Merge branch 'spi' of git://git.linutronix.de/users/bigeasy/soda into spi/next

* 'spi' of git://git.linutronix.de/users/bigeasy/soda into spi/next
  spi/pxa2xx: register driver properly
  spi/pxa2xx: add support for shared IRQ handler
  spi/pxa2xx: Use define for SSSR_TFL_MASK instead of plain numbers
  arm/pxa2xx: reorgazine SSP and SPI header files
  spi/pxa2xx: Add CE4100 support
  spi/pxa2xx: Consider CE4100's FIFO depth
  spi/pxa2xx: Add chipselect support for Sodaville
  spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.
  spi/pxa2xx: pass of_node to spi device and set a parent device

1 files changed, 152 insertions, 0 deletions

diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
new file mode 100644
index 000000000000..d3e1075f7b60
--- /dev/null
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __linux_pxa2xx_spi_h
+#define __linux_pxa2xx_spi_h
+
+#include <linux/pxa2xx_ssp.h>
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+        u32 clock_enable;
+        u16 num_chipselect;
+        u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+        u8 tx_threshold;
+        u8 rx_threshold;
+        u8 dma_burst_size;
+        u32 timeout;
+        u8 enable_loopback;
+        int gpio_cs;
+        void (*cs_control)(u32 command);
+};
+
+#ifdef CONFIG_ARCH_PXA
+
+#include <linux/clk.h>
+#include <mach/dma.h>
+
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
+#else
+/*
+ * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or
+ * plat/ include path.
+ * The CE4100 does not provide DMA support. This bits are here to let the driver
+ * compile and will never be used. Maybe we get DMA support at a later point in
+ * time.
+ */
+
+#define DCSR(n)         (n)
+#define DSADR(n)        (n)
+#define DTADR(n)        (n)
+#define DCMD(n)         (n)
+#define DRCMR(n)        (n)
+
+#define DCSR_RUN        (1 << 31)       /* Run Bit */
+#define DCSR_NODESC     (1 << 30)       /* No-Descriptor Fetch */
+#define DCSR_STOPIRQEN  (1 << 29)       /* Stop Interrupt Enable */
+#define DCSR_REQPEND    (1 << 8)        /* Request Pending (read-only) */
+#define DCSR_STOPSTATE  (1 << 3)        /* Stop State (read-only) */
+#define DCSR_ENDINTR    (1 << 2)        /* End Interrupt */
+#define DCSR_STARTINTR  (1 << 1)        /* Start Interrupt */
+#define DCSR_BUSERR     (1 << 0)        /* Bus Error Interrupt */
+
+#define DCSR_EORIRQEN   (1 << 28)       /* End of Receive Interrupt Enable */
+#define DCSR_EORJMPEN   (1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN  (1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST   (1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST   (1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST      (1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR    (1 << 9)        /* The end of Receive */
+
+#define DRCMR_MAPVLD    (1 << 7)        /* Map Valid */
+#define DRCMR_CHLNUM    0x1f            /* mask for Channel Number */
+
+#define DDADR_DESCADDR  0xfffffff0      /* Address of next descriptor */
+#define DDADR_STOP      (1 << 0)        /* Stop */
+
+#define DCMD_INCSRCADDR (1 << 31)       /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30)       /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC    (1 << 29)       /* Flow Control by the source. */
+#define DCMD_FLOWTRG    (1 << 28)       /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22)       /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN   (1 << 21)       /* End Interrupt Enable */
+#define DCMD_ENDIAN     (1 << 18)       /* Device Endian-ness. */
+#define DCMD_BURST8     (1 << 16)       /* 8 byte burst */
+#define DCMD_BURST16    (2 << 16)       /* 16 byte burst */
+#define DCMD_BURST32    (3 << 16)       /* 32 byte burst */
+#define DCMD_WIDTH1     (1 << 14)       /* 1 byte width */
+#define DCMD_WIDTH2     (2 << 14)       /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4     (3 << 14)       /* 4 byte width (Word) */
+#define DCMD_LENGTH     0x01fff         /* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef enum {
+        DMA_PRIO_HIGH = 0,
+        DMA_PRIO_MEDIUM = 1,
+        DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+static inline int pxa_request_dma(char *name,
+                pxa_dma_prio prio,
+                void (*irq_handler)(int, void *),
+                void *data)
+{
+        return -ENODEV;
+}
+
+static inline void pxa_free_dma(int dma_ch)
+{
+}
+
+/*
+ * The CE4100 does not have the clk framework implemented and SPI clock can
+ * not be switched on/off or the divider changed.
+ */
+static inline void clk_disable(struct clk *clk)
+{
+}
+
+static inline int clk_enable(struct clk *clk)
+{
+        return 0;
+}
+
+static inline unsigned long clk_get_rate(struct clk *clk)
+{
+        return 3686400;
+}
+
+#endif
+#endif