Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1067 insertions, 0 deletions

diff --git a/include/linux/pci.h b/include/linux/pci.h
new file mode 100644
index 000000000000..bea13a99e6fb
--- /dev/null
+++ b/include/linux/pci.h
@@ -0,0 +1,1067 @@
+/*
+ *      pci.h
+ *
+ *      PCI defines and function prototypes
+ *      Copyright 1994, Drew Eckhardt
+ *      Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ *      For more information, please consult the following manuals (look at
+ *      http://www.pcisig.com/ for how to get them):
+ *
+ *      PCI BIOS Specification
+ *      PCI Local Bus Specification
+ *      PCI to PCI Bridge Specification
+ *      PCI System Design Guide
+ */
+
+#ifndef LINUX_PCI_H
+#define LINUX_PCI_H
+
+#include <linux/mod_devicetable.h>
+
+/*
+ * Under PCI, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI_VENDOR_ID           0x00    /* 16 bits */
+#define PCI_DEVICE_ID           0x02    /* 16 bits */
+#define PCI_COMMAND             0x04    /* 16 bits */
+#define  PCI_COMMAND_IO         0x1     /* Enable response in I/O space */
+#define  PCI_COMMAND_MEMORY     0x2     /* Enable response in Memory space */
+#define  PCI_COMMAND_MASTER     0x4     /* Enable bus mastering */
+#define  PCI_COMMAND_SPECIAL    0x8     /* Enable response to special cycles */
+#define  PCI_COMMAND_INVALIDATE 0x10    /* Use memory write and invalidate */
+#define  PCI_COMMAND_VGA_PALETTE 0x20   /* Enable palette snooping */
+#define  PCI_COMMAND_PARITY     0x40    /* Enable parity checking */
+#define  PCI_COMMAND_WAIT       0x80    /* Enable address/data stepping */
+#define  PCI_COMMAND_SERR       0x100   /* Enable SERR */
+#define  PCI_COMMAND_FAST_BACK  0x200   /* Enable back-to-back writes */
+#define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
+
+#define PCI_STATUS              0x06    /* 16 bits */
+#define  PCI_STATUS_CAP_LIST    0x10    /* Support Capability List */
+#define  PCI_STATUS_66MHZ       0x20    /* Support 66 Mhz PCI 2.1 bus */
+#define  PCI_STATUS_UDF         0x40    /* Support User Definable Features [obsolete] */
+#define  PCI_STATUS_FAST_BACK   0x80    /* Accept fast-back to back */
+#define  PCI_STATUS_PARITY      0x100   /* Detected parity error */
+#define  PCI_STATUS_DEVSEL_MASK 0x600   /* DEVSEL timing */
+#define  PCI_STATUS_DEVSEL_FAST 0x000   
+#define  PCI_STATUS_DEVSEL_MEDIUM 0x200
+#define  PCI_STATUS_DEVSEL_SLOW 0x400
+#define  PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
+#define  PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
+#define  PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
+#define  PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
+#define  PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
+
+#define PCI_CLASS_REVISION      0x08    /* High 24 bits are class, low 8
+                                           revision */
+#define PCI_REVISION_ID         0x08    /* Revision ID */
+#define PCI_CLASS_PROG          0x09    /* Reg. Level Programming Interface */
+#define PCI_CLASS_DEVICE        0x0a    /* Device class */
+
+#define PCI_CACHE_LINE_SIZE     0x0c    /* 8 bits */
+#define PCI_LATENCY_TIMER       0x0d    /* 8 bits */
+#define PCI_HEADER_TYPE         0x0e    /* 8 bits */
+#define  PCI_HEADER_TYPE_NORMAL 0
+#define  PCI_HEADER_TYPE_BRIDGE 1
+#define  PCI_HEADER_TYPE_CARDBUS 2
+
+#define PCI_BIST                0x0f    /* 8 bits */
+#define  PCI_BIST_CODE_MASK     0x0f    /* Return result */
+#define  PCI_BIST_START         0x40    /* 1 to start BIST, 2 secs or less */
+#define  PCI_BIST_CAPABLE       0x80    /* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of 
+ * 0xffffffff to the register, and reading it back.  Only 
+ * 1 bits are decoded.
+ */
+#define PCI_BASE_ADDRESS_0      0x10    /* 32 bits */
+#define PCI_BASE_ADDRESS_1      0x14    /* 32 bits [htype 0,1 only] */
+#define PCI_BASE_ADDRESS_2      0x18    /* 32 bits [htype 0 only] */
+#define PCI_BASE_ADDRESS_3      0x1c    /* 32 bits */
+#define PCI_BASE_ADDRESS_4      0x20    /* 32 bits */
+#define PCI_BASE_ADDRESS_5      0x24    /* 32 bits */
+#define  PCI_BASE_ADDRESS_SPACE 0x01    /* 0 = memory, 1 = I/O */
+#define  PCI_BASE_ADDRESS_SPACE_IO 0x01
+#define  PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
+#define  PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
+#define  PCI_BASE_ADDRESS_MEM_TYPE_32   0x00    /* 32 bit address */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_1M   0x02    /* Below 1M [obsolete] */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_64   0x04    /* 64 bit address */
+#define  PCI_BASE_ADDRESS_MEM_PREFETCH  0x08    /* prefetchable? */
+#define  PCI_BASE_ADDRESS_MEM_MASK      (~0x0fUL)
+#define  PCI_BASE_ADDRESS_IO_MASK       (~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI_CARDBUS_CIS         0x28
+#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
+#define PCI_SUBSYSTEM_ID        0x2e  
+#define PCI_ROM_ADDRESS         0x30    /* Bits 31..11 are address, 10..1 reserved */
+#define  PCI_ROM_ADDRESS_ENABLE 0x01
+#define PCI_ROM_ADDRESS_MASK    (~0x7ffUL)
+
+#define PCI_CAPABILITY_LIST     0x34    /* Offset of first capability list entry */
+
+/* 0x35-0x3b are reserved */
+#define PCI_INTERRUPT_LINE      0x3c    /* 8 bits */
+#define PCI_INTERRUPT_PIN       0x3d    /* 8 bits */
+#define PCI_MIN_GNT             0x3e    /* 8 bits */
+#define PCI_MAX_LAT             0x3f    /* 8 bits */
+
+/* Header type 1 (PCI-to-PCI bridges) */
+#define PCI_PRIMARY_BUS         0x18    /* Primary bus number */
+#define PCI_SECONDARY_BUS       0x19    /* Secondary bus number */
+#define PCI_SUBORDINATE_BUS     0x1a    /* Highest bus number behind the bridge */
+#define PCI_SEC_LATENCY_TIMER   0x1b    /* Latency timer for secondary interface */
