aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/ide.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/ide.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/ide.h')
-rw-r--r--include/linux/ide.h1516
1 files changed, 1516 insertions, 0 deletions
diff --git a/include/linux/ide.h b/include/linux/ide.h
new file mode 100644
index 000000000000..9cfc0999becb
--- /dev/null
+++ b/include/linux/ide.h
@@ -0,0 +1,1516 @@
1#ifndef _IDE_H
2#define _IDE_H
3/*
4 * linux/include/linux/ide.h
5 *
6 * Copyright (C) 1994-2002 Linus Torvalds & authors
7 */
8
9#include <linux/config.h>
10#include <linux/init.h>
11#include <linux/ioport.h>
12#include <linux/hdreg.h>
13#include <linux/hdsmart.h>
14#include <linux/blkdev.h>
15#include <linux/proc_fs.h>
16#include <linux/interrupt.h>
17#include <linux/bitops.h>
18#include <linux/bio.h>
19#include <linux/device.h>
20#include <linux/pci.h>
21#include <asm/byteorder.h>
22#include <asm/system.h>
23#include <asm/io.h>
24#include <asm/semaphore.h>
25
26/*
27 * This is the multiple IDE interface driver, as evolved from hd.c.
28 * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15).
29 * There can be up to two drives per interface, as per the ATA-2 spec.
30 *
31 * Primary i/f: ide0: major=3; (hda) minor=0; (hdb) minor=64
32 * Secondary i/f: ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64
33 * Tertiary i/f: ide2: major=33; (hde) minor=0; (hdf) minor=64
34 * Quaternary i/f: ide3: major=34; (hdg) minor=0; (hdh) minor=64
35 */
36
37/******************************************************************************
38 * IDE driver configuration options (play with these as desired):
39 *
40 * REALLY_SLOW_IO can be defined in ide.c and ide-cd.c, if necessary
41 */
42#define INITIAL_MULT_COUNT 0 /* off=0; on=2,4,8,16,32, etc.. */
43
44#ifndef SUPPORT_SLOW_DATA_PORTS /* 1 to support slow data ports */
45#define SUPPORT_SLOW_DATA_PORTS 1 /* 0 to reduce kernel size */
46#endif
47#ifndef SUPPORT_VLB_SYNC /* 1 to support weird 32-bit chips */
48#define SUPPORT_VLB_SYNC 1 /* 0 to reduce kernel size */
49#endif
50#ifndef OK_TO_RESET_CONTROLLER /* 1 needed for good error recovery */
51#define OK_TO_RESET_CONTROLLER 1 /* 0 for use with AH2372A/B interface */
52#endif
53
54#ifndef DISABLE_IRQ_NOSYNC
55#define DISABLE_IRQ_NOSYNC 0
56#endif
57
58/*
59 * Used to indicate "no IRQ", should be a value that cannot be an IRQ
60 * number.
61 */
62
63#define IDE_NO_IRQ (-1)
64
65/*
66 * "No user-serviceable parts" beyond this point :)
67 *****************************************************************************/
68
69typedef unsigned char byte; /* used everywhere */
70
71/*
72 * Probably not wise to fiddle with these
73 */
74#define ERROR_MAX 8 /* Max read/write errors per sector */
75#define ERROR_RESET 3 /* Reset controller every 4th retry */
76#define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
77
78/*
79 * Tune flags
80 */
81#define IDE_TUNE_NOAUTO 2
82#define IDE_TUNE_AUTO 1
83#define IDE_TUNE_DEFAULT 0
84
85/*
86 * state flags
87 */
88
89#define DMA_PIO_RETRY 1 /* retrying in PIO */
90
91#define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
92#define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
93
94/*
95 * Definitions for accessing IDE controller registers
96 */
97#define IDE_NR_PORTS (10)
98
99#define IDE_DATA_OFFSET (0)
100#define IDE_ERROR_OFFSET (1)
101#define IDE_NSECTOR_OFFSET (2)
102#define IDE_SECTOR_OFFSET (3)
103#define IDE_LCYL_OFFSET (4)
104#define IDE_HCYL_OFFSET (5)
105#define IDE_SELECT_OFFSET (6)
106#define IDE_STATUS_OFFSET (7)
107#define IDE_CONTROL_OFFSET (8)
108#define IDE_IRQ_OFFSET (9)
109
110#define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET
111#define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET
112
113#define IDE_CONTROL_OFFSET_HOB (7)
114
115#define IDE_DATA_REG (HWIF(drive)->io_ports[IDE_DATA_OFFSET])
116#define IDE_ERROR_REG (HWIF(drive)->io_ports[IDE_ERROR_OFFSET])
