Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

1 files changed, 34 insertions, 13 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 75a34609eed7..909956c97c44 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -336,13 +336,16 @@ enum mac80211_rx_flags {
  * The low-level driver should provide this information (the subset
  * supported by hardware) to the 802.11 code with each received
  * frame.
+ *
  * @mactime: value in microseconds of the 64-bit Time Synchronization Function
  *      (TSF) timer when the first data symbol (MPDU) arrived at the hardware.
  * @band: the active band when this frame was received
  * @freq: frequency the radio was tuned to when receiving this frame, in MHz
- * @ssi: signal strength when receiving this frame
- * @signal: used as 'qual' in statistics reporting
- * @noise: PHY noise when receiving this frame
+ * @signal: signal strength when receiving this frame, either in dBm, in dB or
+ *      unspecified depending on the hardware capabilities flags
+ *      @IEEE80211_HW_SIGNAL_*
+ * @noise: noise when receiving this frame, in dBm.
+ * @qual: overall signal quality indication, in percent (0-100).
  * @antenna: antenna used
  * @rate_idx: index of data rate into band's supported rates
  * @flag: %RX_FLAG_*
@@ -351,9 +354,9 @@ struct ieee80211_rx_status {
         u64 mactime;
         enum ieee80211_band band;
         int freq;
-        int ssi;
         int signal;
         int noise;
+        int qual;
         int antenna;
         int rate_idx;
         int flag;
@@ -392,7 +395,8 @@ enum ieee80211_tx_status_flags {
  *      relevant only if IEEE80211_TX_STATUS_AMPDU was set.
  * @ampdu_ack_map: block ack bit map for the aggregation.
  *      relevant only if IEEE80211_TX_STATUS_AMPDU was set.
- * @ack_signal: signal strength of the ACK frame
+ * @ack_signal: signal strength of the ACK frame either in dBm, dB or unspec
+ *      depending on hardware capabilites flags @IEEE80211_HW_SIGNAL_*
  */
 struct ieee80211_tx_status {
         struct ieee80211_tx_control control;
@@ -703,6 +707,25 @@ enum ieee80211_tkip_key_type {
  * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE:
  *      Hardware is not capable of receiving frames with short preamble on
  *      the 2.4 GHz band.
+ *
+ * @IEEE80211_HW_SIGNAL_UNSPEC:
+ *      Hardware can provide signal values but we don't know its units. We
+ *      expect values between 0 and @max_signal.
+ *      If possible please provide dB or dBm instead.
+ *
+ * @IEEE80211_HW_SIGNAL_DB:
+ *      Hardware gives signal values in dB, decibel difference from an
+ *      arbitrary, fixed reference. We expect values between 0 and @max_signal.
+ *      If possible please provide dBm instead.
+ *
+ * @IEEE80211_HW_SIGNAL_DBM:
+ *      Hardware gives signal values in dBm, decibel difference from
+ *      one milliwatt. This is the preferred method since it is standardized
+ *      between different devices. @max_signal does not need to be set.
+ *
+ * @IEEE80211_HW_NOISE_DBM:
+ *      Hardware can provide noise (radio interference) values in units dBm,
+ *      decibel difference from one milliwatt.
  */
 enum ieee80211_hw_flags {
         IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE           = 1<<0,
@@ -710,6 +733,10 @@ enum ieee80211_hw_flags {
         IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING        = 1<<2,
         IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE          = 1<<3,
         IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE      = 1<<4,
+        IEEE80211_HW_SIGNAL_UNSPEC                      = 1<<5,
+        IEEE80211_HW_SIGNAL_DB                          = 1<<6,
+        IEEE80211_HW_SIGNAL_DBM                         = 1<<7,
+        IEEE80211_HW_NOISE_DBM                          = 1<<8,
 };
 
 /**
@@ -740,12 +767,8 @@ enum ieee80211_hw_flags {
  *
  * @channel_change_time: time (in microseconds) it takes to change channels.
  *
- * @max_rssi: Maximum value for ssi in RX information, use
- *      negative numbers for dBm and 0 to indicate no support.
- *
- * @max_signal: like @max_rssi, but for the signal value.
- *
- * @max_noise: like @max_rssi, but for the noise value.
+ * @max_signal: Maximum value for signal (rssi) in RX information, used
+ *     only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
  *
  * @queues: number of available hardware transmit queues for
  *      data packets. WMM/QoS requires at least four, these
@@ -775,9 +798,7 @@ struct ieee80211_hw {
         int channel_change_time;
         int vif_data_size;
         u16 queues, ampdu_queues;
-        s8 max_rssi;
         s8 max_signal;
-        s8 max_noise;
 };
 
 /**