+#define PCI_IO_BASE             0x1c    /* I/O range behind the bridge */
+#define PCI_IO_LIMIT            0x1d
+#define  PCI_IO_RANGE_TYPE_MASK 0x0fUL  /* I/O bridging type */
+#define  PCI_IO_RANGE_TYPE_16   0x00
+#define  PCI_IO_RANGE_TYPE_32   0x01
+#define  PCI_IO_RANGE_MASK      (~0x0fUL)
+#define PCI_SEC_STATUS          0x1e    /* Secondary status register, only bit 14 used */
+#define PCI_MEMORY_BASE         0x20    /* Memory range behind */
+#define PCI_MEMORY_LIMIT        0x22
+#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_MEMORY_RANGE_MASK  (~0x0fUL)
+#define PCI_PREF_MEMORY_BASE    0x24    /* Prefetchable memory range behind */
+#define PCI_PREF_MEMORY_LIMIT   0x26
+#define  PCI_PREF_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_PREF_RANGE_TYPE_32 0x00
+#define  PCI_PREF_RANGE_TYPE_64 0x01
+#define  PCI_PREF_RANGE_MASK    (~0x0fUL)
+#define PCI_PREF_BASE_UPPER32   0x28    /* Upper half of prefetchable memory range */
+#define PCI_PREF_LIMIT_UPPER32  0x2c
+#define PCI_IO_BASE_UPPER16     0x30    /* Upper half of I/O addresses */
+#define PCI_IO_LIMIT_UPPER16    0x32
+/* 0x34 same as for htype 0 */
+/* 0x35-0x3b is reserved */
+#define PCI_ROM_ADDRESS1        0x38    /* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_BRIDGE_CONTROL      0x3e
+#define  PCI_BRIDGE_CTL_PARITY  0x01    /* Enable parity detection on secondary interface */
+#define  PCI_BRIDGE_CTL_SERR    0x02    /* The same for SERR forwarding */
+#define  PCI_BRIDGE_CTL_NO_ISA  0x04    /* Disable bridging of ISA ports */
+#define  PCI_BRIDGE_CTL_VGA     0x08    /* Forward VGA addresses */
+#define  PCI_BRIDGE_CTL_MASTER_ABORT 0x20  /* Report master aborts */
+#define  PCI_BRIDGE_CTL_BUS_RESET 0x40  /* Secondary bus reset */
+#define  PCI_BRIDGE_CTL_FAST_BACK 0x80  /* Fast Back2Back enabled on secondary interface */
+
+/* Header type 2 (CardBus bridges) */
+#define PCI_CB_CAPABILITY_LIST  0x14
+/* 0x15 reserved */
+#define PCI_CB_SEC_STATUS       0x16    /* Secondary status */
+#define PCI_CB_PRIMARY_BUS      0x18    /* PCI bus number */
+#define PCI_CB_CARD_BUS         0x19    /* CardBus bus number */
+#define PCI_CB_SUBORDINATE_BUS  0x1a    /* Subordinate bus number */
+#define PCI_CB_LATENCY_TIMER    0x1b    /* CardBus latency timer */
+#define PCI_CB_MEMORY_BASE_0    0x1c
+#define PCI_CB_MEMORY_LIMIT_0   0x20
+#define PCI_CB_MEMORY_BASE_1    0x24
+#define PCI_CB_MEMORY_LIMIT_1   0x28
+#define PCI_CB_IO_BASE_0        0x2c
+#define PCI_CB_IO_BASE_0_HI     0x2e
+#define PCI_CB_IO_LIMIT_0       0x30
+#define PCI_CB_IO_LIMIT_0_HI    0x32
+#define PCI_CB_IO_BASE_1        0x34
+#define PCI_CB_IO_BASE_1_HI     0x36
+#define PCI_CB_IO_LIMIT_1       0x38
+#define PCI_CB_IO_LIMIT_1_HI    0x3a
+#define  PCI_CB_IO_RANGE_MASK   (~0x03UL)
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_CB_BRIDGE_CONTROL   0x3e
+#define  PCI_CB_BRIDGE_CTL_PARITY       0x01    /* Similar to standard bridge control register */
+#define  PCI_CB_BRIDGE_CTL_SERR         0x02
+#define  PCI_CB_BRIDGE_CTL_ISA          0x04
+#define  PCI_CB_BRIDGE_CTL_VGA          0x08
+#define  PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20
+#define  PCI_CB_BRIDGE_CTL_CB_RESET     0x40    /* CardBus reset */
+#define  PCI_CB_BRIDGE_CTL_16BIT_INT    0x80    /* Enable interrupt for 16-bit cards */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100  /* Prefetch enable for both memory regions */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
+#define  PCI_CB_BRIDGE_CTL_POST_WRITES  0x400
+#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
+#define PCI_CB_SUBSYSTEM_ID     0x42
+#define PCI_CB_LEGACY_MODE_BASE 0x44    /* 16-bit PC Card legacy mode base address (ExCa) */
+/* 0x48-0x7f reserved */
+
+/* Capability lists */
+
+#define PCI_CAP_LIST_ID         0       /* Capability ID */
+#define  PCI_CAP_ID_PM          0x01    /* Power Management */
+#define  PCI_CAP_ID_AGP         0x02    /* Accelerated Graphics Port */
+#define  PCI_CAP_ID_VPD         0x03    /* Vital Product Data */
+#define  PCI_CAP_ID_SLOTID      0x04    /* Slot Identification */
+#define  PCI_CAP_ID_MSI         0x05    /* Message Signalled Interrupts */
+#define  PCI_CAP_ID_CHSWP       0x06    /* CompactPCI HotSwap */
+#define  PCI_CAP_ID_PCIX        0x07    /* PCI-X */
+#define  PCI_CAP_ID_SHPC        0x0C    /* PCI Standard Hot-Plug Controller */
+#define  PCI_CAP_ID_EXP         0x10    /* PCI Express */
+#define  PCI_CAP_ID_MSIX        0x11    /* MSI-X */
+#define PCI_CAP_LIST_NEXT       1       /* Next capability in the list */
+#define PCI_CAP_FLAGS           2       /* Capability defined flags (16 bits) */
+#define PCI_CAP_SIZEOF          4
+
+/* Power Management Registers */
+
+#define PCI_PM_PMC              2       /* PM Capabilities Register */
+#define  PCI_PM_CAP_VER_MASK    0x0007  /* Version */
+#define  PCI_PM_CAP_PME_CLOCK   0x0008  /* PME clock required */
+#define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
+#define  PCI_PM_CAP_DSI         0x0020  /* Device specific initialization */
+#define  PCI_PM_CAP_AUX_POWER   0x01C0  /* Auxilliary power support mask */
+#define  PCI_PM_CAP_D1          0x0200  /* D1 power state support */
+#define  PCI_PM_CAP_D2          0x0400  /* D2 power state support */
+#define  PCI_PM_CAP_PME         0x0800  /* PME pin supported */
+#define  PCI_PM_CAP_PME_MASK    0xF800  /* PME Mask of all supported states */
+#define  PCI_PM_CAP_PME_D0      0x0800  /* PME# from D0 */
+#define  PCI_PM_CAP_PME_D1      0x1000  /* PME# from D1 */
+#define  PCI_PM_CAP_PME_D2      0x2000  /* PME# from D2 */
+#define  PCI_PM_CAP_PME_D3      0x4000  /* PME# from D3 (hot) */
+#define  PCI_PM_CAP_PME_D3cold  0x8000  /* PME# from D3 (cold) */
