UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

1 files changed, 0 insertions, 239 deletions

diff --git a/include/linux/wimax.h b/include/linux/wimax.h
deleted file mode 100644
index 9f6b77af2f6d..000000000000
--- a/include/linux/wimax.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Linux WiMax
- * API for user space
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *  - Initial implementation
- *
- *
- * This file declares the user/kernel protocol that is spoken over
- * Generic Netlink, as well as any type declaration that is to be used
- * by kernel and user space.
- *
- * It is intended for user space to clone it verbatim to use it as a
- * primary reference for definitions.
- *
- * Stuff intended for kernel usage as well as full protocol and stack
- * documentation is rooted in include/net/wimax.h.
- */
-
-#ifndef __LINUX__WIMAX_H__
-#define __LINUX__WIMAX_H__
-
-#include <linux/types.h>
-
-enum {
-        /**
-         * Version of the interface (unsigned decimal, MMm, max 25.5)
-         * M - Major: change if removing or modifying an existing call.
-         * m - minor: change when adding a new call
-         */
-        WIMAX_GNL_VERSION = 01,
-        /* Generic NetLink attributes */
-        WIMAX_GNL_ATTR_INVALID = 0x00,
-        WIMAX_GNL_ATTR_MAX = 10,
-};
-
-
-/*
- * Generic NetLink operations
- *
- * Most of these map to an API call; _OP_ stands for operation, _RP_
- * for reply and _RE_ for report (aka: signal).
- */
-enum {
-        WIMAX_GNL_OP_MSG_FROM_USER,     /* User to kernel message */
-        WIMAX_GNL_OP_MSG_TO_USER,       /* Kernel to user message */
-        WIMAX_GNL_OP_RFKILL,    /* Run wimax_rfkill() */
-        WIMAX_GNL_OP_RESET,     /* Run wimax_rfkill() */
-        WIMAX_GNL_RE_STATE_CHANGE,      /* Report: status change */
-        WIMAX_GNL_OP_STATE_GET,         /* Request for current state */
-};
-
-
-/* Message from user / to user */
-enum {
-        WIMAX_GNL_MSG_IFIDX = 1,
-        WIMAX_GNL_MSG_PIPE_NAME,
-        WIMAX_GNL_MSG_DATA,
-};
-
-
-/*
- * wimax_rfkill()
- *
- * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's
- * switch state (DISABLED/ENABLED).
- */
-enum wimax_rf_state {
-        WIMAX_RF_OFF = 0,       /* Radio is off, rfkill on/enabled */
-        WIMAX_RF_ON = 1,        /* Radio is on, rfkill off/disabled */
-        WIMAX_RF_QUERY = 2,
-};
-
-/* Attributes */
-enum {
-        WIMAX_GNL_RFKILL_IFIDX = 1,
-        WIMAX_GNL_RFKILL_STATE,
-};
-
-
-/* Attributes for wimax_reset() */
-enum {
-        WIMAX_GNL_RESET_IFIDX = 1,
-};
-
-/* Attributes for wimax_state_get() */
-enum {
-        WIMAX_GNL_STGET_IFIDX = 1,
-};
-
-/*
- * Attributes for the Report State Change
- *
- * For now we just have the old and new states; new attributes might
- * be added later on.
- */
-enum {
-        WIMAX_GNL_STCH_IFIDX = 1,
-        WIMAX_GNL_STCH_STATE_OLD,
-        WIMAX_GNL_STCH_STATE_NEW,
-};
-
-
-/**
- * enum wimax_st - The different states of a WiMAX device
- * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed,
- *     but still wimax_dev_add() hasn't been called. There is no state.
- *
- * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and
- *     networking stacks, but it is not initialized (normally that is
- *     done with 'ifconfig DEV up' [or equivalent], which can upload
- *     firmware and enable communications with the device).
- *     In this state, the device is powered down and using as less
- *     power as possible.
- *     This state is the default after a call to wimax_dev_add(). It
- *     is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED
- *     or %WIMAX_ST_RADIO_OFF in _probe() after the call to
- *     wimax_dev_add().
- *     It is recommended that the driver leaves this state when
- *     calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV
- *     down'.
- *
- * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API
- *     operations are allowed to proceed except the ones needed to
- *     complete the device clean up process.
- *
- * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device
- *     is setup, but the device still requires some configuration
- *     before being operational.
- *     Some WiMAX API calls might work.
- *
- * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether
- *     by hardware or software switches).
- *     It is recommended to always leave the device in this state
- *     after initialization.
- *
- * @WIMAX_ST_READY: The device is fully up and radio is on.
- *
- * @WIMAX_ST_SCANNING: [optional] The device has been instructed to
- *     scan. In this state, the device cannot be actively connected to
- *     a network.
- *
- * @WIMAX_ST_CONNECTING: The device is connecting to a network. This
- *     state exists because in some devices, the connect process can
- *     include a number of negotiations between user space, kernel
- *     space and the device. User space needs to know what the device
- *     is doing. If the connect sequence in a device is atomic and
- *     fast, the device can transition directly to CONNECTED
- *
- * @WIMAX_ST_CONNECTED: The device is connected to a network.
- *
- * @__WIMAX_ST_INVALID: This is an invalid state used to mark the
- *     maximum numeric value of states.
- *
- * Description:
- *
- * Transitions from one state to another one are atomic and can only
- * be caused in kernel space with wimax_state_change(). To read the
- * state, use wimax_state_get().
- *
- * States starting with __ are internal and shall not be used or
- * referred to by drivers or userspace. They look ugly, but that's the
- * point -- if any use is made non-internal to the stack, it is easier
- * to catch on review.
- *
- * All API operations [with well defined exceptions] will take the
- * device mutex before starting and then check the state. If the state
- * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or
- * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with
- * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN.
- *
- * The order of the definitions is important, so we can do numerical
- * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready
- * to operate).
- */
-/*
- * The allowed state transitions are described in the table below
- * (states in rows can go to states in columns where there is an X):
- *
- *                                  UNINI   RADIO READY SCAN CONNEC CONNEC
- *             NULL DOWN QUIESCING TIALIZED  OFF        NING  TING   TED
- * NULL         -    x
- * DOWN              -      x        x       x
- * QUIESCING         x      -
- * UNINITIALIZED            x        -       x
- * RADIO_OFF                x                -     x
- * READY                    x                x     -     x     x      x
- * SCANNING                 x                x     x     -     x      x
- * CONNECTING               x                x     x     x     -      x
- * CONNECTED                x                x     x                  -
- *
- * This table not available in kernel-doc because the formatting messes it up.
- */
- enum wimax_st {
-        __WIMAX_ST_NULL = 0,
-        WIMAX_ST_DOWN,
-        __WIMAX_ST_QUIESCING,
-        WIMAX_ST_UNINITIALIZED,
-        WIMAX_ST_RADIO_OFF,
-        WIMAX_ST_READY,
-        WIMAX_ST_SCANNING,
-        WIMAX_ST_CONNECTING,
-        WIMAX_ST_CONNECTED,
-        __WIMAX_ST_INVALID                      /* Always keep last */
-};
-
-
-#endif /* #ifndef __LINUX__WIMAX_H__ */