117#define IDE_NSECTOR_REG (HWIF(drive)->io_ports[IDE_NSECTOR_OFFSET])
118#define IDE_SECTOR_REG (HWIF(drive)->io_ports[IDE_SECTOR_OFFSET])
119#define IDE_LCYL_REG (HWIF(drive)->io_ports[IDE_LCYL_OFFSET])
120#define IDE_HCYL_REG (HWIF(drive)->io_ports[IDE_HCYL_OFFSET])
121#define IDE_SELECT_REG (HWIF(drive)->io_ports[IDE_SELECT_OFFSET])
122#define IDE_STATUS_REG (HWIF(drive)->io_ports[IDE_STATUS_OFFSET])
123#define IDE_CONTROL_REG (HWIF(drive)->io_ports[IDE_CONTROL_OFFSET])
124#define IDE_IRQ_REG (HWIF(drive)->io_ports[IDE_IRQ_OFFSET])
125
126#define IDE_FEATURE_REG IDE_ERROR_REG
127#define IDE_COMMAND_REG IDE_STATUS_REG
128#define IDE_ALTSTATUS_REG IDE_CONTROL_REG
129#define IDE_IREASON_REG IDE_NSECTOR_REG
130#define IDE_BCOUNTL_REG IDE_LCYL_REG
131#define IDE_BCOUNTH_REG IDE_HCYL_REG
132
133#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
134#define BAD_R_STAT (BUSY_STAT | ERR_STAT)
135#define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
136#define BAD_STAT (BAD_R_STAT | DRQ_STAT)
137#define DRIVE_READY (READY_STAT | SEEK_STAT)
138#define DATA_READY (DRQ_STAT)
139
140#define BAD_CRC (ABRT_ERR | ICRC_ERR)
141
142#define SATA_NR_PORTS (3) /* 16 possible ?? */
143
144#define SATA_STATUS_OFFSET (0)
145#define SATA_STATUS_REG (HWIF(drive)->sata_scr[SATA_STATUS_OFFSET])
146#define SATA_ERROR_OFFSET (1)
147#define SATA_ERROR_REG (HWIF(drive)->sata_scr[SATA_ERROR_OFFSET])
148#define SATA_CONTROL_OFFSET (2)
149#define SATA_CONTROL_REG (HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET])
150
151#define SATA_MISC_OFFSET (0)
152#define SATA_MISC_REG (HWIF(drive)->sata_misc[SATA_MISC_OFFSET])
153#define SATA_PHY_OFFSET (1)
154#define SATA_PHY_REG (HWIF(drive)->sata_misc[SATA_PHY_OFFSET])
155#define SATA_IEN_OFFSET (2)
156#define SATA_IEN_REG (HWIF(drive)->sata_misc[SATA_IEN_OFFSET])
157
158/*
159 * Our Physical Region Descriptor (PRD) table should be large enough
160 * to handle the biggest I/O request we are likely to see. Since requests
161 * can have no more than 256 sectors, and since the typical blocksize is
162 * two or more sectors, we could get by with a limit of 128 entries here for
163 * the usual worst case. Most requests seem to include some contiguous blocks,
164 * further reducing the number of table entries required.
165 *
166 * The driver reverts to PIO mode for individual requests that exceed
167 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
168 * 100% of all crazy scenarios here is not necessary.
169 *
170 * As it turns out though, we must allocate a full 4KB page for this,
171 * so the two PRD tables (ide0 & ide1) will each get half of that,
172 * allowing each to have about 256 entries (8 bytes each) from this.
173 */
174#define PRD_BYTES 8
175#define PRD_ENTRIES 256
176
177/*
178 * Some more useful definitions
179 */
180#define PARTN_BITS 6 /* number of minor dev bits for partitions */
181#define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
182#define SECTOR_SIZE 512
183#define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
184#define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
185
186/*
187 * Timeouts for various operations:
188 */
189#define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
190#define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
191#define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
192#define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
193#define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
194#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
195
196#define HOST(hwif,chipset) \
197{ \
198 return ((hwif)->chipset == chipset) ? 1 : 0; \
199}
200
201/*
202 * Check for an interrupt and acknowledge the interrupt status
203 */
204struct hwif_s;
205typedef int (ide_ack_intr_t)(struct hwif_s *);
206
207#ifndef NO_DMA
208#define NO_DMA 255
209#endif
210
211/*
212 * hwif_chipset_t is used to keep track of the specific hardware
213 * chipset used by each IDE interface, if known.