+#define PCI_PM_CTRL             4       /* PM control and status register */
+#define  PCI_PM_CTRL_STATE_MASK 0x0003  /* Current power state (D0 to D3) */
+#define  PCI_PM_CTRL_PME_ENABLE 0x0100  /* PME pin enable */
+#define  PCI_PM_CTRL_DATA_SEL_MASK      0x1e00  /* Data select (??) */
+#define  PCI_PM_CTRL_DATA_SCALE_MASK    0x6000  /* Data scale (??) */
+#define  PCI_PM_CTRL_PME_STATUS 0x8000  /* PME pin status */
+#define PCI_PM_PPB_EXTENSIONS   6       /* PPB support extensions (??) */
+#define  PCI_PM_PPB_B2_B3       0x40    /* Stop clock when in D3hot (??) */
+#define  PCI_PM_BPCC_ENABLE     0x80    /* Bus power/clock control enable (??) */
+#define PCI_PM_DATA_REGISTER    7       /* (??) */
+#define PCI_PM_SIZEOF           8
+
+/* AGP registers */
+
+#define PCI_AGP_VERSION         2       /* BCD version number */
+#define PCI_AGP_RFU             3       /* Rest of capability flags */
+#define PCI_AGP_STATUS          4       /* Status register */
+#define  PCI_AGP_STATUS_RQ_MASK 0xff000000      /* Maximum number of requests - 1 */
+#define  PCI_AGP_STATUS_SBA     0x0200  /* Sideband addressing supported */
+#define  PCI_AGP_STATUS_64BIT   0x0020  /* 64-bit addressing supported */
+#define  PCI_AGP_STATUS_FW      0x0010  /* FW transfers supported */
+#define  PCI_AGP_STATUS_RATE4   0x0004  /* 4x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE2   0x0002  /* 2x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE1   0x0001  /* 1x transfer rate supported */
+#define PCI_AGP_COMMAND         8       /* Control register */
+#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
+#define  PCI_AGP_COMMAND_SBA    0x0200  /* Sideband addressing enabled */
+#define  PCI_AGP_COMMAND_AGP    0x0100  /* Allow processing of AGP transactions */
+#define  PCI_AGP_COMMAND_64BIT  0x0020  /* Allow processing of 64-bit addresses */
+#define  PCI_AGP_COMMAND_FW     0x0010  /* Force FW transfers */
+#define  PCI_AGP_COMMAND_RATE4  0x0004  /* Use 4x rate */
+#define  PCI_AGP_COMMAND_RATE2  0x0002  /* Use 2x rate */
+#define  PCI_AGP_COMMAND_RATE1  0x0001  /* Use 1x rate */
+#define PCI_AGP_SIZEOF          12
+
+/* Vital Product Data */
+
+#define PCI_VPD_ADDR            2       /* Address to access (15 bits!) */
+#define  PCI_VPD_ADDR_MASK      0x7fff  /* Address mask */
+#define  PCI_VPD_ADDR_F         0x8000  /* Write 0, 1 indicates completion */
+#define PCI_VPD_DATA            4       /* 32-bits of data returned here */
+
+/* Slot Identification */
+
+#define PCI_SID_ESR             2       /* Expansion Slot Register */
+#define  PCI_SID_ESR_NSLOTS     0x1f    /* Number of expansion slots available */
+#define  PCI_SID_ESR_FIC        0x20    /* First In Chassis Flag */
+#define PCI_SID_CHASSIS_NR      3       /* Chassis Number */
+
+/* Message Signalled Interrupts registers */
+
+#define PCI_MSI_FLAGS           2       /* Various flags */
+#define  PCI_MSI_FLAGS_64BIT    0x80    /* 64-bit addresses allowed */
+#define  PCI_MSI_FLAGS_QSIZE    0x70    /* Message queue size configured */
+#define  PCI_MSI_FLAGS_QMASK    0x0e    /* Maximum queue size available */
+#define  PCI_MSI_FLAGS_ENABLE   0x01    /* MSI feature enabled */
+#define  PCI_MSI_FLAGS_MASKBIT  0x100   /* 64-bit mask bits allowed */
+#define PCI_MSI_RFU             3       /* Rest of capability flags */
+#define PCI_MSI_ADDRESS_LO      4       /* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI      8       /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32         8       /* 16 bits of data for 32-bit devices */
+#define PCI_MSI_DATA_64         12      /* 16 bits of data for 64-bit devices */
+#define PCI_MSI_MASK_BIT        16      /* Mask bits register */
+
+/* CompactPCI Hotswap Register */
+
+#define PCI_CHSWP_CSR           2       /* Control and Status Register */
+#define  PCI_CHSWP_DHA          0x01    /* Device Hiding Arm */
+#define  PCI_CHSWP_EIM          0x02    /* ENUM# Signal Mask */
+#define  PCI_CHSWP_PIE          0x04    /* Pending Insert or Extract */
+#define  PCI_CHSWP_LOO          0x08    /* LED On / Off */
+#define  PCI_CHSWP_PI           0x30    /* Programming Interface */
+#define  PCI_CHSWP_EXT          0x40    /* ENUM# status - extraction */
+#define  PCI_CHSWP_INS          0x80    /* ENUM# status - insertion */
+
+/* PCI-X registers */
+
+#define PCI_X_CMD               2       /* Modes & Features */
+#define  PCI_X_CMD_DPERR_E      0x0001  /* Data Parity Error Recovery Enable */
+#define  PCI_X_CMD_ERO          0x0002  /* Enable Relaxed Ordering */
+#define  PCI_X_CMD_MAX_READ     0x000c  /* Max Memory Read Byte Count */
+#define  PCI_X_CMD_MAX_SPLIT    0x0070  /* Max Outstanding Split Transactions */
+#define  PCI_X_CMD_VERSION(x)   (((x) >> 12) & 3) /* Version */
+#define PCI_X_STATUS            4       /* PCI-X capabilities */
+#define  PCI_X_STATUS_DEVFN     0x000000ff      /* A copy of devfn */
+#define  PCI_X_STATUS_BUS       0x0000ff00      /* A copy of bus nr */
+#define  PCI_X_STATUS_64BIT     0x00010000      /* 64-bit device */
+#define  PCI_X_STATUS_133MHZ    0x00020000      /* 133 MHz capable */
+#define  PCI_X_STATUS_SPL_DISC  0x00040000      /* Split Completion Discarded */
+#define  PCI_X_STATUS_UNX_SPL   0x00080000      /* Unexpected Split Completion */
+#define  PCI_X_STATUS_COMPLEX   0x00100000      /* Device Complexity */
+#define  PCI_X_STATUS_MAX_READ  0x00600000      /* Designed Max Memory Read Count */
+#define  PCI_X_STATUS_MAX_SPLIT 0x03800000      /* Designed Max Outstanding Split Transactions */
+#define  PCI_X_STATUS_MAX_CUM   0x1c000000      /* Designed Max Cumulative Read Size */
+#define  PCI_X_STATUS_SPL_ERR   0x20000000      /* Rcvd Split Completion Error Msg */
+#define  PCI_X_STATUS_266MHZ    0x40000000      /* 266 MHz capable */
