 by Ian Molton
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   25-11-2004 IM      Updated for 2.6.9
- *   27-06-1996 RMK     Created
- *   13-04-1997 RMK     Made functions atomic!
- *   07-12-1997 RMK     Upgraded for v2.1.
- *   26-08-1998 PJB     Added #ifdef __KERNEL__
- *
- *  FIXME - its probably worth seeing what these compile into...
- */
-#ifndef __ASM_ARM_ATOMIC_H
-#define __ASM_ARM_ATOMIC_H
-
-#ifdef CONFIG_SMP
-#error SMP is NOT supported
-#endif
-
-typedef struct { volatile int counter; } atomic_t;
-
-#define ATOMIC_INIT(i)  { (i) }
-
-#ifdef __KERNEL__
-#include <asm/system.h>
-
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v,i) (((v)->counter) = (i))
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-        unsigned long flags;
-        int val;
-
-        local_irq_save(flags);
-        val = v->counter;
-        v->counter = val += i;
-        local_irq_restore(flags);
-
-        return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-        unsigned long flags;
-        int val;
-
-        local_irq_save(flags);
-        val = v->counter;
-        v->counter = val -= i;
-        local_irq_restore(flags);
-
-        return val;
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-        int ret;
-        unsigned long flags;
-
-        local_irq_save(flags);
-        ret = v->counter;
-        if (likely(ret == old))
-                v->counter = new;
-        local_irq_restore(flags);
-
-        return ret;
-}
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-        int ret;
-        unsigned long flags;
-
-        local_irq_save(flags);
-        ret = v->counter;
-        if (ret != u)
-                v->counter += a;
-        local_irq_restore(flags);
-
-        return ret != u;
-}
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-        unsigned long flags;
-
-        local_irq_save(flags);
-        *addr &= ~mask;
-        local_irq_restore(flags);
-}
-
-#define atomic_add(i, v)        (void) atomic_add_return(i, v)
-#define atomic_inc(v)           (void) atomic_add_return(1, v)
-#define atomic_sub(i, v)        (void) atomic_sub_return(i, v)
-#define atomic_dec(v)           (void) atomic_sub_return(1, v)
-
-#define atomic_inc_and_test(v)  (atomic_add_return(1, v) == 0)
-#define atomic_dec_and_test(v)  (atomic_sub_return(1, v) == 0)
-#define atomic_inc_return(v)    (atomic_add_return(1, v))
-#define atomic_dec_return(v)    (atomic_sub_return(1, v))
-
-#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
-
-/* Atomic operations are already serializing on ARM26 */
-#define smp_mb__before_atomic_dec()     barrier()
-#define smp_mb__after_atomic_dec()      barrier()
-#define smp_mb__before_atomic_inc()     barrier()
-#define smp_mb__after_atomic_inc()      barrier()
-
-#include <asm-generic/atomic.h>
-#endif
-#endif
diff --git a/include/asm-arm26/auxvec.h b/include/asm-arm26/auxvec.h
deleted file mode 100644
index c0536f6b29a7..000000000000
--- a/include/asm-arm26/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMARM_AUXVEC_H
-#define __ASMARM_AUXVEC_H
-
-#endif
diff --git a/include/asm-arm26/bitops.h b/include/asm-arm26/bitops.h
deleted file mode 100644
index 19a69573a654..000000000000
--- a/include/asm-arm26/bitops.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Copyright 1995, Russell King.
- *
- * Based on the arm32 version by RMK (and others). Their copyrights apply to
- * Those parts.
- * Modified for arm26 by Ian Molton on 25/11/04
- *
- * bit 0 is the LSB of an "unsigned long" quantity.
- *
- * Please note that the code in this file should never be included
- * from user space.  Many of these are not implemented in assembler
- * since they would be too costly.  Also, they require privileged
- * instructions (which are not available from user mode) to ensure
- * that they are atomic.
- */
-
-#ifndef __ASM_ARM_BITOPS_H
-#define __ASM_ARM_BITOPS_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/system.h>
-
-#define smp_mb__before_clear_bit()      do { } while (0)
-#define smp_mb__after_clear_bit()       do { } while (0)
-
-/*
- * These functions are the basis of our bit ops.
- *
- * First, the atomic bitops. These use native endian.
- */
-static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
-{
-        unsigned long flags;
-        unsigned long mask = 1UL << (bit & 31);
-
-        p += bit >> 5;
-
-        local_irq_save(flags);
-        *p |= mask;
-        local_irq_restore(flags);
-}
-
-static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
-{
-        unsigned long flags;
-        unsigned long mask = 1UL << (bit & 31);
-
-        p += bit >> 5;
-
-        local_irq_save(flags);
-        *p &= ~mask;
-        local_irq_restore(flags);
-}
-
-static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
-{
-        unsigned long flags;
-        unsigned long mask = 1UL << (bit & 31);
-
-        p += bit >> 5;
-
-        local_irq_save(flags);
-        *p ^= mask;
-        local_irq_restore(flags);
-}
-
-static inline int
-____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
-{
-        unsigned long flags;
-        unsigned int res;
-        unsigned long mask = 1UL << (bit & 31);
-
-        p += bit >> 5;
-
-        local_irq_save(flags);
-        res = *p;
-        *p = res | mask;
-        local_irq_restore(flags);
-
-        return res & mask;
-}
-
-static inline int
-____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
-{
-        unsigned long flags;
-        unsigned int res;
-        unsigned long mask = 1UL << (bit & 31);
-
-        p += bit >> 5;
-
-        local_irq_save(flags);
-        res = *p;
-        *p = res & ~mask;
-        local_irq_restore(flags);
-
-        return res & mask;
-}
-
-static inline int
-____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
-{
-        unsigned long flags;
-        unsigned int res;
-        unsigned long mask = 1UL << (bit & 31);
-
-        p += bit >> 5;
-
-        local_irq_save(flags);
-        res = *p;
-        *p = res ^ mask;
-        local_irq_restore(flags);
-
-        return res & mask;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-/*
- * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
- */
-extern void _set_bit_le(int nr, volatile unsigned long * p);
-extern void _clear_bit_le(int nr, volatile unsigned long * p);
-extern void _change_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
-extern int _find_first_zero_bit_le(const unsigned long * p, unsigned size);
-extern int _find_next_zero_bit_le(void * p, int size, int offset);
-extern int _find_first_bit_le(const unsigned long *p, unsigned size);
-extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
-
-/*
- * The __* form of bitops are non-atomic and may be reordered.
- */
-#define ATOMIC_BITOP_LE(name,nr,p)              \
-        (__builtin_constant_p(nr) ?             \
-         ____atomic_##name(nr, p) :             \
-         _##name##_le(nr,p))
-
-#define NONATOMIC_BITOP(name,nr,p)              \
-        (____nonatomic_##name(nr, p))
-
-/*
- * These are the little endian, atomic definitions.
- */
-#define set_bit(nr,p)                   ATOMIC_BITOP_LE(set_bit,nr,p)
-#define clear_bit(nr,p)                 ATOMIC_BITOP_LE(clear_bit,nr,p)
-#define change_bit(nr,p)                ATOMIC_BITOP_LE(change_bit,nr,p)
-#define test_and_set_bit(nr,p)          ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)        ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)       ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
-#define find_first_zero_bit(p,sz)       _find_first_zero_bit_le(p,sz)
-#define find_next_zero_bit(p,sz,off)    _find_next_zero_bit_le(p,sz,off)
-#define find_first_bit(p,sz)            _find_first_bit_le(p,sz)
-#define find_next_bit(p,sz,off)         _find_next_bit_le(p,sz,off)
-
-#define WORD_BITOFF_TO_LE(x)            ((x))
-
-#include <asm-generic/bitops/ffz.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-
-/*
- * Ext2 is defined to use little-endian byte ordering.
- * These do not need to be atomic.
- */
-#define ext2_set_bit(nr,p)                      \
-                __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_set_bit_atomic(lock,nr,p)          \
-                test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_clear_bit(nr,p)                    \
-                __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_clear_bit_atomic(lock,nr,p)        \
-                test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_test_bit(nr,p)                     \
-                test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_find_first_zero_bit(p,sz)          \
-                _find_first_zero_bit_le(p,sz)
-#define ext2_find_next_zero_bit(p,sz,off)       \
-                _find_next_zero_bit_le(p,sz,off)
-
-/*
- * Minix is defined to use little-endian byte ordering.
- * These do not need to be atomic.
- */
-#define minix_set_bit(nr,p)                     \
-                __set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_test_bit(nr,p)                    \
-                test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_test_and_set_bit(nr,p)            \
-                __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_test_and_clear_bit(nr,p)          \
-                __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_find_first_zero_bit(p,sz)         \
-                _find_first_zero_bit_le((unsigned long *)(p),sz)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ARM_BITOPS_H */
diff --git a/include/asm-arm26/bug.h b/include/asm-arm26/bug.h
deleted file mode 100644
index 8545d58b0475..000000000000
--- a/include/asm-arm26/bug.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASMARM_BUG_H
-#define _ASMARM_BUG_H
-
-
-#ifdef CONFIG_BUG
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-extern volatile void __bug(const char *file, int line, void *data);
-/* give file/line information */
-#define BUG()           __bug(__FILE__, __LINE__, NULL)
-#else
-#define BUG()           (*(int *)0 = 0)
-#endif
-
-#define HAVE_ARCH_BUG
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif
diff --git a/include/asm-arm26/bugs.h b/include/asm-arm26/bugs.h
deleted file mode 100644
index e99ac2e46d7f..000000000000
--- a/include/asm-arm26/bugs.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/include/asm-arm26/bugs.h
- *
- *  Copyright (C) 1995  Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_BUGS_H
-#define __ASM_BUGS_H
-
-#define check_bugs() cpu_check_bugs()
-
-#endif
diff --git a/include/asm-arm26/byteorder.h b/include/asm-arm26/byteorder.h
deleted file mode 100644
index 0b4af9ac76e9..000000000000
--- a/include/asm-arm26/byteorder.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/byteorder.h
- *
- * ARM Endian-ness.  In little endian mode, the data bus is connected such
- * that byte accesses appear as:
- *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- *
- */
-#ifndef __ASM_ARM_BYTEORDER_H
-#define __ASM_ARM_BYTEORDER_H
-
-#include <asm/types.h>
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#include <linux/byteorder/little_endian.h>
-
-#endif
-
diff --git a/include/asm-arm26/cache.h b/include/asm-arm26/cache.h
deleted file mode 100644
index 8c3abcf728fe..000000000000
--- a/include/asm-arm26/cache.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- *  linux/include/asm-arm26/cache.h
- */
-#ifndef __ASMARM_CACHE_H
-#define __ASMARM_CACHE_H
-
-#define        L1_CACHE_SHIFT  5
-#define        L1_CACHE_BYTES  (1 << L1_CACHE_SHIFT)
-#define        L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
-#define        SMP_CACHE_BYTES L1_CACHE_BYTES
-
-#endif
diff --git a/include/asm-arm26/cacheflush.h b/include/asm-arm26/cacheflush.h
deleted file mode 100644
index 14ae15b6faab..000000000000
--- a/include/asm-arm26/cacheflush.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/include/asm-arm/cacheflush.h
- *
- *  Copyright (C) 2000-2002 Russell King
- *  Copyright (C) 2003 Ian Molton
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ARM26 cache 'functions'
- *
- */
-
-#ifndef _ASMARM_CACHEFLUSH_H
-#define _ASMARM_CACHEFLUSH_H
-
-#if 1     //FIXME - BAD INCLUDES!!!
-#include <linux/sched.h>
-#include <linux/mm.h>
-#endif
-
-#define flush_cache_all()                       do { } while (0)
-#define flush_cache_mm(mm)                      do { } while (0)
-#define flush_cache_dup_mm(mm)                  do { } while (0)
-#define flush_cache_range(vma,start,end)        do { } while (0)
-#define flush_cache_page(vma,vmaddr,pfn)        do { } while (0)
-#define flush_cache_vmap(start, end)            do { } while (0)
-#define flush_cache_vunmap(start, end)          do { } while (0)
-
-#define invalidate_dcache_range(start,end)      do { } while (0)
-#define clean_dcache_range(start,end)           do { } while (0)
-#define flush_dcache_range(start,end)           do { } while (0)
-#define flush_dcache_page(page)                 do { } while (0)
-#define flush_dcache_mmap_lock(mapping)         do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
-#define clean_dcache_entry(_s)                  do { } while (0)
-#define clean_cache_entry(_start)               do { } while (0)
-
-#define flush_icache_user_range(start,end, bob, fred) do { } while (0)
-#define flush_icache_range(start,end)           do { } while (0)
-#define flush_icache_page(vma,page)             do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-        memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-        memcpy(dst, src, len)
-
-/* DAG: ARM3 will flush cache on MEMC updates anyway? so don't bother */
-/* IM : Yes, it will, but only if setup to do so (we do this). */
-#define clean_cache_area(_start,_size)          do { } while (0)
-
-#endif
diff --git a/include/asm-arm26/checksum.h b/include/asm-arm26/checksum.h
deleted file mode 100644
index f2b4b0a403bd..000000000000
--- a/include/asm-arm26/checksum.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- *  linux/include/asm-arm/checksum.h
- *
- * IP checksum routines
- *
- * Copyright (C) Original authors of ../asm-i386/checksum.h
- * Copyright (C) 1996-1999 Russell King
- */
-#ifndef __ASM_ARM_CHECKSUM_H
-#define __ASM_ARM_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr);
-
-/*
- *      This is a version of ip_compute_csum() optimized for IP headers,
- *      which always checksum on 4 octet boundaries.
- */
-static inline __sum16
-ip_fast_csum(const void *iph, unsigned int ihl)
-{
-        unsigned int sum, tmp1;
-
-        __asm__ __volatile__(
-        "ldr    %0, [%1], #4            @ ip_fast_csum          \n\
-        ldr     %3, [%1], #4                                    \n\
-        sub     %2, %2, #5                                      \n\
-        adds    %0, %0, %3                                      \n\
-        ldr     %3, [%1], #4                                    \n\
-        adcs    %0, %0, %3                                      \n\
-        ldr     %3, [%1], #4                                    \n\
-1:      adcs    %0, %0, %3                                      \n\
-        ldr     %3, [%1], #4                                    \n\
-        tst     %2, #15                 @ do this carefully     \n\
-        subne   %2, %2, #1              @ without destroying    \n\
-        bne     1b                      @ the carry flag        \n\
-        adcs    %0, %0, %3                                      \n\
-        adc     %0, %0, #0                                      \n\
-        adds    %0, %0, %0, lsl #16                             \n\
-        addcs   %0, %0, #0x10000                                \n\
-        mvn     %0, %0                                          \n\
-        mov     %0, %0, lsr #16"
-        : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
-        : "1" (iph), "2" (ihl)
-        : "cc");
-        return (__force __sum16)sum;
-}
-
-/*
- *      Fold a partial checksum without adding pseudo headers
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
-        __asm__(
-        "adds   %0, %1, %1, lsl #16     @ csum_fold             \n\
-        addcs   %0, %0, #0x10000"
-        : "=r" (sum)
-        : "r" (sum)
-        : "cc");
-        return (__force __sum16)(~(__force u32)sum >> 16);
-}
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-                   unsigned short proto, __wsum sum)
-{
-        __asm__(
-        "adds   %0, %1, %2              @ csum_tcpudp_nofold    \n\
-        adcs    %0, %0, %3                                      \n\
-        adcs    %0, %0, %4                                      \n\
-        adcs    %0, %0, %5                                      \n\
-        adc     %0, %0, #0"
-        : "=&r"(sum)
-        : "r" (sum), "r" (daddr), "r" (saddr), "r" (htons(len)), "Ir" (htons(proto))
-        : "cc");
-        return sum;
-}       
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-                  unsigned short proto, __wsum sum)
-{
-        __asm__(
-        "adds   %0, %1, %2              @ csum_tcpudp_magic     \n\
-        adcs    %0, %0, %3                                      \n\
-        adcs    %0, %0, %4                                      \n\
-        adcs    %0, %0, %5                                      \n\
-        adc     %0, %0, #0                                      \n\
-        adds    %0, %0, %0, lsl #16                             \n\
-        addcs   %0, %0, #0x10000                                \n\
-        mvn     %0, %0"
-        : "=&r"(sum)
-        : "r" (sum), "r" (daddr), "r" (saddr), "r" (htons(len)), "Ir" (htons(proto))
-        : "cc");
-        return (__force __sum16)((__force u32)sum >> 16);
-}
-
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16
-ip_compute_csum(const void *buff, int len)
-{
-        return csum_fold(csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-extern __wsum
-__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len,
-                __be32 proto, __wsum sum);
-
-static inline __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len,
-                unsigned short proto, __wsum sum)
-{
-        return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
-                                           htonl(proto), sum));
-}
-#endif
diff --git a/include/asm-arm26/constants.h b/include/asm-arm26/constants.h
deleted file mode 100644
index 0d0b14415563..000000000000
--- a/include/asm-arm26/constants.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ASM_OFFSETS_H__
-#define __ASM_OFFSETS_H__
-/*
- * DO NOT MODIFY.
- *
- * This file was generated by arch/arm26/Makefile
- *
- */
-
-#define TSK_ACTIVE_MM 96 /* offsetof(struct task_struct, active_mm) */
-
-#define VMA_VM_MM 0 /* offsetof(struct vm_area_struct, vm_mm) */
-#define VMA_VM_FLAGS 20 /* offsetof(struct vm_area_struct, vm_flags) */
-
-#define VM_EXEC 4 /* VM_EXEC */
-
-
-#define PAGE_PRESENT 1 /* L_PTE_PRESENT */
-#define PAGE_READONLY 95 /* PAGE_READONLY */
-#define PAGE_NOT_USER 3 /* PAGE_NONE */
-#define PAGE_OLD 3 /* PAGE_NONE */
-#define PAGE_CLEAN 128 /* L_PTE_DIRTY */
-
-#define PAGE_SZ 32768 /* PAGE_SIZE */
-
-#define SYS_ERROR0 10420224 /* 0x9f0000 */
-
-#endif
diff --git a/include/asm-arm26/cputime.h b/include/asm-arm26/cputime.h
deleted file mode 100644
index d2783a9e47b3..000000000000
--- a/include/asm-arm26/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARM26_CPUTIME_H
-#define __ARM26_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __ARM26_CPUTIME_H */
diff --git a/include/asm-arm26/current.h b/include/asm-arm26/current.h
deleted file mode 100644
index 75d21e2a3ff7..000000000000
--- a/include/asm-arm26/current.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASMARM_CURRENT_H
-#define _ASMARM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-static inline struct task_struct *get_current(void) __attribute_const__;
-
-static inline struct task_struct *get_current(void)
-{
-        return current_thread_info()->task;
-}
-
-#define current (get_current())
-
-#endif /* _ASMARM_CURRENT_H */
diff --git a/include/asm-arm26/delay.h b/include/asm-arm26/delay.h
deleted file mode 100644
index 40fbf7bbe6c2..000000000000
--- a/include/asm-arm26/delay.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_ARM_DELAY_H
-#define __ASM_ARM_DELAY_H
-
-/*
- * Copyright (C) 1995 Russell King
- *
- * Delay routines, using a pre-computed "loops_per_second" value.
- */
-
-extern void __delay(int loops);
-
-/*
- * division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- *
- * FIXME - lets improve it then...
- */
-extern void udelay(unsigned long usecs);
-
-static inline unsigned long muldiv(unsigned long a, unsigned long b, unsigned long c)
-{
-        return a * b / c;
-}
-
-        
-
-#endif /* defined(_ARM_DELAY_H) */
-
diff --git a/include/asm-arm26/device.h b/include/asm-arm26/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-arm26/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-arm26/div64.h b/include/asm-arm26/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-arm26/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-arm26/dma.h b/include/asm-arm26/dma.h
deleted file mode 100644
index 4326ba85eb72..000000000000
--- a/include/asm-arm26/dma.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef __ASM_ARM_DMA_H
-#define __ASM_ARM_DMA_H
-
-typedef unsigned int dmach_t;
-
-#include <linux/spinlock.h>
-#include <asm/system.h>
-#include <asm/memory.h>
-#include <asm/scatterlist.h>
-
-// FIXME - do we really need this? arm26 cant do 'proper' DMA
-
-typedef struct dma_struct dma_t;
-typedef unsigned int dmamode_t;
-
-struct dma_ops {
-        int     (*request)(dmach_t, dma_t *);           /* optional */
-        void    (*free)(dmach_t, dma_t *);              /* optional */
-        void    (*enable)(dmach_t, dma_t *);            /* mandatory */
-        void    (*disable)(dmach_t, dma_t *);           /* mandatory */
-        int     (*residue)(dmach_t, dma_t *);           /* optional */
-        int     (*setspeed)(dmach_t, dma_t *, int);     /* optional */
-        char    *type;
-};
-
-struct dma_struct {
-        struct scatterlist buf;         /* single DMA                   */
-        int             sgcount;        /* number of DMA SG             */
-        struct scatterlist *sg;         /* DMA Scatter-Gather List      */
-
-        unsigned int    active:1;       /* Transfer active              */
-        unsigned int    invalid:1;      /* Address/Count changed        */
-        unsigned int    using_sg:1;     /* using scatter list?          */
-        dmamode_t       dma_mode;       /* DMA mode                     */
-        int             speed;          /* DMA speed                    */
-
-        unsigned int    lock;           /* Device is allocated          */
-        const char      *device_id;     /* Device name                  */
-
-        unsigned int    dma_base;       /* Controller base address      */
-        int             dma_irq;        /* Controller IRQ               */
-        int             state;          /* Controller state             */
-        struct scatterlist cur_sg;      /* Current controller buffer    */
-
-        struct dma_ops  *d_ops;
-};
-
-/* Prototype: void arch_dma_init(dma)
- * Purpose  : Initialise architecture specific DMA
- * Params   : dma - pointer to array of DMA structures
- */
-extern void arch_dma_init(dma_t *dma);
-
-extern void isa_init_dma(dma_t *dma);
-
-
-#define MAX_DMA_ADDRESS         0x03000000
-#define MAX_DMA_CHANNELS        3
-
-/* ARC */
-#define DMA_VIRTUAL_FLOPPY0     0
-#define DMA_VIRTUAL_FLOPPY1     1
-#define DMA_VIRTUAL_SOUND       2
-
-/* A5K */
-#define DMA_FLOPPY              0
-
-/*
- * DMA modes
- */
-#define DMA_MODE_MASK   3
-
-#define DMA_MODE_READ    0
-#define DMA_MODE_WRITE   1
-#define DMA_MODE_CASCADE 2
-#define DMA_AUTOINIT     4
-
-extern spinlock_t  dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
-        unsigned long flags;
-        spin_lock_irqsave(&dma_spin_lock, flags);
-        return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-        spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- */
-#define clear_dma_ff(channel)
-
-/* Set only the page register bits of the transfer address.
- *
- * NOTE: This is an architecture specific function, and should
- *       be hidden from the drivers
- */
-extern void set_dma_page(dmach_t channel, char pagenr);
-
-/* Request a DMA channel
- *
- * Some architectures may need to do allocate an interrupt
- */
-extern int  request_dma(dmach_t channel, const char * device_id);
-
-/* Free a DMA channel
- *
- * Some architectures may need to do free an interrupt
- */
-extern void free_dma(dmach_t channel);
-
-/* Enable DMA for this channel
- *
- * On some architectures, this may have other side effects like
- * enabling an interrupt and setting the DMA registers.
- */
-extern void enable_dma(dmach_t channel);
-
-/* Disable DMA for this channel
- *
- * On some architectures, this may have other side effects like
- * disabling an interrupt or whatever.
- */
-extern void disable_dma(dmach_t channel);
-
-/* Test whether the specified channel has an active DMA transfer
- */
-extern int dma_channel_active(dmach_t channel);
-
-/* Set the DMA scatter gather list for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA address immediately, but defer it to the enable_dma().
- */
-extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
-
-/* Set the DMA address for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA address immediately, but defer it to the enable_dma().
- */
-extern void set_dma_addr(dmach_t channel, unsigned long physaddr);
-
-/* Set the DMA byte count for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA count immediately, but defer it to the enable_dma().
- */
-extern void set_dma_count(dmach_t channel, unsigned long count);
-
-/* Set the transfer direction for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA transfer direction immediately, but defer it to the
- * enable_dma().
- */
-extern void set_dma_mode(dmach_t channel, dmamode_t mode);
-
-/* Set the transfer speed for this channel
- */
-extern void set_dma_speed(dmach_t channel, int cycle_ns);
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-extern int  get_dma_residue(dmach_t channel);
-
-#ifndef NO_DMA
-#define NO_DMA  255
-#endif
-
-#endif /* _ARM_DMA_H */
diff --git a/include/asm-arm26/ecard.h b/include/asm-arm26/ecard.h
deleted file mode 100644
index 66691939c3c1..000000000000
--- a/include/asm-arm26/ecard.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * linux/include/asm-arm26/ecard.h
- *
- * definitions for expansion cards
- *
- * This is a new system as from Linux 1.2.3
- *
- * Changelog:
- *  11-12-1996  RMK     Further minor improvements
- *  12-09-1997  RMK     Added interrupt enable/disable for card level
- *  18-05-2003  IM      Adjusted for ARM26
- *
- * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
- */
-
-#ifndef __ASM_ECARD_H
-#define __ASM_ECARD_H
-
-/*
- * Currently understood cards (but not necessarily
- * supported):
- *                        Manufacturer  Product ID
- */
-#define MANU_ACORN              0x0000
-#define PROD_ACORN_SCSI                 0x0002
-#define PROD_ACORN_ETHER1               0x0003
-#define PROD_ACORN_MFM                  0x000b
-
-#define MANU_CCONCEPTS          0x0009
-#define PROD_CCONCEPTS_COLOURCARD       0x0050
-
-#define MANU_ANT2               0x0011
-#define PROD_ANT_ETHER3                 0x00a4
-
-#define MANU_ATOMWIDE           0x0017
-#define PROD_ATOMWIDE_3PSERIAL          0x0090
-
-#define MANU_IRLAM_INSTRUMENTS  0x001f
-#define MANU_IRLAM_INSTRUMENTS_ETHERN   0x5678
-
-#define MANU_OAK                0x0021
-#define PROD_OAK_SCSI                   0x0058
-
-#define MANU_MORLEY             0x002b
-#define PROD_MORLEY_SCSI_UNCACHED       0x0067
-
-#define MANU_CUMANA             0x003a
-#define PROD_CUMANA_SCSI_2              0x003a
-#define PROD_CUMANA_SCSI_1              0x00a0
-
-#define MANU_ICS                0x003c
-#define PROD_ICS_IDE                    0x00ae
-
-#define MANU_ICS2               0x003d
-#define PROD_ICS2_IDE                   0x00ae
-
-#define MANU_SERPORT            0x003f
-#define PROD_SERPORT_DSPORT             0x00b9
-
-#define MANU_ARXE               0x0041
-#define PROD_ARXE_SCSI                  0x00be
-
-#define MANU_I3                 0x0046
-#define PROD_I3_ETHERLAN500             0x00d4
-#define PROD_I3_ETHERLAN600             0x00ec
-#define PROD_I3_ETHERLAN600A            0x011e
-
-#define MANU_ANT                0x0053
-#define PROD_ANT_ETHERM                 0x00d8
-#define PROD_ANT_ETHERB                 0x00e4
-
-#define MANU_ALSYSTEMS          0x005b
-#define PROD_ALSYS_SCSIATAPI            0x0107
-
-#define MANU_MCS                0x0063
-#define PROD_MCS_CONNECT32              0x0125
-
-#define MANU_EESOX              0x0064
-#define PROD_EESOX_SCSI2                0x008c
-
-#define MANU_YELLOWSTONE        0x0096
-#define PROD_YELLOWSTONE_RAPIDE32       0x0120
-
-#define MANU_SIMTEC             0x005f
-#define PROD_SIMTEC_IDE8                0x0130
-#define PROD_SIMTEC_IDE16               0x0131
-
-
-#ifdef ECARD_C
-#define CONST
-#else
-#define CONST const
-#endif
-
-#define MAX_ECARDS      4
-
-typedef enum {                          /* Cards address space          */
-        ECARD_IOC,
-        ECARD_MEMC,
-        ECARD_EASI
-} card_type_t;
-
-typedef enum {                          /* Speed for ECARD_IOC space    */
-        ECARD_SLOW       = 0,
-        ECARD_MEDIUM     = 1,
-        ECARD_FAST       = 2,
-        ECARD_SYNC       = 3
-} card_speed_t;
-
-struct ecard_id {                       /* Card ID structure            */
-        unsigned short  manufacturer;
-        unsigned short  product;
-        void            *data;
-};
-
-struct in_ecid {                        /* Packed card ID information   */
-        unsigned short  product;        /* Product code                 */
-        unsigned short  manufacturer;   /* Manufacturer code            */
-        unsigned char   id:4;           /* Simple ID                    */
-        unsigned char   cd:1;           /* Chunk dir present            */
-        unsigned char   is:1;           /* Interrupt status pointers    */
-        unsigned char   w:2;            /* Width                        */
-        unsigned char   country;        /* Country                      */
-        unsigned char   irqmask;        /* IRQ mask                     */
-        unsigned char   fiqmask;        /* FIQ mask                     */
-        unsigned long   irqoff;         /* IRQ offset                   */
-        unsigned long   fiqoff;         /* FIQ offset                   */
-};
-
-typedef struct expansion_card ecard_t;
-typedef unsigned long *loader_t;
-
-typedef struct {                        /* Card handler routines        */
-        void (*irqenable)(ecard_t *ec, int irqnr);
-        void (*irqdisable)(ecard_t *ec, int irqnr);
-        int  (*irqpending)(ecard_t *ec);
-        void (*fiqenable)(ecard_t *ec, int fiqnr);
-        void (*fiqdisable)(ecard_t *ec, int fiqnr);
-        int  (*fiqpending)(ecard_t *ec);
-} expansioncard_ops_t;
-
-#define ECARD_NUM_RESOURCES     (6)
-
-#define ECARD_RES_IOCSLOW       (0)
-#define ECARD_RES_IOCMEDIUM     (1)
-#define ECARD_RES_IOCFAST       (2)
-#define ECARD_RES_IOCSYNC       (3)
-#define ECARD_RES_MEMC          (4)
-#define ECARD_RES_EASI          (5)
-
-#define ecard_resource_start(ec,nr)     ((ec)->resource[nr].start)
-#define ecard_resource_end(ec,nr)       ((ec)->resource[nr].end)
-#define ecard_resource_len(ec,nr)       ((ec)->resource[nr].end - \
-                                         (ec)->resource[nr].start + 1)
-
-/*
- * This contains all the info needed on an expansion card
- */
-struct expansion_card {
-        struct expansion_card  *next;
-
-        struct device           dev;
-        struct resource         resource[ECARD_NUM_RESOURCES];
-
-        /* Public data */
-        volatile unsigned char *irqaddr;     /* address of IRQ register */
-        volatile unsigned char *fiqaddr;     /* address of FIQ register */
-        unsigned char           irqmask;     /* IRQ mask */
-        unsigned char           fiqmask;     /* FIQ mask */
-        unsigned char           claimed;     /* Card claimed? */
-
-        void                    *irq_data;   /* Data for use for IRQ by card */
-        void                    *fiq_data;   /* Data for use for FIQ by card */
-        const expansioncard_ops_t *ops;      /* Enable/Disable Ops for card */
-
-        CONST unsigned int      slot_no;     /* Slot number */
-        CONST unsigned int      dma;         /* DMA number (for request_dma) */
-        CONST unsigned int      irq;         /* IRQ number (for request_irq) */
-        CONST unsigned int      fiq;         /* FIQ number (for request_irq) */
-        CONST card_type_t       type;        /* Type of card */
-        CONST struct in_ecid    cid;         /* Card Identification */
-
-        /* Private internal data */
-        const char              *card_desc;  /* Card description */
-        CONST unsigned int      podaddr;     /* Base Linux address for card */
-        CONST loader_t          loader;      /* loader program */
-        u64                     dma_mask;
-};
-
-struct in_chunk_dir {
-        unsigned int start_offset;
-        union {
-                unsigned char string[256];
-                unsigned char data[1];
-        } d;
-};
-
-/*
- * ecard_claim: claim an expansion card entry
- * FIXME - are these atomic / called with interrupts off ?