214 */
215typedef enum { ide_unknown, ide_generic, ide_pci,
216 ide_cmd640, ide_dtc2278, ide_ali14xx,
217 ide_qd65xx, ide_umc8672, ide_ht6560b,
218 ide_rz1000, ide_trm290,
219 ide_cmd646, ide_cy82c693, ide_4drives,
220 ide_pmac, ide_etrax100, ide_acorn,
221 ide_forced
222} hwif_chipset_t;
223
224/*
225 * Structure to hold all information about the location of this port
226 */
227typedef struct hw_regs_s {
228 unsigned long io_ports[IDE_NR_PORTS]; /* task file registers */
229 int irq; /* our irq number */
230 int dma; /* our dma entry */
231 ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
232 hwif_chipset_t chipset;
233} hw_regs_t;
234
235/*
236 * Register new hardware with ide
237 */
238int ide_register_hw(hw_regs_t *hw, struct hwif_s **hwifp);
239int ide_register_hw_with_fixup(hw_regs_t *, struct hwif_s **, void (*)(struct hwif_s *));
240
241/*
242 * Set up hw_regs_t structure before calling ide_register_hw (optional)
243 */
244void ide_setup_ports( hw_regs_t *hw,
245 unsigned long base,
246 int *offsets,
247 unsigned long ctrl,
248 unsigned long intr,
249 ide_ack_intr_t *ack_intr,
250#if 0
251 ide_io_ops_t *iops,
252#endif
253 int irq);
254
255static inline void ide_std_init_ports(hw_regs_t *hw,
256 unsigned long io_addr,
257 unsigned long ctl_addr)
258{
259 unsigned int i;
260
261 for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
262 hw->io_ports[i] = io_addr++;
263
264 hw->io_ports[IDE_CONTROL_OFFSET] = ctl_addr;
265}
266
267#include <asm/ide.h>
268
269/* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */
270#ifndef IDE_ARCH_OBSOLETE_DEFAULTS
271# define ide_default_io_base(index) (0)
272# define ide_default_irq(base) (0)
273# define ide_init_default_irq(base) (0)
274#endif
275
276/*
277 * ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
278 * New ports shouldn't define IDE_ARCH_OBSOLETE_INIT in <asm/ide.h>.
279 */
280#ifdef IDE_ARCH_OBSOLETE_INIT
281static inline void ide_init_hwif_ports(hw_regs_t *hw,
282 unsigned long io_addr,
283 unsigned long ctl_addr,
284 int *irq)
285{
286 if (!ctl_addr)
287 ide_std_init_ports(hw, io_addr, ide_default_io_ctl(io_addr));
288 else
289 ide_std_init_ports(hw, io_addr, ctl_addr);
290
291 if (irq)
292 *irq = 0;
293
294 hw->io_ports[IDE_IRQ_OFFSET] = 0;
295
296#ifdef CONFIG_PPC32
297 if (ppc_ide_md.ide_init_hwif)
298 ppc_ide_md.ide_init_hwif(hw, io_addr, ctl_addr, irq);
299#endif
300}
301#else
302static inline void ide_init_hwif_ports(hw_regs_t *hw,
303 unsigned long io_addr,
304 unsigned long ctl_addr,
305 int *irq)
306{
307 if (io_addr || ctl_addr)
308 printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
309}
310#endif /* IDE_ARCH_OBSOLETE_INIT */
311
312/* Currently only m68k, apus and m8xx need it */
313#ifndef IDE_ARCH_ACK_INTR
314# define ide_ack_intr(hwif) (1)
315#endif
316
317/* Currently only Atari needs it */
318#ifndef IDE_ARCH_LOCK
319# define ide_release_lock() do {} while (0)
320# define ide_get_lock(hdlr, data) do {} while (0)
321#endif /* IDE_ARCH_LOCK */
322
323/*
324 * Now for the data we need to maintain per-drive: ide_drive_t
325 */
326
327#define ide_scsi 0x21
328#define ide_disk 0x20
329#define ide_optical 0x7
330#define ide_cdrom 0x5
331#define ide_tape 0x1
332#define ide_floppy 0x0
333
334/*
335 * Special Driver Flags
336 *
337 * set_geometry : respecify drive geometry
338 * recalibrate : seek to cyl 0
339 * set_multmode : set multmode count
340 * set_tune : tune interface for drive
341 * serviced : service command
342 * reserved : unused
343 */
344typedef union {
345 unsigned all : 8;
346 struct {
347#if defined(__LITTLE_ENDIAN_BITFIELD)
348 unsigned set_geometry : 1;
349 unsigned recalibrate : 1;
350 unsigned set_multmode : 1;
351 unsigned set_tune : 1;
352 unsigned serviced : 1;
353 unsigned reserved : 3;
354#elif defined(__BIG_ENDIAN_BITFIELD)
355 unsigned reserved : 3;
356 unsigned serviced : 1;
357 unsigned set_tune : 1;
358 unsigned set_multmode : 1;
359 unsigned recalibrate : 1;
360 unsigned set_geometry : 1;
361#else
362#error "Please fix <asm/byteorder.h>"
363#endif
364 } b;
365} special_t;
366
367/*
368 * ATA DATA Register Special.