+#define  PCI_X_STATUS_533MHZ    0x80000000      /* 533 MHz capable */
+
+/* PCI Express capability registers */
+
+#define PCI_EXP_FLAGS           2       /* Capabilities register */
+#define PCI_EXP_FLAGS_VERS      0x000f  /* Capability version */
+#define PCI_EXP_FLAGS_TYPE      0x00f0  /* Device/Port type */
+#define  PCI_EXP_TYPE_ENDPOINT  0x0     /* Express Endpoint */
+#define  PCI_EXP_TYPE_LEG_END   0x1     /* Legacy Endpoint */
+#define  PCI_EXP_TYPE_ROOT_PORT 0x4     /* Root Port */
+#define  PCI_EXP_TYPE_UPSTREAM  0x5     /* Upstream Port */
+#define  PCI_EXP_TYPE_DOWNSTREAM 0x6    /* Downstream Port */
+#define  PCI_EXP_TYPE_PCI_BRIDGE 0x7    /* PCI/PCI-X Bridge */
+#define PCI_EXP_FLAGS_SLOT      0x0100  /* Slot implemented */
+#define PCI_EXP_FLAGS_IRQ       0x3e00  /* Interrupt message number */
+#define PCI_EXP_DEVCAP          4       /* Device capabilities */
+#define  PCI_EXP_DEVCAP_PAYLOAD 0x07    /* Max_Payload_Size */
+#define  PCI_EXP_DEVCAP_PHANTOM 0x18    /* Phantom functions */
+#define  PCI_EXP_DEVCAP_EXT_TAG 0x20    /* Extended tags */
+#define  PCI_EXP_DEVCAP_L0S     0x1c0   /* L0s Acceptable Latency */
+#define  PCI_EXP_DEVCAP_L1      0xe00   /* L1 Acceptable Latency */
+#define  PCI_EXP_DEVCAP_ATN_BUT 0x1000  /* Attention Button Present */
+#define  PCI_EXP_DEVCAP_ATN_IND 0x2000  /* Attention Indicator Present */
+#define  PCI_EXP_DEVCAP_PWR_IND 0x4000  /* Power Indicator Present */
+#define  PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */
+#define  PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */
+#define PCI_EXP_DEVCTL          8       /* Device Control */
+#define  PCI_EXP_DEVCTL_CERE    0x0001  /* Correctable Error Reporting En. */
+#define  PCI_EXP_DEVCTL_NFERE   0x0002  /* Non-Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_FERE    0x0004  /* Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_URRE    0x0008  /* Unsupported Request Reporting En. */
+#define  PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
+#define  PCI_EXP_DEVCTL_PAYLOAD 0x00e0  /* Max_Payload_Size */
+#define  PCI_EXP_DEVCTL_EXT_TAG 0x0100  /* Extended Tag Field Enable */
+#define  PCI_EXP_DEVCTL_PHANTOM 0x0200  /* Phantom Functions Enable */
+#define  PCI_EXP_DEVCTL_AUX_PME 0x0400  /* Auxiliary Power PM Enable */
+#define  PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800  /* Enable No Snoop */
+#define  PCI_EXP_DEVCTL_READRQ  0x7000  /* Max_Read_Request_Size */
+#define PCI_EXP_DEVSTA          10      /* Device Status */
+#define  PCI_EXP_DEVSTA_CED     0x01    /* Correctable Error Detected */
+#define  PCI_EXP_DEVSTA_NFED    0x02    /* Non-Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_FED     0x04    /* Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_URD     0x08    /* Unsupported Request Detected */
+#define  PCI_EXP_DEVSTA_AUXPD   0x10    /* AUX Power Detected */
+#define  PCI_EXP_DEVSTA_TRPND   0x20    /* Transactions Pending */
+#define PCI_EXP_LNKCAP          12      /* Link Capabilities */
+#define PCI_EXP_LNKCTL          16      /* Link Control */
+#define PCI_EXP_LNKSTA          18      /* Link Status */
+#define PCI_EXP_SLTCAP          20      /* Slot Capabilities */
+#define PCI_EXP_SLTCTL          24      /* Slot Control */
+#define PCI_EXP_SLTSTA          26      /* Slot Status */
+#define PCI_EXP_RTCTL           28      /* Root Control */
+#define  PCI_EXP_RTCTL_SECEE    0x01    /* System Error on Correctable Error */
+#define  PCI_EXP_RTCTL_SENFEE   0x02    /* System Error on Non-Fatal Error */
+#define  PCI_EXP_RTCTL_SEFEE    0x04    /* System Error on Fatal Error */
+#define  PCI_EXP_RTCTL_PMEIE    0x08    /* PME Interrupt Enable */
+#define  PCI_EXP_RTCTL_CRSSVE   0x10    /* CRS Software Visibility Enable */
+#define PCI_EXP_RTCAP           30      /* Root Capabilities */
+#define PCI_EXP_RTSTA           32      /* Root Status */
+
+/* Extended Capabilities (PCI-X 2.0 and Express) */
+#define PCI_EXT_CAP_ID(header)          (header & 0x0000ffff)
+#define PCI_EXT_CAP_VER(header)         ((header >> 16) & 0xf)
+#define PCI_EXT_CAP_NEXT(header)        ((header >> 20) & 0xffc)
+
+#define PCI_EXT_CAP_ID_ERR      1
+#define PCI_EXT_CAP_ID_VC       2
+#define PCI_EXT_CAP_ID_DSN      3
+#define PCI_EXT_CAP_ID_PWR      4
+
+/* Advanced Error Reporting */
+#define PCI_ERR_UNCOR_STATUS    4       /* Uncorrectable Error Status */
+#define  PCI_ERR_UNC_TRAIN      0x00000001      /* Training */
+#define  PCI_ERR_UNC_DLP        0x00000010      /* Data Link Protocol */
+#define  PCI_ERR_UNC_POISON_TLP 0x00001000      /* Poisoned TLP */
+#define  PCI_ERR_UNC_FCP        0x00002000      /* Flow Control Protocol */
+#define  PCI_ERR_UNC_COMP_TIME  0x00004000      /* Completion Timeout */
+#define  PCI_ERR_UNC_COMP_ABORT 0x00008000      /* Completer Abort */
+#define  PCI_ERR_UNC_UNX_COMP   0x00010000      /* Unexpected Completion */
+#define  PCI_ERR_UNC_RX_OVER    0x00020000      /* Receiver Overflow */
+#define  PCI_ERR_UNC_MALF_TLP   0x00040000      /* Malformed TLP */
+#define  PCI_ERR_UNC_ECRC       0x00080000      /* ECRC Error Status */
+#define  PCI_ERR_UNC_UNSUP      0x00100000      /* Unsupported Request */
+#define PCI_ERR_UNCOR_MASK      8       /* Uncorrectable Error Mask */
+        /* Same bits as above */
+#define PCI_ERR_UNCOR_SEVER     12      /* Uncorrectable Error Severity */
+        /* Same bits as above */
+#define PCI_ERR_COR_STATUS      16      /* Correctable Error Status */
+#define  PCI_ERR_COR_RCVR       0x00000001      /* Receiver Error Status */
+#define  PCI_ERR_COR_BAD_TLP    0x00000040      /* Bad TLP Status */
+#define  PCI_ERR_COR_BAD_DLLP   0x00000080      /* Bad DLLP Status */
+#define  PCI_ERR_COR_REP_ROLL   0x00000100      /* REPLAY_NUM Rollover */
+#define  PCI_ERR_COR_REP_TIMER  0x00001000      /* Replay Timer Timeout */