- */
-#define ecard_claim(ec) ((ec)->claimed = 1)
-
-/*
- * ecard_release: release an expansion card entry
- */
-#define ecard_release(ec) ((ec)->claimed = 0)
-
-/*
- * Read a chunk from an expansion card
- * cd : where to put read data
- * ec : expansion card info struct
- * id : id number to find
- * num: (n+1)'th id to find.
- */
-extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
-
-/*
- * Obtain the address of a card
- */
-extern unsigned int ecard_address (struct expansion_card *ec, card_type_t card_type, card_speed_t speed);
-
-#ifdef ECARD_C
-/* Definitions internal to ecard.c - for it's use only!!
- *
- * External expansion card header as read from the card
- */
-struct ex_ecid {
-        unsigned char   r_irq:1;
-        unsigned char   r_zero:1;
-        unsigned char   r_fiq:1;
-        unsigned char   r_id:4;
-        unsigned char   r_a:1;
-
-        unsigned char   r_cd:1;
-        unsigned char   r_is:1;
-        unsigned char   r_w:2;
-        unsigned char   r_r1:4;
-
-        unsigned char   r_r2:8;
-
-        unsigned char   r_prod[2];
-
-        unsigned char   r_manu[2];
-
-        unsigned char   r_country;
-
-        unsigned char   r_irqmask;
-        unsigned char   r_irqoff[3];
-
-        unsigned char   r_fiqmask;
-        unsigned char   r_fiqoff[3];
-};
-
-/*
- * Chunk directory entry as read from the card
- */
-struct ex_chunk_dir {
-        unsigned char r_id;
-        unsigned char r_len[3];
-        unsigned long r_start;
-        union {
-                char string[256];
-                char data[1];
-        } d;
-#define c_id(x)         ((x)->r_id)
-#define c_len(x)        ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
-#define c_start(x)      ((x)->r_start)
-};
-
-#endif
-
-extern struct bus_type ecard_bus_type;
-
-#define ECARD_DEV(_d)   container_of((_d), struct expansion_card, dev)
-
-struct ecard_driver {
-        int                     (*probe)(struct expansion_card *, const struct ecard_id *id);
-        void                    (*remove)(struct expansion_card *);
-        void                    (*shutdown)(struct expansion_card *);
-        const struct ecard_id   *id_table;
-        unsigned int            id;
-        struct device_driver    drv;
-};
-
-#define ECARD_DRV(_d)   container_of((_d), struct ecard_driver, drv)
-
-#define ecard_set_drvdata(ec,data)      dev_set_drvdata(&(ec)->dev, (data))
-#define ecard_get_drvdata(ec)           dev_get_drvdata(&(ec)->dev)
-
-int ecard_register_driver(struct ecard_driver *);
-void ecard_remove_driver(struct ecard_driver *);
-
-#endif
diff --git a/include/asm-arm26/elf.h b/include/asm-arm26/elf.h
deleted file mode 100644
index 5a47fdb3015d..000000000000
--- a/include/asm-arm26/elf.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef __ASMARM_ELF_H
-#define __ASMARM_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/procinfo.h>
-
-//FIXME - is it always 32K ?
-
-#define ELF_EXEC_PAGESIZE       32768
-#define SET_PERSONALITY(ex,ibcs2) set_personality(PER_LINUX)
-
-typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct { void *null; } elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- * We can only execute 26-bit code.
- */
-
-#define EM_ARM  40
-#define EF_ARM_APCS26 0x08
-
-//#define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && ((x)->e_flags & EF_ARM_APCS26) )      FIXME!!!!! - this looks OK, but the flags seem to be wrong.
-#define elf_check_arch(x) (1)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS       ELFCLASS32
-#define ELF_DATA        ELFDATA2LSB
-#define ELF_ARCH        EM_ARM
-
-#define USE_ELF_CORE_DUMP
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-/* When the program starts, a1 contains a pointer to a function to be 
-   registered with atexit, as per the SVR4 ABI.  A value of 0 means we 
-   have no such handler.  */
-#define ELF_PLAT_INIT(_r, load_addr)    (_r)->ARM_r0 = 0
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports. */
-
-extern unsigned int elf_hwcap;
-#define ELF_HWCAP       (elf_hwcap)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo. */
-
-/* For now we just provide a fairly general string that describes the
-   processor family.  This could be made more specific later if someone
-   implemented optimisations that require it.  26-bit CPUs give you
-   "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
-   supported).
- */
-
-#define ELF_PLATFORM_SIZE 8
-extern char elf_platform[];
-#define ELF_PLATFORM    (elf_platform)
-
-#endif
diff --git a/include/asm-arm26/emergency-restart.h b/include/asm-arm26/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-arm26/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-arm26/errno.h b/include/asm-arm26/errno.h
deleted file mode 100644
index 6e60f0612bb6..000000000000
--- a/include/asm-arm26/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ARM_ERRNO_H
-#define _ARM_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif
diff --git a/include/asm-arm26/fb.h b/include/asm-arm26/fb.h
deleted file mode 100644
index c7df38030992..000000000000
--- a/include/asm-arm26/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-        return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-arm26/fcntl.h b/include/asm-arm26/fcntl.h
deleted file mode 100644
index d85995e7459e..000000000000
--- a/include/asm-arm26/fcntl.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _ARM_FCNTL_H
-#define _ARM_FCNTL_H
-
-/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
-   located on an ext2 file system */
-#define O_DIRECTORY      040000 /* must be a directory */
-#define O_NOFOLLOW      0100000 /* don't follow links */
-#define O_DIRECT        0200000 /* direct disk access hint - currently ignored */
-#define O_LARGEFILE     0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif
diff --git a/include/asm-arm26/fiq.h b/include/asm-arm26/fiq.h
deleted file mode 100644
index a3bad09e825c..000000000000
--- a/include/asm-arm26/fiq.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/fiq.h
- *
- * Support for FIQ on ARM architectures.
- * Written by Philip Blundell <philb@gnu.org>, 1998
- * Re-written by Russell King
- */
-
-#ifndef __ASM_FIQ_H
-#define __ASM_FIQ_H
-
-#include <asm/ptrace.h>
-
-struct fiq_handler {
-        struct fiq_handler *next;
-        /* Name
-         */
-        const char *name;
-        /* Called to ask driver to relinquish/
-         * reacquire FIQ
-         * return zero to accept, or -<errno>
-         */
-        int (*fiq_op)(void *, int relinquish);
-        /* data for the relinquish/reacquire functions
-         */
-        void *dev_id;
-};
-
-extern int claim_fiq(struct fiq_handler *f);
-extern void release_fiq(struct fiq_handler *f);
-extern void set_fiq_handler(void *start, unsigned int length);
-extern void set_fiq_regs(struct pt_regs *regs);
-extern void get_fiq_regs(struct pt_regs *regs);
-extern void enable_fiq(int fiq);
-extern void disable_fiq(int fiq);
-
-#endif
diff --git a/include/asm-arm26/floppy.h b/include/asm-arm26/floppy.h
deleted file mode 100644
index efb732165a4f..000000000000
--- a/include/asm-arm26/floppy.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  linux/include/asm-arm/floppy.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
- */
-#ifndef __ASM_ARM_FLOPPY_H
-#define __ASM_ARM_FLOPPY_H
-
-#define fd_outb(val,port)                       \
-        do {                                    \
-                if ((port) == FD_DOR)           \
-                        fd_setdor((val));       \
-                else                            \
-                        outb((val),(port));     \
-        } while(0)
-
-#define fd_inb(port)            inb((port))
-#define fd_request_irq()        request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
-                                        IRQF_DISABLED,"floppy",NULL)
-#define fd_free_irq()           free_irq(IRQ_FLOPPYDISK,NULL)
-#define fd_disable_irq()        disable_irq(IRQ_FLOPPYDISK)
-#define fd_enable_irq()         enable_irq(IRQ_FLOPPYDISK)
-
-#define fd_request_dma()        request_dma(DMA_FLOPPY,"floppy")
-#define fd_free_dma()           free_dma(DMA_FLOPPY)
-#define fd_disable_dma()        disable_dma(DMA_FLOPPY)
-#define fd_enable_dma()         enable_dma(DMA_FLOPPY)
-#define fd_clear_dma_ff()       clear_dma_ff(DMA_FLOPPY)
-#define fd_set_dma_mode(mode)   set_dma_mode(DMA_FLOPPY, (mode))
-#define fd_set_dma_addr(addr)   set_dma_addr(DMA_FLOPPY, virt_to_bus((addr)))
-#define fd_set_dma_count(len)   set_dma_count(DMA_FLOPPY, (len))
-#define fd_cacheflush(addr,sz)
-
-/* need to clean up dma.h */
-#define DMA_FLOPPYDISK          DMA_FLOPPY
-
-/* Floppy_selects is the list of DOR's to select drive fd
- *
- * On initialisation, the floppy list is scanned, and the drives allocated
- * in the order that they are found.  This is done by seeking the drive
- * to a non-zero track, and then restoring it to track 0.  If an error occurs,
- * then there is no floppy drive present.       [to be put back in again]
- */
-static unsigned char floppy_selects[2][4] =
-{
-        { 0x10, 0x21, 0x23, 0x33 },
-        { 0x10, 0x21, 0x23, 0x33 }
-};
-
-#define fd_setdor(dor)                                                          \
-do {                                                                            \
-        int new_dor = (dor);                                                    \
-        if (new_dor & 0xf0)                                                     \
-                new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];  \
-        else                                                                    \
-                new_dor &= 0x0c;                                                \
-        outb(new_dor, FD_DOR);                                                  \
-} while (0)
-
-/*
- * Someday, we'll automatically detect which drives are present...
- */
-static inline void fd_scandrives (void)
-{
-#if 0
-        int floppy, drive_count;
-
-        fd_disable_irq();
-        raw_cmd = &default_raw_cmd;
-        raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
-        raw_cmd->track = 0;
-        raw_cmd->rate = ?;
-        drive_count = 0;
-        for (floppy = 0; floppy < 4; floppy ++) {
-                current_drive = drive_count;
-                /*
-                 * Turn on floppy motor
-                 */
-                if (start_motor(redo_fd_request))
-                        continue;
-                /*
-                 * Set up FDC
-                 */
-                fdc_specify();
-                /*
-                 * Tell FDC to recalibrate
-                 */
-                output_byte(FD_RECALIBRATE);
-                LAST_OUT(UNIT(floppy));
-                /* wait for command to complete */
-                if (!successful) {
-                        int i;
-                        for (i = drive_count; i < 3; i--)
-                                floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
-                        floppy_selects[fdc][3] = 0;
-                        floppy -= 1;
-                } else
-                        drive_count++;
-        }
-#else
-        floppy_selects[0][0] = 0x10;
-        floppy_selects[0][1] = 0x21;
-        floppy_selects[0][2] = 0x23;
-        floppy_selects[0][3] = 0x33;
-#endif
-}
-
-#define FDC1 (0x3f0)
-
-#define FLOPPY0_TYPE 4
-#define FLOPPY1_TYPE 4
-
-#define N_FDC 1
-#define N_DRIVE 4
-
-#define FLOPPY_MOTOR_MASK 0xf0
-
-#define CROSS_64KB(a,s) (0)
-
-/*
- * This allows people to reverse the order of
- * fd0 and fd1, in case their hardware is
- * strangely connected (as some RiscPCs
- * and A5000s seem to be).
- */
-static void driveswap(int *ints, int dummy, int dummy2)
-{
-        floppy_selects[0][0] ^= floppy_selects[0][1];
-        floppy_selects[0][1] ^= floppy_selects[0][0];
-        floppy_selects[0][0] ^= floppy_selects[0][1];
-}
-
-#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
-        
-#endif
diff --git a/include/asm-arm26/fpstate.h b/include/asm-arm26/fpstate.h
deleted file mode 100644
index 785749b3c5ab..000000000000
--- a/include/asm-arm26/fpstate.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  linux/include/asm-arm/fpstate.h
- *
- *  Copyright (C) 1995 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_FPSTATE_H
-#define __ASM_ARM_FPSTATE_H
-
-#define FP_SIZE 35
-
-struct fp_hard_struct {
-        unsigned int save[FP_SIZE];             /* as yet undefined */
-};
-
-struct fp_soft_struct {
-        unsigned int save[FP_SIZE];             /* undefined information */
-};
-
-union fp_state {
-        struct fp_hard_struct   hard;
-        struct fp_soft_struct   soft;
-};
-
-#endif
diff --git a/include/asm-arm26/futex.h b/include/asm-arm26/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/include/asm-arm26/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-arm26/hardirq.h b/include/asm-arm26/hardirq.h
deleted file mode 100644
index e717742ffce0..000000000000
--- a/include/asm-arm26/hardirq.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
-
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <asm/irq.h>
-
-typedef struct {
-        unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS    8
-
-/*
- * The hardirq mask has to be large enough to have space
- * for potentially all IRQ sources in the system nesting
- * on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-#ifndef CONFIG_SMP
-
-extern asmlinkage void __do_softirq(void);
-
-#endif
-
-
-#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-arm26/hardware.h b/include/asm-arm26/hardware.h
deleted file mode 100644
index 801df0bde8b7..000000000000
--- a/include/asm-arm26/hardware.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-arc/hardware.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the
- *  Acorn Archimedes/A5000 machines.
- *
- *  Modifications:
- *   04-04-1998 PJB/RMK Merged arc and a5k versions
- */
-#ifndef __ASM_HARDWARE_H
-#define __ASM_HARDWARE_H
-
-
-
-/*
- * What hardware must be present - these can be tested by the kernel
- * source.
- */
-#define HAS_IOC
-#define HAS_MEMC
-#define HAS_VIDC
-
-#define VDMA_ALIGNMENT  PAGE_SIZE
-#define VDMA_XFERSIZE   16
-#define VDMA_INIT       0
-#define VDMA_START      1
-#define VDMA_END        2
-
-#ifndef __ASSEMBLY__
-extern void memc_write(unsigned int reg, unsigned long val);
-
-#define video_set_dma(start,end,offset)                         \
-do {                                                            \
-        memc_write (VDMA_START, (start >> 2));                  \
-        memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2);      \
-        memc_write (VDMA_INIT, (offset >> 2));                  \
-} while (0)
-#endif
-
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define IO_START                0x03000000
-#define IO_SIZE                 0x01000000
-#define IO_BASE                 0x03000000
-
-/*
- * Screen mapping information
- */
-#define SCREEN_START            0x02000000
-#define SCREEN_END              0x02078000
-#define SCREEN_SIZE             0x00078000
-#define SCREEN_BASE             0x02000000
-
-
-#define EXPMASK_BASE            0x03360000
-#define IOEB_BASE               0x03350000
-#define VIDC_BASE               0x03400000
-#define LATCHA_BASE             0x03250040
-#define LATCHB_BASE             0x03250018
-#define IOC_BASE                0x03200000
-#define FLOPPYDMA_BASE          0x0302a000
-#define PCIO_BASE               0x03010000
-
-// FIXME - are the below correct?
-#define PODSLOT_IOC0_BASE       0x03240000
-#define PODSLOT_IOC_SIZE        (1 << 14)
-#define PODSLOT_MEMC_BASE       0x03000000
-#define PODSLOT_MEMC_SIZE       (1 << 14)
-
-#define vidc_writel(val)        __raw_writel(val, VIDC_BASE)
-
-#ifndef __ASSEMBLY__
-
-/*
- * for use with inb/outb
- */
-#define IOEB_VID_CTL            (IOEB_BASE + 0x48)
-#define IOEB_PRESENT            (IOEB_BASE + 0x50)
-#define IOEB_PSCLR              (IOEB_BASE + 0x58)
-#define IOEB_MONTYPE            (IOEB_BASE + 0x70)
-
-//FIXME - These adresses are weird - ISTR some weirdo address shifting stuff was going on here...
-#define IO_EC_IOC_BASE          0x80090000
-#define IO_EC_MEMC_BASE         0x80000000
-
-#ifdef CONFIG_ARCH_ARC
-/* A680 hardware */
-#define WD1973_BASE             0x03290000
-#define WD1973_LATCH            0x03350000
-#define Z8530_BASE              0x032b0008
-#define SCSI_BASE               0x03100000
-#endif
-
-#endif
-
-#define EXPMASK_STATUS          (EXPMASK_BASE + 0x00)
-#define EXPMASK_ENABLE          (EXPMASK_BASE + 0x04)
-
-#endif
diff --git a/include/asm-arm26/ide.h b/include/asm-arm26/ide.h
deleted file mode 100644
index db804d751df9..000000000000
--- a/include/asm-arm26/ide.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  linux/include/asm-arm/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the i386 architecture specific IDE code.
- */
-
-#ifndef __ASMARM_IDE_H
-#define __ASMARM_IDE_H
-
-#ifdef __KERNEL__
-
-#ifndef MAX_HWIFS
-#define MAX_HWIFS       4
-#endif
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-/* JMA 18.05.03 these will never be needed, but the kernel needs them to compile */
-#define __ide_mm_insw(port,addr,len)    readsw(port,addr,len)
-#define __ide_mm_insl(port,addr,len)    readsl(port,addr,len)
-#define __ide_mm_outsw(port,addr,len)   writesw(port,addr,len)
-#define __ide_mm_outsl(port,addr,len)   writesl(port,addr,len)
-
-#define IDE_ARCH_OBSOLETE_INIT
-#define ide_default_io_ctl(base)        (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMARM_IDE_H */
diff --git a/include/asm-arm26/io.h b/include/asm-arm26/io.h
deleted file mode 100644
index a5a7a4d5e09c..000000000000
--- a/include/asm-arm26/io.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- *  linux/include/asm-arm/io.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  16-Sep-1996 RMK     Inlined the inx/outx functions & optimised for both
- *                      constant addresses and variable addresses.
- *  04-Dec-1997 RMK     Moved a lot of this stuff to the new architecture
- *                      specific IO header files.
- *  27-Mar-1999 PJB     Second parameter of memcpy_toio is const..
- *  04-Apr-1999 PJB     Added check_signature.
- *  12-Dec-1999 RMK     More cleanups
- *  18-Jun-2000 RMK     Removed virt_to_* and friends definitions
- */
-#ifndef __ASM_ARM_IO_H
-#define __ASM_ARM_IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-
-/*
- * Generic IO read/write.  These perform native-endian accesses.  Note
- * that some architectures will want to re-define __raw_{read,write}w.
- */
-extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
-extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
-extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
-
-extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
-extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
-extern void __raw_readsl(unsigned int addr, void *data, int longlen);
-
-#define __raw_writeb(v,a)       (*(volatile unsigned char  *)(a) = (v))
-#define __raw_writew(v,a)       (*(volatile unsigned short *)(a) = (v))
-#define __raw_writel(v,a)       (*(volatile unsigned int   *)(a) = (v))
-
-#define __raw_readb(a)          (*(volatile unsigned char  *)(a))
-#define __raw_readw(a)          (*(volatile unsigned short *)(a))
-#define __raw_readl(a)          (*(volatile unsigned int   *)(a))
-
-
-/*
- * Bad read/write accesses...
- */
-extern void __readwrite_bug(const char *fn);
-
-/*
- * Now, pick up the machine-defined IO definitions
- */
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)                   \
- ({                                             \
-        unsigned int v, r = (b);                \
-        __asm__ __volatile__(                   \
-                "ldrb   %0, [%1, %2]"           \
-                : "=r" (v)                      \
-                : "r" (r), "Ir" (o));           \
-        v;                                      \
- })
-
-#define __arch_base_getl(b,o)                   \
- ({                                             \
-        unsigned int v, r = (b);                \
-        __asm__ __volatile__(                   \
-                "ldr    %0, [%1, %2]"           \
-                : "=r" (v)                      \
-                : "r" (r), "Ir" (o));           \
-        v;                                      \
- })
-
-#define __arch_base_putb(v,b,o)                 \
- ({                                             \
-        unsigned int r = (b);                   \
-        __asm__ __volatile__(                   \
-                "strb   %0, [%1, %2]"           \
-                :                               \
-                : "r" (v), "r" (r), "Ir" (o));  \
- })
-
-#define __arch_base_putl(v,b,o)                 \
- ({                                             \
-        unsigned int r = (b);                   \
-        __asm__ __volatile__(                   \
-                "str    %0, [%1, %2]"           \
-                :                               \
-                : "r" (v), "r" (r), "Ir" (o));  \
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.  Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x)  (!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
-        unsigned long temp;
-        __asm__ __volatile__(
-        "tst    %2, #0x80000000\n\t"
-        "mov    %0, %4\n\t"
-        "addeq  %0, %0, %3\n\t"
-        "strb   %1, [%0, %2, lsl #2]    @ outb"
-        : "=&r" (temp)
-        : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-        : "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
-        unsigned long temp;
-        __asm__ __volatile__(
-        "tst    %2, #0x80000000\n\t"
-        "mov    %0, %4\n\t"
-        "addeq  %0, %0, %3\n\t"
-        "str    %1, [%0, %2, lsl #2]    @ outw"
-        : "=&r" (temp)
-        : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-        : "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
-        unsigned long temp;
-        __asm__ __volatile__(
-        "tst    %2, #0x80000000\n\t"
-        "mov    %0, %4\n\t"
-        "addeq  %0, %0, %3\n\t"
-        "str    %1, [%0, %2, lsl #2]    @ outl"
-        : "=&r" (temp)
-        : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-        : "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)                                       \
-static inline unsigned sz __in##fnsuffix (unsigned int port)            \
-{                                                                               \
-        unsigned long temp, value;                                              \
-        __asm__ __volatile__(                                                   \
-        "tst    %2, #0x80000000\n\t"                                            \
-        "mov    %0, %4\n\t"                                                     \
-        "addeq  %0, %0, %3\n\t"                                                 \
-        "ldr" instr "   %1, [%0, %2, lsl #2]    @ in" #fnsuffix                 \
-        : "=&r" (temp), "=r" (value)                                            \
-        : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)                \
-        : "cc");                                                                \
-        return (unsigned sz)value;                                              \
-}
-
-static inline unsigned int __ioaddr (unsigned int port)                 \
-{                                                                               \
-        if (__PORT_PCIO(port))                                                  \
-                return (unsigned int)(PCIO_BASE + (port << 2));                 \
-        else                                                                    \
-                return (unsigned int)(IO_BASE + (port << 2));                   \
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)   \
-        DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)                                                     \
-({                                                                              \
-        if (__PORT_PCIO((port)))                                                \
-                __asm__ __volatile__(                                           \
-                "strb   %0, [%1, %2]    @ outbc"                                \
-                : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));          \
-        else                                                                    \
-                __asm__ __volatile__(                                           \
-                "strb   %0, [%1, %2]    @ outbc"                                \
-                : : "r" (value), "r" (IO_BASE), "r" ((port) << 2));             \
-})
-
-#define __inbc(port)                                                            \
-({                                                                              \
-        unsigned char result;                                                   \
-        if (__PORT_PCIO((port)))                                                \
-                __asm__ __volatile__(                                           \
-                "ldrb   %0, [%1, %2]    @ inbc"                                 \
-                : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));         \
-        else                                                                    \
-                __asm__ __volatile__(                                           \
-                "ldrb   %0, [%1, %2]    @ inbc"                                 \
-                : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));            \
-        result;                                                                 \
-})
-
-#define __outwc(value,port)                                                     \
-({                                                                              \
-        unsigned long v = value;                                                \
-        if (__PORT_PCIO((port)))                                                \
-                __asm__ __volatile__(                                           \
-                "str    %0, [%1, %2]    @ outwc"                                \
-                : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));        \
-        else                                                                    \
-                __asm__ __volatile__(                                           \
-                "str    %0, [%1, %2]    @ outwc"                                \
-                : : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));           \
-})
-
-#define __inwc(port)                                                            \
-({                                                                              \
-        unsigned short result;                                                  \
-        if (__PORT_PCIO((port)))                                                \
-                __asm__ __volatile__(                                           \
-                "ldr    %0, [%1, %2]    @ inwc"                                 \
-                : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));         \
-        else                                                                    \
-                __asm__ __volatile__(                                           \
-                "ldr    %0, [%1, %2]    @ inwc"                                 \
-                : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));            \
-        result & 0xffff;                                                        \
-})
-
-#define __outlc(value,port)                                                     \
-({                                                                              \
-        unsigned long v = value;                                                \
-        if (__PORT_PCIO((port)))                                                \
-                __asm__ __volatile__(                                           \
-                "str    %0, [%1, %2]    @ outlc"                                \
-                : : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));              \
-        else                                                                    \
-                __asm__ __volatile__(                                           \
-                "str    %0, [%1, %2]    @ outlc"                                \
-                : : "r" (v), "r" (IO_BASE), "r" ((port) << 2));                 \
-})
-
-#define __inlc(port)                                                            \
-({                                                                              \
-        unsigned long result;                                                   \
-        if (__PORT_PCIO((port)))                                                \
-                __asm__ __volatile__(                                           \
-                "ldr    %0, [%1, %2]    @ inlc"                                 \
-                : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));         \
-        else                                                                    \
-                __asm__ __volatile__(                                           \
-                "ldr    %0, [%1, %2]    @ inlc"                                 \
-                : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));            \
-        result;                                                                 \
-})
-
-#define __ioaddrc(port)                                                         \
-({                                                                              \
-        unsigned long addr;                                                     \
-        if (__PORT_PCIO((port)))                                                \
-                addr = PCIO_BASE + ((port) << 2);                               \
-        else                                                                    \
-                addr = IO_BASE + ((port) << 2);                                 \
-        addr;                                                                   \
-})
-
-#define inb(p)          (__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
-#define inw(p)          (__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
-#define inl(p)          (__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
-#define outb(v,p)       (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)       (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)       (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)     (__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-
-/* JMA 18.02.03 added sb,sl from arm/io.h, changing io to ioaddr */
-
-#define outsb(p,d,l)            __raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)            __raw_writesw(__ioaddr(p),d,l)
-#define outsl(p,d,l)            __raw_writesl(__ioaddr(p),d,l)
-
-#define insb(p,d,l)             __raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)             __raw_readsw(__ioaddr(p),d,l)
-#define insl(p,d,l)             __raw_readsl(__ioaddr(p),d,l)
-
-#define insw(p,d,l)     __raw_readsw(__ioaddr(p),d,l)
-#define outsw(p,d,l)    __raw_writesw(__ioaddr(p),d,l)
-
-#define readb(c)                        (__readwrite_bug("readb"),0)
-#define readw(c)                        (__readwrite_bug("readw"),0)
-#define readl(c)                        (__readwrite_bug("readl"),0)
-#define readb_relaxed(addr)             readb(addr)
-#define readw_relaxed(addr)             readw(addr)
-#define readl_relaxed(addr)             readl(addr)
-#define writeb(v,c)                     __readwrite_bug("writeb")
-#define writew(v,c)                     __readwrite_bug("writew")
-#define writel(v,c)                     __readwrite_bug("writel")
-
-#define readsw(p,d,l)                 (__readwrite_bug("readsw"),0)
-#define readsl(p,d,l)                 (__readwrite_bug("readsl"),0)
-#define writesw(p,d,l)                        __readwrite_bug("writesw")
-#define writesl(p,d,l)                        __readwrite_bug("writesl")
-
-#define mmiowb()
-
-/* the following macro is deprecated */
-#define ioaddr(port)                    __ioaddr((port))
-
-/*
- * No ioremap support here.
