Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (120 commits)
  cx231xx: Convert to snd_card_create()
  V4L/DVB (11440): PWC: fix build error when CONFIG_INPUT=m
  V4L/DVB (11439): UVC: uvc_status_cleanup(): undefined reference to `input_unregister_device'
  V4L/DVB (11438): au0828: fix Kconfig dependance
  V4L/DVB (11437): pvrusb2: Drop client_register/unregister stubs
  V4L/DVB (11436): radio-mr800: convert to to v4l2_device
  V4L/DVB (11435): dsbr100 radio: convert to to v4l2_device
  V4L/DVB: zr364xx: remove unused #include <version.h>
  V4L/DVB: usbvision: remove unused #include <version.h>
  V4L/DVB (11427): gspca - m5602: Minor cleanups
  V4L/DVB (11426): gspca - m5602: Don't touch hflip/vflip register on Read/Modify/Write
  V4L/DVB (11425): gspca - m5602: Move the vflip quirk to probe stage.
  V4L/DVB (11424): gspca - m5602-ov9650: Use the local ctrl cache. Adjust image on vflip.
  V4L/DVB (11423): gspca - m5602-ov9650: Add a disconnect hook, setup a ctrl cache ctrl.
  V4L/DVB (11422): gspca - m5602-ov9650: Replace a magic constant with a define
  V4L/DVB (11421): gspca - m5602-ov9650: Synthesize modesetting.
  V4L/DVB (11420): gspca - m5602: Improve error handling in the ov9650 driver
  V4L/DVB (11419): gspca - m5602-ov9650: Don't read exposure data from COM1.
  V4L/DVB (11418): gspca - m5602-ov9650: Auto white balancing is on by default
  V4L/DVB (11417): gspca - m5602-ov9650: Autogain is on by default
  ...

1 files changed, 98 insertions, 17 deletions

diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 1d181b4ccb01..17856081c809 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -27,6 +27,16 @@ struct v4l2_device;
 struct v4l2_subdev;
 struct tuner_setup;
 
+/* decode_vbi_line */
+struct v4l2_decode_vbi_line {
+        u32 is_second_field;    /* Set to 0 for the first (odd) field,
+                                   set to 1 for the second (even) field. */
+        u8 *p;                  /* Pointer to the sliced VBI data from the decoder.
+                                   On exit points to the start of the payload. */
+        u32 line;               /* Line number of the sliced VBI data (1-23) */
+        u32 type;               /* VBI service type (V4L2_SLICED_*). 0 if no service found */
+};
+
 /* Sub-devices are devices that are connected somehow to the main bridge
    device. These devices are usually audio/video muxers/encoders/decoders or
    sensors and webcam controllers.
@@ -68,11 +78,26 @@ struct tuner_setup;
    the use-case it might be better to use subdev-specific ops (currently
    not yet implemented) since ops provide proper type-checking.
  */
+
+/* init: initialize the sensor registors to some sort of reasonable default
+        values. Do not use for new drivers and should be removed in existing
+        drivers.
+
+   load_fw: load firmware.
+
+   reset: generic reset command. The argument selects which subsystems to
+        reset. Passing 0 will always reset the whole chip. Do not use for new
+        drivers without discussing this first on the linux-media mailinglist.
+        There should be no reason normally to reset a device.
+
+   s_gpio: set GPIO pins. Very simple right now, might need to be extended with
+        a direction argument if needed.
+ */
 struct v4l2_subdev_core_ops {
         int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
         int (*log_status)(struct v4l2_subdev *sd);
         int (*init)(struct v4l2_subdev *sd, u32 val);
-        int (*s_standby)(struct v4l2_subdev *sd, u32 standby);
+        int (*load_fw)(struct v4l2_subdev *sd);
         int (*reset)(struct v4l2_subdev *sd, u32 val);
         int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
         int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
@@ -82,6 +107,7 @@ struct v4l2_subdev_core_ops {
         int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
         int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
         int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+        int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
         long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
 #ifdef CONFIG_VIDEO_ADV_DEBUG
         int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
@@ -89,6 +115,16 @@ struct v4l2_subdev_core_ops {
 #endif
 };
 
