[MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems

 It was obesrved that at least one older PCI card predating the
requirement for the TRDY signal to respond within 16 clock ticks actually
does not meet this rule nor even the power-on defaults of the PCI bridges
found in development systems built around the Broadcom SiByte SOCs.  Here
is a patch that bumps up the timeout to the highest finite value supported
by these chips, which is 255 clock ticks.  The bridges affected are the
SiByte SOC itself and the SP1011.
    
 This change does not effectively affect systems only having PCI option
cards installed that meet the TRDY requirement of the current PCI spec.
The rule was introduced with PCI 2.1, so any older card may make the
system affected.  If this is the case, performance of the system will
suffer in return for the card working at all.  If this is a concern, then
the solution is not to use such cards.
    
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---

1 files changed, 3 insertions, 0 deletions

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c9ffbc3843d5..dc7f573d36e4 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1883,6 +1883,8 @@
 #define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400
 #define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402
 
+#define PCI_VENDOR_ID_SIPACKETS         0x14d9
+#define PCI_DEVICE_ID_SP1011            0x0010
 
 #define PCI_VENDOR_ID_AFAVLAB           0x14db
 #define PCI_DEVICE_ID_AFAVLAB_P028      0x2180
@@ -1997,6 +1999,7 @@
 #define PCI_DEVICE_ID_FARSITE_TE1C      0x1612
 
 #define PCI_VENDOR_ID_SIBYTE            0x166d
+#define PCI_DEVICE_ID_BCM1250_PCI       0x0001
 #define PCI_DEVICE_ID_BCM1250_HT        0x0002
 
 #define PCI_VENDOR_ID_NETCELL           0x169c