- */
-#define __arch_ioremap(c,s,f,a)   ((void *)(c))
-#define __arch_iounmap(c)       do { }  while (0)
-
-
-#if defined(__arch_putb) || defined(__arch_putw) || defined(__arch_putl) || \
-    defined(__arch_getb) || defined(__arch_getw) || defined(__arch_getl)
-#warning machine class uses old __arch_putw or __arch_getw
-#endif
-
-/*
- *  IO port access primitives
- *  -------------------------
- *
- * The ARM doesn't have special IO access instructions; all IO is memory
- * mapped.  Note that these are defined to perform little endian accesses
- * only.  Their primary purpose is to access PCI and ISA peripherals.
- *
- * Note that for a big endian machine, this implies that the following
- * big endian mode connectivity is in place, as described by numerious
- * ARM documents:
- *
- *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
- *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
- *
- * The machine specific io.h include defines __io to translate an "IO"
- * address to a memory address.
- *
- * Note that we prevent GCC re-ordering or caching values in expressions
- * by introducing sequence points into the in*() definitions.  Note that
- * __raw_* do not guarantee this behaviour.
- */
-/*
-#define outsb(p,d,l)            __raw_writesb(__io(p),d,l)
-#define outsw(p,d,l)            __raw_writesw(__io(p),d,l)
-
-#define insb(p,d,l)             __raw_readsb(__io(p),d,l)
-#define insw(p,d,l)             __raw_readsw(__io(p),d,l)
-*/
-#define outb_p(val,port)        outb((val),(port))
-#define outw_p(val,port)        outw((val),(port))
-#define inb_p(port)             inb((port))
-#define inw_p(port)             inw((port))
-#define inl_p(port)             inl((port))
-
-#define outsb_p(port,from,len)  outsb(port,from,len)
-#define outsw_p(port,from,len)  outsw(port,from,len)
-#define insb_p(port,to,len)     insb(port,to,len)
-#define insw_p(port,to,len)     insw(port,to,len)
-
-/*
- * String version of IO memory access ops:
- */
-extern void _memcpy_fromio(void *, unsigned long, size_t);
-extern void _memcpy_toio(unsigned long, const void *, size_t);
-extern void _memset_io(unsigned long, int, size_t);
-
-/*
- * ioremap and friends.
- *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/IO-mapping.txt.
- */
-extern void * __ioremap(unsigned long, size_t, unsigned long, unsigned long);
-extern void __iounmap(void *addr);
-
-#ifndef __arch_ioremap
-#define ioremap(cookie,size)            __ioremap(cookie,size,0,1)
-#define ioremap_nocache(cookie,size)    __ioremap(cookie,size,0,1)
-#define iounmap(cookie)                 __iounmap(cookie)
-#else
-#define ioremap(cookie,size)            __arch_ioremap((cookie),(size),0,1)
-#define ioremap_nocache(cookie,size)    __arch_ioremap((cookie),(size),0,1)
-#define iounmap(cookie)                 __arch_iounmap(cookie)
-#endif
-
-/*
- * DMA-consistent mapping functions.  These allocate/free a region of
- * uncached, unwrite-buffered mapped memory space for use with DMA
- * devices.  This is the "generic" version.  The PCI specific version
- * is in pci.h
- */
-extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
-extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
-extern void consistent_sync(void *vaddr, size_t size, int rw);
-
-/*
- * can the hardware map this into one segment or not, given no other
- * constraints.
- */
-#define BIOVEC_MERGEABLE(vec1, vec2)    \
-        ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)    __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)   p
-
-#endif  /* __KERNEL__ */
-#endif  /* __ASM_ARM_IO_H */
diff --git a/include/asm-arm26/ioc.h b/include/asm-arm26/ioc.h
deleted file mode 100644
index b3b46ef65943..000000000000
--- a/include/asm-arm26/ioc.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/ioc.h
- *
- *  Copyright (C) Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Use these macros to read/write the IOC.  All it does is perform the actual
- *  read/write.
- */
-#ifndef __ASMARM_HARDWARE_IOC_H
-#define __ASMARM_HARDWARE_IOC_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * We use __raw_base variants here so that we give the compiler the
- * chance to keep IOC_BASE in a register.
- */
-#define ioc_readb(off)          __raw_readb(IOC_BASE + (off))
-#define ioc_writeb(val,off)     __raw_writeb(val, IOC_BASE + (off))
-
-#endif
-
-#define IOC_CONTROL     (0x00)
-#define IOC_KARTTX      (0x04)
-#define IOC_KARTRX      (0x04)
-
-#define IOC_IRQSTATA    (0x10)
-#define IOC_IRQREQA     (0x14)
-#define IOC_IRQCLRA     (0x14)
-#define IOC_IRQMASKA    (0x18)
-
-#define IOC_IRQSTATB    (0x20)
-#define IOC_IRQREQB     (0x24)
-#define IOC_IRQMASKB    (0x28)
-
-#define IOC_FIQSTAT     (0x30)
-#define IOC_FIQREQ      (0x34)
-#define IOC_FIQMASK     (0x38)
-
-#define IOC_T0CNTL      (0x40)
-#define IOC_T0LTCHL     (0x40)
-#define IOC_T0CNTH      (0x44)
-#define IOC_T0LTCHH     (0x44)
-#define IOC_T0GO        (0x48)
-#define IOC_T0LATCH     (0x4c)
-
-#define IOC_T1CNTL      (0x50)
-#define IOC_T1LTCHL     (0x50)
-#define IOC_T1CNTH      (0x54)
-#define IOC_T1LTCHH     (0x54)
-#define IOC_T1GO        (0x58)
-#define IOC_T1LATCH     (0x5c)
-
-#define IOC_T2CNTL      (0x60)
-#define IOC_T2LTCHL     (0x60)
-#define IOC_T2CNTH      (0x64)
-#define IOC_T2LTCHH     (0x64)
-#define IOC_T2GO        (0x68)
-#define IOC_T2LATCH     (0x6c)
-
-#define IOC_T3CNTL      (0x70)
-#define IOC_T3LTCHL     (0x70)
-#define IOC_T3CNTH      (0x74)
-#define IOC_T3LTCHH     (0x74)
-#define IOC_T3GO        (0x78)
-#define IOC_T3LATCH     (0x7c)
-
-#endif
diff --git a/include/asm-arm26/ioctl.h b/include/asm-arm26/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/include/asm-arm26/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-arm26/ioctls.h b/include/asm-arm26/ioctls.h
deleted file mode 100644
index 8a3296200be1..000000000000
--- a/include/asm-arm26/ioctls.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef __ASM_ARM_IOCTLS_H
-#define __ASM_ARM_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS          0x5401
-#define TCSETS          0x5402
-#define TCSETSW         0x5403
-#define TCSETSF         0x5404
-#define TCGETA          0x5405
-#define TCSETA          0x5406
-#define TCSETAW         0x5407
-#define TCSETAF         0x5408
-#define TCSBRK          0x5409
-#define TCXONC          0x540A
-#define TCFLSH          0x540B
-#define TIOCEXCL        0x540C
-#define TIOCNXCL        0x540D
-#define TIOCSCTTY       0x540E
-#define TIOCGPGRP       0x540F
-#define TIOCSPGRP       0x5410
-#define TIOCOUTQ        0x5411
-#define TIOCSTI         0x5412
-#define TIOCGWINSZ      0x5413
-#define TIOCSWINSZ      0x5414
-#define TIOCMGET        0x5415
-#define TIOCMBIS        0x5416
-#define TIOCMBIC        0x5417
-#define TIOCMSET        0x5418
-#define TIOCGSOFTCAR    0x5419
-#define TIOCSSOFTCAR    0x541A
-#define FIONREAD        0x541B
-#define TIOCINQ         FIONREAD
-#define TIOCLINUX       0x541C
-#define TIOCCONS        0x541D
-#define TIOCGSERIAL     0x541E
-#define TIOCSSERIAL     0x541F
-#define TIOCPKT         0x5420
-#define FIONBIO         0x5421
-#define TIOCNOTTY       0x5422
-#define TIOCSETD        0x5423
-#define TIOCGETD        0x5424
-#define TCSBRKP         0x5425  /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT  0x5426  /* For debugging only */
-#define TIOCSBRK        0x5427  /* BSD compatibility */
-#define TIOCCBRK        0x5428  /* BSD compatibility */
-#define TIOCGSID        0x5429  /* Return the session ID of FD */
-#define TCGETS2         _IOR('T',0x2A, struct termios2)
-#define TCSETS2         _IOW('T',0x2B, struct termios2)
-#define TCSETSW2        _IOW('T',0x2C, struct termios2)
-#define TCSETSF2        _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN        _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK      _IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define FIONCLEX        0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX         0x5451
-#define FIOASYNC        0x5452
-#define TIOCSERCONFIG   0x5453
-#define TIOCSERGWILD    0x5454
-#define TIOCSERSWILD    0x5455
-#define TIOCGLCKTRMIOS  0x5456
-#define TIOCSLCKTRMIOS  0x5457
-#define TIOCSERGSTRUCT  0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT      0x545C  /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT     0x545D  /* read serial port inline interrupt counts */
-#define FIOQSIZE        0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA             0
-#define TIOCPKT_FLUSHREAD        1
-#define TIOCPKT_FLUSHWRITE       2
-#define TIOCPKT_STOP             4
-#define TIOCPKT_START            8
-#define TIOCPKT_NOSTOP          16
-#define TIOCPKT_DOSTOP          32
-
-#define TIOCSER_TEMT    0x01    /* Transmitter physically empty */
-
-#endif
diff --git a/include/asm-arm26/ipc.h b/include/asm-arm26/ipc.h
deleted file mode 100644
index a46e3d9c2a3f..000000000000
--- a/include/asm-arm26/ipc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipc.h>
diff --git a/include/asm-arm26/ipcbuf.h b/include/asm-arm26/ipcbuf.h
deleted file mode 100644
index 97683975f7df..000000000000
--- a/include/asm-arm26/ipcbuf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASMARM_IPCBUF_H
-#define __ASMARM_IPCBUF_H
-
-/*
- * The ipc64_perm structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-        __kernel_key_t          key;
-        __kernel_uid32_t        uid;
-        __kernel_gid32_t        gid;
-        __kernel_uid32_t        cuid;
-        __kernel_gid32_t        cgid;
-        __kernel_mode_t         mode;
-        unsigned short          __pad1;
-        unsigned short          seq;
-        unsigned short          __pad2;
-        unsigned long           __unused1;
-        unsigned long           __unused2;
-};
-
-#endif /* __ASMARM_IPCBUF_H */
diff --git a/include/asm-arm26/irq.h b/include/asm-arm26/irq.h
deleted file mode 100644
index 52971b49ed3b..000000000000
--- a/include/asm-arm26/irq.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef __ASM_ARM_IRQ_H
-#define __ASM_ARM_IRQ_H
-
-#include <asm/sysirq.h>
-
-#ifndef NR_IRQS
-#define NR_IRQS 128
-#endif
-
-
-/* JMA 18.05.02 Copied off arch/arm/irq.h */
-#ifndef irq_canonicalize
-#define irq_canonicalize(i)     (i)
-#endif
-
-
-/*
- * Use this value to indicate lack of interrupt
- * capability
- */
-#ifndef NO_IRQ
-#define NO_IRQ  ((unsigned int)(-1))
-#endif
-
-struct irqaction;
-
-#define __IRQT_FALEDGE  (1 << 0)
-#define __IRQT_RISEDGE  (1 << 1)
-#define __IRQT_LOWLVL   (1 << 2)
-#define __IRQT_HIGHLVL  (1 << 3)
-
-#define IRQT_NOEDGE     (0)
-#define IRQT_RISING     (__IRQT_RISEDGE)
-#define IRQT_FALLING    (__IRQT_FALEDGE)
-#define IRQT_BOTHEDGE   (__IRQT_RISEDGE|__IRQT_FALEDGE)
-#define IRQT_LOW        (__IRQT_LOWLVL)
-#define IRQT_HIGH       (__IRQT_HIGHLVL)
-#define IRQT_PROBE      (1 << 4)
-
-int set_irq_type(unsigned int irq, unsigned int type);
-
-#endif
-
diff --git a/include/asm-arm26/irqchip.h b/include/asm-arm26/irqchip.h
deleted file mode 100644
index 6a007a954098..000000000000
--- a/include/asm-arm26/irqchip.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/irq.h
- *
- *  Copyright (C) 1995-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_IRQ_H
-#define __ASM_ARM_MACH_IRQ_H
-
-struct irqdesc;
-struct pt_regs;
-struct seq_file;
-
-typedef void (*irq_handler_t)(unsigned int, struct irqdesc *, struct pt_regs *);
-typedef void (*irq_control_t)(unsigned int);
-
-struct irqchip {
-        /*
-         * Acknowledge the IRQ.
-         * If this is a level-based IRQ, then it is expected to mask the IRQ
-         * as well.
-         */
-        void (*ack)(unsigned int);
-        /*
-         * Mask the IRQ in hardware.
-         */
-        void (*mask)(unsigned int);
-        /*
-         * Unmask the IRQ in hardware.
-         */
-        void (*unmask)(unsigned int);
-        /*
-         * Re-run the IRQ
-         */
-        void (*rerun)(unsigned int);
-        /*
-         * Set the type of the IRQ.
-         */
-        int (*type)(unsigned int, unsigned int);
-};
-
-struct irqdesc {
-        irq_handler_t   handle;
-        struct irqchip  *chip;
-        struct irqaction *action;
-
-        unsigned int    enabled  : 1;           /* IRQ is currently enabled   */
-        unsigned int    triggered: 1;           /* IRQ has occurred           */
-        unsigned int    running  : 1;           /* IRQ is running             */
-        unsigned int    pending  : 1;           /* IRQ is pending             */
-        unsigned int    probing  : 1;           /* IRQ in use for a probe     */
-        unsigned int    probe_ok : 1;           /* IRQ can be used for probe  */
-        unsigned int    valid    : 1;           /* IRQ claimable              */
-        unsigned int    noautoenable : 1;       /* don't automatically enable IRQ */
-        unsigned int    unused   :23;
-        unsigned int    depth;                  /* disable depth              */
-
-        /*
-         * IRQ lock detection
-         */
-        unsigned int    lck_cnt;
-        unsigned int    lck_pc;
-        unsigned int    lck_jif;
-};
-
-extern struct irqdesc irq_desc[];
-
-/*
- * This is internal.  Do not use it.
- */
-extern void (*init_arch_irq)(void);
-extern void init_FIQ(void);
-extern int show_fiq_list(struct seq_file *, void *);
-void __set_irq_handler(unsigned int irq, irq_handler_t, int);
-
-/*
- * External stuff.
- */
-#define set_irq_handler(irq,handler)            __set_irq_handler(irq,handler,0)
-#define set_irq_chained_handler(irq,handler)    __set_irq_handler(irq,handler,1)
-
-void set_irq_chip(unsigned int irq, struct irqchip *);
-void set_irq_flags(unsigned int irq, unsigned int flags);
-
-#define IRQF_VALID      (1 << 0)
-#define IRQF_PROBE      (1 << 1)
-#define IRQF_NOAUTOEN   (1 << 2)
-
-/*
- * Built-in IRQ handlers.
- */
-void do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
-void do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
-void do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
-void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
-void dummy_mask_unmask_irq(unsigned int irq);
-
-#endif
diff --git a/include/asm-arm26/kdebug.h b/include/asm-arm26/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/include/asm-arm26/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-arm26/kmap_types.h b/include/asm-arm26/kmap_types.h
deleted file mode 100644
index d5da712b723c..000000000000
--- a/include/asm-arm26/kmap_types.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ARM_KMAP_TYPES_H
-#define __ARM_KMAP_TYPES_H
-
-/*
- * This is the "bare minimum".  AIO seems to require this.
- */
-enum km_type {
-        KM_IRQ0,
-        KM_USER1
-};
-
-#endif
diff --git a/include/asm-arm26/leds.h b/include/asm-arm26/leds.h
deleted file mode 100644
index 12290ea55801..000000000000
--- a/include/asm-arm26/leds.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/leds.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Event-driven interface for LEDs on machines
- *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
-        led_idle_start,
-        led_idle_end,
-        led_timer,
-        led_start,
-        led_stop,
-        led_claim,              /* override idle & timer leds */
-        led_release,            /* restore idle & timer leds */
-        led_start_timer_mode,
-        led_stop_timer_mode,
-        led_green_on,
-        led_green_off,
-        led_amber_on,
-        led_amber_off,
-        led_red_on,
-        led_red_off,
-        led_blue_on,
-        led_blue_off,
-        /*
-         * I want this between led_timer and led_start, but
-         * someone has decided to export this to user space
-         */
-        led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff --git a/include/asm-arm26/limits.h b/include/asm-arm26/limits.h
deleted file mode 100644
index 08d8c6600804..000000000000
--- a/include/asm-arm26/limits.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_PIPE_H
-#define __ASM_PIPE_H
-
-#ifndef PAGE_SIZE
-#include <asm/page.h>
-#endif
-
-#define PIPE_BUF        PAGE_SIZE
-
-#endif
-
diff --git a/include/asm-arm26/linkage.h b/include/asm-arm26/linkage.h
deleted file mode 100644
index dbe4b4e31a5b..000000000000
--- a/include/asm-arm26/linkage.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .align 0
-#define __ALIGN_STR ".align 0"
-
-#endif
diff --git a/include/asm-arm26/local.h b/include/asm-arm26/local.h
deleted file mode 100644
index 6759e9183cef..000000000000
--- a/include/asm-arm26/local.h
+++ /dev/null
@@ -1,2 +0,0 @@
-//FIXME - nicked from arm32 - check it is correct...
-#include <asm-generic/local.h>
diff --git a/include/asm-arm26/locks.h b/include/asm-arm26/locks.h
deleted file mode 100644
index 81b3bda2ed00..000000000000
--- a/include/asm-arm26/locks.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- *  linux/include/asm-arm/proc-armo/locks.h
- *
- *  Copyright (C) 2000 Russell King
- *  Fixes for 26 bit machines, (C) 2000 Dave Gilbert
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Interrupt safe locking assembler. 
- */
-#ifndef __ASM_PROC_LOCKS_H
-#define __ASM_PROC_LOCKS_H
-
-/* Decrements by 1, fails if value < 0 */
-#define __down_op(ptr,fail)                     \
-        ({                                      \
-        __asm__ __volatile__ (                  \
-        "@ atomic down operation\n"             \
-"       mov     ip, pc\n"                       \
-"       orr     lr, ip, #0x08000000\n"          \
-"       teqp    lr, #0\n"                       \
-"       ldr     lr, [%0]\n"                     \
-"       and     ip, ip, #0x0c000003\n"          \
-"       subs    lr, lr, #1\n"                   \
-"       str     lr, [%0]\n"                     \
-"       orrmi   ip, ip, #0x80000000     @ set N\n" \
-"       teqp    ip, #0\n"                       \
-"       movmi   ip, %0\n"                       \
-"       blmi    " #fail                         \
-        :                                       \
-        : "r" (ptr)                             \
-        : "ip", "lr", "cc");                    \
-        })
-
-#define __down_op_ret(ptr,fail)                 \
-        ({                                      \
-                unsigned int result;            \
-        __asm__ __volatile__ (                  \
-"       @ down_op_ret\n"                        \
-"       mov     ip, pc\n"                       \
-"       orr     lr, ip, #0x08000000\n"          \
-"       teqp    lr, #0\n"                       \
-"       ldr     lr, [%1]\n"                     \
-"       and     ip, ip, #0x0c000003\n"          \
-"       subs    lr, lr, #1\n"                   \
-"       str     lr, [%1]\n"                     \
-"       orrmi   ip, ip, #0x80000000     @ set N\n" \
-"       teqp    ip, #0\n"                       \
-"       movmi   ip, %1\n"                       \
-"       movpl   ip, #0\n"                       \
-"       blmi    " #fail "\n"                    \
-"       mov     %0, ip"                         \
-        : "=&r" (result)                        \
-        : "r" (ptr)                             \
-        : "ip", "lr", "cc");                    \
-        result;                                 \
-        })
-
-#define __up_op(ptr,wake)                       \
-        ({                                      \
-        __asm__ __volatile__ (                  \
-        "@ up_op\n"                             \
-"       mov     ip, pc\n"                       \
-"       orr     lr, ip, #0x08000000\n"          \
-"       teqp    lr, #0\n"                       \
-"       ldr     lr, [%0]\n"                     \
-"       and     ip, ip, #0x0c000003\n"          \
-"       adds    lr, lr, #1\n"                   \
-"       str     lr, [%0]\n"                     \
-"       orrle   ip, ip, #0x80000000     @ set N - should this be mi ??? DAG ! \n" \
-"       teqp    ip, #0\n"                       \
-"       movmi   ip, %0\n"                       \
-"       blmi    " #wake                         \
-        :                                       \
-        : "r" (ptr)                             \
-        : "ip", "lr", "cc");                    \
-        })
-
-/*
- * The value 0x01000000 supports up to 128 processors and
- * lots of processes.  BIAS must be chosen such that sub'ing
- * BIAS once per CPU will result in the long remaining
- * negative.
- */
-#define RW_LOCK_BIAS      0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
-
-/* Decrements by RW_LOCK_BIAS rather than 1, fails if value != 0 */
-#define __down_op_write(ptr,fail)               \
-        ({                                      \
-        __asm__ __volatile__(                   \
-        "@ down_op_write\n"                     \
-"       mov     ip, pc\n"                       \
-"       orr     lr, ip, #0x08000000\n"          \
-"       teqp    lr, #0\n"                       \
-"       and     ip, ip, #0x0c000003\n"          \
-\
-"       ldr     lr, [%0]\n"                     \
-"       subs    lr, lr, %1\n"                   \
-"       str     lr, [%0]\n"                     \
-\
-" orreq ip, ip, #0x40000000 @ set Z \n"\
-"       teqp    ip, #0\n"                       \
-"       movne   ip, %0\n"                       \
-"       blne    " #fail                         \
-        :                                       \
-        : "r" (ptr), "I" (RW_LOCK_BIAS)         \
-        : "ip", "lr", "cc");                    \
-        })
-
-/* Increments by RW_LOCK_BIAS, wakes if value >= 0 */
-#define __up_op_write(ptr,wake)                 \
-        ({                                      \
-        __asm__ __volatile__(                   \
-        "@ up_op_read\n"                        \
-"       mov     ip, pc\n"                       \
-"       orr     lr, ip, #0x08000000\n"          \
-"       teqp    lr, #0\n"                       \
-\
-"       ldr     lr, [%0]\n"                     \
-"       and     ip, ip, #0x0c000003\n"          \
-"       adds    lr, lr, %1\n"                   \
-"       str     lr, [%0]\n"                     \
-\
-" orrcs ip, ip, #0x20000000 @ set C\n" \
-"       teqp    ip, #0\n"                       \
-"       movcs   ip, %0\n"                       \
-"       blcs    " #wake                         \
-        :                                       \
-        : "r" (ptr), "I" (RW_LOCK_BIAS)         \
-        : "ip", "lr", "cc");                    \
-        })
-
-#define __down_op_read(ptr,fail)                \
-        __down_op(ptr, fail)
-
-#define __up_op_read(ptr,wake)                  \
-        ({                                      \
-        __asm__ __volatile__(                   \
-        "@ up_op_read\n"                        \
-"       mov     ip, pc\n"                       \
-"       orr     lr, ip, #0x08000000\n"          \
-"       teqp    lr, #0\n"                       \
-\
-"       ldr     lr, [%0]\n"                     \
-"       and     ip, ip, #0x0c000003\n"          \
-"       adds    lr, lr, %1\n"                   \
-"       str     lr, [%0]\n"                     \
-\
-" orreq ip, ip, #0x40000000 @ Set Z \n" \
-"       teqp    ip, #0\n"                       \
-"       moveq   ip, %0\n"                       \
-"       bleq    " #wake                         \
-        :                                       \
-        : "r" (ptr), "I" (1)                    \
-        : "ip", "lr", "cc");                    \
-        })
-
-#endif
diff --git a/include/asm-arm26/mach-types.h b/include/asm-arm26/mach-types.h
deleted file mode 100644
index 0aeaedcbac96..000000000000
--- a/include/asm-arm26/mach-types.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Unlike ARM32 this is NOT automatically generated. DONT delete it
- * Instead, consider FIXME-ing it so its auto-detected.
- */
-
-#ifndef __ASM_ARM_MACH_TYPE_H
-#define __ASM_ARM_MACH_TYPE_H
-
-
-#ifndef __ASSEMBLY__
-extern unsigned int __machine_arch_type;
-#endif
-
-#define MACH_TYPE_ARCHIMEDES           10
-#define MACH_TYPE_A5K                  11
-
-#ifdef CONFIG_ARCH_ARC
-# define machine_arch_type              MACH_TYPE_ARCHIMEDES
-# define machine_is_archimedes()        (machine_arch_type == MACH_TYPE_ARCHIMEDES)
-#else
-# define machine_is_archimedes()        (0)
-#endif
-
-#ifdef CONFIG_ARCH_A5K
-# define machine_arch_type              MACH_TYPE_A5K
-# define machine_is_a5k()               (machine_arch_type == MACH_TYPE_A5K)
-#else
-# define machine_is_a5k()       (0)
-#endif
-
-#ifndef machine_arch_type
-#error Unknown machine type
-#define machine_arch_type       __machine_arch_type
-#endif
-
-#endif
diff --git a/include/asm-arm26/map.h b/include/asm-arm26/map.h
deleted file mode 100644
index 6e12a7fa5c5d..000000000000
--- a/include/asm-arm26/map.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/map.h
- *
- *  Copyright (C) 1999-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Page table mapping constructs and function prototypes
- */
-struct map_desc {
-        unsigned long virtual;
-        unsigned long physical;
-        unsigned long length;
-        unsigned int type;
-};
-
-struct meminfo;
-
-extern void create_memmap_holes(struct meminfo *);
-extern void memtable_init(struct meminfo *);
-extern void iotable_init(struct map_desc *);
-extern void setup_io_desc(void);
diff --git a/include/asm-arm26/mc146818rtc.h b/include/asm-arm26/mc146818rtc.h
deleted file mode 100644
index a234130db8f1..000000000000
--- a/include/asm-arm26/mc146818rtc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x)     (0x70 + (x))
-#define RTC_ALWAYS_BCD  1       /* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-arm26/memory.h b/include/asm-arm26/memory.h
deleted file mode 100644
index 7c1e5be39060..000000000000
--- a/include/asm-arm26/memory.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- *  linux/include/asm-arm26/memory.h
- *
- *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Note: this file should not be included by non-asm/.h files
- */
-#ifndef __ASM_ARM_MEMORY_H
-#define __ASM_ARM_MEMORY_H
-
-/*
- * User space: 26MB
- */
-#define TASK_SIZE       (0x01a00000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
-
-/*
- * Page offset: 32MB
- */
-#define PAGE_OFFSET     (0x02000000UL)
-#define PHYS_OFFSET     (0x02000000UL)
-
-#define PHYS_TO_NID(addr)       (0)
-
-/*
- * PFNs are used to describe any physical page; this means
- * PFN 0 == physical address 0.
- *
- * This is the PFN of the first RAM page in the kernel
- * direct-mapped view.  We assume this is the first page
- * of RAM in the mem_map as well.
- */
-#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
-
-/*
- * These are *only* valid on the kernel direct mapped RAM memory.
- */
-static inline unsigned long virt_to_phys(void *x)
-{
-        return (unsigned long)x;
-}
-
-static inline void *phys_to_virt(unsigned long x)
-{
-        return (void *)((unsigned long)x);
-}
-
-#define __pa(x)                 (unsigned long)(x)
-#define __va(x)                 ((void *)(unsigned long)(x))
-
-/*
- * Virtual <-> DMA view memory address translations
- * Again, these are *only* valid on the kernel direct mapped RAM
- * memory.  Use of these is *deprecated*.
- */
-#define virt_to_bus(x)          ((unsigned long)(x))
-#define bus_to_virt(x)          ((void *)((unsigned long)(x)))
-
-/*
- * Conversion between a struct page and a physical address.
- *
- * Note: when converting an unknown physical address to a
- * struct page, the resulting pointer must be validated
- * using VALID_PAGE().  It must return an invalid struct page
- * for any physical address not corresponding to a system
- * RAM address.
