Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 533 insertions, 0 deletions

diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h
new file mode 100644
index 000000000000..7ca35abad387
--- /dev/null
+++ b/include/linux/sc26198.h
@@ -0,0 +1,533 @@
+/*****************************************************************************/
+
+/*
+ *      sc26198.h  -- SC26198 UART hardware info.
+ *
+ *      Copyright (C) 1995-1998  Stallion Technologies
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef _SC26198_H
+#define _SC26198_H
+/*****************************************************************************/
+
+/*
+ *      Define the number of async ports per sc26198 uart device.
+ */
+#define SC26198_PORTS           8
+
+/*
+ *      Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
+ */
+#define SC26198_MASTERCLOCK     14745600L
+#define SC26198_DCLK            (SC26198_MASTERCLOCK)
+#define SC26198_CCLK            (SC26198_MASTERCLOCK / 2)
+#define SC26198_BCLK            (SC26198_MASTERCLOCK / 4)
+
+/*
+ *      Define internal FIFO sizes for the 26198 ports.
+ */
+#define SC26198_TXFIFOSIZE      16
+#define SC26198_RXFIFOSIZE      16
+
+/*****************************************************************************/
+
+/*
+ *      Global register definitions. These registers are global to each 26198
+ *      device, not specific ports on it.
+ */
+#define TSTR            0x0d
+#define GCCR            0x0f
+#define ICR             0x1b
+#define WDTRCR          0x1d
+#define IVR             0x1f
+#define BRGTRUA         0x84
+#define GPOSR           0x87
+#define GPOC            0x8b
+#define UCIR            0x8c
+#define CIR             0x8c
+#define BRGTRUB         0x8d
+#define GRXFIFO         0x8e
+#define GTXFIFO         0x8e
+#define GCCR2           0x8f
+#define BRGTRLA         0x94
+#define GPOR            0x97
+#define GPOD            0x9b
+#define BRGTCR          0x9c
+#define GICR            0x9c
+#define BRGTRLB         0x9d
+#define GIBCR           0x9d
+#define GITR            0x9f
+
+/*
+ *      Per port channel registers. These are the register offsets within
+ *      the port address space, so need to have the port address (0 to 7)
+ *      inserted in bit positions 4:6.
+ */
+#define MR0             0x00
+#define MR1             0x01
+#define IOPCR           0x02
+#define BCRBRK          0x03
+#define BCRCOS          0x04
+#define BCRX            0x06
+#define BCRA            0x07
+#define XONCR           0x08
+#define XOFFCR          0x09
+#define ARCR            0x0a
+#define RXCSR           0x0c
+#define TXCSR           0x0e
+#define MR2             0x80
+#define SR              0x81
+#define SCCR            0x81
+#define ISR             0x82
+#define IMR             0x82
+#define TXFIFO          0x83
+#define RXFIFO          0x83
+#define IPR             0x84
+#define IOPIOR          0x85
+#define XISR            0x86
+
+/*
+ *      For any given port calculate the address to use to access a specified
+ *      register. This is only used for unusual access, mostly this is done
+ *      through the assembler access routines.
+ */
+#define SC26198_PORTREG(port,reg)       ((((port) & 0x07) << 4) | (reg))
+
+/*****************************************************************************/
+
+/*
+ *      Global configuration control register bit definitions.
+ */
+#define GCCR_NOACK              0x00
+#define GCCR_IVRACK             0x02
+#define GCCR_IVRCHANACK         0x04
+#define GCCR_IVRTYPCHANACK      0x06
+#define GCCR_ASYNCCYCLE         0x00
+#define GCCR_SYNCCYCLE          0x40
+
+/*****************************************************************************/
+
+/*
+ *      Mode register 0 bit definitions.
+ */
+#define MR0_ADDRNONE            0x00
+#define MR0_AUTOWAKE            0x01
+#define MR0_AUTODOZE            0x02
+#define MR0_AUTOWAKEDOZE        0x03
+#define MR0_SWFNONE             0x00
+#define MR0_SWFTX               0x04
+#define MR0_SWFRX               0x08
+#define MR0_SWFRXTX             0x0c
+#define MR0_TXMASK              0x30
+#define MR0_TXEMPTY             0x00
+#define MR0_TXHIGH              0x10
+#define MR0_TXHALF              0x20
+#define MR0_TXRDY               0x00
+#define MR0_ADDRNT              0x00
+#define MR0_ADDRT               0x40
+#define MR0_SWFNT               0x00
+#define MR0_SWFT                0x80
+
+/*
+ *      Mode register 1 bit definitions.
