[PATCH] ide: cleanup ide.h

Remove:
* stale comment
* unused HOST() macro
* unused ata_{error,control}_t types
* unused atapi_select_t type
* ide_init_subdrivers() prototype

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 122 deletions

diff --git a/include/linux/ide.h b/include/linux/ide.h
index a6b28dcf8f0d..613534b77054 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -23,17 +23,6 @@
 #include <asm/io.h>
 #include <asm/semaphore.h>
 
-/*
- * This is the multiple IDE interface driver, as evolved from hd.c.
- * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15).
- * There can be up to two drives per interface, as per the ATA-2 spec.
- *
- * Primary i/f:    ide0: major=3;  (hda)         minor=0; (hdb)         minor=64
- * Secondary i/f:  ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64
- * Tertiary i/f:   ide2: major=33; (hde)         minor=0; (hdf)         minor=64
- * Quaternary i/f: ide3: major=34; (hdg)         minor=0; (hdh)         minor=64
- */
-
 /******************************************************************************
  * IDE driver configuration options (play with these as desired):
  *
@@ -193,11 +182,6 @@ typedef unsigned char	byte;	/* used everywhere */
 #define WAIT_CMD        (10*HZ) /* 10sec  - maximum wait for an IRQ to happen */
 #define WAIT_MIN_SLEEP  (2*HZ/100)      /* 20msec - minimum sleep time */
 
-#define HOST(hwif,chipset)                                      \
-{                                                               \
-        return ((hwif)->chipset == chipset) ? 1 : 0;            \
-}
-
 /*
  * Check for an interrupt and acknowledge the interrupt status
  */
@@ -391,45 +375,6 @@ typedef union {
 } ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
 
 /*
- * ATA-IDE Error Register
- *
- * mark         : Bad address mark
- * tzero        : Couldn't find track 0
- * abrt         : Aborted Command
- * mcr          : Media Change Request
- * id           : ID field not found
- * mce          : Media Change Event
- * ecc          : Uncorrectable ECC error
- * bdd          : dual meaing
- */
-typedef union {
-        unsigned all                    :8;
-        struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                unsigned mark           :1;
-                unsigned tzero          :1;
-                unsigned abrt           :1;
-                unsigned mcr            :1;
-                unsigned id             :1;
-                unsigned mce            :1;
-                unsigned ecc            :1;
-                unsigned bdd            :1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                unsigned bdd            :1;
-                unsigned ecc            :1;
-                unsigned mce            :1;
-                unsigned id             :1;
-                unsigned mcr            :1;
-                unsigned abrt           :1;
-                unsigned tzero          :1;
-                unsigned mark           :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        } b;
-} ata_error_t;
-
-/*
  * ATA-IDE Select Register, aka Device-Head
  *
  * head         : always zeros here
@@ -504,39 +449,6 @@ typedef union {
 } ata_status_t, atapi_status_t;
 
 /*
- * ATA-IDE Control Register
- *
- * bit0         : Should be set to zero
- * nIEN         : device INTRQ to host
- * SRST         : host soft reset bit
- * bit3         : ATA-2 thingy, Should be set to 1
- * reserved456  : Reserved
- * HOB          : 48-bit address ordering, High Ordered Bit
- */
-typedef union {
-        unsigned all                    : 8;
-        struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                unsigned bit0           : 1;
-                unsigned nIEN           : 1;
-                unsigned SRST           : 1;
-                unsigned bit3           : 1;
-                unsigned reserved456    : 3;
-                unsigned HOB            : 1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                unsigned HOB            : 1;
-                unsigned reserved456    : 3;
-                unsigned bit3           : 1;
-                unsigned SRST           : 1;
-                unsigned nIEN           : 1;
-                unsigned bit0           : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        } b;
-} ata_control_t;
-
-/*
  * ATAPI Feature Register
  *
  * dma          : Using DMA or PIO
@@ -618,39 +530,6 @@ typedef union {
 } atapi_error_t;
 
 /*
- * ATAPI floppy Drive Select Register
- *
- * sam_lun      : Logical unit number
- * reserved3    : Reserved
- * drv          : The responding drive will be drive 0 (0) or drive 1 (1)
- * one5         : Should be set to 1
- * reserved6    : Reserved
- * one7         : Should be set to 1
- */
-typedef union {
-        unsigned all                    :8;
-        struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                unsigned sam_lun        :3;
-                unsigned reserved3      :1;
-                unsigned drv            :1;
-                unsigned one5           :1;
-                unsigned reserved6      :1;
-                unsigned one7           :1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                unsigned one7           :1;
-                unsigned reserved6      :1;
-                unsigned one5           :1;
-                unsigned drv            :1;
-                unsigned reserved3      :1;
-                unsigned sam_lun        :3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-        } b;
-} atapi_select_t;
-
-/*
  * Status returned from various ide_ functions
  */
 typedef enum {
@@ -1298,7 +1177,6 @@ extern int ide_spin_wait_hwgroup(ide_drive_t *);
 extern void ide_timer_expiry(unsigned long);
 extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs);
 extern void do_ide_request(request_queue_t *);
-extern void ide_init_subdrivers(void);
 
 void ide_init_disk(struct gendisk *, ide_drive_t *);