369 * ATA NSECTOR Count Register().
370 * ATAPI Byte Count Register.
371 * Channel index ordering pairs.
372 */
373typedef union {
374 unsigned all :16;
375 struct {
376#if defined(__LITTLE_ENDIAN_BITFIELD)
377 unsigned low :8; /* LSB */
378 unsigned high :8; /* MSB */
379#elif defined(__BIG_ENDIAN_BITFIELD)
380 unsigned high :8; /* MSB */
381 unsigned low :8; /* LSB */
382#else
383#error "Please fix <asm/byteorder.h>"
384#endif
385 } b;
386} ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
387
388/*
389 * ATA-IDE Error Register
390 *
391 * mark : Bad address mark
392 * tzero : Couldn't find track 0
393 * abrt : Aborted Command
394 * mcr : Media Change Request
395 * id : ID field not found
396 * mce : Media Change Event
397 * ecc : Uncorrectable ECC error
398 * bdd : dual meaing
399 */
400typedef union {
401 unsigned all :8;
402 struct {
403#if defined(__LITTLE_ENDIAN_BITFIELD)
404 unsigned mark :1;
405 unsigned tzero :1;
406 unsigned abrt :1;
407 unsigned mcr :1;
408 unsigned id :1;
409 unsigned mce :1;
410 unsigned ecc :1;
411 unsigned bdd :1;
412#elif defined(__BIG_ENDIAN_BITFIELD)
413 unsigned bdd :1;
414 unsigned ecc :1;
415 unsigned mce :1;
416 unsigned id :1;
417 unsigned mcr :1;
418 unsigned abrt :1;
419 unsigned tzero :1;
420 unsigned mark :1;
421#else
422#error "Please fix <asm/byteorder.h>"
423#endif
424 } b;
425} ata_error_t;
426
427/*
428 * ATA-IDE Select Register, aka Device-Head
429 *
430 * head : always zeros here
431 * unit : drive select number: 0/1
432 * bit5 : always 1
433 * lba : using LBA instead of CHS
434 * bit7 : always 1
435 */
436typedef union {
437 unsigned all : 8;
438 struct {
439#if defined(__LITTLE_ENDIAN_BITFIELD)
440 unsigned head : 4;
441 unsigned unit : 1;
442 unsigned bit5 : 1;
443 unsigned lba : 1;
444 unsigned bit7 : 1;
445#elif defined(__BIG_ENDIAN_BITFIELD)
446 unsigned bit7 : 1;
447 unsigned lba : 1;
448 unsigned bit5 : 1;
449 unsigned unit : 1;
450 unsigned head : 4;
451#else
452#error "Please fix <asm/byteorder.h>"
453#endif
454 } b;
455} select_t, ata_select_t;
456
457/*
458 * The ATA-IDE Status Register.
459 * The ATAPI Status Register.
460 *
461 * check : Error occurred
462 * idx : Index Error
463 * corr : Correctable error occurred
464 * drq : Data is request by the device
465 * dsc : Disk Seek Complete : ata
466 * : Media access command finished : atapi
467 * df : Device Fault : ata
468 * : Reserved : atapi
469 * drdy : Ready, Command Mode Capable : ata
470 * : Ignored for ATAPI commands : atapi
471 * bsy : Disk is Busy
472 * : The device has access to the command block
473 */
474typedef union {
475 unsigned all :8;
476 struct {
477#if defined(__LITTLE_ENDIAN_BITFIELD)
478 unsigned check :1;
479 unsigned idx :1;
480 unsigned corr :1;
481 unsigned drq :1;
482 unsigned dsc :1;
483 unsigned df :1;
484 unsigned drdy :1;
485 unsigned bsy :1;
486#elif defined(__BIG_ENDIAN_BITFIELD)
487 unsigned bsy :1;
488 unsigned drdy :1;
489 unsigned df :1;
490 unsigned dsc :1;
491 unsigned drq :1;
492 unsigned corr :1;
493 unsigned idx :1;
494 unsigned check :1;
495#else
496#error "Please fix <asm/byteorder.h>"
497#endif
498 } b;
499} ata_status_t, atapi_status_t;
500
501/*
502 * ATA-IDE Control Register
503 *
504 * bit0 : Should be set to zero
505 * nIEN : device INTRQ to host
506 * SRST : host soft reset bit
507 * bit3 : ATA-2 thingy, Should be set to 1
508 * reserved456 : Reserved
509 * HOB : 48-bit address ordering, High Ordered Bit
510 */
511typedef union {
512 unsigned all : 8;
513 struct {
514#if defined(__LITTLE_ENDIAN_BITFIELD)
515 unsigned bit0 : 1;
516 unsigned nIEN : 1;
517 unsigned SRST : 1;
518 unsigned bit3 : 1;
519 unsigned reserved456 : 3;
520 unsigned HOB : 1;
521#elif defined(__BIG_ENDIAN_BITFIELD)
522 unsigned HOB : 1;
523 unsigned reserved456 : 3;
524 unsigned bit3 : 1;
525 unsigned SRST : 1;
526 unsigned nIEN : 1;
527 unsigned bit0 : 1;
528#else
529#error "Please fix <asm/byteorder.h>"
530#endif
531 } b;
532} ata_control_t;
533
534/*
535 * ATAPI Feature Register
536 *
537 * dma : Using DMA or PIO
538 * reserved321 : Reserved
539 * reserved654 : Reserved (Tag Type)