+ */
+#define MR1_CS5                 0x00
+#define MR1_CS6                 0x01
+#define MR1_CS7                 0x02
+#define MR1_CS8                 0x03
+#define MR1_PAREVEN             0x00
+#define MR1_PARODD              0x04
+#define MR1_PARENB              0x00
+#define MR1_PARFORCE            0x08
+#define MR1_PARNONE             0x10
+#define MR1_PARSPECIAL          0x18
+#define MR1_ERRCHAR             0x00
+#define MR1_ERRBLOCK            0x20
+#define MR1_ISRUNMASKED         0x00
+#define MR1_ISRMASKED           0x40
+#define MR1_AUTORTS             0x80
+
+/*
+ *      Mode register 2 bit definitions.
+ */
+#define MR2_STOP1               0x00
+#define MR2_STOP15              0x01
+#define MR2_STOP2               0x02
+#define MR2_STOP916             0x03
+#define MR2_RXFIFORDY           0x00
+#define MR2_RXFIFOHALF          0x04
+#define MR2_RXFIFOHIGH          0x08
+#define MR2_RXFIFOFULL          0x0c
+#define MR2_AUTOCTS             0x10
+#define MR2_TXRTS               0x20
+#define MR2_MODENORM            0x00
+#define MR2_MODEAUTOECHO        0x40
+#define MR2_MODELOOP            0x80
+#define MR2_MODEREMECHO         0xc0
+
+/*****************************************************************************/
+
+/*
+ *      Baud Rate Generator (BRG) selector values.
+ */
+#define BRG_50                  0x00
+#define BRG_75                  0x01
+#define BRG_150                 0x02
+#define BRG_200                 0x03
+#define BRG_300                 0x04
+#define BRG_450                 0x05
+#define BRG_600                 0x06
+#define BRG_900                 0x07
+#define BRG_1200                0x08
+#define BRG_1800                0x09
+#define BRG_2400                0x0a
+#define BRG_3600                0x0b
+#define BRG_4800                0x0c
+#define BRG_7200                0x0d
+#define BRG_9600                0x0e
+#define BRG_14400               0x0f
+#define BRG_19200               0x10
+#define BRG_28200               0x11
+#define BRG_38400               0x12
+#define BRG_57600               0x13
+#define BRG_115200              0x14
+#define BRG_230400              0x15
+#define BRG_GIN0                0x16
+#define BRG_GIN1                0x17
+#define BRG_CT0                 0x18
+#define BRG_CT1                 0x19
+#define BRG_RX2TX316            0x1b
+#define BRG_RX2TX31             0x1c
+
+#define SC26198_MAXBAUD         921600
+
+/*****************************************************************************/
+
+/*
+ *      Command register command definitions.
+ */
+#define CR_NULL                 0x04
+#define CR_ADDRNORMAL           0x0c
+#define CR_RXRESET              0x14
+#define CR_TXRESET              0x1c
+#define CR_CLEARRXERR           0x24
+#define CR_BREAKRESET           0x2c
+#define CR_TXSTARTBREAK         0x34
+#define CR_TXSTOPBREAK          0x3c
+#define CR_RTSON                0x44
+#define CR_RTSOFF               0x4c
+#define CR_ADDRINIT             0x5c
+#define CR_RXERRBLOCK           0x6c
+#define CR_TXSENDXON            0x84
+#define CR_TXSENDXOFF           0x8c
+#define CR_GANGXONSET           0x94
+#define CR_GANGXOFFSET          0x9c
+#define CR_GANGXONINIT          0xa4
+#define CR_GANGXOFFINIT         0xac
+#define CR_HOSTXON              0xb4
+#define CR_HOSTXOFF             0xbc
+#define CR_CANCELXOFF           0xc4
+#define CR_ADDRRESET            0xdc
+#define CR_RESETALLPORTS        0xf4
+#define CR_RESETALL             0xfc
+
+#define CR_RXENABLE             0x01
+#define CR_TXENABLE             0x02
+
+/*****************************************************************************/
+
+/*
+ *      Channel status register.
+ */
+#define SR_RXRDY                0x01
+#define SR_RXFULL               0x02
+#define SR_TXRDY                0x04
+#define SR_TXEMPTY              0x08
+#define SR_RXOVERRUN            0x10
+#define SR_RXPARITY             0x20
+#define SR_RXFRAMING            0x40
+#define SR_RXBREAK              0x80
+
+#define SR_RXERRS               (SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
+
+/*****************************************************************************/
+
+/*
+ *      Interrupt status register and interrupt mask register bit definitions.