- *
- *  page_to_pfn(page)   convert a struct page * to a PFN number
- *  pfn_to_page(pfn)    convert a _valid_ PFN number to struct page *
- *  pfn_valid(pfn)      indicates whether a PFN number is valid
- *
- *  virt_to_page(k)     convert a _valid_ virtual address to struct page *
- *  virt_addr_valid(k)  indicates whether a virtual address is valid
- */
-#define ARCH_PFN_OFFSET         (PHYS_PFN_OFFSET)
-#define pfn_valid(pfn)          ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-
-#define virt_to_page(kaddr)     (pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
-#define virt_addr_valid(kaddr)  ((int)(kaddr) >= PAGE_OFFSET && (int)(kaddr) < (unsigned long)high_memory)
-
-/*
- * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
-
-/*
- * We should really eliminate virt_to_bus() here - it's deprecated.
- */
-#define page_to_bus(page)       (page_address(page))
-
-#include <asm-generic/memory_model.h>
-#endif
diff --git a/include/asm-arm26/mman.h b/include/asm-arm26/mman.h
deleted file mode 100644
index 4000a6c1b76b..000000000000
--- a/include/asm-arm26/mman.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ARM_MMAN_H__
-#define __ARM_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN   0x0100          /* stack-like segment */
-#define MAP_DENYWRITE   0x0800          /* ETXTBSY */
-#define MAP_EXECUTABLE  0x1000          /* mark it as an executable */
-#define MAP_LOCKED      0x2000          /* pages are locked */
-#define MAP_NORESERVE   0x4000          /* don't check for reservations */
-#define MAP_POPULATE    0x8000          /* populate (prefault) page tables */
-#define MAP_NONBLOCK    0x10000         /* do not block on IO */
-
-#define MCL_CURRENT     1               /* lock all current mappings */
-#define MCL_FUTURE      2               /* lock all future mappings */
-
-#endif /* __ARM_MMAN_H__ */
diff --git a/include/asm-arm26/mmu.h b/include/asm-arm26/mmu.h
deleted file mode 100644
index 9b8d3d781a1e..000000000000
--- a/include/asm-arm26/mmu.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ARM_MMU_H
-#define __ARM_MMU_H
-
-/*
- * The ARM doesn't have a mmu context
- */
-typedef struct { } mm_context_t;
-
-#endif
diff --git a/include/asm-arm26/mmu_context.h b/include/asm-arm26/mmu_context.h
deleted file mode 100644
index 16c821f81b8d..000000000000
--- a/include/asm-arm26/mmu_context.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/include/asm-arm/mmu_context.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   27-06-1996 RMK     Created
- */
-#ifndef __ASM_ARM_MMU_CONTEXT_H
-#define __ASM_ARM_MMU_CONTEXT_H
-
-#include <asm-generic/mm_hooks.h>
-
-#define init_new_context(tsk,mm)        0
-#define destroy_context(mm)             do { } while(0)
-
-/*
- * This is called when "tsk" is about to enter lazy TLB mode.
- *
- * mm:  describes the currently active mm context
- * tsk: task which is entering lazy tlb
- * cpu: cpu number which is entering lazy tlb
- *
- * tsk->mm will be NULL
- */
-static inline void
-enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/*
- * This is the actual mm switch as far as the scheduler
- * is concerned.  No registers are touched.
- */
-static inline void
-switch_mm(struct mm_struct *prev, struct mm_struct *next,
-          struct task_struct *tsk)
-{
-        cpu_switch_mm(next->pgd, next);
-}
-
-#define deactivate_mm(tsk,mm)   do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
-{
-        cpu_switch_mm(next->pgd, next);
-}
-
-#endif
diff --git a/include/asm-arm26/module.h b/include/asm-arm26/module.h
deleted file mode 100644
index 1157f178daec..000000000000
--- a/include/asm-arm26/module.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ASM_ARM_MODULE_H
-#define _ASM_ARM_MODULE_H
-/*
- * This file contains the arm architecture specific module code.
- */
-
-#endif /* _ASM_ARM_MODULE_H */
diff --git a/include/asm-arm26/msgbuf.h b/include/asm-arm26/msgbuf.h
deleted file mode 100644
index 33b35b946eaa..000000000000
--- a/include/asm-arm26/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _ASMARM_MSGBUF_H
-#define _ASMARM_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-        struct ipc64_perm msg_perm;
-        __kernel_time_t msg_stime;      /* last msgsnd time */
-        unsigned long   __unused1;
-        __kernel_time_t msg_rtime;      /* last msgrcv time */
-        unsigned long   __unused2;
-        __kernel_time_t msg_ctime;      /* last change time */
-        unsigned long   __unused3;
-        unsigned long  msg_cbytes;      /* current number of bytes on queue */
-        unsigned long  msg_qnum;        /* number of messages in queue */
-        unsigned long  msg_qbytes;      /* max number of bytes on queue */
-        __kernel_pid_t msg_lspid;       /* pid of last msgsnd */
-        __kernel_pid_t msg_lrpid;       /* last receive pid */
-        unsigned long  __unused4;
-        unsigned long  __unused5;
-};
-
-#endif /* _ASMARM_MSGBUF_H */
diff --git a/include/asm-arm26/namei.h b/include/asm-arm26/namei.h
deleted file mode 100644
index 3f5d340110eb..000000000000
--- a/include/asm-arm26/namei.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* 
- * linux/include/asm-arm26/namei.h
- *
- * Routines to handle famous /usr/gnemul
- * Derived from the Sparc version of this file
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASMARM_NAMEI_H
-#define __ASMARM_NAMEI_H
-
-#define ARM_BSD_EMUL "usr/gnemul/bsd/"
-
-static inline char *__emul_prefix(void)
-{
-        switch (current->personality) {
-        case PER_BSD:
-                return ARM_BSD_EMUL;
-        default:
-                return NULL;
-        }
-}
-
-#endif /* __ASMARM_NAMEI_H */
diff --git a/include/asm-arm26/oldlatches.h b/include/asm-arm26/oldlatches.h
deleted file mode 100644
index bc87089b2152..000000000000
--- a/include/asm-arm26/oldlatches.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-arc/oldlatches.h
- *
- *  Copyright (C) 1996 Russell King, Dave Gilbert
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Modifications:
- *   04-04-1998 PJB/RMK Merged arc and a5k versions
- */
-#ifndef _ASM_ARCH_OLDLATCH_H
-#define _ASM_ARCH_OLDLATCH_H
-
-#define LATCHA_FDSEL0    (1<<0)
-#define LATCHA_FDSEL1    (1<<1)
-#define LATCHA_FDSEL2    (1<<2)
-#define LATCHA_FDSEL3    (1<<3)
-#define LATCHA_FDSELALL  (0xf)
-#define LATCHA_SIDESEL   (1<<4)
-#define LATCHA_MOTOR     (1<<5)
-#define LATCHA_INUSE     (1<<6)
-#define LATCHA_CHANGERST (1<<7)
-
-#define LATCHB_FDCDENSITY  (1<<1)
-#define LATCHB_FDCRESET    (1<<3)
-#define LATCHB_PRINTSTROBE (1<<4)
-
-/* newval=(oldval & mask)|newdata */
-void oldlatch_bupdate(unsigned char mask,unsigned char newdata);
-
-/* newval=(oldval & mask)|newdata */
-void oldlatch_aupdate(unsigned char mask,unsigned char newdata);
-
-#endif
-
diff --git a/include/asm-arm26/page.h b/include/asm-arm26/page.h
deleted file mode 100644
index fa19de28fda0..000000000000
--- a/include/asm-arm26/page.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _ASMARM_PAGE_H
-#define _ASMARM_PAGE_H
-
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-extern void __clear_user_page(void *p, unsigned long user);
-extern void __copy_user_page(void *to, const void *from, unsigned long user);
-extern void copy_page(void *to, const void *from);
-
-//FIXME these may be wrong on ARM26
-#define clear_user_page(addr,vaddr,pg)                  \
-        do {                                            \
-                preempt_disable();                      \
-                __clear_user_page(addr, vaddr); \
-                preempt_enable();                       \
-        } while (0)
-
-#define copy_user_page(to,from,vaddr,pg)                \
-        do {                                            \
-                preempt_disable();                      \
-                __copy_user_page(to, from, vaddr);      \
-                preempt_enable();                       \
-        } while (0)
-
-#define clear_page(page)        memzero((void *)(page), PAGE_SIZE)
-#define copy_page(to, from)  __copy_user_page(to, from, 0);
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-#define pgd_val(x)      ((x).pgd)
-#define pte_val(x)      ((x).pte)
-#define pmd_val(x)      ((x).pmd)
-#define pgprot_val(x)   ((x).pgprot)
-
-#define __pte(x)        ((pte_t) { (x) } )
-#define __pmd(x)        ((pmd_t) { (x) } )
-#define __pgprot(x)     ((pgprot_t) { (x) } )
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef unsigned long pgd_t;
-typedef unsigned long pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgprot_t;
-
-//FIXME - should these cast to unsigned long?
-#define pgd_val(x)      (x)
-#define pte_val(x)      (x)
-#define pmd_val(x)      (x)
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pmd(x)        (x)
-#define __pgprot(x)     (x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-#endif /* !__ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-/* PAGE_SHIFT determines the page size.  This is configurable. */
-#if defined(CONFIG_PAGESIZE_16)
-#define PAGE_SHIFT      14              /* 16K */
-#else           /* default */
-#define PAGE_SHIFT      15              /* 32K */
-#endif
-
-#define EXEC_PAGESIZE   32768
-
-#define PAGE_SIZE               (1UL << PAGE_SHIFT)
-#define PAGE_MASK               (~(PAGE_SIZE-1))
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)        (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#include <asm/memory.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_EXEC | \
-                                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/page.h>
-
-#endif
diff --git a/include/asm-arm26/param.h b/include/asm-arm26/param.h
deleted file mode 100644
index 6b1e52df542e..000000000000
--- a/include/asm-arm26/param.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/include/asm-arm/param.h
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PARAM_H
-#define __ASM_PARAM_H
-
-#ifndef __KERNEL_HZ
-#define __KERNEL_HZ     100
-#endif
-
-#ifdef __KERNEL__
-# define HZ             __KERNEL_HZ     /* Internal kernel timer frequency */
-# define USER_HZ        100             /* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ)       /* like times() */
-#else
-# define HZ             100
-#endif
-
-#ifndef NOGROUP
-#define NOGROUP         (-1)
-#endif
-
-/* max length of hostname */
-#define MAXHOSTNAMELEN  64
-
-#endif
-
diff --git a/include/asm-arm26/parport.h b/include/asm-arm26/parport.h
deleted file mode 100644
index f2f90c76ddd1..000000000000
--- a/include/asm-arm26/parport.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/parport.h: ARM-specific parport initialisation
- *
- *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef __ASMARM_PARPORT_H
-#define __ASMARM_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-        return parport_pc_find_isa_ports (autoirq, autodma);
-}
-
-#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/include/asm-arm26/pci.h b/include/asm-arm26/pci.h
deleted file mode 100644
index 6ac67ed7718c..000000000000
--- a/include/asm-arm26/pci.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/* Should not be needed. IDE stupidity */
-/* JMA 18.05.03 - is kinda needed, if only to tell it we don't have a PCI bus */
-
-#define PCI_DMA_BUS_IS_PHYS             0
-#define pcibios_scan_all_fns(a, b)      0
-
diff --git a/include/asm-arm26/percpu.h b/include/asm-arm26/percpu.h
deleted file mode 100644
index b4e32d8ec072..000000000000
--- a/include/asm-arm26/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARM_PERCPU
-#define __ARM_PERCPU
-
-#include <asm-generic/percpu.h>
-
-#endif
diff --git a/include/asm-arm26/pgalloc.h b/include/asm-arm26/pgalloc.h
deleted file mode 100644
index 7725af3ddb4d..000000000000
--- a/include/asm-arm26/pgalloc.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *  linux/include/asm-arm/pgalloc.h
- *
- *  Copyright (C) 2000-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGALLOC_H
-#define _ASMARM_PGALLOC_H
-
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <linux/slab.h>
-
-extern struct kmem_cache *pte_cache;
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr){
-        return kmem_cache_alloc(pte_cache, GFP_KERNEL);
-}
-
-static inline void pte_free_kernel(pte_t *pte){
-        if (pte)
-                kmem_cache_free(pte_cache, pte);
-}
-
-/*
- * Populate the pmdp entry with a pointer to the pte.  This pmd is part
- * of the mm address space.
- *
- * If 'mm' is the init tasks mm, then we are doing a vmalloc, and we
- * need to set stuff up correctly for it.
- */
-static inline void
-pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
-{
-//FIXME - is this doing the right thing?
-        set_pmd(pmdp, (unsigned long)ptep | 1/*FIXME _PMD_PRESENT*/);
-}
-
-/*
- * FIXME - We use the old 2.5.5-rmk1 hack for this.
- * This is not truly correct, but should be functional.
- */
-#define pte_alloc_one(mm,addr)  ((struct page *)pte_alloc_one_kernel(mm,addr))
-#define pte_free(pte)           pte_free_kernel((pte_t *)pte)
-#define pmd_populate(mm,pmdp,ptep) pmd_populate_kernel(mm,pmdp,(pte_t *)ptep)
-
-/*
- * Since we have only two-level page tables, these are trivial
- * 
- * trick __pmd_alloc into optimising away. The actual value is irrelevant though as it
- * is thrown away. It just cant be zero. -IM
- */
-
-#define pmd_alloc_one(mm,addr)          ({ BUG(); ((pmd_t *)2); })
-#define pmd_free(pmd)                   do { } while (0)
-#define pgd_populate(mm,pmd,pte)        BUG()
-
-extern pgd_t *get_pgd_slow(struct mm_struct *mm);
-extern void free_pgd_slow(pgd_t *pgd);
-
-#define pgd_alloc(mm)                   get_pgd_slow(mm)
-#define pgd_free(pgd)                   free_pgd_slow(pgd)
-
-#define check_pgt_cache()               do { } while (0)
-
-#endif
diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h
deleted file mode 100644
index 55a1a697d12b..000000000000
--- a/include/asm-arm26/pgtable.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- *  linux/include/asm-arm26/pgtable.h
- *
- *  Copyright (C) 2000-2002 Russell King
- *  Copyright (C) 2003 Ian Molton
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGTABLE_H
-#define _ASMARM_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-#include <asm/memory.h>
-
-/*
- * The table below defines the page protection levels that we insert into our
- * Linux page table version.  These get translated into the best that the
- * architecture can perform.  Note that on most ARM hardware:
- *  1) We cannot do execute protection
- *  2) If we could do execute protection, then read is implied
- *  3) write implies read permissions
- */
-#define __P000  PAGE_NONE
-#define __P001  PAGE_READONLY
-#define __P010  PAGE_COPY
-#define __P011  PAGE_COPY
-#define __P100  PAGE_READONLY
-#define __P101  PAGE_READONLY
-#define __P110  PAGE_COPY
-#define __P111  PAGE_COPY
-
-#define __S000  PAGE_NONE
-#define __S001  PAGE_READONLY
-#define __S010  PAGE_SHARED
-#define __S011  PAGE_SHARED
-#define __S100  PAGE_READONLY
-#define __S101  PAGE_READONLY
-#define __S110  PAGE_SHARED
-#define __S111  PAGE_SHARED
-
-/*
- * PMD_SHIFT determines the size of the area a second-level page table can map
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#define PGD_SHIFT               25
-#define PMD_SHIFT               20
-
-#define PGD_SIZE                (1UL << PGD_SHIFT)
-#define PGD_MASK                (~(PGD_SIZE-1))
-#define PMD_SIZE                (1UL << PMD_SHIFT)
-#define PMD_MASK                (~(PMD_SIZE-1))
-
-/* The kernel likes to use these names for the above (ick) */
-#define PGDIR_SIZE PGD_SIZE
-#define PGDIR_MASK PGD_MASK
-
-#define PTRS_PER_PGD            32
-#define PTRS_PER_PMD            1
-#define PTRS_PER_PTE            32
-
-/*
- * This is the lowest virtual address we can permit any user space
- * mapping to be mapped at.  This is particularly important for
- * non-high vector CPUs.
- */
-#define FIRST_USER_ADDRESS      PAGE_SIZE
-
-#define FIRST_USER_PGD_NR       1
-#define USER_PTRS_PER_PGD       ((TASK_SIZE/PGD_SIZE) - FIRST_USER_PGD_NR)
-
-// FIXME - WTF?
-#define LIBRARY_TEXT_START      0x0c000000
-
-
-
-#ifndef __ASSEMBLY__
-extern void __pte_error(const char *file, int line, unsigned long val);
-extern void __pmd_error(const char *file, int line, unsigned long val);
-extern void __pgd_error(const char *file, int line, unsigned long val);
-
-#define pte_ERROR(pte)          __pte_error(__FILE__, __LINE__, pte_val(pte))
-#define pmd_ERROR(pmd)          __pmd_error(__FILE__, __LINE__, pmd_val(pmd))
-#define pgd_ERROR(pgd)          __pgd_error(__FILE__, __LINE__, pgd_val(pgd))
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)        (empty_zero_page)
-
-#define pte_pfn(pte)            (pte_val(pte) >> PAGE_SHIFT)
-#define pte_page(pte)           (pfn_to_page(pte_pfn(pte)))
-#define pfn_pte(pfn,prot)       (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
-#define pages_to_mb(x)          ((x) >> (20 - PAGE_SHIFT))
-#define mk_pte(page,prot)       pfn_pte(page_to_pfn(page),prot)
-
-/*
- * Terminology: PGD = Page Directory, PMD = Page Middle Directory,
- *              PTE = Page Table Entry
- *
- * on arm26 we have no 2nd level page table. we simulate this by removing the
- * PMD.
- *
- * pgd_none is 0 to prevernt pmd_alloc() calling __pmd_alloc(). This causes it
- * to return pmd_offset(pgd,addr) which is a pointer to the pgd (IOW, a no-op).
- *
- * however, to work this way, whilst we are allocating 32 pgds, containing 32
- * PTEs, the actual work is done on the PMDs, thus:
- *
- * instead of  mm->pgd->pmd->pte
- * we have     mm->pgdpmd->pte
- *
- * IOW, think of PGD operations and PMD ones as being the same thing, just
- * that PGD stuff deals with the mm_struct side of things, wheras PMD stuff
- * deals with the pte side of things.
- *
- * additionally, we store some bits in the PGD and PTE pointers: 
- * PGDs:
- *   o The lowest (1) bit of the PGD is to determine if it is present or swap.
- *   o The 2nd bit of the PGD is unused and must be zero.
- *   o The top 6 bits of the PGD must be zero. 
- * PTEs:
- *   o The lower 5 bits of a pte are flags. bit 1 is the 'present' flag. The
- *     others determine the pages attributes.
- *
- * the pgd_val, pmd_val, and pte_val macros seem to be private to our code.
- * They get the RAW value of the PGD/PMD/PTE entry, including our flags
- * encoded into the pointers.
- * 
- * The pgd_offset, pmd_offset, and pte_offset macros are used by the kernel,
- * so they shouldnt have our flags attached.
- *
- * If you understood that, feel free to explain it to me...
- *
- */
-
-#define _PMD_PRESENT     (0x01)
-
-/* These definitions allow us to optimise out stuff like pmd_alloc() */
-#define pgd_none(pgd)           (0) 
-#define pgd_bad(pgd)            (0)
-#define pgd_present(pgd)        (1)
-#define pgd_clear(pgdp)         do { } while (0)
-
-/* Whilst these handle our actual 'page directory' (the agglomeration of pgd and pmd)
- */
-#define pmd_none(pmd)           (!pmd_val(pmd))
-#define pmd_bad(pmd)            ((pmd_val(pmd) & 0xfc000002))
-#define pmd_present(pmd)        (pmd_val(pmd) & _PMD_PRESENT)
-#define set_pmd(pmd_ptr, pmd)   ((*(pmd_ptr)) = (pmd))
-#define pmd_clear(pmdp)         set_pmd(pmdp, __pmd(0))
-
-/* and these handle our pte tables */
-#define pte_none(pte)           (!pte_val(pte))
-#define pte_present(pte)        (pte_val(pte) & _PAGE_PRESENT)
-#define set_pte(pte_ptr, pte)   ((*(pte_ptr)) = (pte))
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-#define pte_clear(mm,addr,ptep) set_pte_at((mm),(addr),(ptep), __pte(0))
-
-/* macros to ease the getting of pointers to stuff... */
-#define pgd_offset(mm, addr)    ((pgd_t *)(mm)->pgd        + __pgd_index(addr))
-#define pmd_offset(pgd, addr)   ((pmd_t *)(pgd))
-#define pte_offset(pmd, addr)   ((pte_t *)pmd_page(*(pmd)) + __pte_index(addr))
-
-/* there is no __pmd_index as we dont use pmds */
-#define __pgd_index(addr)       ((addr) >> PGD_SHIFT)
-#define __pte_index(addr)       (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-
-/* Keep the kernel happy */
-#define pgd_index(addr)         __pgd_index(addr)
-#define pgd_offset_k(addr)      (pgd_offset(&init_mm, addr))
-
-/*
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;) FIXME: surely 1 page not 4k ?
- */
-#define VMALLOC_START     0x01a00000
-#define VMALLOC_END       0x01c00000
-
-/* Is pmd_page supposed to return a pointer to a page in some arches? ours seems to
- * return a pointer to memory (no special alignment)
- */
-#define pmd_page(pmd)  ((struct page *)(pmd_val((pmd)) & ~_PMD_PRESENT))
-#define pmd_page_vaddr(pmd) ((pte_t *)(pmd_val((pmd)) & ~_PMD_PRESENT))
-
-#define pte_offset_kernel(dir,addr)     (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-
-#define pte_offset_map(dir,addr)        (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte)                  do { } while (0)
-#define pte_unmap_nested(pte)           do { } while (0)
-
-
-#define _PAGE_PRESENT   0x01
-#define _PAGE_READONLY  0x02
-#define _PAGE_NOT_USER  0x04
-#define _PAGE_OLD       0x08
-#define _PAGE_CLEAN     0x10
-
-// an old page has never been read.
-// a clean page has never been written.
-
-/*                               -- present --   -- !dirty --  --- !write ---   ---- !user --- */
-#define PAGE_NONE       __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY | _PAGE_NOT_USER)
-#define PAGE_SHARED     __pgprot(_PAGE_PRESENT | _PAGE_CLEAN                                  )
-#define PAGE_COPY       __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY                 )
-#define PAGE_READONLY   __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY                 )
-#define PAGE_KERNEL     __pgprot(_PAGE_PRESENT                                | _PAGE_NOT_USER)
-
-#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_OLD | _PAGE_CLEAN)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_write(pte)                  (!(pte_val(pte) & _PAGE_READONLY))
-#define pte_dirty(pte)                  (!(pte_val(pte) & _PAGE_CLEAN))
-#define pte_young(pte)                  (!(pte_val(pte) & _PAGE_OLD))
-//ONLY when !pte_present() I think. nicked from arm32 (FIXME!)
-#define pte_file(pte)                   (!(pte_val(pte) & _PAGE_OLD))
-
-#define PTE_BIT_FUNC(fn,op)                     \
-static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(wrprotect, |=  _PAGE_READONLY);
-PTE_BIT_FUNC(mkwrite,   &= ~_PAGE_READONLY);
-PTE_BIT_FUNC(mkclean,   |=  _PAGE_CLEAN);
-PTE_BIT_FUNC(mkdirty,   &= ~_PAGE_CLEAN);
-PTE_BIT_FUNC(mkold,     |=  _PAGE_OLD);
-PTE_BIT_FUNC(mkyoung,   &= ~_PAGE_OLD);
-
-/*
- * We don't store cache state bits in the page table here. FIXME - or do we?
- */
-#define pgprot_noncached(prot)  (prot)
-#define pgprot_writecombine(prot) (prot) //FIXME - is a no-op?
-
-extern void pgtable_cache_init(void);
-
-//FIXME - nicked from arm32 and brutally hacked. probably wrong.
-#define pte_to_pgoff(x) (pte_val(x) >> 2)
-#define pgoff_to_pte(x) __pte(((x) << 2) & ~_PAGE_OLD)
-
-//FIXME - next line borrowed from arm32. is it right?
-#define PTE_FILE_MAX_BITS       30
-
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-        pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
-        return pte;
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/* Encode and decode a swap entry.
- *
- * We support up to 32GB of swap on 4k machines
- */
-#define __swp_type(x)           (((x).val >> 2) & 0x7f)
-#define __swp_offset(x)         ((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-/* FIXME: this is not correct */
-#define kern_addr_valid(addr)   (1)
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
-{
-        pte_t pte;
-        pte_val(pte) = physpage | pgprot_val(pgprot);
-        return pte;
-}
-
-
-#include <asm-generic/pgtable.h>
-
-/*
- * remap a physical page `pfn' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#define io_remap_pfn_range(vma,from,pfn,size,prot) \
-                remap_pfn_range(vma, from, pfn, size, prot)
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm26/poll.h b/include/asm-arm26/poll.h
deleted file mode 100644
index 1170e7065f6a..000000000000
--- a/include/asm-arm26/poll.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASMARM_POLL_H
-#define __ASMARM_POLL_H
-
-#include <asm-generic/poll.h>
-
-#undef POLLREMOVE
-
-#endif
diff --git a/include/asm-arm26/posix_types.h b/include/asm-arm26/posix_types.h
deleted file mode 100644
index f8d1eb4f4cb1..000000000000
--- a/include/asm-arm26/posix_types.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *  linux/include/asm-arm/posix_types.h
- *
- *  Copyright (C) 1996-1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   27-06-1996 RMK     Created
- */
-#ifndef __ARCH_ARM_POSIX_TYPES_H
-#define __ARCH_ARM_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long           __kernel_ino_t;
-typedef unsigned short          __kernel_mode_t;
-typedef unsigned short          __kernel_nlink_t;
-typedef long                    __kernel_off_t;
-typedef int                     __kernel_pid_t;
-typedef unsigned short          __kernel_ipc_pid_t;
-typedef unsigned short          __kernel_uid_t;
-typedef unsigned short          __kernel_gid_t;
-typedef unsigned int            __kernel_size_t;
-typedef int                     __kernel_ssize_t;
-typedef int                     __kernel_ptrdiff_t;
-typedef long                    __kernel_time_t;
-typedef long                    __kernel_suseconds_t;
-typedef long                    __kernel_clock_t;
-typedef int                     __kernel_timer_t;
-typedef int                     __kernel_clockid_t;
-typedef int                     __kernel_daddr_t;
-typedef char *                  __kernel_caddr_t;
-typedef unsigned short          __kernel_uid16_t;
-typedef unsigned short          __kernel_gid16_t;
-typedef unsigned int            __kernel_uid32_t;
-typedef unsigned int            __kernel_gid32_t;
-
-typedef unsigned short          __kernel_old_uid_t;
-typedef unsigned short          __kernel_old_gid_t;
-typedef unsigned short          __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long               __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-        int     val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-        int     __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef  __FD_SET
-#define __FD_SET(fd, fdsetp) \
-                (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31)))
-
-#undef  __FD_CLR
-#define __FD_CLR(fd, fdsetp) \
-                (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31)))
-
-#undef  __FD_ISSET
-#define __FD_ISSET(fd, fdsetp) \
-                ((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0)
-
-#undef  __FD_ZERO
-#define __FD_ZERO(fdsetp) \
-                (memset ((fdsetp), 0, sizeof (*(fd_set *)(fdsetp))))
-
-#endif
-
-#endif
diff --git a/include/asm-arm26/proc-fns.h b/include/asm-arm26/proc-fns.h
deleted file mode 100644
index a83100454055..000000000000
--- a/include/asm-arm26/proc-fns.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/asm-arm26/proc-fns.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASSEMBLY__
-
-#include <asm/page.h>
-
-/*
- * Don't change this structure - ASM code
- * relies on it.