+#define PCI_ERR_COR_MASK        20      /* Correctable Error Mask */
+        /* Same bits as above */
+#define PCI_ERR_CAP             24      /* Advanced Error Capabilities */
+#define  PCI_ERR_CAP_FEP(x)     ((x) & 31)      /* First Error Pointer */
+#define  PCI_ERR_CAP_ECRC_GENC  0x00000020      /* ECRC Generation Capable */
+#define  PCI_ERR_CAP_ECRC_GENE  0x00000040      /* ECRC Generation Enable */
+#define  PCI_ERR_CAP_ECRC_CHKC  0x00000080      /* ECRC Check Capable */
+#define  PCI_ERR_CAP_ECRC_CHKE  0x00000100      /* ECRC Check Enable */
+#define PCI_ERR_HEADER_LOG      28      /* Header Log Register (16 bytes) */
+#define PCI_ERR_ROOT_COMMAND    44      /* Root Error Command */
+#define PCI_ERR_ROOT_STATUS     48
+#define PCI_ERR_ROOT_COR_SRC    52
+#define PCI_ERR_ROOT_SRC        54
+
+/* Virtual Channel */
+#define PCI_VC_PORT_REG1        4
+#define PCI_VC_PORT_REG2        8
+#define PCI_VC_PORT_CTRL        12
+#define PCI_VC_PORT_STATUS      14
+#define PCI_VC_RES_CAP          16
+#define PCI_VC_RES_CTRL         20
+#define PCI_VC_RES_STATUS       26
+
+/* Power Budgeting */
+#define PCI_PWR_DSR             4       /* Data Select Register */
+#define PCI_PWR_DATA            8       /* Data Register */
+#define  PCI_PWR_DATA_BASE(x)   ((x) & 0xff)        /* Base Power */
+#define  PCI_PWR_DATA_SCALE(x)  (((x) >> 8) & 3)    /* Data Scale */
+#define  PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7)   /* PM Sub State */
+#define  PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
+#define  PCI_PWR_DATA_TYPE(x)   (((x) >> 15) & 7)   /* Type */
+#define  PCI_PWR_DATA_RAIL(x)   (((x) >> 18) & 7)   /* Power Rail */
+#define PCI_PWR_CAP             12      /* Capability */
+#define  PCI_PWR_CAP_BUDGET(x)  ((x) & 1)       /* Included in system budget */
+
+/* Include the ID list */
+
+#include <linux/pci_ids.h>
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices.  The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ *      7:3 = slot
+ *      2:0 = function
+ */
+#define PCI_DEVFN(slot,func)    ((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn)         (((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn)         ((devfn) & 0x07)
+
+/* Ioctls for /proc/bus/pci/X/Y nodes. */
+#define PCIIOC_BASE             ('P' << 24 | 'C' << 16 | 'I' << 8)
+#define PCIIOC_CONTROLLER       (PCIIOC_BASE | 0x00)    /* Get controller for PCI device. */
+#define PCIIOC_MMAP_IS_IO       (PCIIOC_BASE | 0x01)    /* Set mmap state to I/O space. */
+#define PCIIOC_MMAP_IS_MEM      (PCIIOC_BASE | 0x02)    /* Set mmap state to MEM space. */
+#define PCIIOC_WRITE_COMBINE    (PCIIOC_BASE | 0x03)    /* Enable/disable write-combining. */
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/config.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+
+/* File state for mmap()s on /proc/bus/pci/X/Y */
+enum pci_mmap_state {
+        pci_mmap_io,
+        pci_mmap_mem
+};
+
+/* This defines the direction arg to the DMA mapping routines. */
+#define PCI_DMA_BIDIRECTIONAL   0
+#define PCI_DMA_TODEVICE        1
+#define PCI_DMA_FROMDEVICE      2
+#define PCI_DMA_NONE            3
+
+#define DEVICE_COUNT_COMPATIBLE 4
+#define DEVICE_COUNT_RESOURCE   12
+
+typedef int __bitwise pci_power_t;
+
+#define PCI_D0  ((pci_power_t __force) 0)
+#define PCI_D1  ((pci_power_t __force) 1)
+#define PCI_D2  ((pci_power_t __force) 2)
+#define PCI_D3hot       ((pci_power_t __force) 3)
+#define PCI_D3cold      ((pci_power_t __force) 4)
+
+/*
+ * The pci_dev structure is used to describe PCI devices.
+ */
+struct pci_dev {
+        struct list_head global_list;   /* node in list of all PCI devices */
+        struct list_head bus_list;      /* node in per-bus list */
+        struct pci_bus  *bus;           /* bus this device is on */
+        struct pci_bus  *subordinate;   /* bus this device bridges to */
+
+        void            *sysdata;       /* hook for sys-specific extension */
+        struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */
+
+        unsigned int    devfn;          /* encoded device & function index */
+        unsigned short  vendor;
+        unsigned short  device;
+        unsigned short  subsystem_vendor;
+        unsigned short  subsystem_device;
+        unsigned int    class;          /* 3 bytes: (base,sub,prog-if) */
+        u8              hdr_type;       /* PCI header type (`multi' flag masked out) */
+        u8              rom_base_reg;   /* which config register controls the ROM */
+
+        struct pci_driver *driver;      /* which driver has allocated this device */
+        u64             dma_mask;       /* Mask of the bits of bus address this
+                                           device implements.  Normally this is
+                                           0xffffffff.  You only need to change
+                                           this if your device has broken DMA
+                                           or supports 64-bit transfers.  */
+
+        pci_power_t     current_state;  /* Current operating state. In ACPI-speak,
+                                           this is D0-D3, D0 being fully functional,
+                                           and D3 being off. */
+
+        struct  device  dev;            /* Generic device interface */
+
+        /* device is compatible with these IDs */
+        unsigned short vendor_compatible[DEVICE_COUNT_COMPATIBLE];
+        unsigned short device_compatible[DEVICE_COUNT_COMPATIBLE];
+
+        int             cfg_size;       /* Size of configuration space */
+
+        /*
+         * Instead of touching interrupt line and base address registers
+         * directly, use the values stored here. They might be different!
