Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (112 commits)
  sh: Move SH-4 CPU headers down one more level.
  sh: Only build in gpio.o when CONFIG_GENERIC_GPIO is selected.
  sh: Migrate common board headers to mach-common/.
  sh: Move the CPU definition headers from asm/ to cpu/.
  serial: sh-sci: Add support SCIF of SH7723
  video: add sh_mobile_lcdc platform flags
  video: remove unused sh_mobile_lcdc platform data
  sh: remove consistent alloc cruft
  sh: add dynamic crash base address support
  sh: reduce Migo-R smc91x overruns
  sh: Fix up some merge damage.
  Fix debugfs_create_file's error checking method for arch/sh/mm/
  Fix debugfs_create_dir's error checking method for arch/sh/kernel/
  sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA board
  sh: Use sh7720 GPIO on magicpanelr2 board
  sh: Add sh7720 pinmux code
  sh: Use sh7203 GPIO on rsk7203 board
  sh: Add sh7203 pinmux code
  sh: Use sh7723 GPIO on AP325RXA board
  sh: Add sh7723 pinmux code
  ...

1 files changed, 78 insertions, 0 deletions

diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
new file mode 100644
index 000000000000..1a4bc6ada606
--- /dev/null
+++ b/include/video/sh_mobile_lcdc.h
@@ -0,0 +1,78 @@
+#ifndef __ASM_SH_MOBILE_LCDC_H__
+#define __ASM_SH_MOBILE_LCDC_H__
+
+#include <linux/fb.h>
+
+enum { RGB8,   /* 24bpp, 8:8:8 */
+       RGB9,   /* 18bpp, 9:9 */
+       RGB12A, /* 24bpp, 12:12 */
+       RGB12B, /* 12bpp */
+       RGB16,  /* 16bpp */
+       RGB18,  /* 18bpp */
+       RGB24,  /* 24bpp */
+       SYS8A,  /* 24bpp, 8:8:8 */
+       SYS8B,  /* 18bpp, 8:8:2 */
+       SYS8C,  /* 18bpp, 2:8:8 */
+       SYS8D,  /* 16bpp, 8:8 */
+       SYS9,   /* 18bpp, 9:9 */
+       SYS12,  /* 24bpp, 12:12 */
+       SYS16A, /* 16bpp */
+       SYS16B, /* 18bpp, 16:2 */
+       SYS16C, /* 18bpp, 2:16 */
+       SYS18,  /* 18bpp */
+       SYS24 };/* 24bpp */
+
+enum { LCDC_CHAN_DISABLED = 0,
+       LCDC_CHAN_MAINLCD,
+       LCDC_CHAN_SUBLCD };
+
+enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL };
+
+#define LCDC_FLAGS_DWPOL (1 << 0) /* Rising edge dot clock data latch */
+#define LCDC_FLAGS_DIPOL (1 << 1) /* Active low display enable polarity */
+#define LCDC_FLAGS_DAPOL (1 << 2) /* Active low display data polarity */
+#define LCDC_FLAGS_HSCNT (1 << 3) /* Disable HSYNC during VBLANK */
+#define LCDC_FLAGS_DWCNT (1 << 4) /* Disable dotclock during blanking */
+
+struct sh_mobile_lcdc_sys_bus_cfg {
+        unsigned long ldmt2r;
+        unsigned long ldmt3r;
+};
+
+struct sh_mobile_lcdc_sys_bus_ops {
+        void (*write_index)(void *handle, unsigned long data);
+        void (*write_data)(void *handle, unsigned long data);
+        unsigned long (*read_data)(void *handle);
+};
+
+struct sh_mobile_lcdc_board_cfg {
+        void *board_data;
+        int (*setup_sys)(void *board_data, void *sys_ops_handle,
+                         struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+        void (*display_on)(void *board_data);
+        void (*display_off)(void *board_data);
+};
+
+struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
+        unsigned long width;
+        unsigned long height;
+};
+
+struct sh_mobile_lcdc_chan_cfg {
+        int chan;
+        int bpp;
+        int interface_type; /* selects RGBn or SYSn I/F, see above */
+        int clock_divider;
+        unsigned long flags; /* LCDC_FLAGS_... */
+        struct fb_videomode lcd_cfg;
+        struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
+        struct sh_mobile_lcdc_board_cfg board_cfg;
+        struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
+};
+
+struct sh_mobile_lcdc_info {
+        int clock_source;
+        struct sh_mobile_lcdc_chan_cfg ch[2];
+};
+
+#endif /* __ASM_SH_MOBILE_LCDC_H__ */