- */
-extern struct processor {
-        /* check for any bugs */
-        void (*_check_bugs)(void);
-        /* Set up any processor specifics */
-        void (*_proc_init)(void);
-        /* Disable any processor specifics */
-        void (*_proc_fin)(void);
-        /* set the MEMC hardware mappings */
-        void (*_set_pgd)(pgd_t *pgd);
-        /* XCHG */
-        unsigned long (*_xchg_1)(unsigned long x, volatile void *ptr);
-        unsigned long (*_xchg_4)(unsigned long x, volatile void *ptr);
-} processor;
-
-extern const struct processor arm2_processor_functions;
-extern const struct processor arm250_processor_functions;
-extern const struct processor arm3_processor_functions;
-
-#define cpu_check_bugs()                        processor._check_bugs()
-#define cpu_proc_init()                         processor._proc_init()
-#define cpu_proc_fin()                          processor._proc_fin()
-#define cpu_do_idle()                           do { } while (0)
-#define cpu_switch_mm(pgd,mm)                   processor._set_pgd(pgd)
-#define cpu_xchg_1(x,ptr)                       processor._xchg_1(x,ptr)
-#define cpu_xchg_4(x,ptr)                       processor._xchg_4(x,ptr)
-
-
-//FIXME - these shouldnt be in proc-fn.h
-extern void cpu_memc_update_all(pgd_t *pgd);
-extern void cpu_memc_update_entry(pgd_t *pgd, unsigned long phys_pte, unsigned long log_addr);
-
-#endif
diff --git a/include/asm-arm26/processor.h b/include/asm-arm26/processor.h
deleted file mode 100644
index 1d2d5f7b467b..000000000000
--- a/include/asm-arm26/processor.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- *  linux/include/asm-arm26/processor.h
- *
- *  Copyright (C) 1995 Russell King
- *  Copyright (C) 2003 Ian Molton
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_PROCESSOR_H
-#define __ASM_ARM_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#ifdef __KERNEL__
-
-#include <asm/atomic.h>
-#include <asm/ptrace.h>
-#include <linux/string.h>
-
-#define KERNEL_STACK_SIZE 4096
-
-typedef struct {
-        void (*put_byte)(void);               /* Special calling convention */
-        void (*get_byte)(void);               /* Special calling convention */
-        void (*put_half)(void);               /* Special calling convention */
-        void (*get_half)(void);               /* Special calling convention */
-        void (*put_word)(void);               /* Special calling convention */
-        void (*get_word)(void);               /* Special calling convention */
-        void (*put_dword)(void);              /* Special calling convention */
-        unsigned long (*copy_from_user)(void *to, const void *from, unsigned long sz);
-        unsigned long (*copy_to_user)(void *to, const void *from, unsigned long sz);
-        unsigned long (*clear_user)(void *addr, unsigned long sz);
-        unsigned long (*strncpy_from_user)(char *to, const char *from, unsigned long sz);
-        unsigned long (*strnlen_user)(const char *s, long n);
-} uaccess_t;
-
-extern uaccess_t uaccess_user, uaccess_kernel;
-
-#define EXTRA_THREAD_STRUCT                     \
-        uaccess_t       *uaccess;         /* User access functions*/
-
-#define EXTRA_THREAD_STRUCT_INIT                \
-        .uaccess        = &uaccess_kernel,
-
-// FIXME?!!
-
-#define start_thread(regs,pc,sp)                                        \
-({                                                                      \
-        unsigned long *stack = (unsigned long *)sp;                     \
-        set_fs(USER_DS);                                                \
-        memzero(regs->uregs, sizeof (regs->uregs));                     \
-        regs->ARM_pc = pc | ~0xfc000003;        /* pc */                \
-        regs->ARM_sp = sp;              /* sp */                        \
-        regs->ARM_r2 = stack[2];        /* r2 (envp) */                 \
-        regs->ARM_r1 = stack[1];        /* r1 (argv) */                 \
-        regs->ARM_r0 = stack[0];        /* r0 (argc) */                 \
-})
-
-#define KSTK_EIP(tsk)   (((unsigned long *)(4096+(unsigned long)(tsk)))[1020])
-#define KSTK_ESP(tsk)   (((unsigned long *)(4096+(unsigned long)(tsk)))[1018])
-
-struct debug_entry {
-        u32                     address;
-        u32                     insn;
-};
-
-struct debug_info {
-        int                     nsaved;
-        struct debug_entry      bp[2];
-};
-
-struct thread_struct {
-                                                        /* fault info     */
-        unsigned long                   address;
-        unsigned long                   trap_no;
-        unsigned long                   error_code;
-                                                        /* debugging      */
-        struct debug_info               debug;
-        EXTRA_THREAD_STRUCT
-};
-
-#define INIT_THREAD  { \
-EXTRA_THREAD_STRUCT_INIT \
-}
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define cpu_relax()                     barrier()
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)    do { } while (0)
-
-/*
- * Create a new kernel thread
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-#endif
-
-#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/include/asm-arm26/procinfo.h b/include/asm-arm26/procinfo.h
deleted file mode 100644
index b28624db69ff..000000000000
--- a/include/asm-arm26/procinfo.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-arm/procinfo.h
- *
- *  Copyright (C) 1996-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PROCINFO_H
-#define __ASM_PROCINFO_H
-
-#ifndef __ASSEMBLY__
-
-//struct processor;
-//struct cpu_user_fns;
-
-struct proc_info_item {
-        const char       *manufacturer;
-        const char       *cpu_name;
-};
-
-/*
- * Note!  struct processor is always defined if we're
- * using MULTI_CPU, otherwise this entry is unused,
- * but still exists.
- *
- * NOTE! The following structure is defined by assembly
- * language, NOT C code.  For more information, check:
- *  arch/arm/mm/proc-*.S and arch/arm/kernel/head-armv.S
- */
-struct proc_info_list {
-        unsigned int            cpu_val;
-        unsigned int            cpu_mask;
-        const char              *arch_name;
-        const char              *elf_name;
-        unsigned int            elf_hwcap;
-        struct proc_info_item   *info;
-        struct processor        *proc;
-};
-
-#endif  /* __ASSEMBLY__ */
-
-#define PROC_INFO_SZ    48
-
-#define HWCAP_SWP       1
-#define HWCAP_HALF      2
-#define HWCAP_THUMB     4
-#define HWCAP_26BIT     8       /* Play it safe */
-#define HWCAP_FAST_MULT 16
-#define HWCAP_FPA       32
-#define HWCAP_VFP       64
-#define HWCAP_EDSP      128
-#define HWCAP_JAVA      256
-
-#endif
diff --git a/include/asm-arm26/ptrace.h b/include/asm-arm26/ptrace.h
deleted file mode 100644
index 6a46b5ae1156..000000000000
--- a/include/asm-arm26/ptrace.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef __ASM_ARM_PTRACE_H
-#define __ASM_ARM_PTRACE_H
-
-#define PTRACE_GETREGS          12
-#define PTRACE_SETREGS          13
-#define PTRACE_GETFPREGS        14
-#define PTRACE_SETFPREGS        15
-#define PTRACE_OLDSETOPTIONS    21
-
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD   0x00000001
-
-#define MODE_USR26      0x00000000
-#define MODE_FIQ26      0x00000001
-#define MODE_IRQ26      0x00000002
-#define MODE_SVC26      0x00000003
-#define MODE_MASK       0x00000003
-
-#define PSR_F_BIT       0x04000000
-#define PSR_I_BIT       0x08000000
-#define PSR_V_BIT       0x10000000
-#define PSR_C_BIT       0x20000000
-#define PSR_Z_BIT       0x40000000
-#define PSR_N_BIT       0x80000000
-
-#define PCMASK          0xfc000003
-
-
-#ifndef __ASSEMBLY__
-
-#define pc_pointer(v) ((v) & ~PCMASK)   /* convert v to pc type address */
-#define instruction_pointer(regs) (pc_pointer((regs)->ARM_pc)) /* get pc */
-#define profile_pc(regs) instruction_pointer(regs)
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-        long uregs[17];
-};
-
-#define ARM_pc          uregs[15]
-#define ARM_lr          uregs[14]
-#define ARM_sp          uregs[13]
-#define ARM_ip          uregs[12]
-#define ARM_fp          uregs[11]
-#define ARM_r10         uregs[10]
-#define ARM_r9          uregs[9]
-#define ARM_r8          uregs[8]
-#define ARM_r7          uregs[7]
-#define ARM_r6          uregs[6]
-#define ARM_r5          uregs[5]
-#define ARM_r4          uregs[4]
-#define ARM_r3          uregs[3]
-#define ARM_r2          uregs[2]
-#define ARM_r1          uregs[1]
-#define ARM_r0          uregs[0]
-#define ARM_ORIG_r0     uregs[16]
-
-#ifdef __KERNEL__
-
-#define processor_mode(regs) \
-        ((regs)->ARM_pc & MODE_MASK)
-
-#define user_mode(regs) \
-        (processor_mode(regs) == MODE_USR26)
-
-#define interrupts_enabled(regs) \
-        (!((regs)->ARM_pc & PSR_I_BIT))
-
-#define fast_interrupts_enabled(regs) \
-        (!((regs)->ARM_pc & PSR_F_BIT))
-
-#define condition_codes(regs) \
-        ((regs)->ARM_pc & (PSR_V_BIT|PSR_C_BIT|PSR_Z_BIT|PSR_N_BIT))
-
-/* Are the current registers suitable for user mode?
- * (used to maintain security in signal handlers)
- */
-static inline int valid_user_regs(struct pt_regs *regs)
-{
-        if (user_mode(regs) &&
-            (regs->ARM_pc & (PSR_F_BIT | PSR_I_BIT)) == 0)
-                return 1;
-
-        /*
-         * force it to be something sensible
-         */
-        regs->ARM_pc &= ~(MODE_MASK | PSR_F_BIT | PSR_I_BIT);
-
-        return 0;
-}
-
-extern void show_regs(struct pt_regs *);
-
-#define predicate(x)    (x & 0xf0000000)
-#define PREDICATE_ALWAYS        0xe0000000
-
-#endif  /* __KERNEL__ */
-
-#endif  /* __ASSEMBLY__ */
-
-#endif
-
diff --git a/include/asm-arm26/resource.h b/include/asm-arm26/resource.h
deleted file mode 100644
index 734b581b5b6a..000000000000
--- a/include/asm-arm26/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ARM_RESOURCE_H
-#define _ARM_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif
diff --git a/include/asm-arm26/scatterlist.h b/include/asm-arm26/scatterlist.h
deleted file mode 100644
index d9c056c7784e..000000000000
--- a/include/asm-arm26/scatterlist.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _ASMARM_SCATTERLIST_H
-#define _ASMARM_SCATTERLIST_H
-
-#include <asm/types.h>
-
-struct scatterlist {
-        struct page     *page;          /* buffer page                   */
-        unsigned int    offset;         /* buffer offset                 */
-        dma_addr_t      dma_address;    /* dma address                   */
-        unsigned int    length;         /* length                        */
-        char            *__address;     /* for set_dma_addr              */
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
-#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/include/asm-arm26/sections.h b/include/asm-arm26/sections.h
deleted file mode 100644
index 10b6370efad0..000000000000
--- a/include/asm-arm26/sections.h
+++ /dev/null
@@ -1,2 +0,0 @@
-//FIXME - nicked from arm32 - check its correct.
-#include <asm-generic/sections.h>
diff --git a/include/asm-arm26/segment.h b/include/asm-arm26/segment.h
deleted file mode 100644
index 9e24c21f6304..000000000000
--- a/include/asm-arm26/segment.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_ARM_SEGMENT_H
-#define __ASM_ARM_SEGMENT_H
-
-#define __KERNEL_CS   0x0
-#define __KERNEL_DS   0x0
-
-#define __USER_CS     0x1
-#define __USER_DS     0x1
-
-#endif /* __ASM_ARM_SEGMENT_H */
-
diff --git a/include/asm-arm26/semaphore-helper.h b/include/asm-arm26/semaphore-helper.h
deleted file mode 100644
index 1d7f1987edb9..000000000000
--- a/include/asm-arm26/semaphore-helper.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef ASMARM_SEMAPHORE_HELPER_H
-#define ASMARM_SEMAPHORE_HELPER_H
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-static inline void wake_one_more(struct semaphore * sem)
-{
-        unsigned long flags;
-
-        spin_lock_irqsave(&semaphore_wake_lock, flags);
-        if (atomic_read(&sem->count) <= 0)
-                sem->waking++;
-        spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-}
-
-static inline int waking_non_zero(struct semaphore *sem)
-{
-        unsigned long flags;
-        int ret = 0;
-
-        spin_lock_irqsave(&semaphore_wake_lock, flags);
-        if (sem->waking > 0) {
-                sem->waking--;
-                ret = 1;
-        }
-        spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-        return ret;
-}
-
-/*
- * waking non zero interruptible
- *      1       got the lock
- *      0       go to sleep
- *      -EINTR  interrupted
- *
- * We must undo the sem->count down_interruptible() increment while we are
- * protected by the spinlock in order to make this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-static inline int waking_non_zero_interruptible(struct semaphore *sem,
-                                                struct task_struct *tsk)
-{
-        unsigned long flags;
-        int ret = 0;
-
-        spin_lock_irqsave(&semaphore_wake_lock, flags);
-        if (sem->waking > 0) {
-                sem->waking--;
-                ret = 1;
-        } else if (signal_pending(tsk)) {
-                atomic_inc(&sem->count);
-                ret = -EINTR;
-        }
-        spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-        return ret;     
-}
-
-/*
- * waking_non_zero_try_lock:
- *      1       failed to lock
- *      0       got the lock
- *
- * We must undo the sem->count down_interruptible() increment while we are
- * protected by the spinlock in order to make this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-static inline int waking_non_zero_trylock(struct semaphore *sem)
-{
-        unsigned long flags;
-        int ret = 1;
-
-        spin_lock_irqsave(&semaphore_wake_lock, flags);
-        if (sem->waking <= 0)
-                atomic_inc(&sem->count);
-        else {
-                sem->waking--;
-                ret = 0;
-        }
-        spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-        return ret;
-}
-
-#endif
diff --git a/include/asm-arm26/semaphore.h b/include/asm-arm26/semaphore.h
deleted file mode 100644
index 1fda54375ed8..000000000000
--- a/include/asm-arm26/semaphore.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/include/asm-arm26/semaphore.h
- */
-#ifndef __ASM_ARM_SEMAPHORE_H
-#define __ASM_ARM_SEMAPHORE_H
-
-#include <linux/linkage.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-#include <asm/atomic.h>
-#include <asm/locks.h>
-
-struct semaphore {
-        atomic_t count;
-        int sleepers;
-        wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INIT(name, n)                                       \
-{                                                                       \
-        .count          = ATOMIC_INIT(n),                               \
-        .sleepers       = 0,                                            \
-        .wait           = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait),   \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
-        struct semaphore name = __SEMAPHORE_INIT(name,count)
-
-#define DECLARE_MUTEX(name)             __DECLARE_SEMAPHORE_GENERIC(name,1)
-#define DECLARE_MUTEX_LOCKED(name)      __DECLARE_SEMAPHORE_GENERIC(name,0)
-
-static inline void sema_init(struct semaphore *sem, int val)
-{
-        atomic_set(&sem->count, val);
-        sem->sleepers = 0;
-        init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX(struct semaphore *sem)
-{
-        sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED(struct semaphore *sem)
-{
-        sema_init(sem, 0);
-}
-
-/*
- * special register calling convention
- */
-asmlinkage void __down_failed(void);
-asmlinkage int  __down_interruptible_failed(void);
-asmlinkage int  __down_trylock_failed(void);
-asmlinkage void __up_wakeup(void);
-
-extern void __down(struct semaphore * sem);
-extern int  __down_interruptible(struct semaphore * sem);
-extern int  __down_trylock(struct semaphore * sem);
-extern void __up(struct semaphore * sem);
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "__down" is the actual routine that waits...
- */
-static inline void down(struct semaphore * sem)
-{
-        might_sleep();
-        __down_op(sem, __down_failed);
-}
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "__down_interruptible" is the actual routine that waits...
- */
-static inline int down_interruptible (struct semaphore * sem)
-{
-        might_sleep();
-        return __down_op_ret(sem, __down_interruptible_failed);
-}
-
-static inline int down_trylock(struct semaphore *sem)
-{
-        return __down_op_ret(sem, __down_trylock_failed);
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
-        __up_op(sem, __up_wakeup);
-}
-
-#endif
diff --git a/include/asm-arm26/sembuf.h b/include/asm-arm26/sembuf.h
deleted file mode 100644
index 1c0283954289..000000000000
--- a/include/asm-arm26/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASMARM_SEMBUF_H
-#define _ASMARM_SEMBUF_H
-
-/* 
- * The semid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-        struct ipc64_perm sem_perm;             /* permissions .. see ipc.h */
-        __kernel_time_t sem_otime;              /* last semop time */
-        unsigned long   __unused1;
-        __kernel_time_t sem_ctime;              /* last change time */
-        unsigned long   __unused2;
-        unsigned long   sem_nsems;              /* no. of semaphores in array */
-        unsigned long   __unused3;
-        unsigned long   __unused4;
-};
-
-#endif /* _ASMARM_SEMBUF_H */
diff --git a/include/asm-arm26/serial.h b/include/asm-arm26/serial.h
deleted file mode 100644
index dd86a716cb0b..000000000000
--- a/include/asm-arm26/serial.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/include/asm-arm/serial.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   15-10-1996 RMK     Created
- */
-
-#ifndef __ASM_SERIAL_H
-#define __ASM_SERIAL_H
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD (1843200 / 16)
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#if defined(CONFIG_ARCH_A5K)
-     /* UART CLK        PORT  IRQ     FLAGS        */
-
-#define SERIAL_PORT_DFNS                                                \
-        { 0, BASE_BAUD, 0x3F8, 10, STD_COM_FLAGS },     /* ttyS0 */     \
-        { 0, BASE_BAUD, 0x2F8, 10, STD_COM_FLAGS },     /* ttyS1 */
-
-#else
-
-#define SERIAL_PORT_DFNS                                                \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS0 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS1 */
-
-#endif
-
-#endif
diff --git a/include/asm-arm26/setup.h b/include/asm-arm26/setup.h
deleted file mode 100644
index e82562306475..000000000000
--- a/include/asm-arm26/setup.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- *  linux/include/asm/setup.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Structure passed to kernel to tell it about the
- *  hardware it's running on.  See Documentation/arm/Setup
- *  for more info.
- */
-#ifndef __ASMARM_SETUP_H
-#define __ASMARM_SETUP_H
-
-#define COMMAND_LINE_SIZE 1024
-
-#ifdef __KERNEL__
-
-/* The list ends with an ATAG_NONE node. */
-#define ATAG_NONE       0x00000000
-
-struct tag_header {
-        u32 size;
-        u32 tag;
-};
-
-/* The list must start with an ATAG_CORE node */
-#define ATAG_CORE       0x54410001
-
-struct tag_core {
-        u32 flags;              /* bit 0 = read-only */
-        u32 pagesize;
-        u32 rootdev;
-};
-
-/* it is allowed to have multiple ATAG_MEM nodes */
-#define ATAG_MEM        0x54410002
-
-struct tag_mem32 {
-        u32     size;
-        u32     start;  /* physical start address */
-};
-
-/* VGA text type displays */
-#define ATAG_VIDEOTEXT  0x54410003
-
-struct tag_videotext {
-        u8              x;
-        u8              y;
-        u16             video_page;
-        u8              video_mode;
-        u8              video_cols;
-        u16             video_ega_bx;
-        u8              video_lines;
-        u8              video_isvga;
-        u16             video_points;
-};
-
-/* describes how the ramdisk will be used in kernel */
-#define ATAG_RAMDISK    0x54410004
-
-struct tag_ramdisk {
-        u32 flags;      /* bit 0 = load, bit 1 = prompt */
-        u32 size;       /* decompressed ramdisk size in _kilo_ bytes */
-        u32 start;      /* starting block of floppy-based RAM disk image */
-};
-
-/* describes where the compressed ramdisk image lives */
-/*
- * this one accidentally used virtual addresses - as such,
- * it's deprecated.
- */
-#define ATAG_INITRD     0x54410005
-
-/* describes where the compressed ramdisk image lives */
-#define ATAG_INITRD2    0x54420005
-
-struct tag_initrd {
-        u32 start;      /* physical start address */
-        u32 size;       /* size of compressed ramdisk image in bytes */
-};
-
-/* board serial number. "64 bits should be enough for everybody" */
-#define ATAG_SERIAL     0x54410006
-
-struct tag_serialnr {
-        u32 low;
-        u32 high;
-};
-
-/* board revision */
-#define ATAG_REVISION   0x54410007
-
-struct tag_revision {
-        u32 rev;
-};
-
-/* initial values for vesafb-type framebuffers. see struct screen_info
- * in include/linux/tty.h
- */
-#define ATAG_VIDEOLFB   0x54410008
-
-struct tag_videolfb {
-        u16             lfb_width;
-        u16             lfb_height;
-        u16             lfb_depth;
-        u16             lfb_linelength;
-        u32             lfb_base;
-        u32             lfb_size;
-        u8              red_size;
-        u8              red_pos;
-        u8              green_size;
-        u8              green_pos;
-        u8              blue_size;
-        u8              blue_pos;
-        u8              rsvd_size;
-        u8              rsvd_pos;
-};
-
-/* command line: \0 terminated string */
-#define ATAG_CMDLINE    0x54410009
-
-struct tag_cmdline {
-        char    cmdline[1];     /* this is the minimum size */
-};
-
-/* acorn RiscPC specific information */
-#define ATAG_ACORN      0x41000101
-
-struct tag_acorn {
-        u32 memc_control_reg;
-        u32 vram_pages;
-        u8 sounddefault;
-        u8 adfsdrives;
-};
-
-/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
-#define ATAG_MEMCLK     0x41000402
-
-struct tag_memclk {
-        u32 fmemclk;
-};
-
-struct tag {
-        struct tag_header hdr;
-        union {
-                struct tag_core         core;
-                struct tag_mem32        mem;
-                struct tag_videotext    videotext;
-                struct tag_ramdisk      ramdisk;
-                struct tag_initrd       initrd;
-                struct tag_serialnr     serialnr;
-                struct tag_revision     revision;
-                struct tag_videolfb     videolfb;
-                struct tag_cmdline      cmdline;
-
-                /*
-                 * Acorn specific
-                 */
-                struct tag_acorn        acorn;
-
-                /*
-                 * DC21285 specific
-                 */
-                struct tag_memclk       memclk;
-        } u;
-};
-
-struct tagtable {
-        u32 tag;
-        int (*parse)(const struct tag *);
-};
-
-#define __tag __used __attribute__((__section__(".taglist")))
-#define __tagtable(tag, fn) \
-static struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-#define tag_member_present(tag,member)                          \
-        ((unsigned long)(&((struct tag *)0L)->member + 1)       \
-                <= (tag)->hdr.size * 4)
-
-#define tag_next(t)     ((struct tag *)((u32 *)(t) + (t)->hdr.size))
-#define tag_size(type)  ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-
-#define for_each_tag(t,base)            \
-        for (t = base; t->hdr.size; t = tag_next(t))
-
-/*
- * Memory map description
- */
-#define NR_BANKS 8
-
-struct meminfo {
-        int nr_banks;
-        unsigned long end;
-        struct {
-                unsigned long start;
-                unsigned long size;
-                int           node;
-        } bank[NR_BANKS];
-};
-
-extern struct meminfo meminfo;
-
-#endif  /*  __KERNEL__  */
-
-#endif
diff --git a/include/asm-arm26/shmbuf.h b/include/asm-arm26/shmbuf.h
deleted file mode 100644
index 2e5c67ba1c97..000000000000
--- a/include/asm-arm26/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASMARM_SHMBUF_H
-#define _ASMARM_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-        struct ipc64_perm       shm_perm;       /* operation perms */
-        size_t                  shm_segsz;      /* size of segment (bytes) */
-        __kernel_time_t         shm_atime;      /* last attach time */
-        unsigned long           __unused1;
-        __kernel_time_t         shm_dtime;      /* last detach time */
-        unsigned long           __unused2;
-        __kernel_time_t         shm_ctime;      /* last change time */
-        unsigned long           __unused3;
-        __kernel_pid_t          shm_cpid;       /* pid of creator */
-        __kernel_pid_t          shm_lpid;       /* pid of last operator */
-        unsigned long           shm_nattch;     /* no. of current attaches */
-        unsigned long           __unused4;
-        unsigned long           __unused5;
-};
-
-struct shminfo64 {
-        unsigned long   shmmax;
-        unsigned long   shmmin;
-        unsigned long   shmmni;
-        unsigned long   shmseg;
-        unsigned long   shmall;
-        unsigned long   __unused1;
-        unsigned long   __unused2;
-        unsigned long   __unused3;
-        unsigned long   __unused4;
-};
-
-#endif /* _ASMARM_SHMBUF_H */
diff --git a/include/asm-arm26/shmparam.h b/include/asm-arm26/shmparam.h
deleted file mode 100644
index d3748686631e..000000000000
--- a/include/asm-arm26/shmparam.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASMARM_SHMPARAM_H
-#define _ASMARM_SHMPARAM_H
-
-#ifndef SHMMAX
-#define SHMMAX          0x003fa000
-#endif
-
-/*
- * This should be the size of the virtually indexed cache/ways,
- * or page size, whichever is greater since the cache aliases
- * every size/ways bytes.
- */
-#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
-
-#endif /* _ASMARM_SHMPARAM_H */
diff --git a/include/asm-arm26/sigcontext.h b/include/asm-arm26/sigcontext.h
deleted file mode 100644
index 013ad2074fc7..000000000000
--- a/include/asm-arm26/sigcontext.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _ASMARM_SIGCONTEXT_H
-#define _ASMARM_SIGCONTEXT_H
-
-/*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked.  Note: only add new entries
- * to the end of the structure.
- */
-struct sigcontext {
-        unsigned long trap_no;
-        unsigned long error_code;
-        unsigned long oldmask;
-        unsigned long arm_r0;
-        unsigned long arm_r1;
-        unsigned long arm_r2;
-        unsigned long arm_r3;
-        unsigned long arm_r4;
-        unsigned long arm_r5;
-        unsigned long arm_r6;
-        unsigned long arm_r7;
-        unsigned long arm_r8;
-        unsigned long arm_r9;
-        unsigned long arm_r10;
-        unsigned long arm_fp;
-        unsigned long arm_ip;
-        unsigned long arm_sp;
-        unsigned long arm_lr;
-        unsigned long arm_pc;
-        unsigned long fault_address;
-};
-
-
-#endif
diff --git a/include/asm-arm26/siginfo.h b/include/asm-arm26/siginfo.h
deleted file mode 100644
index 5e21852e6039..000000000000
--- a/include/asm-arm26/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASMARM_SIGINFO_H
-#define _ASMARM_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/include/asm-arm26/signal.h b/include/asm-arm26/signal.h
deleted file mode 100644
index 967ba4947e40..000000000000
--- a/include/asm-arm26/signal.h
+++ /dev/null
@@ -1,176 +0,0 @@
-#ifndef _ASMARM_SIGNAL_H
-#define _ASMARM_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG           64
-#define _NSIG_BPW       32
-#define _NSIG_WORDS     (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;             /* at least 32 bits */
-
-typedef struct {
-        unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG            32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP           1
-#define SIGINT           2
-#define SIGQUIT          3
-#define SIGILL           4
-#define SIGTRAP          5
-#define SIGABRT          6
-#define SIGIOT           6
-#define SIGBUS           7
-#define SIGFPE           8
-#define SIGKILL          9
-#define SIGUSR1         10
-#define SIGSEGV         11
-#define SIGUSR2         12
-#define SIGPIPE         13
-#define SIGALRM         14
-#define SIGTERM         15
-#define SIGSTKFLT       16
-#define SIGCHLD         17
-#define SIGCONT         18
-#define SIGSTOP         19
-#define SIGTSTP         20
-#define SIGTTIN         21
-#define SIGTTOU         22
-#define SIGURG          23
-#define SIGXCPU         24
-#define SIGXFSZ         25
-#define SIGVTALRM       26
-#define SIGPROF         27
-#define SIGWINCH        28
-#define SIGIO           29
-#define SIGPOLL         SIGIO
-/*
-#define SIGLOST         29
-*/
-#define SIGPWR          30
-#define SIGSYS          31
-#define SIGUNUSED       31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN        32
-#define SIGRTMAX        _NSIG
-
-#define SIGSWI          32
-
-/*
- * SA_FLAGS values:
- *
- * SA_NOCLDSTOP         flag to turn off SIGCHLD when children stop.
- * SA_NOCLDWAIT         flag on SIGCHLD to inhibit zombies.
- * SA_SIGINFO           deliver the signal with SIGINFO structs
- * SA_THIRTYTWO         delivers the signal in 32-bit mode, even if the task 
- *                      is running in 26-bit.
- * SA_ONSTACK           allows alternate signal stacks (see sigaltstack(2)).
- * SA_RESTART           flag to get restarting signals (which were the default long ago)
- * SA_NODEFER           prevents the current signal from being masked in the handler.