+         */
+        unsigned int    irq;
+        struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+
+        /* These fields are used by common fixups */
+        unsigned int    transparent:1;  /* Transparent PCI bridge */
+        unsigned int    multifunction:1;/* Part of multi-function device */
+        /* keep track of device state */
+        unsigned int    is_enabled:1;   /* pci_enable_device has been called */
+        unsigned int    is_busmaster:1; /* device is busmaster */
+        
+        u32             saved_config_space[16]; /* config space saved at suspend time */
+        struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
+        int rom_attr_enabled;           /* has display of the rom attribute been enabled? */
+        struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
+#ifdef CONFIG_PCI_NAMES
+#define PCI_NAME_SIZE   255
+#define PCI_NAME_HALF   __stringify(43) /* less than half to handle slop */
+        char            pretty_name[PCI_NAME_SIZE];     /* pretty name for users to see */
+#endif
+};
+
+#define pci_dev_g(n) list_entry(n, struct pci_dev, global_list)
+#define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list)
+#define to_pci_dev(n) container_of(n, struct pci_dev, dev)
+#define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
+
+/*
+ *  For PCI devices, the region numbers are assigned this way:
+ *
+ *      0-5     standard PCI regions
+ *      6       expansion ROM
+ *      7-10    bridges: address space assigned to buses behind the bridge
+ */
+
+#define PCI_ROM_RESOURCE 6
+#define PCI_BRIDGE_RESOURCES 7
+#define PCI_NUM_RESOURCES 11
+
+#ifndef PCI_BUS_NUM_RESOURCES
+#define PCI_BUS_NUM_RESOURCES 4
+#endif
+  
+#define PCI_REGION_FLAG_MASK 0x0fU      /* These bits of resource flags tell us the PCI region flags */
+
+struct pci_bus {
+        struct list_head node;          /* node in list of buses */
+        struct pci_bus  *parent;        /* parent bus this bridge is on */
+        struct list_head children;      /* list of child buses */
+        struct list_head devices;       /* list of devices on this bus */
+        struct pci_dev  *self;          /* bridge device as seen by parent */
+        struct resource *resource[PCI_BUS_NUM_RESOURCES];
+                                        /* address space routed to this bus */
+
+        struct pci_ops  *ops;           /* configuration access functions */
+        void            *sysdata;       /* hook for sys-specific extension */
+        struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */
+
+        unsigned char   number;         /* bus number */
+        unsigned char   primary;        /* number of primary bridge */
+        unsigned char   secondary;      /* number of secondary bridge */
+        unsigned char   subordinate;    /* max number of subordinate buses */
+
+        char            name[48];
+
+        unsigned short  bridge_ctl;     /* manage NO_ISA/FBB/et al behaviors */
+        unsigned short  pad2;
+        struct device           *bridge;
+        struct class_device     class_dev;
+        struct bin_attribute    *legacy_io; /* legacy I/O for this bus */
+        struct bin_attribute    *legacy_mem; /* legacy mem */
+};
+
+#define pci_bus_b(n)    list_entry(n, struct pci_bus, node)
+#define to_pci_bus(n)   container_of(n, struct pci_bus, class_dev)
+
+/*
+ * Error values that may be returned by PCI functions.
+ */
+#define PCIBIOS_SUCCESSFUL              0x00
+#define PCIBIOS_FUNC_NOT_SUPPORTED      0x81
+#define PCIBIOS_BAD_VENDOR_ID           0x83
+#define PCIBIOS_DEVICE_NOT_FOUND        0x86
+#define PCIBIOS_BAD_REGISTER_NUMBER     0x87
+#define PCIBIOS_SET_FAILED              0x88
+#define PCIBIOS_BUFFER_TOO_SMALL        0x89
+
+/* Low-level architecture-dependent routines */
+
+struct pci_ops {
+        int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
+        int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
+};
+
+struct pci_raw_ops {
+        int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
+                    int reg, int len, u32 *val);
+        int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
+                     int reg, int len, u32 val);
+};
+
+extern struct pci_raw_ops *raw_pci_ops;
+
+struct pci_bus_region {
+        unsigned long start;
+        unsigned long end;
+};
+
+struct pci_dynids {
+        spinlock_t lock;            /* protects list, index */
+        struct list_head list;      /* for IDs added at runtime */
+        unsigned int use_driver_data:1; /* pci_driver->driver_data is used */
+};
+
+struct module;
+struct pci_driver {
+        struct list_head node;
+        char *name;
+        struct module *owner;
+        const struct pci_device_id *id_table;   /* must be non-NULL for probe to be called */
+        int  (*probe)  (struct pci_dev *dev, const struct pci_device_id *id);   /* New device inserted */
+        void (*remove) (struct pci_dev *dev);   /* Device removed (NULL if not a hot-plug capable driver) */
+        int  (*suspend) (struct pci_dev *dev, pm_message_t state);      /* Device suspended */
+        int  (*resume) (struct pci_dev *dev);                   /* Device woken up */
+        int  (*enable_wake) (struct pci_dev *dev, u32 state, int enable);   /* Enable wake event */
+
+        struct device_driver    driver;
+        struct pci_dynids dynids;
+};
+
+#define to_pci_driver(drv) container_of(drv,struct pci_driver, driver)
+
+/**
+ * PCI_DEVICE - macro used to describe a specific pci device
+ * @vend: the 16 bit PCI Vendor ID
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific device.  The subvendor and subdevice fields will be set to
+ * PCI_ANY_ID.
+ */
+#define PCI_DEVICE(vend,dev) \
+        .vendor = (vend), .device = (dev), \
+        .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_DEVICE_CLASS - macro used to describe a specific pci device class
+ * @dev_class: the class, subclass, prog-if triple for this device
+ * @dev_class_mask: the class mask for this device
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI class.  The vendor, device, subvendor, and subdevice 
+ * fields will be set to PCI_ANY_ID.
+ */
+#define PCI_DEVICE_CLASS(dev_class,dev_class_mask) \
+        .class = (dev_class), .class_mask = (dev_class_mask), \
+        .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
+        .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/* 
+ * pci_module_init is obsolete, this stays here till we fix up all usages of it
+ * in the tree.
