Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (59 commits)
  ide-floppy: do not complete rq's prematurely
  ide: be able to build pmac driver without IDE built-in
  ide-pmac: IDE cable detection on Apple PowerBook
  ide: inline SELECT_DRIVE()
  ide: turn selectproc() method into dev_select() method (take 5)
  MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS (take 2)
  ide: move data register access out of tf_{read|load}() methods (take 2)
  ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 2)
  ide-io-std: shorten ide_{in|out}put_data()
  ide: rename IDE_TFLAG_IN_[HOB_]FEATURE
  ide: turn set_irq() method into write_devctl() method
  ide: use ATA_HOB
  ide-disk: use ATA_ERR
  ide: add support for CFA specified transfer modes (take 3)
  ide-iops: only clear DMA words on setting DMA mode
  ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3)
  au1xxx-ide: auide_{in|out}sw() should be static
  ide-floppy: use ide_pio_bytes()
  ide-{floppy,tape}: fix padding for PIO transfers
  ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
  ...

1 files changed, 27 insertions, 29 deletions

diff --git a/include/linux/ide.h b/include/linux/ide.h
index d5d832271f44..a5d26f66ef78 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -265,7 +265,7 @@ enum {
         IDE_TFLAG_WRITE                 = (1 << 12),
         IDE_TFLAG_CUSTOM_HANDLER        = (1 << 13),
         IDE_TFLAG_DMA_PIO_FALLBACK      = (1 << 14),
-        IDE_TFLAG_IN_HOB_FEATURE        = (1 << 15),
+        IDE_TFLAG_IN_HOB_ERROR          = (1 << 15),
         IDE_TFLAG_IN_HOB_NSECT          = (1 << 16),
         IDE_TFLAG_IN_HOB_LBAL           = (1 << 17),
         IDE_TFLAG_IN_HOB_LBAM           = (1 << 18),
@@ -273,10 +273,10 @@ enum {
         IDE_TFLAG_IN_HOB_LBA            = IDE_TFLAG_IN_HOB_LBAL |
                                           IDE_TFLAG_IN_HOB_LBAM |
                                           IDE_TFLAG_IN_HOB_LBAH,
-        IDE_TFLAG_IN_HOB                = IDE_TFLAG_IN_HOB_FEATURE |
+        IDE_TFLAG_IN_HOB                = IDE_TFLAG_IN_HOB_ERROR |
                                           IDE_TFLAG_IN_HOB_NSECT |
                                           IDE_TFLAG_IN_HOB_LBA,
-        IDE_TFLAG_IN_FEATURE            = (1 << 20),
+        IDE_TFLAG_IN_ERROR              = (1 << 20),
         IDE_TFLAG_IN_NSECT              = (1 << 21),
         IDE_TFLAG_IN_LBAL               = (1 << 22),
         IDE_TFLAG_IN_LBAM               = (1 << 23),
@@ -310,8 +310,12 @@ enum {
 
 struct ide_taskfile {
         u8      hob_data;       /*  0: high data byte (for TASKFILE IOCTL) */
+                                /*  1-5: additional data to support LBA48 */
+        union {
+                u8 hob_error;   /*   read: error */
+                u8 hob_feature; /*  write: feature */
+        };
 
-        u8      hob_feature;    /*  1-5: additional data to support LBA48 */
         u8      hob_nsect;
         u8      hob_lbal;
         u8      hob_lbam;
@@ -352,6 +356,8 @@ struct ide_cmd {
 
         unsigned int            nbytes;
         unsigned int            nleft;
+        unsigned int            last_xfer_len;
+
         struct scatterlist      *cursg;
         unsigned int            cursg_ofs;
 
@@ -375,7 +381,7 @@ enum {
  * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
  * This is used for several packet commands (not for READ/WRITE commands).
  */
-#define IDE_PC_BUFFER_SIZE      256
+#define IDE_PC_BUFFER_SIZE      64
 #define ATAPI_WAIT_PC           (60 * HZ)
 
 struct ide_atapi_pc {
@@ -413,9 +419,6 @@ struct ide_atapi_pc {
         struct idetape_bh *bh;
         char *b_data;
 
-        struct scatterlist *sg;
-        unsigned int sg_cnt;
-
         unsigned long timeout;
 };
 
@@ -456,11 +459,6 @@ enum {
         IDE_AFLAG_TOCADDR_AS_BCD        = (1 << 3),
         /* TOC track numbers are in BCD. */
         IDE_AFLAG_TOCTRACKS_AS_BCD      = (1 << 4),
-        /*
-         * Drive does not provide data in multiples of SECTOR_SIZE
-         * when more than one interrupt is needed.
-         */
-        IDE_AFLAG_LIMIT_NFRAMES         = (1 << 5),
         /* Saved TOC information is current. */
         IDE_AFLAG_TOC_VALID             = (1 << 6),
         /* We think that the drive door is locked. */
@@ -605,7 +603,7 @@ struct ide_drive_s {
 