540 * reserved7 : Reserved
541 */
542typedef union {
543 unsigned all :8;
544 struct {
545#if defined(__LITTLE_ENDIAN_BITFIELD)
546 unsigned dma :1;
547 unsigned reserved321 :3;
548 unsigned reserved654 :3;
549 unsigned reserved7 :1;
550#elif defined(__BIG_ENDIAN_BITFIELD)
551 unsigned reserved7 :1;
552 unsigned reserved654 :3;
553 unsigned reserved321 :3;
554 unsigned dma :1;
555#else
556#error "Please fix <asm/byteorder.h>"
557#endif
558 } b;
559} atapi_feature_t;
560
561/*
562 * ATAPI Interrupt Reason Register.
563 *
564 * cod : Information transferred is command (1) or data (0)
565 * io : The device requests us to read (1) or write (0)
566 * reserved : Reserved
567 */
568typedef union {
569 unsigned all :8;
570 struct {
571#if defined(__LITTLE_ENDIAN_BITFIELD)
572 unsigned cod :1;
573 unsigned io :1;
574 unsigned reserved :6;
575#elif defined(__BIG_ENDIAN_BITFIELD)
576 unsigned reserved :6;
577 unsigned io :1;
578 unsigned cod :1;
579#else
580#error "Please fix <asm/byteorder.h>"
581#endif
582 } b;
583} atapi_ireason_t;
584
585/*
586 * The ATAPI error register.
587 *
588 * ili : Illegal Length Indication
589 * eom : End Of Media Detected
590 * abrt : Aborted command - As defined by ATA
591 * mcr : Media Change Requested - As defined by ATA
592 * sense_key : Sense key of the last failed packet command
593 */
594typedef union {
595 unsigned all :8;
596 struct {
597#if defined(__LITTLE_ENDIAN_BITFIELD)
598 unsigned ili :1;
599 unsigned eom :1;
600 unsigned abrt :1;
601 unsigned mcr :1;
602 unsigned sense_key :4;
603#elif defined(__BIG_ENDIAN_BITFIELD)
604 unsigned sense_key :4;
605 unsigned mcr :1;
606 unsigned abrt :1;
607 unsigned eom :1;
608 unsigned ili :1;
609#else
610#error "Please fix <asm/byteorder.h>"
611#endif
612 } b;
613} atapi_error_t;
614
615/*
616 * ATAPI floppy Drive Select Register
617 *
618 * sam_lun : Logical unit number
619 * reserved3 : Reserved
620 * drv : The responding drive will be drive 0 (0) or drive 1 (1)
621 * one5 : Should be set to 1
622 * reserved6 : Reserved
623 * one7 : Should be set to 1
624 */
625typedef union {
626 unsigned all :8;
627 struct {
628#if defined(__LITTLE_ENDIAN_BITFIELD)
629 unsigned sam_lun :3;
630 unsigned reserved3 :1;
631 unsigned drv :1;
632 unsigned one5 :1;
633 unsigned reserved6 :1;
634 unsigned one7 :1;
635#elif defined(__BIG_ENDIAN_BITFIELD)
636 unsigned one7 :1;
637 unsigned reserved6 :1;
638 unsigned one5 :1;
639 unsigned drv :1;
640 unsigned reserved3 :1;
641 unsigned sam_lun :3;
642#else
643#error "Please fix <asm/byteorder.h>"
644#endif
645 } b;
646} atapi_select_t;
647
648/*
649 * Status returned from various ide_ functions
650 */
651typedef enum {
652 ide_stopped, /* no drive operation was started */
653 ide_started, /* a drive operation was started, handler was set */
654} ide_startstop_t;
655
656struct ide_driver_s;
657struct ide_settings_s;
658
659typedef struct ide_drive_s {
660 char name[4]; /* drive name, such as "hda" */
661 char driver_req[10]; /* requests specific driver */
662
663 request_queue_t *queue; /* request queue */
664
665 struct request *rq; /* current request */
666 struct ide_drive_s *next; /* circular list of hwgroup drives */
667 struct ide_driver_s *driver;/* (ide_driver_t *) */
668 void *driver_data; /* extra driver data */
669 struct hd_driveid *id; /* drive model identification info */
670 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
671 struct ide_settings_s *settings;/* /proc/ide/ drive settings */
672 char devfs_name[64]; /* devfs crap */
673
674 struct hwif_s *hwif; /* actually (ide_hwif_t *) */
675
676 unsigned long sleep; /* sleep until this time */
677 unsigned long service_start; /* time we started last request */
678 unsigned long service_time; /* service time of last request */
679 unsigned long timeout; /* max time to wait for irq */
680
681 special_t special; /* special action flags */
682 select_t select; /* basic drive/head select reg value */
683
684 u8 keep_settings; /* restore settings after drive reset */
685 u8 autodma; /* device can safely use dma on host */