- * SA_RESETHAND         clears the handler when the signal is delivered.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP    0x00000001
-#define SA_NOCLDWAIT    0x00000002 /* not supported yet */
-#define SA_SIGINFO      0x00000004
-#define SA_THIRTYTWO    0x02000000
-#define SA_RESTORER     0x04000000
-#define SA_ONSTACK      0x08000000
-#define SA_RESTART      0x10000000
-#define SA_NODEFER      0x40000000
-#define SA_RESETHAND    0x80000000
-
-#define SA_NOMASK       SA_NODEFER
-#define SA_ONESHOT      SA_RESETHAND
-
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK      1
-#define SS_DISABLE      2
-
-#define MINSIGSTKSZ     2048
-#define SIGSTKSZ        8192
-
-#ifdef __KERNEL__
-#define SA_IRQNOMASK            0x08000000
-#endif
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-        __sighandler_t sa_handler;
-        old_sigset_t sa_mask;
-        unsigned long sa_flags;
-        void (*sa_restorer)(void);
-};
-
-struct sigaction {
-        __sighandler_t sa_handler;
-        unsigned long sa_flags;
-        void (*sa_restorer)(void);
-        sigset_t sa_mask;               /* mask last for extensibility */
-};
-
-struct k_sigaction {
-        struct sigaction sa;
-};
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-        union {
-          __sighandler_t _sa_handler;
-          void (*_sa_sigaction)(int, struct siginfo *, void *);
-        } _u;
-        sigset_t sa_mask;
-        unsigned long sa_flags;
-        void (*sa_restorer)(void);
-};
-
-#define sa_handler      _u._sa_handler
-#define sa_sigaction    _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-        void *ss_sp;
-        int ss_flags;
-        size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#define sigmask(sig)    (1UL << ((sig) - 1))
-#endif
-
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#endif
-
-
-#endif
diff --git a/include/asm-arm26/sizes.h b/include/asm-arm26/sizes.h
deleted file mode 100644
index f8d92ca12040..000000000000
--- a/include/asm-arm26/sizes.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/*  Size defintions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h                       1
-
-/* handy sizes */
-#define SZ_1K                           0x00000400
-#define SZ_4K                           0x00001000
-#define SZ_8K                           0x00002000
-#define SZ_16K                          0x00004000
-#define SZ_64K                          0x00010000
-#define SZ_128K                         0x00020000
-#define SZ_256K                         0x00040000
-#define SZ_512K                         0x00080000
-
-#define SZ_1M                           0x00100000
-#define SZ_2M                           0x00200000
-#define SZ_4M                           0x00400000
-#define SZ_8M                           0x00800000
-#define SZ_16M                          0x01000000
-#define SZ_32M                          0x02000000
-#define SZ_64M                          0x04000000
-#define SZ_128M                         0x08000000
-#define SZ_256M                         0x10000000
-#define SZ_512M                         0x20000000
-
-#define SZ_1G                           0x40000000
-#define SZ_2G                           0x80000000
-
-#endif
-
-/*         END */
diff --git a/include/asm-arm26/smp.h b/include/asm-arm26/smp.h
deleted file mode 100644
index 38349ec8b61b..000000000000
--- a/include/asm-arm26/smp.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_SMP_H
-#define __ASM_SMP_H
-
-
-#ifdef CONFIG_SMP
-#error SMP not supported
-#endif
-
-#endif
diff --git a/include/asm-arm26/socket.h b/include/asm-arm26/socket.h
deleted file mode 100644
index 65a1a64bf934..000000000000
--- a/include/asm-arm26/socket.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _ASMARM_SOCKET_H
-#define _ASMARM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET      1
-
-#define SO_DEBUG        1
-#define SO_REUSEADDR    2
-#define SO_TYPE         3
-#define SO_ERROR        4
-#define SO_DONTROUTE    5
-#define SO_BROADCAST    6
-#define SO_SNDBUF       7
-#define SO_RCVBUF       8
-#define SO_SNDBUFFORCE  32
-#define SO_RCVBUFFORCE  33
-#define SO_KEEPALIVE    9
-#define SO_OOBINLINE    10
-#define SO_NO_CHECK     11
-#define SO_PRIORITY     12
-#define SO_LINGER       13
-#define SO_BSDCOMPAT    14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED     16
-#define SO_PEERCRED     17
-#define SO_RCVLOWAT     18
-#define SO_SNDLOWAT     19
-#define SO_RCVTIMEO     20
-#define SO_SNDTIMEO     21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION              22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT        23
-#define SO_SECURITY_ENCRYPTION_NETWORK          24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP            29
-#define SCM_TIMESTAMP           SO_TIMESTAMP
-
-#define SO_ACCEPTCONN           30
-
-#define SO_PEERSEC              31
-#define SO_PASSSEC              34
-#define SO_TIMESTAMPNS          35
-#define SCM_TIMESTAMPNS         SO_TIMESTAMPNS
-
-#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-arm26/sockios.h b/include/asm-arm26/sockios.h
deleted file mode 100644
index a2588a2512df..000000000000
--- a/include/asm-arm26/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_ARM_SOCKIOS_H
-#define __ARCH_ARM_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN       0x8901
-#define SIOCSPGRP       0x8902
-#define FIOGETOWN       0x8903
-#define SIOCGPGRP       0x8904
-#define SIOCATMARK      0x8905
-#define SIOCGSTAMP      0x8906          /* Get stamp (timeval) */
-#define SIOCGSTAMPNS    0x8907          /* Get stamp (timespec) */
-
-#endif
diff --git a/include/asm-arm26/spinlock.h b/include/asm-arm26/spinlock.h
deleted file mode 100644
index e92e81deb4fd..000000000000
--- a/include/asm-arm26/spinlock.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-
-#error ARM architecture does not support SMP spin locks
-
-#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-arm26/stat.h b/include/asm-arm26/stat.h
deleted file mode 100644
index e4abc4fa0850..000000000000
--- a/include/asm-arm26/stat.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _ASMARM_STAT_H
-#define _ASMARM_STAT_H
-
-struct __old_kernel_stat {
-        unsigned short st_dev;
-        unsigned short st_ino;
-        unsigned short st_mode;
-        unsigned short st_nlink;
-        unsigned short st_uid;
-        unsigned short st_gid;
-        unsigned short st_rdev;
-        unsigned long  st_size;
-        unsigned long  st_atime;
-        unsigned long  st_mtime;
-        unsigned long  st_ctime;
-};
-
-struct stat {
-        unsigned short st_dev;
-        unsigned short __pad1;
-        unsigned long st_ino;
-        unsigned short st_mode;
-        unsigned short st_nlink;
-        unsigned short st_uid;
-        unsigned short st_gid;
-        unsigned short st_rdev;
-        unsigned short __pad2;
-        unsigned long  st_size;
-        unsigned long  st_blksize;
-        unsigned long  st_blocks;
-        unsigned long  st_atime;
-        unsigned long  st_atime_nsec;
-        unsigned long  st_mtime;
-        unsigned long  st_mtime_nsec;
-        unsigned long  st_ctime;
-        unsigned long  st_ctime_nsec;
-        unsigned long  __unused4;
-        unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
-        unsigned long long  st_dev;
-        unsigned char   __pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO        1
-        unsigned long   __st_ino;
-        unsigned int    st_mode;
-        unsigned int    st_nlink;
-
-        unsigned long   st_uid;
-        unsigned long   st_gid;
-
-        unsigned long long  st_rdev;
-        unsigned char   __pad3[4];
-
-        long long       st_size;
-        unsigned long   st_blksize;
-
-        unsigned long   st_blocks;      /* Number 512-byte blocks allocated. */
-        unsigned long   __pad4;         /* Future possible st_blocks hi bits */
-
-        unsigned long   st_atime;
-        unsigned long   st_atime_nsec;
-
-        unsigned long   st_mtime;
-        unsigned long   st_mtime_nsec;
-
-        unsigned long   st_ctime;
-        unsigned long   st_ctime_nsec;
-
-        unsigned long long      st_ino;
-};
-
-#endif
diff --git a/include/asm-arm26/statfs.h b/include/asm-arm26/statfs.h
deleted file mode 100644
index 776dbc8f7623..000000000000
--- a/include/asm-arm26/statfs.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASMARM_STATFS_H
-#define _ASMARM_STATFS_H
-
-//FIXME - this may not be appropriate for arm26. check it out.
-
-#include <asm-generic/statfs.h>
-
-#endif
diff --git a/include/asm-arm26/string.h b/include/asm-arm26/string.h
deleted file mode 100644
index 2a8ab162412f..000000000000
--- a/include/asm-arm26/string.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef __ASM_ARM_STRING_H
-#define __ASM_ARM_STRING_H
-
-/*
- * We don't do inline string functions, since the
- * optimised inline asm versions are not small.
- */
-
-#define __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char * s, int c);
-
-#define __HAVE_ARCH_STRCHR
-extern char * strchr(const char * s, int c);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *, int, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMZERO
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void *, int, __kernel_size_t);
-
-extern void __memzero(void *ptr, __kernel_size_t n);
-
-#define memset(p,v,n)                                                   \
-        ({                                                              \
-                if ((n) != 0) {                                         \
-                        if (__builtin_constant_p((v)) && (v) == 0)      \
-                                __memzero((p),(n));                     \
-                        else                                            \
-                                memset((p),(v),(n));                    \
-                }                                                       \
-                (p);                                                    \
-        })
-
-#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); })
-
-#endif
diff --git a/include/asm-arm26/suspend.h b/include/asm-arm26/suspend.h
deleted file mode 100644
index 5e4c1cc0c19d..000000000000
--- a/include/asm-arm26/suspend.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifdef _ASMARM_SUSPEND_H
-#define _ASMARM_SUSPEND_H
-
-#endif
diff --git a/include/asm-arm26/sysirq.h b/include/asm-arm26/sysirq.h
deleted file mode 100644
index 81dca90d9a3f..000000000000
--- a/include/asm-arm26/sysirq.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-arc/irqs.h
- *
- *  Copyright (C) 1996 Russell King, Dave Gilbert
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Modifications:
- *   04-04-1998 PJB     Merged arc and a5k versions
- */
-
-
-#if defined(CONFIG_ARCH_A5K)
-#define IRQ_PRINTER             0
-#define IRQ_BATLOW              1
-#define IRQ_FLOPPYINDEX         2
-#define IRQ_FLOPPYDISK          12
-#elif defined(CONFIG_ARCH_ARC)
-#define IRQ_PRINTERBUSY         0
-#define IRQ_SERIALRING          1
-#define IRQ_PRINTERACK          2
-#define IRQ_FLOPPYCHANGED       12
-#endif
-
-#define IRQ_VSYNCPULSE          3
-#define IRQ_POWERON             4
-#define IRQ_TIMER0              5
-#define IRQ_TIMER1              6
-#define IRQ_IMMEDIATE           7
-#define IRQ_EXPCARDFIQ          8
-#define IRQ_SOUNDCHANGE         9
-#define IRQ_SERIALPORT          10
-#define IRQ_HARDDISK            11
-#define IRQ_EXPANSIONCARD       13
-#define IRQ_KEYBOARDTX          14
-#define IRQ_KEYBOARDRX          15
-
-#if defined(CONFIG_ARCH_A5K)
-#define FIQ_SERIALPORT          4
-#elif defined(CONFIG_ARCH_ARC)
-#define FIQ_FLOPPYIRQ           1
-#define FIQ_FD1772              FIQ_FLOPPYIRQ
-#endif
-
-#define FIQ_FLOPPYDATA          0
-#define FIQ_ECONET              2
-#define FIQ_EXPANSIONCARD       6
-#define FIQ_FORCE               7
-
-#define IRQ_TIMER               IRQ_TIMER0
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START               64
-
-#define irq_cannonicalize(i)    (i)
-
diff --git a/include/asm-arm26/system.h b/include/asm-arm26/system.h
deleted file mode 100644
index e09da5ff1f54..000000000000
--- a/include/asm-arm26/system.h
+++ /dev/null
@@ -1,247 +0,0 @@
-#ifndef __ASM_ARM_SYSTEM_H
-#define __ASM_ARM_SYSTEM_H
-
-#ifdef __KERNEL__
-
-
-/*
- * This is used to ensure the compiler did actually allocate the register we
- * asked it for some inline assembly sequences.  Apparently we can't trust
- * the compiler from one version to another so a bit of paranoia won't hurt.
- * This string is meant to be concatenated with the inline asm string and
- * will cause compilation to stop on mismatch. (From ARM32 - may come in handy)
- */
-#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-
-struct thread_info;
-struct task_struct;
-
-#if 0
-/* information about the system we're running on */
-extern unsigned int system_rev;
-extern unsigned int system_serial_low;
-extern unsigned int system_serial_high;
-extern unsigned int mem_fclk_21285;
-
-FIXME - sort this
-/*
- * We need to turn the caches off before calling the reset vector - RiscOS
- * messes up if we don't
- */
-#define proc_hard_reset()       cpu_proc_fin()
-
-#endif
-
-struct pt_regs;
-
-void die(const char *msg, struct pt_regs *regs, int err)
-                __attribute__((noreturn));
-
-void die_if_kernel(const char *str, struct pt_regs *regs, int err);
-
-void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
-                                       struct pt_regs *),
-                     int sig, const char *name);
-
-#include <asm/proc-fns.h>
-
-#define xchg(ptr,x) \
-        ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-extern asmlinkage void __backtrace(void);
-
-#define set_cr(x)                                       \
-        __asm__ __volatile__(                           \
-        "mcr    p15, 0, %0, c1, c0, 0   @ set CR"       \
-        : : "r" (x) : "cc")
-
-#define get_cr()                                        \
-        ({                                              \
-        unsigned int __val;                             \
-        __asm__ __volatile__(                           \
-        "mrc    p15, 0, %0, c1, c0, 0   @ get CR"       \
-        : "=r" (__val) : : "cc");                       \
-        __val;                                          \
-        })
-
-extern unsigned long cr_no_alignment;   /* defined in entry-armv.S */
-extern unsigned long cr_alignment;      /* defined in entry-armv.S */
-
-#define UDBG_UNDEFINED  (1 << 0)
-#define UDBG_SYSCALL    (1 << 1)
-#define UDBG_BADABORT   (1 << 2)
-#define UDBG_SEGV       (1 << 3)
-#define UDBG_BUS        (1 << 4)
-
-extern unsigned int user_debug;
-
-#define vectors_base()  (0)
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-#define rmb() mb()
-#define wmb() mb()
-#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
-
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value)  do { var = value; mb(); } while (0)
-
-/*
- * We assume knowledge of how
- * spin_unlock_irq() and friends are implemented.  This avoids
- * us needlessly decrementing and incrementing the preempt count.
- */
-#define prepare_arch_switch(next)       local_irq_enable()
-#define finish_arch_switch(prev)        spin_unlock(&(rq)->lock)
-
-/*
- * switch_to(prev, next) should switch from task `prev' to `next'
- * `prev' will never be the same as `next'.  schedule() itself
- * contains the memory barrier to tell GCC not to cache `current'.
- */
-extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
-
-#define switch_to(prev,next,last)                                       \
-do {                                                                    \
-        last = __switch_to(prev,task_thread_info(prev),task_thread_info(next)); \
-} while (0)
-
-/*
- * Save the current interrupt enable state & disable IRQs
- */
-#define local_irq_save(x)                               \
-        do {                                            \
-          unsigned long temp;                           \
-          __asm__ __volatile__(                         \
-"       mov     %0, pc          @ save_flags_cli\n"     \
-"       orr     %1, %0, #0x08000000\n"                  \
-"       and     %0, %0, #0x0c000000\n"                  \
-"       teqp    %1, #0\n"                               \
-          : "=r" (x), "=r" (temp)                       \
-          :                                             \
-          : "memory");                                  \
-        } while (0)
-
-/*
- * Enable IRQs  (sti)
- */
-#define local_irq_enable()                                      \
-        do {                                    \
-          unsigned long temp;                   \
-          __asm__ __volatile__(                 \
-"       mov     %0, pc          @ sti\n"        \
-"       bic     %0, %0, #0x08000000\n"          \
-"       teqp    %0, #0\n"                       \
-          : "=r" (temp)                         \
-          :                                     \
-          : "memory");                          \
-        } while(0)
-
-/*
- * Disable IRQs (cli)
- */
-#define local_irq_disable()                                     \
-        do {                                    \
-          unsigned long temp;                   \
-          __asm__ __volatile__(                 \
-"       mov     %0, pc          @ cli\n"        \
-"       orr     %0, %0, #0x08000000\n"          \
-"       teqp    %0, #0\n"                       \
-          : "=r" (temp)                         \
-          :                                     \
-          : "memory");                          \
-        } while(0)
-
-/* Enable FIQs (stf) */
-
-#define __stf() do {                            \
-        unsigned long temp;                     \
-        __asm__ __volatile__(                   \
-"       mov     %0, pc          @ stf\n"        \
-"       bic     %0, %0, #0x04000000\n"          \
-"       teqp    %0, #0\n"                       \
-        : "=r" (temp));                         \
-    } while(0)
-
-/* Disable FIQs  (clf) */
-
-#define __clf() do {                            \
-        unsigned long temp;                     \
-        __asm__ __volatile__(                   \
-"       mov     %0, pc          @ clf\n"        \
-"       orr     %0, %0, #0x04000000\n"          \
-"       teqp    %0, #0\n"                       \
-        : "=r" (temp));                         \
-    } while(0)
-
-
-/*
- * Save the current interrupt enable state.
- */
-#define local_save_flags(x)                             \
-        do {                                    \
-          __asm__ __volatile__(                 \
-"       mov     %0, pc          @ save_flags\n" \
-"       and     %0, %0, #0x0c000000\n"          \
-          : "=r" (x));                          \
-        } while (0)
-
-
-/*
- * restore saved IRQ & FIQ state
- */
-#define local_irq_restore(x)                            \
-        do {                                            \
-          unsigned long temp;                           \
-          __asm__ __volatile__(                         \
-"       mov     %0, pc          @ restore_flags\n"      \
-"       bic     %0, %0, #0x0c000000\n"                  \
-"       orr     %0, %0, %1\n"                           \
-"       teqp    %0, #0\n"                               \
-          : "=&r" (temp)                                \
-          : "r" (x)                                     \
-          : "memory");                                  \
-        } while (0)
-
-
-#ifdef CONFIG_SMP
-#error SMP not supported
-#endif
-
-#define smp_mb()                barrier()
-#define smp_rmb()               barrier()
-#define smp_wmb()               barrier()
-#define smp_read_barrier_depends()              do { } while(0)
-
-#define clf()                   __clf()
-#define stf()                   __stf()
-
-#define irqs_disabled()                 \
-({                                      \
-        unsigned long flags;            \
-        local_save_flags(flags);        \
-        flags & PSR_I_BIT;              \
-})
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
-{
-        extern void __bad_xchg(volatile void *, int);
-
-        switch (size) {
-                case 1: return cpu_xchg_1(x, ptr);
-                case 4: return cpu_xchg_4(x, ptr);
-                default: __bad_xchg(ptr, size);
-        }
-        return 0;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#define arch_align_stack(x) (x)
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/include/asm-arm26/termbits.h b/include/asm-arm26/termbits.h
deleted file mode 100644
index 48d2f5c7bcb8..000000000000
--- a/include/asm-arm26/termbits.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef __ASM_ARM_TERMBITS_H
-#define __ASM_ARM_TERMBITS_H
-
-typedef unsigned char   cc_t;
-typedef unsigned int    speed_t;
-typedef unsigned int    tcflag_t;
-
-#define NCCS 19
-struct termios {
-        tcflag_t c_iflag;               /* input mode flags */
-        tcflag_t c_oflag;               /* output mode flags */
-        tcflag_t c_cflag;               /* control mode flags */
-        tcflag_t c_lflag;               /* local mode flags */
-        cc_t c_line;                    /* line discipline */
-        cc_t c_cc[NCCS];                /* control characters */
-};
-
-struct termios2 {
-        tcflag_t c_iflag;               /* input mode flags */
-        tcflag_t c_oflag;               /* output mode flags */
-        tcflag_t c_cflag;               /* control mode flags */
-        tcflag_t c_lflag;               /* local mode flags */
-        cc_t c_line;                    /* line discipline */
-        cc_t c_cc[NCCS];                /* control characters */
-        speed_t c_ispeed;               /* input speed */
-        speed_t c_ospeed;               /* output speed */
-};
-
-struct ktermios {
-        tcflag_t c_iflag;               /* input mode flags */
-        tcflag_t c_oflag;               /* output mode flags */
-        tcflag_t c_cflag;               /* control mode flags */
-        tcflag_t c_lflag;               /* local mode flags */
-        cc_t c_line;                    /* line discipline */
-        cc_t c_cc[NCCS];                /* control characters */
-        speed_t c_ispeed;               /* input speed */
-        speed_t c_ospeed;               /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK  0000001
-#define BRKINT  0000002
-#define IGNPAR  0000004
-#define PARMRK  0000010
-#define INPCK   0000020
-#define ISTRIP  0000040
-#define INLCR   0000100
-#define IGNCR   0000200
-#define ICRNL   0000400
-#define IUCLC   0001000
-#define IXON    0002000
-#define IXANY   0004000
-#define IXOFF   0010000
-#define IMAXBEL 0020000
-#define IUTF8   0040000
-
-/* c_oflag bits */
-#define OPOST   0000001
-#define OLCUC   0000002
-#define ONLCR   0000004
-#define OCRNL   0000010
-#define ONOCR   0000020
-#define ONLRET  0000040
-#define OFILL   0000100
-#define OFDEL   0000200
-#define NLDLY   0000400
-#define   NL0   0000000
-#define   NL1   0000400
-#define CRDLY   0003000
-#define   CR0   0000000
-#define   CR1   0001000
-#define   CR2   0002000
-#define   CR3   0003000
-#define TABDLY  0014000
-#define   TAB0  0000000
-#define   TAB1  0004000
-#define   TAB2  0010000
-#define   TAB3  0014000
-#define   XTABS 0014000
-#define BSDLY   0020000
-#define   BS0   0000000
-#define   BS1   0020000
-#define VTDLY   0040000
-#define   VT0   0000000
-#define   VT1   0040000
-#define FFDLY   0100000
-#define   FF0   0000000
-#define   FF1   0100000
-
-/* c_cflag bit meaning */
-#define CBAUD   0010017
-#define  B0     0000000         /* hang up */
-#define  B50    0000001
-#define  B75    0000002
-#define  B110   0000003
-#define  B134   0000004
-#define  B150   0000005
-#define  B200   0000006
-#define  B300   0000007
-#define  B600   0000010
-#define  B1200  0000011
-#define  B1800  0000012
-#define  B2400  0000013
-#define  B4800  0000014
-#define  B9600  0000015
-#define  B19200 0000016
-#define  B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE   0000060
-#define   CS5   0000000
-#define   CS6   0000020
-#define   CS7   0000040
-#define   CS8   0000060
-#define CSTOPB  0000100
-#define CREAD   0000200
-#define PARENB  0000400
-#define PARODD  0001000
-#define HUPCL   0002000
-#define CLOCAL  0004000
-#define CBAUDEX 0010000
-#define   BOTHER  0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD    002003600000          /* input baud rate */
-#define CMSPAR    010000000000          /* mark or space (stick) parity */
-#define CRTSCTS   020000000000          /* flow control */
-
-#define IBSHIFT   16            /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG    0000001
-#define ICANON  0000002
-#define XCASE   0000004
-#define ECHO    0000010
-#define ECHOE   0000020
-#define ECHOK   0000040
-#define ECHONL  0000100
-#define NOFLSH  0000200
-#define TOSTOP  0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE  0004000
-#define FLUSHO  0010000
-#define PENDIN  0040000
-#define IEXTEN  0100000
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF          0
-#define TCOON           1
-#define TCIOFF          2
-#define TCION           3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH        0
-#define TCOFLUSH        1
-#define TCIOFLUSH       2
-
-/* tcsetattr uses these */
-#define TCSANOW         0
-#define TCSADRAIN       1
-#define TCSAFLUSH       2
-
-#endif  /* __ASM_ARM_TERMBITS_H */
diff --git a/include/asm-arm26/termios.h b/include/asm-arm26/termios.h
deleted file mode 100644
index 293e3f1bc3f2..000000000000
--- a/include/asm-arm26/termios.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef __ASM_ARM_TERMIOS_H
-#define __ASM_ARM_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-        unsigned short ws_row;
-        unsigned short ws_col;
-        unsigned short ws_xpixel;
-        unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-        unsigned short c_iflag;         /* input mode flags */
-        unsigned short c_oflag;         /* output mode flags */
-        unsigned short c_cflag;         /* control mode flags */
-        unsigned short c_lflag;         /* local mode flags */
-        unsigned char c_line;           /* line discipline */
-        unsigned char c_cc[NCC];        /* control characters */
-};
-
-#ifdef __KERNEL__
-/*      intr=^C         quit=^|         erase=del       kill=^U
-        eof=^D          vtime=\0        vmin=\1         sxtc=\0
-        start=^Q        stop=^S         susp=^Z         eol=\0
-        reprint=^R      discard=^U      werase=^W       lnext=^V
-        eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE        0x001
-#define TIOCM_DTR       0x002
-#define TIOCM_RTS       0x004
-#define TIOCM_ST        0x008
-#define TIOCM_SR        0x010
-#define TIOCM_CTS       0x020
-#define TIOCM_CAR       0x040
-#define TIOCM_RNG       0x080
-#define TIOCM_DSR       0x100
-#define TIOCM_CD        TIOCM_CAR
-#define TIOCM_RI        TIOCM_RNG
-#define TIOCM_OUT1      0x2000
-#define TIOCM_OUT2      0x4000
-#define TIOCM_LOOP      0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) {              \
-        unsigned short __tmp;                                   \
-        get_user(__tmp,&(termio)->x);                           \
-        *(unsigned short *) &(termios)->x = __tmp;              \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-        SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-        SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-        SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-        SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-        copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-        put_user((termios)->c_iflag, &(termio)->c_iflag); \
-        put_user((termios)->c_oflag, &(termio)->c_oflag); \
-        put_user((termios)->c_cflag, &(termio)->c_cflag); \
-        put_user((termios)->c_lflag, &(termio)->c_lflag); \
-        put_user((termios)->c_line,  &(termio)->c_line); \
-        copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif  /* __KERNEL__ */
-
-#endif  /* __ASM_ARM_TERMIOS_H */
diff --git a/include/asm-arm26/thread_info.h b/include/asm-arm26/thread_info.h
deleted file mode 100644
index f9b5c09b560f..000000000000
--- a/include/asm-arm26/thread_info.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- *  linux/include/asm-arm26/thread_info.h
- *
- *  Copyright (C) 2002 Russell King.
- *  Copyright (C) 2003 Ian Molton.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_THREAD_INFO_H
-#define __ASM_ARM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-struct task_struct;
-struct exec_domain;
-
-#include <linux/compiler.h>
-#include <asm/fpstate.h>
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-typedef unsigned long mm_segment_t;
-
-struct cpu_context_save {
-        __u32   r4;
-        __u32   r5;
-        __u32   r6;
-        __u32   r7;
-        __u32   r8;
-        __u32   r9;
-        __u32   sl;
-        __u32   fp;
-        __u32   sp;
-        __u32   pc;
-};
-
-/*
- * low level task data that entry.S needs immediate access to.
- * We assume cpu_context follows immedately after cpu_domain.
- */
-struct thread_info {
-        unsigned long           flags;          /* low level flags */
-        int                     preempt_count;  /* 0 => preemptable, <0 => bug */
-        mm_segment_t            addr_limit;     /* address limit */
-        struct task_struct      *task;          /* main task structure */
-        struct exec_domain      *exec_domain;   /* execution domain */
-        __u32                   cpu;            /* cpu */
-        struct cpu_context_save cpu_context;    /* cpu context */
-        struct restart_block    restart_block;
-        union fp_state          fpstate;
-};
-
-#define INIT_THREAD_INFO(tsk)                   \
-{                                               \
-        .task           &tsk,                   \
-        .exec_domain    &default_exec_domain,   \
-        .flags          0,                      \
-        .preempt_count  0,                      \
-        .addr_limit     KERNEL_DS,              \
-        .restart_block  = {                             \
-                .fn     = do_no_restart_syscall,        \
-        },                                              \
-}
-
-#define init_thread_info        (init_thread_union.thread_info)
-#define init_stack              (init_thread_union.stack)
-
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-static inline struct thread_info *current_thread_info(void)
-{
-        register unsigned long sp asm ("sp");
-        return (struct thread_info *)(sp & ~0x1fff);
-}
-
-#define THREAD_SIZE     PAGE_SIZE
-#define task_pt_regs(task) ((struct pt_regs *)(task_stack_page(task) + THREAD_SIZE - 8) - 1)
-
-extern struct thread_info *alloc_thread_info(struct task_struct *task);
-extern void free_thread_info(struct thread_info *);
-
-#define thread_saved_pc(tsk)    \
-        ((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
-#define thread_saved_fp(tsk)    \
-        ((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
-
-#else /* !__ASSEMBLY__ */
-
-#define TI_FLAGS        0
-#define TI_PREEMPT      4
-#define TI_ADDR_LIMIT   8
-#define TI_TASK         12
-#define TI_EXEC_DOMAIN  16
-#define TI_CPU          20
-#define TI_CPU_SAVE     24
-#define TI_RESTART_BLOCK 28
-#define TI_FPSTATE      68
-
-#endif
-
-#define PREEMPT_ACTIVE  0x04000000
-
-/*
- * thread information flags:
- *  TIF_SYSCALL_TRACE   - syscall trace active
- *  TIF_SIGPENDING      - signal pending
- *  TIF_NEED_RESCHED    - rescheduling necessary
- *  TIF_USEDFPU         - FPU was used by this task this quantum (SMP)
- *  TIF_POLLING_NRFLAG  - true if poll_idle() is polling TIF_NEED_RESCHED
- */
-#define TIF_SIGPENDING          0
-#define TIF_NEED_RESCHED        1
-#define TIF_SYSCALL_TRACE       8
-#define TIF_USED_FPU            16
-#define TIF_POLLING_NRFLAG      17
-#define TIF_MEMDIE              18
-
-#define _TIF_SIGPENDING         (1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED       (1 << TIF_NEED_RESCHED)
-#define _TIF_SYSCALL_TRACE      (1 << TIF_SYSCALL_TRACE)
-#define _TIF_USED_FPU           (1 << TIF_USED_FPU)
-#define _TIF_POLLING_NRFLAG     (1 << TIF_POLLING_NRFLAG)
-
-/*
- * Change these and you break ASM code in entry-common.S
- */
-#define _TIF_WORK_MASK          0x000000ff
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/include/asm-arm26/timex.h b/include/asm-arm26/timex.h
deleted file mode 100644
index 68322fbc1aed..000000000000
--- a/include/asm-arm26/timex.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  linux/include/asm-arm/timex.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Architecture Specific TIME specifications
- */
-#ifndef _ASMARM_TIMEX_H
-#define _ASMARM_TIMEX_H
-
-/*
- * On the RiscPC, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE         2000000
-
-/* IS THAT RIGHT ON A5000? FIXME */
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles (void)
-{
-        return 0;
-}
-
-#endif
diff --git a/include/asm-arm26/tlb.h b/include/asm-arm26/tlb.h
deleted file mode 100644
index 08ddd85b8d35..000000000000
--- a/include/asm-arm26/tlb.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef __ASMARM_TLB_H
-#define __ASMARM_TLB_H
-
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-
-/*
- * TLB handling.  This allows us to remove pages from the page
- * tables, and efficiently handle the TLB issues.