+ */
+#define pci_module_init pci_register_driver
+
+/* these external functions are only available when PCI support is enabled */
+#ifdef CONFIG_PCI
+
+extern struct bus_type pci_bus_type;
+
+/* Do NOT directly access these two variables, unless you are arch specific pci
+ * code, or pci core code. */
+extern struct list_head pci_root_buses; /* list of all known PCI buses */
+extern struct list_head pci_devices;    /* list of all devices */
+
+void pcibios_fixup_bus(struct pci_bus *);
+int pcibios_enable_device(struct pci_dev *, int mask);
+char *pcibios_setup (char *str);
+
+/* Used only when drivers/pci/setup.c is used */
+void pcibios_align_resource(void *, struct resource *,
+                            unsigned long, unsigned long);
+void pcibios_update_irq(struct pci_dev *, int irq);
+
+/* Generic PCI functions used internally */
+
+extern struct pci_bus *pci_find_bus(int domain, int busnr);
+struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata);
+static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata)
+{
+        return pci_scan_bus_parented(NULL, bus, ops, sysdata);
+}
+int pci_scan_slot(struct pci_bus *bus, int devfn);
+struct pci_dev * pci_scan_single_device(struct pci_bus *bus, int devfn);
+unsigned int pci_scan_child_bus(struct pci_bus *bus);
+void pci_bus_add_device(struct pci_dev *dev);
+void pci_bus_add_devices(struct pci_bus *bus);
+void pci_name_device(struct pci_dev *dev);
+char *pci_class_name(u32 class);
+void pci_read_bridge_bases(struct pci_bus *child);
+struct resource *pci_find_parent_resource(const struct pci_dev *dev, struct resource *res);
+int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge);
+extern struct pci_dev *pci_dev_get(struct pci_dev *dev);
+extern void pci_dev_put(struct pci_dev *dev);
+extern void pci_remove_bus(struct pci_bus *b);
+extern void pci_remove_bus_device(struct pci_dev *dev);
+
+/* Generic PCI functions exported to card drivers */
+
+struct pci_dev *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from);
+struct pci_dev *pci_find_device_reverse (unsigned int vendor, unsigned int device, const struct pci_dev *from);
+struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn);
+int pci_find_capability (struct pci_dev *dev, int cap);
+int pci_find_ext_capability (struct pci_dev *dev, int cap);
+struct pci_bus * pci_find_next_bus(const struct pci_bus *from);
+
+struct pci_dev *pci_get_device (unsigned int vendor, unsigned int device, struct pci_dev *from);
+struct pci_dev *pci_get_subsys (unsigned int vendor, unsigned int device,
+                                unsigned int ss_vendor, unsigned int ss_device,
+                                struct pci_dev *from);
+struct pci_dev *pci_get_slot (struct pci_bus *bus, unsigned int devfn);
+struct pci_dev *pci_get_class (unsigned int class, struct pci_dev *from);
+int pci_dev_present(const struct pci_device_id *ids);
+
+int pci_bus_read_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 *val);
+int pci_bus_read_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 *val);
+int pci_bus_read_config_dword (struct pci_bus *bus, unsigned int devfn, int where, u32 *val);
+int pci_bus_write_config_byte (struct pci_bus *bus, unsigned int devfn, int where, u8 val);
+int pci_bus_write_config_word (struct pci_bus *bus, unsigned int devfn, int where, u16 val);
+int pci_bus_write_config_dword (struct pci_bus *bus, unsigned int devfn, int where, u32 val);
+
+static inline int pci_read_config_byte(struct pci_dev *dev, int where, u8 *val)
+{
+        return pci_bus_read_config_byte (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_read_config_word(struct pci_dev *dev, int where, u16 *val)
+{
+        return pci_bus_read_config_word (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_read_config_dword(struct pci_dev *dev, int where, u32 *val)
+{
+        return pci_bus_read_config_dword (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_write_config_byte(struct pci_dev *dev, int where, u8 val)
+{
+        return pci_bus_write_config_byte (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_write_config_word(struct pci_dev *dev, int where, u16 val)
+{
+        return pci_bus_write_config_word (dev->bus, dev->devfn, where, val);
+}
+static inline int pci_write_config_dword(struct pci_dev *dev, int where, u32 val)
+{
+        return pci_bus_write_config_dword (dev->bus, dev->devfn, where, val);
+}
+
+int pci_enable_device(struct pci_dev *dev);
+int pci_enable_device_bars(struct pci_dev *dev, int mask);
+void pci_disable_device(struct pci_dev *dev);
+void pci_set_master(struct pci_dev *dev);
+#define HAVE_PCI_SET_MWI
+int pci_set_mwi(struct pci_dev *dev);
+void pci_clear_mwi(struct pci_dev *dev);
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
+int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask);
+int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
+int pci_assign_resource(struct pci_dev *dev, int i);
+
+/* ROM control related routines */
+void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size);
+void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size);
+void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
+void pci_remove_rom(struct pci_dev *pdev);
+
+/* Power management related routines */
+int pci_save_state(struct pci_dev *dev);
+int pci_restore_state(struct pci_dev *dev);
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
+pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
+int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+
+/* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
+void pci_bus_assign_resources(struct pci_bus *bus);
+void pci_bus_size_bridges(struct pci_bus *bus);
+int pci_claim_resource(struct pci_dev *, int);
+void pci_assign_unassigned_resources(void);
+void pdev_enable_device(struct pci_dev *);
+void pdev_sort_resources(struct pci_dev *, struct resource_list *);
+void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
+                    int (*)(struct pci_dev *, u8, u8));
+#define HAVE_PCI_REQ_REGIONS    2
+int pci_request_regions(struct pci_dev *, char *);
+void pci_release_regions(struct pci_dev *);
+int pci_request_region(struct pci_dev *, int, char *);
+void pci_release_region(struct pci_dev *, int);
+
+/* drivers/pci/bus.c */
+int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
+                           unsigned long size, unsigned long align,
+                           unsigned long min, unsigned int type_mask,
+                           void (*alignf)(void *, struct resource *,
+                                          unsigned long, unsigned long),
+                           void *alignf_data);
+void pci_enable_bridges(struct pci_bus *bus);
+
+/* New-style probing supporting hot-pluggable devices */
+int pci_register_driver(struct pci_driver *);
+void pci_unregister_driver(struct pci_driver *);
+void pci_remove_behind_bridge(struct pci_dev *);
+struct pci_driver *pci_dev_driver(const struct pci_dev *);
+const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev);
+int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass);
+
+/* kmem_cache style wrapper around pci_alloc_consistent() */
+
+#include <linux/dmapool.h>
+
+#define pci_pool dma_pool
+#define pci_pool_create(name, pdev, size, align, allocation) \
+                dma_pool_create(name, &pdev->dev, size, align, allocation)
+#define pci_pool_destroy(pool) dma_pool_destroy(pool)
+#define pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle)
+#define pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr)
+
+#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
+extern struct pci_dev *isa_bridge;
+#endif
+
+struct msix_entry {
+        u16     vector; /* kernel uses to write allocated vector */
+        u16     entry;  /* driver uses to specify entry, OS writes */
+};
+
+#ifndef CONFIG_PCI_MSI
+static inline void pci_scan_msi_device(struct pci_dev *dev) {}
+static inline int pci_enable_msi(struct pci_dev *dev) {return -1;}
+static inline void pci_disable_msi(struct pci_dev *dev) {}
+static inline int pci_enable_msix(struct pci_dev* dev,
+        struct msix_entry *entries, int nvec) {return -1;}
+static inline void pci_disable_msix(struct pci_dev *dev) {}
+static inline void msi_remove_pci_irq_vectors(struct pci_dev *dev) {}
+#else
+extern void pci_scan_msi_device(struct pci_dev *dev);
+extern int pci_enable_msi(struct pci_dev *dev);
+extern void pci_disable_msi(struct pci_dev *dev);
+extern int pci_enable_msix(struct pci_dev* dev,
+        struct msix_entry *entries, int nvec);
+extern void pci_disable_msix(struct pci_dev *dev);
+extern void msi_remove_pci_irq_vectors(struct pci_dev *dev);
+#endif
+
+#endif /* CONFIG_PCI */
+
+/* Include architecture-dependent settings and functions */
+
+#include <asm/pci.h>
+
+/*
+ *  If the system does not have PCI, clearly these return errors.  Define
+ *  these as simple inline functions to avoid hair in drivers.