+ */
+#define IR_TXRDY                0x01
+#define IR_RXRDY                0x02
+#define IR_RXBREAK              0x04
+#define IR_XONXOFF              0x10
+#define IR_ADDRRECOG            0x20
+#define IR_RXWATCHDOG           0x40
+#define IR_IOPORT               0x80
+
+/*****************************************************************************/
+
+/*
+ *      Interrupt vector register field definitions.
+ */
+#define IVR_CHANMASK            0x07
+#define IVR_TYPEMASK            0x18
+#define IVR_CONSTMASK           0xc0
+
+#define IVR_RXDATA              0x10
+#define IVR_RXBADDATA           0x18
+#define IVR_TXDATA              0x08
+#define IVR_OTHER               0x00
+
+/*****************************************************************************/
+
+/*
+ *      BRG timer control register bit definitions.
+ */
+#define BRGCTCR_DISABCLK0       0x00
+#define BRGCTCR_ENABCLK0        0x08
+#define BRGCTCR_DISABCLK1       0x00
+#define BRGCTCR_ENABCLK1        0x80
+
+#define BRGCTCR_0SCLK16         0x00
+#define BRGCTCR_0SCLK32         0x01
+#define BRGCTCR_0SCLK64         0x02
+#define BRGCTCR_0SCLK128        0x03
+#define BRGCTCR_0X1             0x04
+#define BRGCTCR_0X12            0x05
+#define BRGCTCR_0IO1A           0x06
+#define BRGCTCR_0GIN0           0x07
+
+#define BRGCTCR_1SCLK16         0x00
+#define BRGCTCR_1SCLK32         0x10
+#define BRGCTCR_1SCLK64         0x20
+#define BRGCTCR_1SCLK128        0x30
+#define BRGCTCR_1X1             0x40
+#define BRGCTCR_1X12            0x50
+#define BRGCTCR_1IO1B           0x60
+#define BRGCTCR_1GIN1           0x70
+
+/*****************************************************************************/
+
+/*
+ *      Watch dog timer enable register.
+ */
+#define WDTRCR_ENABALL          0xff
+
+/*****************************************************************************/
+
+/*
+ *      XON/XOFF interrupt status register.
+ */
+#define XISR_TXCHARMASK         0x03
+#define XISR_TXCHARNORMAL       0x00
+#define XISR_TXWAIT             0x01
+#define XISR_TXXOFFPEND         0x02
+#define XISR_TXXONPEND          0x03
+
+#define XISR_TXFLOWMASK         0x0c
+#define XISR_TXNORMAL           0x00
+#define XISR_TXSTOPPEND         0x04
+#define XISR_TXSTARTED          0x08
+#define XISR_TXSTOPPED          0x0c
+
+#define XISR_RXFLOWMASK         0x30
+#define XISR_RXFLOWNONE         0x00
+#define XISR_RXXONSENT          0x10
+#define XISR_RXXOFFSENT         0x20
+
+#define XISR_RXXONGOT           0x40
+#define XISR_RXXOFFGOT          0x80
+
+/*****************************************************************************/
+
+/*
+ *      Current interrupt register.
+ */
+#define CIR_TYPEMASK            0xc0
+#define CIR_TYPEOTHER           0x00
+#define CIR_TYPETX              0x40
+#define CIR_TYPERXGOOD          0x80
+#define CIR_TYPERXBAD           0xc0
+
+#define CIR_RXDATA              0x80
+#define CIR_RXBADDATA           0x40
+#define CIR_TXDATA              0x40
+
+#define CIR_CHANMASK            0x07
+#define CIR_CNTMASK             0x38
+
+#define CIR_SUBTYPEMASK         0x38
+#define CIR_SUBNONE             0x00
+#define CIR_SUBCOS              0x08
+#define CIR_SUBADDR             0x10
+#define CIR_SUBXONXOFF          0x18
+#define CIR_SUBBREAK            0x28
+
+/*****************************************************************************/
+
+/*
+ *      Global interrupting channel register.
+ */
+#define GICR_CHANMASK           0x07
+
+/*****************************************************************************/
+
+/*
+ *      Global interrupting byte count register.
+ */
+#define GICR_COUNTMASK          0x0f
+
+/*****************************************************************************/
+
+/*
+ *      Global interrupting type register.