686 u8 using_dma; /* disk is using dma for read/write */
687 u8 retry_pio; /* retrying dma capable host in pio */
688 u8 state; /* retry state */
689 u8 waiting_for_dma; /* dma currently in progress */
690 u8 unmask; /* okay to unmask other irqs */
691 u8 bswap; /* byte swap data */
692 u8 dsc_overlap; /* DSC overlap */
693 u8 nice1; /* give potential excess bandwidth */
694
695 unsigned present : 1; /* drive is physically present */
696 unsigned dead : 1; /* device ejected hint */
697 unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */
698 unsigned noprobe : 1; /* from: hdx=noprobe */
699 unsigned removable : 1; /* 1 if need to do check_media_change */
700 unsigned attach : 1; /* needed for removable devices */
701 unsigned is_flash : 1; /* 1 if probed as flash */
702 unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
703 unsigned no_unmask : 1; /* disallow setting unmask bit */
704 unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
705 unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
706 unsigned nice0 : 1; /* give obvious excess bandwidth */
707 unsigned nice2 : 1; /* give a share in our own bandwidth */
708 unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
709 unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */
710 unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
711 unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
712 unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */
713 unsigned addressing; /* : 3;
714 * 0=28-bit
715 * 1=48-bit
716 * 2=48-bit doing 28-bit
717 * 3=64-bit
718 */
719 unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
720 unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
721 unsigned post_reset : 1;
722
723 u8 quirk_list; /* considered quirky, set for a specific host */
724 u8 init_speed; /* transfer rate set at boot */
725 u8 pio_speed; /* unused by core, used by some drivers for fallback from DMA */
726 u8 current_speed; /* current transfer rate set */
727 u8 dn; /* now wide spread use */
728 u8 wcache; /* status of write cache */
729 u8 acoustic; /* acoustic management */
730 u8 media; /* disk, cdrom, tape, floppy, ... */
731 u8 ctl; /* "normal" value for IDE_CONTROL_REG */
732 u8 ready_stat; /* min status value for drive ready */
733 u8 mult_count; /* current multiple sector setting */
734 u8 mult_req; /* requested multiple sector setting */
735 u8 tune_req; /* requested drive tuning setting */
736 u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
737 u8 bad_wstat; /* used for ignoring WRERR_STAT */
738 u8 nowerr; /* used for ignoring WRERR_STAT */
739 u8 sect0; /* offset of first sector for DM6:DDO */
740 u8 head; /* "real" number of heads */
741 u8 sect; /* "real" sectors per track */
742 u8 bios_head; /* BIOS/fdisk/LILO number of heads */
743 u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
744
745 unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
746 unsigned int cyl; /* "real" number of cyls */
747 unsigned int drive_data; /* use by tuneproc/selectproc */
748 unsigned int usage; /* current "open()" count for drive */
749 unsigned int failures; /* current failure count */
750 unsigned int max_failures; /* maximum allowed failure count */
751
752 u64 capacity64; /* total number of sectors */
753
754 int lun; /* logical unit */
755 int crc_count; /* crc counter to reduce drive speed */
756 struct list_head list;
757 struct device gendev;
758 struct semaphore gendev_rel_sem; /* to deal with device release() */
759} ide_drive_t;
760
761#define IDE_CHIPSET_PCI_MASK \
762 ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
763#define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
764
765struct ide_pci_device_s;
766
767typedef struct hwif_s {
768 struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
769 struct hwif_s *mate; /* other hwif from same PCI chip */
770 struct hwgroup_s *hwgroup; /* actually (ide_hwgroup_t *) */
771 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
772
773 char name[6]; /* name of interface, eg. "ide0" */
774
775 /* task file registers for pata and sata */
776 unsigned long io_ports[IDE_NR_PORTS];