+/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio.
+
+   s_radio: v4l device was opened in Radio mode, to be replaced by s_mode.
+
+   s_type_addr: sets tuner type and its I2C addr.
+
+   s_config: sets tda9887 specific stuff, like port1, port2 and qss
+
+   s_standby: puts tuner on powersaving state, disabling it, except for i2c.
+ */
 struct v4l2_subdev_tuner_ops {
         int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type);
         int (*s_radio)(struct v4l2_subdev *sd);
@@ -96,20 +132,77 @@ struct v4l2_subdev_tuner_ops {
         int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
         int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
         int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
-        int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
         int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
         int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
+        int (*s_standby)(struct v4l2_subdev *sd);
 };
 
+/* s_clock_freq: set the frequency (in Hz) of the audio clock output.
+        Used to slave an audio processor to the video decoder, ensuring that
+        audio and video remain synchronized. Usual values for the frequency
+        are 48000, 44100 or 32000 Hz. If the frequency is not supported, then
+        -EINVAL is returned.
+
+   s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard
+        way to select I2S clock used by driving digital audio streams at some
+        board designs. Usual values for the frequency are 1024000 and 2048000.
+        If the frequency is not supported, then -EINVAL is returned.
+
+   s_routing: used to define the input and/or output pins of an audio chip,
+        and any additional configuration data.
+        Never attempt to use user-level input IDs (e.g. Composite, S-Video,
+        Tuner) at this level. An i2c device shouldn't know about whether an
+        input pin is connected to a Composite connector, become on another
+        board or platform it might be connected to something else entirely.
+        The calling driver is responsible for mapping a user-level input to
+        the right pins on the i2c device.
+ */
 struct v4l2_subdev_audio_ops {
         int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
         int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
-        int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route);
+        int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
 };
 
+/*
+   decode_vbi_line: video decoders that support sliced VBI need to implement
+        this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the
+        start of the VBI data that was generated by the decoder. The driver
+        then parses the sliced VBI data and sets the other fields in the
+        struct accordingly. The pointer p is updated to point to the start of
+        the payload which can be copied verbatim into the data field of the
+        v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the
+        type field is set to 0 on return.
+
+   s_vbi_data: used to generate VBI signals on a video signal.
+        v4l2_sliced_vbi_data is filled with the data packets that should be
+        output. Note that if you set the line field to 0, then that VBI signal
+        is disabled. If no valid VBI data was found, then the type field is
+        set to 0 on return.
+
+   g_vbi_data: used to obtain the sliced VBI packet from a readback register.
+        Not all video decoders support this. If no data is available because
+        the readback register contains invalid or erroneous data -EIO is
+        returned. Note that you must fill in the 'id' member and the 'field'
+        member (to determine whether CC data from the first or second field
+        should be obtained).
+
+   s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
+        video input devices.
+
+  s_crystal_freq: sets the frequency of the crystal used to generate the
+        clocks in Hz. An extra flags field allows device specific configuration
+        regarding clock frequency dividers, etc. If not used, then set flags
+        to 0. If the frequency is not supported, then -EINVAL is returned.
+
+   g_input_status: get input status. Same as the status field in the v4l2_input
+        struct.
+
+   s_routing: see s_routing in audio_ops, except this version is for video
+        devices.
+ */
 struct v4l2_subdev_video_ops {
-        int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route);
-        int (*s_crystal_freq)(struct v4l2_subdev *sd, struct v4l2_crystal_freq *freq);
+        int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
+        int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
         int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line);
         int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data);
         int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data);
@@ -163,18 +256,6 @@ static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
         return sd->priv;
 }
 
-/* Convert an ioctl-type command to the proper v4l2_subdev_ops function call.
-   This is used by subdev modules that can be called by both old-style ioctl
-   commands and through the v4l2_subdev_ops.
-
-   The ioctl API of the subdev driver can call this function to call the
-   right ops based on the ioctl cmd and arg.
-
-   Once all subdev drivers have been converted and all drivers no longer
-   use the ioctl interface, then this function can be removed.
- */
-int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg);
-
 static inline void v4l2_subdev_init(struct v4l2_subdev *sd,
                                         const struct v4l2_subdev_ops *ops)
 {