         unsigned int    bios_cyl;       /* BIOS/fdisk/LILO number of cyls */
         unsigned int    cyl;            /* "real" number of cyls */
-        unsigned int    drive_data;     /* used by set_pio_mode/selectproc */
+        unsigned int    drive_data;     /* used by set_pio_mode/dev_select() */
         unsigned int    failures;       /* current failure count */
         unsigned int    max_failures;   /* maximum allowed failure count */
         u64             probed_capacity;/* initial reported media capacity (ide-cd only currently) */
@@ -661,9 +659,9 @@ struct ide_tp_ops {
         void    (*exec_command)(struct hwif_s *, u8);
         u8      (*read_status)(struct hwif_s *);
         u8      (*read_altstatus)(struct hwif_s *);
+        void    (*write_devctl)(struct hwif_s *, u8);
 
-        void    (*set_irq)(struct hwif_s *, int);
-
+        void    (*dev_select)(ide_drive_t *);
         void    (*tf_load)(ide_drive_t *, struct ide_cmd *);
         void    (*tf_read)(ide_drive_t *, struct ide_cmd *);
 
@@ -681,7 +679,6 @@ extern const struct ide_tp_ops default_tp_ops;
  * @init_dev:           host specific initialization of a device
  * @set_pio_mode:       routine to program host for PIO mode
  * @set_dma_mode:       routine to program host for DMA mode
- * @selectproc:         tweaks hardware to select drive
  * @reset_poll:         chipset polling based on hba specifics
  * @pre_reset:          chipset specific changes to default for device-hba resets
  * @resetproc:          routine to reset controller after a disk reset
@@ -698,7 +695,6 @@ struct ide_port_ops {
         void    (*init_dev)(ide_drive_t *);
         void    (*set_pio_mode)(ide_drive_t *, const u8);
         void    (*set_dma_mode)(ide_drive_t *, const u8);
-        void    (*selectproc)(ide_drive_t *);
         int     (*reset_poll)(ide_drive_t *);
         void    (*pre_reset)(ide_drive_t *);
         void    (*resetproc)(ide_drive_t *);
@@ -719,8 +715,10 @@ struct ide_dma_ops {
         int     (*dma_end)(struct ide_drive_s *);
         int     (*dma_test_irq)(struct ide_drive_s *);
         void    (*dma_lost_irq)(struct ide_drive_s *);
+        /* below ones are optional */
+        int     (*dma_check)(struct ide_drive_s *, struct ide_cmd *);
         int     (*dma_timer_expiry)(struct ide_drive_s *);
-        void    (*dma_timeout)(struct ide_drive_s *);
+        void    (*dma_clear)(struct ide_drive_s *);
         /*
          * The following method is optional and only required to be
          * implemented for the SFF-8038i compatible controllers.
@@ -1169,18 +1167,15 @@ void ide_tf_dump(const char *, struct ide_taskfile *);
 void ide_exec_command(ide_hwif_t *, u8);
 u8 ide_read_status(ide_hwif_t *);
 u8 ide_read_altstatus(ide_hwif_t *);
+void ide_write_devctl(ide_hwif_t *, u8);
 
-void ide_set_irq(ide_hwif_t *, int);
-
+void ide_dev_select(ide_drive_t *);
 void ide_tf_load(ide_drive_t *, struct ide_cmd *);
 void ide_tf_read(ide_drive_t *, struct ide_cmd *);
 
 void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
 void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
 
-int ide_io_buffers(ide_drive_t *, struct ide_atapi_pc *, unsigned int, int);
-
-extern void SELECT_DRIVE(ide_drive_t *);
 void SELECT_MASK(ide_drive_t *, int);
 
 u8 ide_read_error(ide_drive_t *);
@@ -1226,6 +1221,8 @@ ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *);
 
 ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
 
+void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
+
 void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
 
 int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
@@ -1443,8 +1440,8 @@ ide_startstop_t ide_dma_intr(ide_drive_t *);
 int ide_allocate_dma_engine(ide_hwif_t *);
 void ide_release_dma_engine(ide_hwif_t *);
 
-int ide_build_sglist(ide_drive_t *, struct ide_cmd *);
-void ide_destroy_dmatable(ide_drive_t *);
+int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
+void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
 int config_drive_for_dma(ide_drive_t *);
@@ -1462,7 +1459,6 @@ static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
 
 void ide_dma_lost_irq(ide_drive_t *);
-void ide_dma_timeout(ide_drive_t *);
 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
 
 #else
@@ -1478,8 +1474,10 @@ static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
 static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
 static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
-static inline int ide_build_sglist(ide_drive_t *drive,
-                                   struct ide_cmd *cmd) { return 0; }
+static inline int ide_dma_prepare(ide_drive_t *drive,
+                                  struct ide_cmd *cmd) { return 1; }
+static inline void ide_dma_unmap_sg(ide_drive_t *drive,
+                                    struct ide_cmd *cmd) { ; }
 #endif /* CONFIG_BLK_DEV_IDEDMA */
 
 #ifdef CONFIG_BLK_DEV_IDEACPI