777 unsigned long sata_scr[SATA_NR_PORTS];
778 unsigned long sata_misc[SATA_NR_PORTS];
779
780 hw_regs_t hw; /* Hardware info */
781 ide_drive_t drives[MAX_DRIVES]; /* drive info */
782
783 u8 major; /* our major number */
784 u8 index; /* 0 for ide0; 1 for ide1; ... */
785 u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
786 u8 straight8; /* Alan's straight 8 check */
787 u8 bus_state; /* power state of the IDE bus */
788
789 u8 atapi_dma; /* host supports atapi_dma */
790 u8 ultra_mask;
791 u8 mwdma_mask;
792 u8 swdma_mask;
793
794 hwif_chipset_t chipset; /* sub-module for tuning.. */
795
796 struct pci_dev *pci_dev; /* for pci chipsets */
797 struct ide_pci_device_s *cds; /* chipset device struct */
798
799 void (*rw_disk)(ide_drive_t *, struct request *);
800
801#if 0
802 ide_hwif_ops_t *hwifops;
803#else
804 /* routine to tune PIO mode for drives */
805 void (*tuneproc)(ide_drive_t *, u8);
806 /* routine to retune DMA modes for drives */
807 int (*speedproc)(ide_drive_t *, u8);
808 /* tweaks hardware to select drive */
809 void (*selectproc)(ide_drive_t *);
810 /* chipset polling based on hba specifics */
811 int (*reset_poll)(ide_drive_t *);
812 /* chipset specific changes to default for device-hba resets */
813 void (*pre_reset)(ide_drive_t *);
814 /* routine to reset controller after a disk reset */
815 void (*resetproc)(ide_drive_t *);
816 /* special interrupt handling for shared pci interrupts */
817 void (*intrproc)(ide_drive_t *);
818 /* special host masking for drive selection */
819 void (*maskproc)(ide_drive_t *, int);
820 /* check host's drive quirk list */
821 int (*quirkproc)(ide_drive_t *);
822 /* driver soft-power interface */
823 int (*busproc)(ide_drive_t *, int);
824// /* host rate limiter */
825// u8 (*ratemask)(ide_drive_t *);
826// /* device rate limiter */
827// u8 (*ratefilter)(ide_drive_t *, u8);
828#endif
829
830 void (*ata_input_data)(ide_drive_t *, void *, u32);
831 void (*ata_output_data)(ide_drive_t *, void *, u32);
832
833 void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
834 void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
835
836 int (*dma_setup)(ide_drive_t *);
837 void (*dma_exec_cmd)(ide_drive_t *, u8);
838 void (*dma_start)(ide_drive_t *);
839 int (*ide_dma_end)(ide_drive_t *drive);
840 int (*ide_dma_check)(ide_drive_t *drive);
841 int (*ide_dma_on)(ide_drive_t *drive);
842 int (*ide_dma_off_quietly)(ide_drive_t *drive);
843 int (*ide_dma_test_irq)(ide_drive_t *drive);
844 int (*ide_dma_host_on)(ide_drive_t *drive);
845 int (*ide_dma_host_off)(ide_drive_t *drive);
846 int (*ide_dma_lostirq)(ide_drive_t *drive);
847 int (*ide_dma_timeout)(ide_drive_t *drive);
848
849 void (*OUTB)(u8 addr, unsigned long port);
850 void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
851 void (*OUTW)(u16 addr, unsigned long port);
852 void (*OUTL)(u32 addr, unsigned long port);
853 void (*OUTSW)(unsigned long port, void *addr, u32 count);
854 void (*OUTSL)(unsigned long port, void *addr, u32 count);
855
856 u8 (*INB)(unsigned long port);
857 u16 (*INW)(unsigned long port);
858 u32 (*INL)(unsigned long port);
859 void (*INSW)(unsigned long port, void *addr, u32 count);
860 void (*INSL)(unsigned long port, void *addr, u32 count);
861
862 /* dma physical region descriptor table (cpu view) */
863 unsigned int *dmatable_cpu;
864 /* dma physical region descriptor table (dma view) */
865 dma_addr_t dmatable_dma;
866 /* Scatter-gather list used to build the above */
867 struct scatterlist *sg_table;
868 int sg_max_nents; /* Maximum number of entries in it */
869 int sg_nents; /* Current number of entries in it */
870 int sg_dma_direction; /* dma transfer direction */
871
872 /* data phase of the active command (currently only valid for PIO/DMA) */
873 int data_phase;
874
875 unsigned int nsect;
876 unsigned int nleft;
877 unsigned int cursg;
878 unsigned int cursg_ofs;
879
880 int mmio; /* hosts iomio (0) or custom (2) select */
881 int rqsize; /* max sectors per request */
882 int irq; /* our irq number */
883
884 unsigned long dma_master; /* reference base addr dmabase */