- */
-struct mmu_gather {
-        struct mm_struct        *mm;
-        unsigned int            need_flush;
-        unsigned int            fullmm;
-};
-
-DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-static inline struct mmu_gather *
-tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
-{
-        struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
-
-        tlb->mm = mm;
-        tlb->need_flush = 0;
-        tlb->fullmm = full_mm_flush;
-
-        return tlb;
-}
-
-static inline void
-tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
-{
-        if (tlb->need_flush)
-                flush_tlb_mm(tlb->mm);
-
-        /* keep the page table cache within bounds */
-        check_pgt_cache();
-
-        put_cpu_var(mmu_gathers);
-}
-
-#define tlb_remove_tlb_entry(tlb,ptep,address)  do { } while (0)
-//#define tlb_start_vma(tlb,vma)                  do { } while (0)
-//FIXME - ARM32 uses this now that things changed in the kernel. seems like it may be pointless on arm26, however to get things compiling...
-#define tlb_start_vma(tlb,vma)                                          \
-        do {                                                            \
-                if (!tlb->fullmm)                                       \
-                        flush_cache_range(vma, vma->vm_start, vma->vm_end); \
-        } while (0)
-#define tlb_end_vma(tlb,vma)                    do { } while (0)
-
-static inline void
-tlb_remove_page(struct mmu_gather *tlb, struct page *page)
-{
-        tlb->need_flush = 1;
-        free_page_and_swap_cache(page);
-}
-
-#define pte_free_tlb(tlb,ptep)          pte_free(ptep)
-#define pmd_free_tlb(tlb,pmdp)          pmd_free(pmdp)
-
-#endif
diff --git a/include/asm-arm26/tlbflush.h b/include/asm-arm26/tlbflush.h
deleted file mode 100644
index f79c1cbf4f69..000000000000
--- a/include/asm-arm26/tlbflush.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __ASMARM_TLBFLUSH_H
-#define __ASMARM_TLBFLUSH_H
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_all() flushes all processes TLBs
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- */
-
-#define flush_tlb_all()                         memc_update_all()
-#define flush_tlb_mm(mm)                        memc_update_mm(mm)
-#define flush_tlb_page(vma, vmaddr)             do { printk("flush_tlb_page\n");} while (0)  // IS THIS RIGHT?
-#define flush_tlb_range(vma,start,end)          \
-                do { memc_update_mm(vma->vm_mm); (void)(start); (void)(end); } while (0)
-#define flush_tlb_pgtables(mm,start,end)        do { printk("flush_tlb_pgtables\n");} while (0)
-#define flush_tlb_kernel_range(s,e)             do { printk("flush_tlb_range\n");} while (0)
-
-/*
- * The following handle the weird MEMC chip
- */
-static inline void memc_update_all(void)
-{
-        struct task_struct *p;
-        cpu_memc_update_all(init_mm.pgd);
-        for_each_process(p) {
-                if (!p->mm)
-                        continue;
-                cpu_memc_update_all(p->mm->pgd);
-        }
-        processor._set_pgd(current->active_mm->pgd);
-}
-
-static inline void memc_update_mm(struct mm_struct *mm)
-{
-        cpu_memc_update_all(mm->pgd);
-
-        if (mm == current->active_mm)
-                processor._set_pgd(mm->pgd);
-}
-
-static inline void
-memc_clear(struct mm_struct *mm, struct page *page)
-{
-        cpu_memc_update_entry(mm->pgd, (unsigned long) page_address(page), 0);
-
-        if (mm == current->active_mm)
-                processor._set_pgd(mm->pgd);
-}
-
-static inline void
-memc_update_addr(struct mm_struct *mm, pte_t pte, unsigned long vaddr)
-{
-        cpu_memc_update_entry(mm->pgd, pte_val(pte), vaddr);
-
-        if (mm == current->active_mm)
-                processor._set_pgd(mm->pgd);
-}
-
-static inline void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
-        struct mm_struct *mm = vma->vm_mm;
-printk("update_mmu_cache\n");
-        memc_update_addr(mm, pte, addr);
-}
-
-#endif
diff --git a/include/asm-arm26/topology.h b/include/asm-arm26/topology.h
deleted file mode 100644
index accbd7cad9b5..000000000000
--- a/include/asm-arm26/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_ARM_TOPOLOGY_H
-#define _ASM_ARM_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/include/asm-arm26/types.h b/include/asm-arm26/types.h
deleted file mode 100644
index 81bd357ada02..000000000000
--- a/include/asm-arm26/types.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __ASM_ARM_TYPES_H
-#define __ASM_ARM_TYPES_H
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-typedef u32 dma64_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/include/asm-arm26/uaccess-asm.h b/include/asm-arm26/uaccess-asm.h
deleted file mode 100644
index ade76ec02995..000000000000
--- a/include/asm-arm26/uaccess-asm.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *  linux/include/asm-arm/proc-armo/uaccess.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * The fs functions are implemented on the ARM2 and ARM3 architectures
- * manually.
- * Use *_user functions to access user memory with faulting behaving
- *   as though the user is accessing the memory.
- * Use set_fs(get_ds()) and then the *_user functions to allow them to
- *   access kernel memory.
- */
-
-/*
- * These are the values used to represent the user `fs' and the kernel `ds'
- * FIXME - the KERNEL_DS should end at 0x03000000 but we want to access ROM at
- * 0x03400000. ideally we want to forbid access to the IO space inbetween.
- */
-#define KERNEL_DS       0x03FFFFFF
-#define USER_DS         0x02000000
-
-extern uaccess_t uaccess_user, uaccess_kernel;
-
-static inline void set_fs (mm_segment_t fs)
-{
-        current_thread_info()->addr_limit = fs;
-        current->thread.uaccess = (fs == USER_DS ? &uaccess_user : &uaccess_kernel);
-}
-
-#define __range_ok(addr,size) ({                                        \
-        unsigned long flag, roksum;                                     \
-        __asm__ __volatile__("subs %1, %0, %3; cmpcs %1, %2; movcs %0, #0" \
-                : "=&r" (flag), "=&r" (roksum)                          \
-                : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit)      \
-                : "cc");                                                \
-        flag; })
-
-#define __addr_ok(addr) ({                                              \
-        unsigned long flag;                                             \
-        __asm__ __volatile__("cmp %2, %0; movlo %0, #0"                 \
-                : "=&r" (flag)                                          \
-                : "0" (current_thread_info()->addr_limit), "r" (addr)   \
-                : "cc");                                                \
-        (flag == 0); })
-
-#define __put_user_asm_byte(x,addr,err)                                 \
-        __asm__ __volatile__(                                           \
-        "       mov     r0, %1\n"                                       \
-        "       mov     r1, %2\n"                                       \
-        "       mov     r2, %0\n"                                       \
-        "       mov     lr, pc\n"                                       \
-        "       mov     pc, %3\n"                                       \
-        "       mov     %0, r2\n"                                       \
-        : "=r" (err)                                                    \
-        : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_byte), \
-          "0" (err)                                                     \
-        : "r0", "r1", "r2", "lr")
-
-#define __put_user_asm_half(x,addr,err)                                 \
-        __asm__ __volatile__(                                           \
-        "       mov     r0, %1\n"                                       \
-        "       mov     r1, %2\n"                                       \
-        "       mov     r2, %0\n"                                       \
-        "       mov     lr, pc\n"                                       \
-        "       mov     pc, %3\n"                                       \
-        "       mov     %0, r2\n"                                       \
-        : "=r" (err)                                                    \
-        : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_half), \
-          "0" (err)                                                     \
-        : "r0", "r1", "r2", "lr")
-
-#define __put_user_asm_word(x,addr,err)                                 \
-        __asm__ __volatile__(                                           \
-        "       mov     r0, %1\n"                                       \
-        "       mov     r1, %2\n"                                       \
-        "       mov     r2, %0\n"                                       \
-        "       mov     lr, pc\n"                                       \
-        "       mov     pc, %3\n"                                       \
-        "       mov     %0, r2\n"                                       \
-        : "=r" (err)                                                    \
-        : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_word), \
-          "0" (err)                                                     \
-        : "r0", "r1", "r2", "lr")
-
-#define __put_user_asm_dword(x,addr,err)                                 \
-        __asm__ __volatile__(                                           \
-        "       mov     r0, %1\n"                                       \
-        "       mov     r1, %2\n"                                       \
-        "       mov     r2, %0\n"                                       \
-        "       mov     lr, pc\n"                                       \
-        "       mov     pc, %3\n"                                       \
-        "       mov     %0, r2\n"                                       \
-        : "=r" (err)                                                    \
-        : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_dword), \
-          "0" (err)                                                     \
-        : "r0", "r1", "r2", "lr")
-
-#define __get_user_asm_byte(x,addr,err)                                 \
-        __asm__ __volatile__(                                           \
-        "       mov     r0, %2\n"                                       \
-        "       mov     r1, %0\n"                                       \
-        "       mov     lr, pc\n"                                       \
-        "       mov     pc, %3\n"                                       \
-        "       mov     %0, r1\n"                                       \
-        "       mov     %1, r0\n"                                       \
-        : "=r" (err), "=r" (x)                                          \
-        : "r" (addr), "r" (current->thread.uaccess->get_byte), "0" (err)        \
-        : "r0", "r1", "r2", "lr")
-
-#define __get_user_asm_half(x,addr,err)                                 \
-        __asm__ __volatile__(                                           \
-        "       mov     r0, %2\n"                                       \
-        "       mov     r1, %0\n"                                       \
-        "       mov     lr, pc\n"                                       \
-        "       mov     pc, %3\n"                                       \
-        "       mov     %0, r1\n"                                       \
-        "       mov     %1, r0\n"                                       \
-        : "=r" (err), "=r" (x)                                          \
-        : "r" (addr), "r" (current->thread.uaccess->get_half), "0" (err)        \
-        : "r0", "r1", "r2", "lr")
-
-#define __get_user_asm_word(x,addr,err)                                 \
-        __asm__ __volatile__(                                           \
-        "       mov     r0, %2\n"                                       \
-        "       mov     r1, %0\n"                                       \
-        "       mov     lr, pc\n"                                       \
-        "       mov     pc, %3\n"                                       \
-        "       mov     %0, r1\n"                                       \
-        "       mov     %1, r0\n"                                       \
-        : "=r" (err), "=r" (x)                                          \
-        : "r" (addr), "r" (current->thread.uaccess->get_word), "0" (err)        \
-        : "r0", "r1", "r2", "lr")
-
-#define __do_copy_from_user(to,from,n)                                  \
-        (n) = current->thread.uaccess->copy_from_user((to),(from),(n))
-
-#define __do_copy_to_user(to,from,n)                                    \
-        (n) = current->thread.uaccess->copy_to_user((to),(from),(n))
-
-#define __do_clear_user(addr,sz)                                        \
-        (sz) = current->thread.uaccess->clear_user((addr),(sz))
-
-#define __do_strncpy_from_user(dst,src,count,res)                       \
-        (res) = current->thread.uaccess->strncpy_from_user(dst,src,count)
-
-#define __do_strnlen_user(s,n,res)                                      \
-        (res) = current->thread.uaccess->strnlen_user(s,n)
diff --git a/include/asm-arm26/uaccess.h b/include/asm-arm26/uaccess.h
deleted file mode 100644
index d64ed84cb2d3..000000000000
--- a/include/asm-arm26/uaccess.h
+++ /dev/null
@@ -1,293 +0,0 @@
-#ifndef _ASMARM_UACCESS_H
-#define _ASMARM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <asm/errno.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-        unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-extern int fixup_exception(struct pt_regs *regs);
-
-#define get_ds()        (KERNEL_DS)
-#define get_fs()        (current_thread_info()->addr_limit)
-#define segment_eq(a,b) ((a) == (b))
-
-#include <asm/uaccess-asm.h>
-
-#define access_ok(type,addr,size)       (__range_ok(addr,size) == 0)
-
-/*
- * Single-value transfer routines.  They automatically use the right
- * size if we just have the right pointer type.  Note that the functions
- * which read from user space (*get_*) need to take care not to leak
- * kernel data even if the calling code is buggy and fails to check
- * the return value.  This means zeroing out the destination variable
- * or buffer on error.  Normally this is done out of line by the
- * fixup code, but there are a few places where it intrudes on the
- * main code path.  When we only write to user space, there is no
- * problem.
- *
- * The "__xxx" versions of the user access functions do not verify the
- * address space - it must have been done previously with a separate
- * "access_ok()" call.
- *
- * The "xxx_error" versions set the third argument to EFAULT if an
- * error occurs, and leave it unchanged on success.  Note that these
- * versions are void (ie, don't return a value as such).
- */
-
-extern int __get_user_1(void *);
-extern int __get_user_2(void *);
-extern int __get_user_4(void *);
-extern int __get_user_8(void *);
-extern int __get_user_bad(void);
-
-#define __get_user_x(__r1,__p,__e,__s,__i...)                           \
-           __asm__ __volatile__ ("bl    __get_user_" #__s               \
-                : "=&r" (__e), "=r" (__r1)                              \
-                : "0" (__p)                                             \
-                : __i)
-
-#define get_user(x,p)                                                   \
-        ({                                                              \
-                register const typeof(*(p)) *__p asm("r0") = (p);       \
-                register typeof(*(p)) __r1 asm("r1");                   \
-                register int __e asm("r0");                             \
-                switch (sizeof(*(p))) {                                 \
-                case 1:                                                 \
-                        __get_user_x(__r1, __p, __e, 1, "lr");          \
-                        break;                                          \
-                case 2:                                                 \
-                        __get_user_x(__r1, __p, __e, 2, "r2", "lr");    \
-                        break;                                          \
-                case 4:                                                 \
-                        __get_user_x(__r1, __p, __e, 4, "lr");          \
-                        break;                                          \
-                case 8:                                                 \
-                        __get_user_x(__r1, __p, __e, 8, "lr");          \
-                        break;                                          \
-                default: __e = __get_user_bad(); break;                 \
-                }                                                       \
-                x = __r1;                                               \
-                __e;                                                    \
-        })
-
-
-#define __get_user(x,ptr)                                               \
-({                                                                      \
-        long __gu_err = 0;                                              \
-        __get_user_err((x),(ptr),__gu_err);                             \
-        __gu_err;                                                       \
-})
-
-#define __get_user_error(x,ptr,err)                                     \
-({                                                                      \
-        __get_user_err((x),(ptr),err);                                  \
-        (void) 0;                                                       \
-})
-
-#define __get_user_err(x,ptr,err)                                       \
-do {                                                                    \
-        unsigned long __gu_addr = (unsigned long)(ptr);                 \
-        unsigned long __gu_val;                                         \
-        switch (sizeof(*(ptr))) {                                       \
-        case 1: __get_user_asm_byte(__gu_val,__gu_addr,err);    break;  \
-        case 2: __get_user_asm_half(__gu_val,__gu_addr,err);    break;  \
-        case 4: __get_user_asm_word(__gu_val,__gu_addr,err);    break;  \
-        default: (__gu_val) = __get_user_bad();                         \
-        }                                                               \
-        (x) = (__typeof__(*(ptr)))__gu_val;                             \
-} while (0)
-
-extern int __put_user_1(void *, unsigned int);
-extern int __put_user_2(void *, unsigned int);
-extern int __put_user_4(void *, unsigned int);
-extern int __put_user_8(void *, unsigned long long);
-extern int __put_user_bad(void);
-
-#define __put_user_x(__r1,__p,__e,__s)                                  \
-           __asm__ __volatile__ (                                       \
-                __asmeq("%0", "r0") __asmeq("%2", "r1")                 \
-                "bl     __put_user_" #__s                               \
-                : "=&r" (__e)                                           \
-                : "0" (__p), "r" (__r1)                                 \
-                : "ip", "lr", "cc")
-
-#define put_user(x,p)                                                   \
-        ({                                                              \
-                register const typeof(*(p)) __r1 asm("r1") = (x);       \
-                register const typeof(*(p)) *__p asm("r0") = (p);       \
-                register int __e asm("r0");                             \
-                switch (sizeof(*(__p))) {                               \
-                case 1:                                                 \
-                        __put_user_x(__r1, __p, __e, 1);                \
-                        break;                                          \
-                case 2:                                                 \
-                        __put_user_x(__r1, __p, __e, 2);                \
-                        break;                                          \
-                case 4:                                                 \
-                        __put_user_x(__r1, __p, __e, 4);                \
-                        break;                                          \
-                case 8:                                                 \
-                        __put_user_x(__r1, __p, __e, 8);                \
-                        break;                                          \
-                default: __e = __put_user_bad(); break;                 \
-                }                                                       \
-                __e;                                                    \
-        })
-
-#if 0
-/*********************   OLD METHOD *******************/
-#define __put_user_x(__r1,__p,__e,__s,__i...)                           \
-           __asm__ __volatile__ ("bl    __put_user_" #__s               \
-                : "=&r" (__e)                                           \
-                : "0" (__p), "r" (__r1)                                 \
-                : __i)
-
-#define put_user(x,p)                                                   \
-        ({                                                              \
-                register const typeof(*(p)) __r1 asm("r1") = (x);       \
-                register const typeof(*(p)) *__p asm("r0") = (p);       \
-                register int __e asm("r0");                             \
-                switch (sizeof(*(p))) {                                 \
-                case 1:                                                 \
-                        __put_user_x(__r1, __p, __e, 1, "r2", "lr");    \
-                        break;                                          \
-                case 2:                                                 \
-                        __put_user_x(__r1, __p, __e, 2, "r2", "lr");    \
-                        break;                                          \
-                case 4:                                                 \
-                        __put_user_x(__r1, __p, __e, 4, "r2", "lr");    \
-                        break;                                          \
-                case 8:                                                 \
-                        __put_user_x(__r1, __p, __e, 8, "r2", "ip", "lr");      \
-                        break;                                          \
-                default: __e = __put_user_bad(); break;                 \
-                }                                                       \
-                __e;                                                    \
-        })
-/*************************************************/
-#endif
-
-#define __put_user(x,ptr)                                               \
-({                                                                      \
-        long __pu_err = 0;                                              \
-        __put_user_err((x),(ptr),__pu_err);                             \
-        __pu_err;                                                       \
-})
-
-#define __put_user_error(x,ptr,err)                                     \
-({                                                                      \
-        __put_user_err((x),(ptr),err);                                  \
-        (void) 0;                                                       \
-})
-
-#define __put_user_err(x,ptr,err)                                       \
-do {                                                                    \
-        unsigned long __pu_addr = (unsigned long)(ptr);                 \
-        __typeof__(*(ptr)) __pu_val = (x);                              \
-        switch (sizeof(*(ptr))) {                                       \
-        case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);    break;  \
-        case 2: __put_user_asm_half(__pu_val,__pu_addr,err);    break;  \
-        case 4: __put_user_asm_word(__pu_val,__pu_addr,err);    break;  \
-        case 8: __put_user_asm_dword(__pu_val,__pu_addr,err);   break;  \
-        default: __put_user_bad();                                      \
-        }                                                               \
-} while (0)
-
-static __inline__ unsigned long copy_from_user(void *to, const void *from, unsigned long n)
-{
-        if (access_ok(VERIFY_READ, from, n))
-                __do_copy_from_user(to, from, n);
-        else /* security hole - plug it */
-                memzero(to, n);
-        return n;
-}
-
-static __inline__ unsigned long __copy_from_user(void *to, const void *from, unsigned long n)
-{
-        __do_copy_from_user(to, from, n);
-        return n;
-}
-
-static __inline__ unsigned long copy_to_user(void *to, const void *from, unsigned long n)
-{
-        if (access_ok(VERIFY_WRITE, to, n))
-                __do_copy_to_user(to, from, n);
-        return n;
-}
-
-static __inline__ unsigned long __copy_to_user(void *to, const void *from, unsigned long n)
-{
-        __do_copy_to_user(to, from, n);
-        return n;
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-static __inline__ unsigned long clear_user (void *to, unsigned long n)
-{
-        if (access_ok(VERIFY_WRITE, to, n))
-                __do_clear_user(to, n);
-        return n;
-}
-
-static __inline__ unsigned long __clear_user (void *to, unsigned long n)
-{
-        __do_clear_user(to, n);
-        return n;
-}
-
-static __inline__ long strncpy_from_user (char *dst, const char *src, long count)
-{
-        long res = -EFAULT;
-        if (access_ok(VERIFY_READ, src, 1))
-                __do_strncpy_from_user(dst, src, count, res);
-        return res;
-}
-
-static __inline__ long __strncpy_from_user (char *dst, const char *src, long count)
-{
-        long res;
-        __do_strncpy_from_user(dst, src, count, res);
-        return res;
-}
-
-#define strlen_user(s)  strnlen_user(s, ~0UL >> 1)
-
-static inline long strnlen_user(const char *s, long n)
-{
-        unsigned long res = 0;
-
-        if (__addr_ok(s))
-                __do_strnlen_user(s, n, res);
-
-        return res;
-}
-
-#endif /* _ASMARM_UACCESS_H */
diff --git a/include/asm-arm26/ucontext.h b/include/asm-arm26/ucontext.h
deleted file mode 100644
index f853130137cc..000000000000
--- a/include/asm-arm26/ucontext.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASMARM_UCONTEXT_H
-#define _ASMARM_UCONTEXT_H
-
-struct ucontext {
-        unsigned long     uc_flags;
-        struct ucontext  *uc_link;
-        stack_t           uc_stack;
-        struct sigcontext uc_mcontext;
-        sigset_t          uc_sigmask;   /* mask last for extensibility */
-};
-
-#endif /* !_ASMARM_UCONTEXT_H */
diff --git a/include/asm-arm26/unaligned.h b/include/asm-arm26/unaligned.h
deleted file mode 100644
index d992782089fd..000000000000
--- a/include/asm-arm26/unaligned.h
+++ /dev/null
@@ -1,118 +0,0 @@
-#ifndef __ASM_ARM_UNALIGNED_H
-#define __ASM_ARM_UNALIGNED_H
-
-#include <asm/types.h>
-
-extern int __bug_unaligned_x(void *ptr);
-
-/*
- * What is the most efficient way of loading/storing an unaligned value?
- *
- * That is the subject of this file.  Efficiency here is defined as
- * minimum code size with minimum register usage for the common cases.
- * It is currently not believed that long longs are common, so we
- * trade efficiency for the chars, shorts and longs against the long
- * longs.
- *
- * Current stats with gcc 2.7.2.2 for these functions:
- *
- *      ptrsize get:    code    regs    put:    code    regs
- *      1               1       1               1       2
- *      2               3       2               3       2
- *      4               7       3               7       3
- *      8               20      6               16      6
- *
- * gcc 2.95.1 seems to code differently:
- *
- *      ptrsize get:    code    regs    put:    code    regs
- *      1               1       1               1       2
- *      2               3       2               3       2
- *      4               7       4               7       4
- *      8               19      8               15      6
- *
- * which may or may not be more efficient (depending upon whether
- * you can afford the extra registers).  Hopefully the gcc 2.95
- * is inteligent enough to decide if it is better to use the
- * extra register, but evidence so far seems to suggest otherwise.
- *
- * Unfortunately, gcc is not able to optimise the high word
- * out of long long >> 32, or the low word from long long << 32
- */
-
-#define __get_unaligned_2_le(__p)                                       \
-        (__p[0] | __p[1] << 8)
-
-#define __get_unaligned_4_le(__p)                                       \
-        (__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
-
-#define __get_unaligned_le(ptr)                                 \
-        ({                                                      \
-                __typeof__(*(ptr)) __v;                         \
-                __u8 *__p = (__u8 *)(ptr);                      \
-                switch (sizeof(*(ptr))) {                       \
-                case 1: __v = *(ptr);                   break;  \
-                case 2: __v = __get_unaligned_2_le(__p);        break;  \
-                case 4: __v = __get_unaligned_4_le(__p);        break;  \
-                case 8: {                                       \
-                                unsigned int __v1, __v2;        \
-                                __v2 = __get_unaligned_4_le((__p+4)); \
-                                __v1 = __get_unaligned_4_le(__p);       \
-                                __v = ((unsigned long long)__v2 << 32 | __v1);  \
-                        }                                       \
-                        break;                                  \
-                default: __v = __bug_unaligned_x(__p);  break;  \
-                }                                               \
-                __v;                                            \
-        })
-
-static inline void __put_unaligned_2_le(__u32 __v, register __u8 *__p)
-{
-        *__p++ = __v;
-        *__p++ = __v >> 8;
-}
-
-static inline void __put_unaligned_4_le(__u32 __v, register __u8 *__p)
-{
-        __put_unaligned_2_le(__v >> 16, __p + 2);
-        __put_unaligned_2_le(__v, __p);
-}
-
-static inline void __put_unaligned_8_le(const unsigned long long __v, register __u8 *__p)
-{
-        /*
-         * tradeoff: 8 bytes of stack for all unaligned puts (2
-         * instructions), or an extra register in the long long
-         * case - go for the extra register.
-         */
-        __put_unaligned_4_le(__v >> 32, __p+4);
-        __put_unaligned_4_le(__v, __p);
-}
-
-/*
- * Try to store an unaligned value as efficiently as possible.
- */
-#define __put_unaligned_le(val,ptr)                                     \
-        ({                                                      \
-                switch (sizeof(*(ptr))) {                       \
-                case 1:                                         \
-                        *(ptr) = (val);                         \
-                        break;                                  \
-                case 2: __put_unaligned_2_le((val),(__u8 *)(ptr));      \
-                        break;                                  \
-                case 4: __put_unaligned_4_le((val),(__u8 *)(ptr));      \
-                        break;                                  \
-                case 8: __put_unaligned_8_le((val),(__u8 *)(ptr)); \
-                        break;                                  \
-                default: __bug_unaligned_x(ptr);                \
-                        break;                                  \
-                }                                               \
-                (void) 0;                                       \
-        })
-
-/*
- * Select endianness
- */
-#define get_unaligned   __get_unaligned_le
-#define put_unaligned   __put_unaligned_le
-
-#endif
diff --git a/include/asm-arm26/uncompress.h b/include/asm-arm26/uncompress.h
deleted file mode 100644
index df2cba816a4e..000000000000
--- a/include/asm-arm26/uncompress.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-arc/uncompress.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VIDMEM ((char *)0x02000000)
- 
-int video_num_columns, video_num_lines, video_size_row;
-int white, bytes_per_char_h;
-extern unsigned long con_charconvtable[256];
-
-struct param_struct {
-        unsigned long page_size;
-        unsigned long nr_pages;
-        unsigned long ramdisk_size;
-        unsigned long mountrootrdonly;
-        unsigned long rootdev;
-        unsigned long video_num_cols;
-        unsigned long video_num_rows;
-        unsigned long video_x;
-        unsigned long video_y;
-        unsigned long memc_control_reg;
-        unsigned char sounddefault;
-        unsigned char adfsdrives;
-        unsigned char bytes_per_char_h;
-        unsigned char bytes_per_char_v;
-        unsigned long unused[256/4-11];
-};
-
-static struct param_struct *params = (struct param_struct *)0x0207c000;
- 
-/*
- * This does not append a newline
- */
-static void puts(const char *s)
-{
-        extern void ll_write_char(char *, unsigned long);
-        int x,y;
-        unsigned char c;
-        char *ptr;
-
-        x = params->video_x;
-        y = params->video_y;
-
-        while ( ( c = *(unsigned char *)s++ ) != '\0' ) {
-                if ( c == '\n' ) {
-                        x = 0;
-                        if ( ++y >= video_num_lines ) {
-                                y--;
-                        }
-                } else {
-                        ptr = VIDMEM + ((y*video_num_columns*params->bytes_per_char_v+x)*bytes_per_char_h);
-                        ll_write_char(ptr, c|(white<<16));
-                        if ( ++x >= video_num_columns ) {
-                                x = 0;
-                                if ( ++y >= video_num_lines ) {
-                                        y--;
-                                }
-                        }
-                }
-        }
-
-        params->video_x = x;
-        params->video_y = y;
-}
-
-static void error(char *x);
-
-/*
- * Setup for decompression
- */
-static void arch_decomp_setup(void)
-{
-        int i;
-        
-        video_num_lines = params->video_num_rows;
-        video_num_columns = params->video_num_cols;
-        bytes_per_char_h = params->bytes_per_char_h;
-        video_size_row = video_num_columns * bytes_per_char_h;
-        if (bytes_per_char_h == 4)
-                for (i = 0; i < 256; i++)
-                        con_charconvtable[i] =
-                                (i & 128 ? 1 << 0  : 0) |
-                                (i & 64  ? 1 << 4  : 0) |
-                                (i & 32  ? 1 << 8  : 0) |
-                                (i & 16  ? 1 << 12 : 0) |
-                                (i & 8   ? 1 << 16 : 0) |
-                                (i & 4   ? 1 << 20 : 0) |
-                                (i & 2   ? 1 << 24 : 0) |
-                                (i & 1   ? 1 << 28 : 0);
-        else
-                for (i = 0; i < 16; i++)
-                        con_charconvtable[i] =
-                                (i & 8   ? 1 << 0  : 0) |
-                                (i & 4   ? 1 << 8  : 0) |
-                                (i & 2   ? 1 << 16 : 0) |
-                                (i & 1   ? 1 << 24 : 0);
-
-        white = bytes_per_char_h == 8 ? 0xfc : 7;
-
-        if (params->nr_pages * params->page_size < 4096*1024) error("<4M of mem\n");
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm26/unistd.h b/include/asm-arm26/unistd.h
deleted file mode 100644
index 4c3b919177e5..000000000000
--- a/include/asm-arm26/unistd.h
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- *  linux/include/asm-arm/unistd.h
- *
- *  Copyright (C) 2001-2003 Russell King
- *  Modified 25/11/04 Ian Molton for arm26.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Please forward _all_ changes to this file to spyro@f2s.com
- * no matter what the change is.  Thanks!