+ */
+#define GITR_RXMASK             0xc0
+#define GITR_RXNONE             0x00
+#define GITR_RXBADDATA          0x80
+#define GITR_RXGOODDATA         0xc0
+#define GITR_TXDATA             0x20
+
+#define GITR_SUBTYPEMASK        0x07
+#define GITR_SUBNONE            0x00
+#define GITR_SUBCOS             0x01
+#define GITR_SUBADDR            0x02
+#define GITR_SUBXONXOFF         0x03
+#define GITR_SUBBREAK           0x05
+
+/*****************************************************************************/
+
+/*
+ *      Input port change register.
+ */
+#define IPR_CTS                 0x01
+#define IPR_DTR                 0x02
+#define IPR_RTS                 0x04
+#define IPR_DCD                 0x08
+#define IPR_CTSCHANGE           0x10
+#define IPR_DTRCHANGE           0x20
+#define IPR_RTSCHANGE           0x40
+#define IPR_DCDCHANGE           0x80
+
+#define IPR_CHANGEMASK          0xf0
+
+/*****************************************************************************/
+
+/*
+ *      IO port interrupt and output register.
+ */
+#define IOPR_CTS                0x01
+#define IOPR_DTR                0x02
+#define IOPR_RTS                0x04
+#define IOPR_DCD                0x08
+#define IOPR_CTSCOS             0x10
+#define IOPR_DTRCOS             0x20
+#define IOPR_RTSCOS             0x40
+#define IOPR_DCDCOS             0x80
+
+/*****************************************************************************/
+
+/*
+ *      IO port configuration register.
+ */
+#define IOPCR_SETCTS            0x00
+#define IOPCR_SETDTR            0x04
+#define IOPCR_SETRTS            0x10
+#define IOPCR_SETDCD            0x00
+
+#define IOPCR_SETSIGS           (IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
+
+/*****************************************************************************/
+
+/*
+ *      General purpose output select register.
+ */
+#define GPORS_TXC1XA            0x08
+#define GPORS_TXC16XA           0x09
+#define GPORS_RXC16XA           0x0a
+#define GPORS_TXC16XB           0x0b
+#define GPORS_GPOR3             0x0c
+#define GPORS_GPOR2             0x0d
+#define GPORS_GPOR1             0x0e
+#define GPORS_GPOR0             0x0f
+
+/*****************************************************************************/
+
+/*
+ *      General purpose output register.
+ */
+#define GPOR_0                  0x01
+#define GPOR_1                  0x02
+#define GPOR_2                  0x04
+#define GPOR_3                  0x08
+
+/*****************************************************************************/
+
+/*
+ *      General purpose output clock register.
+ */
+#define GPORC_0NONE             0x00
+#define GPORC_0GIN0             0x01
+#define GPORC_0GIN1             0x02
+#define GPORC_0IO3A             0x02
+
+#define GPORC_1NONE             0x00
+#define GPORC_1GIN0             0x04
+#define GPORC_1GIN1             0x08
+#define GPORC_1IO3C             0x0c
+
+#define GPORC_2NONE             0x00
+#define GPORC_2GIN0             0x10
+#define GPORC_2GIN1             0x20
+#define GPORC_2IO3E             0x20
+
+#define GPORC_3NONE             0x00
+#define GPORC_3GIN0             0x40
+#define GPORC_3GIN1             0x80
+#define GPORC_3IO3G             0xc0
+
+/*****************************************************************************/
+
+/*
+ *      General purpose output data register.
+ */
+#define GPOD_0MASK              0x03
+#define GPOD_0SET1              0x00
+#define GPOD_0SET0              0x01
+#define GPOD_0SETR0             0x02
+#define GPOD_0SETIO3B           0x03
+
+#define GPOD_1MASK              0x0c
+#define GPOD_1SET1              0x00
+#define GPOD_1SET0              0x04
+#define GPOD_1SETR0             0x08
+#define GPOD_1SETIO3D           0x0c
+
+#define GPOD_2MASK              0x30
+#define GPOD_2SET1              0x00
+#define GPOD_2SET0              0x10
+#define GPOD_2SETR0             0x20
+#define GPOD_2SETIO3F           0x30
+
+#define GPOD_3MASK              0xc0
+#define GPOD_3SET1              0x00
+#define GPOD_3SET0              0x40
+#define GPOD_3SETR0             0x80
+#define GPOD_3SETIO3H           0xc0
+
+/*****************************************************************************/
+#endif