+ */
+
+#ifndef CONFIG_PCI
+#define _PCI_NOP(o,s,t) \
+        static inline int pci_##o##_config_##s (struct pci_dev *dev, int where, t val) \
+                { return PCIBIOS_FUNC_NOT_SUPPORTED; }
+#define _PCI_NOP_ALL(o,x)       _PCI_NOP(o,byte,u8 x) \
+                                _PCI_NOP(o,word,u16 x) \
+                                _PCI_NOP(o,dword,u32 x)
+_PCI_NOP_ALL(read, *)
+_PCI_NOP_ALL(write,)
+
+static inline struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, const struct pci_dev *from)
+{ return NULL; }
+
+static inline struct pci_dev *pci_find_slot(unsigned int bus, unsigned int devfn)
+{ return NULL; }
+
+static inline struct pci_dev *pci_get_device (unsigned int vendor, unsigned int device, struct pci_dev *from)
+{ return NULL; }
+
+static inline struct pci_dev *pci_get_subsys (unsigned int vendor, unsigned int device,
+unsigned int ss_vendor, unsigned int ss_device, struct pci_dev *from)
+{ return NULL; }
+
+static inline struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from)
+{ return NULL; }
+
+#define pci_dev_present(ids)    (0)
+#define pci_dev_put(dev)        do { } while (0)
+
+static inline void pci_set_master(struct pci_dev *dev) { }
+static inline int pci_enable_device(struct pci_dev *dev) { return -EIO; }
+static inline void pci_disable_device(struct pci_dev *dev) { }
+static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) { return -EIO; }
+static inline int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask) { return -EIO; }
+static inline int pci_assign_resource(struct pci_dev *dev, int i) { return -EBUSY;}
+static inline int pci_register_driver(struct pci_driver *drv) { return 0;}
+static inline void pci_unregister_driver(struct pci_driver *drv) { }
+static inline int pci_find_capability (struct pci_dev *dev, int cap) {return 0; }
+static inline int pci_find_ext_capability (struct pci_dev *dev, int cap) {return 0; }
+static inline const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev) { return NULL; }
+
+/* Power management related routines */
+static inline int pci_save_state(struct pci_dev *dev) { return 0; }
+static inline int pci_restore_state(struct pci_dev *dev) { return 0; }
+static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { return 0; }
+static inline pci_power_t pci_choose_state(struct pci_dev *dev, u32 state) { return PCI_D0; }
+static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { return 0; }
+
+#define isa_bridge      ((struct pci_dev *)NULL)
+
+#else
+
+/*
+ * PCI domain support.  Sometimes called PCI segment (eg by ACPI),
+ * a PCI domain is defined to be a set of PCI busses which share
+ * configuration space.
+ */
+#ifndef CONFIG_PCI_DOMAINS
+static inline int pci_domain_nr(struct pci_bus *bus) { return 0; }
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+        return 0;
+}
+#endif
+
+#endif /* !CONFIG_PCI */
+
+/* these helpers provide future and backwards compatibility
+ * for accessing popular PCI BAR info */
+#define pci_resource_start(dev,bar)   ((dev)->resource[(bar)].start)
+#define pci_resource_end(dev,bar)     ((dev)->resource[(bar)].end)
+#define pci_resource_flags(dev,bar)   ((dev)->resource[(bar)].flags)
+#define pci_resource_len(dev,bar) \
+        ((pci_resource_start((dev),(bar)) == 0 &&       \
+          pci_resource_end((dev),(bar)) ==              \
+          pci_resource_start((dev),(bar))) ? 0 :        \
+                                                        \
+         (pci_resource_end((dev),(bar)) -               \
+          pci_resource_start((dev),(bar)) + 1))
+
+/* Similar to the helpers above, these manipulate per-pci_dev
+ * driver-specific data.  They are really just a wrapper around
+ * the generic device structure functions of these calls.
+ */
+static inline void *pci_get_drvdata (struct pci_dev *pdev)
+{
+        return dev_get_drvdata(&pdev->dev);
+}
+
+static inline void pci_set_drvdata (struct pci_dev *pdev, void *data)
+{
+        dev_set_drvdata(&pdev->dev, data);
+}
+
+/* If you want to know what to call your pci_dev, ask this function.
+ * Again, it's a wrapper around the generic device.
+ */
+static inline char *pci_name(struct pci_dev *pdev)
+{
+        return pdev->dev.bus_id;
+}
+
+/* Some archs want to see the pretty pci name, so use this macro */
+#ifdef CONFIG_PCI_NAMES
+#define pci_pretty_name(dev) ((dev)->pretty_name)
+#else
+#define pci_pretty_name(dev) ""
+#endif
+
+/*
+ *  The world is not perfect and supplies us with broken PCI devices.
+ *  For at least a part of these bugs we need a work-around, so both
+ *  generic (drivers/pci/quirks.c) and per-architecture code can define
+ *  fixup hooks to be called for particular buggy devices.
+ */
+
+struct pci_fixup {
+        u16 vendor, device;     /* You can use PCI_ANY_ID here of course */
+        void (*hook)(struct pci_dev *dev);
+};
+
+enum pci_fixup_pass {
+        pci_fixup_early,        /* Before probing BARs */
+        pci_fixup_header,       /* After reading configuration header */
+        pci_fixup_final,        /* Final phase of device fixups */
+        pci_fixup_enable,       /* pci_enable_device() time */
+};
+
+/* Anonymous variables would be nice... */
+#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook)  \
+        static struct pci_fixup __pci_fixup_##name __attribute_used__   \
+        __attribute__((__section__(#section))) = { vendor, device, hook };
+#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook)                   \
+        DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,                     \
+                        vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook)                  \
+        DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,                    \
+                        vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook)                   \
+        DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,                     \
+                        vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook)                  \
+        DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable,                    \
+                        vendor##device##hook, vendor, device, hook)
+
+
+void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
+
+extern int pci_pci_problems;
+#define PCIPCI_FAIL             1
+#define PCIPCI_TRITON           2
+#define PCIPCI_NATOMA           4
+#define PCIPCI_VIAETBF          8
+#define PCIPCI_VSFX             16
+#define PCIPCI_ALIMAGIK         32
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_PCI_H */