- */
-#ifndef __ASM_ARM_UNISTD_H
-#define __ASM_ARM_UNISTD_H
-
-#define __NR_SYSCALL_BASE       0x900000
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall            (__NR_SYSCALL_BASE+  0)
-#define __NR_exit                       (__NR_SYSCALL_BASE+  1)
-#define __NR_fork                       (__NR_SYSCALL_BASE+  2)
-#define __NR_read                       (__NR_SYSCALL_BASE+  3)
-#define __NR_write                      (__NR_SYSCALL_BASE+  4)
-#define __NR_open                       (__NR_SYSCALL_BASE+  5)
-#define __NR_close                      (__NR_SYSCALL_BASE+  6)
-                                        /* 7 was sys_waitpid */
-#define __NR_creat                      (__NR_SYSCALL_BASE+  8)
-#define __NR_link                       (__NR_SYSCALL_BASE+  9)
-#define __NR_unlink                     (__NR_SYSCALL_BASE+ 10)
-#define __NR_execve                     (__NR_SYSCALL_BASE+ 11)
-#define __NR_chdir                      (__NR_SYSCALL_BASE+ 12)
-#define __NR_time                       (__NR_SYSCALL_BASE+ 13)
-#define __NR_mknod                      (__NR_SYSCALL_BASE+ 14)
-#define __NR_chmod                      (__NR_SYSCALL_BASE+ 15)
-#define __NR_lchown                     (__NR_SYSCALL_BASE+ 16)
-                                        /* 17 was sys_break */
-                                        /* 18 was sys_stat */
-#define __NR_lseek                      (__NR_SYSCALL_BASE+ 19)
-#define __NR_getpid                     (__NR_SYSCALL_BASE+ 20)
-#define __NR_mount                      (__NR_SYSCALL_BASE+ 21)
-#define __NR_umount                     (__NR_SYSCALL_BASE+ 22)
-#define __NR_setuid                     (__NR_SYSCALL_BASE+ 23)
-#define __NR_getuid                     (__NR_SYSCALL_BASE+ 24)
-#define __NR_stime                      (__NR_SYSCALL_BASE+ 25)
-#define __NR_ptrace                     (__NR_SYSCALL_BASE+ 26)
-#define __NR_alarm                      (__NR_SYSCALL_BASE+ 27)
-                                        /* 28 was sys_fstat */
-#define __NR_pause                      (__NR_SYSCALL_BASE+ 29)
-#define __NR_utime                      (__NR_SYSCALL_BASE+ 30)
-                                        /* 31 was sys_stty */
-                                        /* 32 was sys_gtty */
-#define __NR_access                     (__NR_SYSCALL_BASE+ 33)
-#define __NR_nice                       (__NR_SYSCALL_BASE+ 34)
-                                        /* 35 was sys_ftime */
-#define __NR_sync                       (__NR_SYSCALL_BASE+ 36)
-#define __NR_kill                       (__NR_SYSCALL_BASE+ 37)
-#define __NR_rename                     (__NR_SYSCALL_BASE+ 38)
-#define __NR_mkdir                      (__NR_SYSCALL_BASE+ 39)
-#define __NR_rmdir                      (__NR_SYSCALL_BASE+ 40)
-#define __NR_dup                        (__NR_SYSCALL_BASE+ 41)
-#define __NR_pipe                       (__NR_SYSCALL_BASE+ 42)
-#define __NR_times                      (__NR_SYSCALL_BASE+ 43)
-                                        /* 44 was sys_prof */
-#define __NR_brk                        (__NR_SYSCALL_BASE+ 45)
-#define __NR_setgid                     (__NR_SYSCALL_BASE+ 46)
-#define __NR_getgid                     (__NR_SYSCALL_BASE+ 47)
-                                        /* 48 was sys_signal */
-#define __NR_geteuid                    (__NR_SYSCALL_BASE+ 49)
-#define __NR_getegid                    (__NR_SYSCALL_BASE+ 50)
-#define __NR_acct                       (__NR_SYSCALL_BASE+ 51)
-#define __NR_umount2                    (__NR_SYSCALL_BASE+ 52)
-                                        /* 53 was sys_lock */
-#define __NR_ioctl                      (__NR_SYSCALL_BASE+ 54)
-#define __NR_fcntl                      (__NR_SYSCALL_BASE+ 55)
-                                        /* 56 was sys_mpx */
-#define __NR_setpgid                    (__NR_SYSCALL_BASE+ 57)
-                                        /* 58 was sys_ulimit */
-                                        /* 59 was sys_olduname */
-#define __NR_umask                      (__NR_SYSCALL_BASE+ 60)
-#define __NR_chroot                     (__NR_SYSCALL_BASE+ 61)
-#define __NR_ustat                      (__NR_SYSCALL_BASE+ 62)
-#define __NR_dup2                       (__NR_SYSCALL_BASE+ 63)
-#define __NR_getppid                    (__NR_SYSCALL_BASE+ 64)
-#define __NR_getpgrp                    (__NR_SYSCALL_BASE+ 65)
-#define __NR_setsid                     (__NR_SYSCALL_BASE+ 66)
-#define __NR_sigaction                  (__NR_SYSCALL_BASE+ 67)
-                                        /* 68 was sys_sgetmask */
-                                        /* 69 was sys_ssetmask */
-#define __NR_setreuid                   (__NR_SYSCALL_BASE+ 70)
-#define __NR_setregid                   (__NR_SYSCALL_BASE+ 71)
-#define __NR_sigsuspend                 (__NR_SYSCALL_BASE+ 72)
-#define __NR_sigpending                 (__NR_SYSCALL_BASE+ 73)
-#define __NR_sethostname                (__NR_SYSCALL_BASE+ 74)
-#define __NR_setrlimit                  (__NR_SYSCALL_BASE+ 75)
-#define __NR_getrlimit                  (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */
-#define __NR_getrusage                  (__NR_SYSCALL_BASE+ 77)
-#define __NR_gettimeofday               (__NR_SYSCALL_BASE+ 78)
-#define __NR_settimeofday               (__NR_SYSCALL_BASE+ 79)
-#define __NR_getgroups                  (__NR_SYSCALL_BASE+ 80)
-#define __NR_setgroups                  (__NR_SYSCALL_BASE+ 81)
-#define __NR_select                     (__NR_SYSCALL_BASE+ 82)
-#define __NR_symlink                    (__NR_SYSCALL_BASE+ 83)
-                                        /* 84 was sys_lstat */
-#define __NR_readlink                   (__NR_SYSCALL_BASE+ 85)
-#define __NR_uselib                     (__NR_SYSCALL_BASE+ 86)
-#define __NR_swapon                     (__NR_SYSCALL_BASE+ 87)
-#define __NR_reboot                     (__NR_SYSCALL_BASE+ 88)
-#define __NR_readdir                    (__NR_SYSCALL_BASE+ 89)
-#define __NR_mmap                       (__NR_SYSCALL_BASE+ 90)
-#define __NR_munmap                     (__NR_SYSCALL_BASE+ 91)
-#define __NR_truncate                   (__NR_SYSCALL_BASE+ 92)
-#define __NR_ftruncate                  (__NR_SYSCALL_BASE+ 93)
-#define __NR_fchmod                     (__NR_SYSCALL_BASE+ 94)
-#define __NR_fchown                     (__NR_SYSCALL_BASE+ 95)
-#define __NR_getpriority                (__NR_SYSCALL_BASE+ 96)
-#define __NR_setpriority                (__NR_SYSCALL_BASE+ 97)
-                                        /* 98 was sys_profil */
-#define __NR_statfs                     (__NR_SYSCALL_BASE+ 99)
-#define __NR_fstatfs                    (__NR_SYSCALL_BASE+100)
-                                        /* 101 was sys_ioperm */
-#define __NR_socketcall                 (__NR_SYSCALL_BASE+102)
-#define __NR_syslog                     (__NR_SYSCALL_BASE+103)
-#define __NR_setitimer                  (__NR_SYSCALL_BASE+104)
-#define __NR_getitimer                  (__NR_SYSCALL_BASE+105)
-#define __NR_stat                       (__NR_SYSCALL_BASE+106)
-#define __NR_lstat                      (__NR_SYSCALL_BASE+107)
-#define __NR_fstat                      (__NR_SYSCALL_BASE+108)
-                                        /* 109 was sys_uname */
-                                        /* 110 was sys_iopl */
-#define __NR_vhangup                    (__NR_SYSCALL_BASE+111)
-                                        /* 112 was sys_idle */
-#define __NR_syscall                    (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
-#define __NR_wait4                      (__NR_SYSCALL_BASE+114)
-#define __NR_swapoff                    (__NR_SYSCALL_BASE+115)
-#define __NR_sysinfo                    (__NR_SYSCALL_BASE+116)
-#define __NR_ipc                        (__NR_SYSCALL_BASE+117)
-#define __NR_fsync                      (__NR_SYSCALL_BASE+118)
-#define __NR_sigreturn                  (__NR_SYSCALL_BASE+119)
-#define __NR_clone                      (__NR_SYSCALL_BASE+120)
-#define __NR_setdomainname              (__NR_SYSCALL_BASE+121)
-#define __NR_uname                      (__NR_SYSCALL_BASE+122)
-                                        /* 123 was sys_modify_ldt */
-#define __NR_adjtimex                   (__NR_SYSCALL_BASE+124)
-#define __NR_mprotect                   (__NR_SYSCALL_BASE+125)
-#define __NR_sigprocmask                (__NR_SYSCALL_BASE+126)
-                                        /* 127 was sys_create_module */
-#define __NR_init_module                (__NR_SYSCALL_BASE+128)
-#define __NR_delete_module              (__NR_SYSCALL_BASE+129)
-                                        /* 130 was sys_get_kernel_syms */
-#define __NR_quotactl                   (__NR_SYSCALL_BASE+131)
-#define __NR_getpgid                    (__NR_SYSCALL_BASE+132)
-#define __NR_fchdir                     (__NR_SYSCALL_BASE+133)
-#define __NR_bdflush                    (__NR_SYSCALL_BASE+134)
-#define __NR_sysfs                      (__NR_SYSCALL_BASE+135)
-#define __NR_personality                (__NR_SYSCALL_BASE+136)
-                                        /* 137 was sys_afs_syscall */
-#define __NR_setfsuid                   (__NR_SYSCALL_BASE+138)
-#define __NR_setfsgid                   (__NR_SYSCALL_BASE+139)
-#define __NR__llseek                    (__NR_SYSCALL_BASE+140)
-#define __NR_getdents                   (__NR_SYSCALL_BASE+141)
-#define __NR__newselect                 (__NR_SYSCALL_BASE+142)
-#define __NR_flock                      (__NR_SYSCALL_BASE+143)
-#define __NR_msync                      (__NR_SYSCALL_BASE+144)
-#define __NR_readv                      (__NR_SYSCALL_BASE+145)
-#define __NR_writev                     (__NR_SYSCALL_BASE+146)
-#define __NR_getsid                     (__NR_SYSCALL_BASE+147)
-#define __NR_fdatasync                  (__NR_SYSCALL_BASE+148)
-#define __NR__sysctl                    (__NR_SYSCALL_BASE+149)
-#define __NR_mlock                      (__NR_SYSCALL_BASE+150)
-#define __NR_munlock                    (__NR_SYSCALL_BASE+151)
-#define __NR_mlockall                   (__NR_SYSCALL_BASE+152)
-#define __NR_munlockall                 (__NR_SYSCALL_BASE+153)
-#define __NR_sched_setparam             (__NR_SYSCALL_BASE+154)
-#define __NR_sched_getparam             (__NR_SYSCALL_BASE+155)
-#define __NR_sched_setscheduler         (__NR_SYSCALL_BASE+156)
-#define __NR_sched_getscheduler         (__NR_SYSCALL_BASE+157)
-#define __NR_sched_yield                (__NR_SYSCALL_BASE+158)
-#define __NR_sched_get_priority_max     (__NR_SYSCALL_BASE+159)
-#define __NR_sched_get_priority_min     (__NR_SYSCALL_BASE+160)
-#define __NR_sched_rr_get_interval      (__NR_SYSCALL_BASE+161)
-#define __NR_nanosleep                  (__NR_SYSCALL_BASE+162)
-#define __NR_mremap                     (__NR_SYSCALL_BASE+163)
-#define __NR_setresuid                  (__NR_SYSCALL_BASE+164)
-#define __NR_getresuid                  (__NR_SYSCALL_BASE+165)
-                                        /* 166 was sys_vm86 */
-                                        /* 167 was sys_query_module */
-#define __NR_poll                       (__NR_SYSCALL_BASE+168)
-#define __NR_nfsservctl                 (__NR_SYSCALL_BASE+169)
-#define __NR_setresgid                  (__NR_SYSCALL_BASE+170)
-#define __NR_getresgid                  (__NR_SYSCALL_BASE+171)
-#define __NR_prctl                      (__NR_SYSCALL_BASE+172)
-#define __NR_rt_sigreturn               (__NR_SYSCALL_BASE+173)
-#define __NR_rt_sigaction               (__NR_SYSCALL_BASE+174)
-#define __NR_rt_sigprocmask             (__NR_SYSCALL_BASE+175)
-#define __NR_rt_sigpending              (__NR_SYSCALL_BASE+176)
-#define __NR_rt_sigtimedwait            (__NR_SYSCALL_BASE+177)
-#define __NR_rt_sigqueueinfo            (__NR_SYSCALL_BASE+178)
-#define __NR_rt_sigsuspend              (__NR_SYSCALL_BASE+179)
-#define __NR_pread64                    (__NR_SYSCALL_BASE+180)
-#define __NR_pwrite64                   (__NR_SYSCALL_BASE+181)
-#define __NR_chown                      (__NR_SYSCALL_BASE+182)
-#define __NR_getcwd                     (__NR_SYSCALL_BASE+183)
-#define __NR_capget                     (__NR_SYSCALL_BASE+184)
-#define __NR_capset                     (__NR_SYSCALL_BASE+185)
-#define __NR_sigaltstack                (__NR_SYSCALL_BASE+186)
-#define __NR_sendfile                   (__NR_SYSCALL_BASE+187)
-                                        /* 188 reserved */
-                                        /* 189 reserved */
-#define __NR_vfork                      (__NR_SYSCALL_BASE+190)
-#define __NR_ugetrlimit                 (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */
-#define __NR_mmap2                      (__NR_SYSCALL_BASE+192)
-#define __NR_truncate64                 (__NR_SYSCALL_BASE+193)
-#define __NR_ftruncate64                (__NR_SYSCALL_BASE+194)
-#define __NR_stat64                     (__NR_SYSCALL_BASE+195)
-#define __NR_lstat64                    (__NR_SYSCALL_BASE+196)
-#define __NR_fstat64                    (__NR_SYSCALL_BASE+197)
-#define __NR_lchown32                   (__NR_SYSCALL_BASE+198)
-#define __NR_getuid32                   (__NR_SYSCALL_BASE+199)
-#define __NR_getgid32                   (__NR_SYSCALL_BASE+200)
-#define __NR_geteuid32                  (__NR_SYSCALL_BASE+201)
-#define __NR_getegid32                  (__NR_SYSCALL_BASE+202)
-#define __NR_setreuid32                 (__NR_SYSCALL_BASE+203)
-#define __NR_setregid32                 (__NR_SYSCALL_BASE+204)
-#define __NR_getgroups32                (__NR_SYSCALL_BASE+205)
-#define __NR_setgroups32                (__NR_SYSCALL_BASE+206)
-#define __NR_fchown32                   (__NR_SYSCALL_BASE+207)
-#define __NR_setresuid32                (__NR_SYSCALL_BASE+208)
-#define __NR_getresuid32                (__NR_SYSCALL_BASE+209)
-#define __NR_setresgid32                (__NR_SYSCALL_BASE+210)
-#define __NR_getresgid32                (__NR_SYSCALL_BASE+211)
-#define __NR_chown32                    (__NR_SYSCALL_BASE+212)
-#define __NR_setuid32                   (__NR_SYSCALL_BASE+213)
-#define __NR_setgid32                   (__NR_SYSCALL_BASE+214)
-#define __NR_setfsuid32                 (__NR_SYSCALL_BASE+215)
-#define __NR_setfsgid32                 (__NR_SYSCALL_BASE+216)
-#define __NR_getdents64                 (__NR_SYSCALL_BASE+217)
-#define __NR_pivot_root                 (__NR_SYSCALL_BASE+218)
-#define __NR_mincore                    (__NR_SYSCALL_BASE+219)
-#define __NR_madvise                    (__NR_SYSCALL_BASE+220)
-#define __NR_fcntl64                    (__NR_SYSCALL_BASE+221)
-                                        /* 222 for tux */
-                                        /* 223 is unused */
-#define __NR_gettid                     (__NR_SYSCALL_BASE+224)
-#define __NR_readahead                  (__NR_SYSCALL_BASE+225)
-#define __NR_setxattr                   (__NR_SYSCALL_BASE+226)
-#define __NR_lsetxattr                  (__NR_SYSCALL_BASE+227)
-#define __NR_fsetxattr                  (__NR_SYSCALL_BASE+228)
-#define __NR_getxattr                   (__NR_SYSCALL_BASE+229)
-#define __NR_lgetxattr                  (__NR_SYSCALL_BASE+230)
-#define __NR_fgetxattr                  (__NR_SYSCALL_BASE+231)
-#define __NR_listxattr                  (__NR_SYSCALL_BASE+232)
-#define __NR_llistxattr                 (__NR_SYSCALL_BASE+233)
-#define __NR_flistxattr                 (__NR_SYSCALL_BASE+234)
-#define __NR_removexattr                (__NR_SYSCALL_BASE+235)
-#define __NR_lremovexattr               (__NR_SYSCALL_BASE+236)
-#define __NR_fremovexattr               (__NR_SYSCALL_BASE+237)
-#define __NR_tkill                      (__NR_SYSCALL_BASE+238)
-#define __NR_sendfile64                 (__NR_SYSCALL_BASE+239)
-#define __NR_futex                      (__NR_SYSCALL_BASE+240)
-#define __NR_sched_setaffinity          (__NR_SYSCALL_BASE+241)
-#define __NR_sched_getaffinity          (__NR_SYSCALL_BASE+242)
-#define __NR_io_setup                   (__NR_SYSCALL_BASE+243)
-#define __NR_io_destroy                 (__NR_SYSCALL_BASE+244)
-#define __NR_io_getevents               (__NR_SYSCALL_BASE+245)
-#define __NR_io_submit                  (__NR_SYSCALL_BASE+246)
-#define __NR_io_cancel                  (__NR_SYSCALL_BASE+247)
-#define __NR_exit_group                 (__NR_SYSCALL_BASE+248)
-#define __NR_lookup_dcookie             (__NR_SYSCALL_BASE+249)
-#define __NR_epoll_create               (__NR_SYSCALL_BASE+250)
-#define __NR_epoll_ctl                  (__NR_SYSCALL_BASE+251)
-#define __NR_epoll_wait                 (__NR_SYSCALL_BASE+252)
-#define __NR_remap_file_pages           (__NR_SYSCALL_BASE+253)
-                                        /* 254 for set_thread_area */
-                                        /* 255 for get_thread_area */
-                                        /* 256 for set_tid_address */
-#define __NR_timer_create               (__NR_SYSCALL_BASE+257)
-#define __NR_timer_settime              (__NR_SYSCALL_BASE+258)
-#define __NR_timer_gettime              (__NR_SYSCALL_BASE+259)
-#define __NR_timer_getoverrun           (__NR_SYSCALL_BASE+260)
-#define __NR_timer_delete               (__NR_SYSCALL_BASE+261)
-#define __NR_clock_settime              (__NR_SYSCALL_BASE+262)
-#define __NR_clock_gettime              (__NR_SYSCALL_BASE+263)
-#define __NR_clock_getres               (__NR_SYSCALL_BASE+264)
-#define __NR_clock_nanosleep            (__NR_SYSCALL_BASE+265)
-#define __NR_statfs64                   (__NR_SYSCALL_BASE+266)
-#define __NR_fstatfs64                  (__NR_SYSCALL_BASE+267)
-#define __NR_tgkill                     (__NR_SYSCALL_BASE+268)
-#define __NR_utimes                     (__NR_SYSCALL_BASE+269)
-#define __NR_fadvise64_64               (__NR_SYSCALL_BASE+270)
-#define __NR_pciconfig_iobase           (__NR_SYSCALL_BASE+271)
-#define __NR_pciconfig_read             (__NR_SYSCALL_BASE+272)
-#define __NR_pciconfig_write            (__NR_SYSCALL_BASE+273)
-#define __NR_mq_open                    (__NR_SYSCALL_BASE+274)
-#define __NR_mq_unlink                  (__NR_SYSCALL_BASE+275)
-#define __NR_mq_timedsend               (__NR_SYSCALL_BASE+276)
-#define __NR_mq_timedreceive            (__NR_SYSCALL_BASE+277)
-#define __NR_mq_notify                  (__NR_SYSCALL_BASE+278)
-#define __NR_mq_getsetattr              (__NR_SYSCALL_BASE+279)
-#define __NR_waitid                     (__NR_SYSCALL_BASE+280)
-
-/*
- * The following SWIs are ARM private. FIXME - make appropriate for arm26
- */
-#define __ARM_NR_BASE                   (__NR_SYSCALL_BASE+0x0f0000)
-#define __ARM_NR_breakpoint             (__ARM_NR_BASE+1)
-#define __ARM_NR_cacheflush             (__ARM_NR_BASE+2)
-#define __ARM_NR_usr26                  (__ARM_NR_BASE+3)
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ARM_UNISTD_H */
diff --git a/include/asm-arm26/user.h b/include/asm-arm26/user.h
deleted file mode 100644
index 3e8b0f879159..000000000000
--- a/include/asm-arm26/user.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _ARM_USER_H
-#define _ARM_USER_H
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-struct user_fp {
-        struct fp_reg {
-                unsigned int sign1:1;
-                unsigned int unused:15;
-                unsigned int sign2:1;
-                unsigned int exponent:14;
-                unsigned int j:1;
-                unsigned int mantissa1:31;
-                unsigned int mantissa0:32;
-        } fpregs[8];
-        unsigned int fpsr:32;
-        unsigned int fpcr:32;
-        unsigned char ftype[8];
-        unsigned int init_flag;
-};
-
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-  struct pt_regs regs;          /* Where the registers are actually stored */
-/* ptrace does not yet supply these.  Someday.... */
-  int u_fpvalid;                /* True if math co-processor being used. */
-                                /* for this mess. Not yet used. */
-/* The rest of this junk is to help gdb figure out what goes where */
-  unsigned long int u_tsize;    /* Text segment size (pages). */
-  unsigned long int u_dsize;    /* Data segment size (pages). */
-  unsigned long int u_ssize;    /* Stack segment size (pages). */
-  unsigned long start_code;     /* Starting virtual address of text. */
-  unsigned long start_stack;    /* Starting virtual address of stack area.
-                                   This is actually the bottom of the stack,
-                                   the top of the stack is always found in the
-                                   esp register.  */
-  long int signal;              /* Signal that caused the core dump. */
-  int reserved;                 /* No longer used */
-  struct pt_regs * u_ar0;       /* Used by gdb to help find the values for */
-                                /* the registers. */
-  unsigned long magic;          /* To uniquely identify a core file */
-  char u_comm[32];              /* User command that was responsible */
-  int u_debugreg[8];
-  struct user_fp u_fp;          /* FP state */
-  struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
-                                /* the FP registers. */
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _ARM_USER_H */
diff --git a/include/asm-arm26/xor.h b/include/asm-arm26/xor.h
deleted file mode 100644
index e7c4cf58bed1..000000000000
--- a/include/asm-arm26/xor.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  linux/include/asm-arm/xor.h
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm-generic/xor.h>
-
-#define __XOR(a1, a2) a1 ^= a2
-
-#define GET_BLOCK_2(dst) \
-        __asm__("ldmia  %0, {%1, %2}" \
-                : "=r" (dst), "=r" (a1), "=r" (a2) \
-                : "0" (dst))
-
-#define GET_BLOCK_4(dst) \
-        __asm__("ldmia  %0, {%1, %2, %3, %4}" \
-                : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
-                : "0" (dst))
-
-#define XOR_BLOCK_2(src) \
-        __asm__("ldmia  %0!, {%1, %2}" \
-                : "=r" (src), "=r" (b1), "=r" (b2) \
-                : "0" (src)); \
-        __XOR(a1, b1); __XOR(a2, b2);
-
-#define XOR_BLOCK_4(src) \
-        __asm__("ldmia  %0!, {%1, %2, %3, %4}" \
-                : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
-                : "0" (src)); \
-        __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
-
-#define PUT_BLOCK_2(dst) \
-        __asm__ __volatile__("stmia     %0!, {%2, %3}" \
-                : "=r" (dst) \
-                : "0" (dst), "r" (a1), "r" (a2))
-
-#define PUT_BLOCK_4(dst) \
-        __asm__ __volatile__("stmia     %0!, {%2, %3, %4, %5}" \
-                : "=r" (dst) \
-                : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
-
-static void
-xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-        unsigned int lines = bytes / sizeof(unsigned long) / 4;
-        register unsigned int a1 __asm__("r4");
-        register unsigned int a2 __asm__("r5");
-        register unsigned int a3 __asm__("r6");
-        register unsigned int a4 __asm__("r7");
-        register unsigned int b1 __asm__("r8");
-        register unsigned int b2 __asm__("r9");
-        register unsigned int b3 __asm__("ip");
-        register unsigned int b4 __asm__("lr");
-
-        do {
-                GET_BLOCK_4(p1);
-                XOR_BLOCK_4(p2);
-                PUT_BLOCK_4(p1);
-        } while (--lines);
-}
-
-static void
-xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-                unsigned long *p3)
-{
-        unsigned int lines = bytes / sizeof(unsigned long) / 4;
-        register unsigned int a1 __asm__("r4");
-        register unsigned int a2 __asm__("r5");
-        register unsigned int a3 __asm__("r6");
-        register unsigned int a4 __asm__("r7");
-        register unsigned int b1 __asm__("r8");
-        register unsigned int b2 __asm__("r9");
-        register unsigned int b3 __asm__("ip");
-        register unsigned int b4 __asm__("lr");
-
-        do {
-                GET_BLOCK_4(p1);
-                XOR_BLOCK_4(p2);
-                XOR_BLOCK_4(p3);
-                PUT_BLOCK_4(p1);
-        } while (--lines);
-}
-
-static void
-xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-                unsigned long *p3, unsigned long *p4)
-{
-        unsigned int lines = bytes / sizeof(unsigned long) / 2;
-        register unsigned int a1 __asm__("r8");
-        register unsigned int a2 __asm__("r9");
-        register unsigned int b1 __asm__("ip");
-        register unsigned int b2 __asm__("lr");
-
-        do {
-                GET_BLOCK_2(p1);
-                XOR_BLOCK_2(p2);
-                XOR_BLOCK_2(p3);
-                XOR_BLOCK_2(p4);
-                PUT_BLOCK_2(p1);
-        } while (--lines);
-}
-
-static void
-xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-                unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-        unsigned int lines = bytes / sizeof(unsigned long) / 2;
-        register unsigned int a1 __asm__("r8");
-        register unsigned int a2 __asm__("r9");
-        register unsigned int b1 __asm__("ip");
-        register unsigned int b2 __asm__("lr");
-
-        do {
-                GET_BLOCK_2(p1);
-                XOR_BLOCK_2(p2);
-                XOR_BLOCK_2(p3);
-                XOR_BLOCK_2(p4);
-                XOR_BLOCK_2(p5);
-                PUT_BLOCK_2(p1);
-        } while (--lines);
-}
-
-static struct xor_block_template xor_block_arm4regs = {
-        .name   = "arm4regs",
-        .do_2   = xor_arm4regs_2,
-        .do_3   = xor_arm4regs_3,
-        .do_4   = xor_arm4regs_4,
-        .do_5   = xor_arm4regs_5,
-};
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES                       \
-        do {                                    \
-                xor_speed(&xor_block_arm4regs); \
-                xor_speed(&xor_block_8regs);    \
-                xor_speed(&xor_block_32regs);   \
-        } while (0)
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index da8eb8ad9e9b..3ea68cd3b61f 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -120,7 +120,6 @@ enum zone_type {
          * ---------------------------
          * parisc, ia64, sparc  <4G
          * s390                 <2G
-         * arm26                <48M
          * arm                  Various
          * alpha                Unlimited or 0-16MB.
          *