885 unsigned long dma_base; /* base addr for dma ports */
886 unsigned long dma_command; /* dma command register */
887 unsigned long dma_vendor1; /* dma vendor 1 register */
888 unsigned long dma_status; /* dma status register */
889 unsigned long dma_vendor3; /* dma vendor 3 register */
890 unsigned long dma_prdtable; /* actual prd table address */
891 unsigned long dma_base2; /* extended base addr for dma ports */
892
893 unsigned dma_extra; /* extra addr for dma ports */
894 unsigned long config_data; /* for use by chipset-specific code */
895 unsigned long select_data; /* for use by chipset-specific code */
896
897 unsigned noprobe : 1; /* don't probe for this interface */
898 unsigned present : 1; /* this interface exists */
899 unsigned hold : 1; /* this interface is always present */
900 unsigned serialized : 1; /* serialized all channel operation */
901 unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
902 unsigned reset : 1; /* reset after probe */
903 unsigned autodma : 1; /* auto-attempt using DMA at boot */
904 unsigned udma_four : 1; /* 1=ATA-66 capable, 0=default */
905 unsigned no_lba48 : 1; /* 1 = cannot do LBA48 */
906 unsigned no_lba48_dma : 1; /* 1 = cannot do LBA48 DMA */
907 unsigned no_dsc : 1; /* 0 default, 1 dsc_overlap disabled */
908 unsigned auto_poll : 1; /* supports nop auto-poll */
909 unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
910
911 struct device gendev;
912 struct semaphore gendev_rel_sem; /* To deal with device release() */
913
914 void *hwif_data; /* extra hwif data */
915
916 unsigned dma;
917
918 void (*led_act)(void *data, int rw);
919} ide_hwif_t;
920
921/*
922 * internal ide interrupt handler type
923 */
924typedef ide_startstop_t (ide_pre_handler_t)(ide_drive_t *, struct request *);
925typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
926typedef int (ide_expiry_t)(ide_drive_t *);
927
928typedef struct hwgroup_s {
929 /* irq handler, if active */
930 ide_startstop_t (*handler)(ide_drive_t *);
931 /* irq handler, suspended if active */
932 ide_startstop_t (*handler_save)(ide_drive_t *);
933 /* BOOL: protects all fields below */
934 volatile int busy;
935 /* BOOL: wake us up on timer expiry */
936 unsigned int sleeping : 1;
937 /* BOOL: polling active & poll_timeout field valid */
938 unsigned int polling : 1;
939 /* current drive */
940 ide_drive_t *drive;
941 /* ptr to current hwif in linked-list */
942 ide_hwif_t *hwif;
943
944 /* for pci chipsets */
945 struct pci_dev *pci_dev;
946 /* chipset device struct */
947 struct ide_pci_device_s *cds;
948
949 /* current request */
950 struct request *rq;
951 /* failsafe timer */
952 struct timer_list timer;
953 /* local copy of current write rq */
954 struct request wrq;
955 /* timeout value during long polls */
956 unsigned long poll_timeout;
957 /* queried upon timeouts */
958 int (*expiry)(ide_drive_t *);
959 /* ide_system_bus_speed */
960 int pio_clock;
961
962 unsigned char cmd_buf[4];
963} ide_hwgroup_t;
964
965/* structure attached to the request for IDE_TASK_CMDS */
966
967/*
968 * configurable drive settings
969 */
970
971#define TYPE_INT 0
972#define TYPE_INTA 1
973#define TYPE_BYTE 2
974#define TYPE_SHORT 3
975
976#define SETTING_READ (1 << 0)
977#define SETTING_WRITE (1 << 1)
978#define SETTING_RW (SETTING_READ | SETTING_WRITE)
979
980typedef int (ide_procset_t)(ide_drive_t *, int);
981typedef struct ide_settings_s {
982 char *name;
983 int rw;
984 int read_ioctl;
985 int write_ioctl;
986 int data_type;
987 int min;
988 int max;
989 int mul_factor;
990 int div_factor;
991 void *data;
992 ide_procset_t *set;
993 int auto_remove;
994 struct ide_settings_s *next;
995} ide_settings_t;
996
997extern struct semaphore ide_setting_sem;
998extern int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set);
999extern ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name);
1000extern int ide_read_setting(ide_drive_t *t, ide_settings_t *setting);
1001extern int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val);
1002extern void ide_add_generic_settings(ide_drive_t *drive);
1003
1004/*
1005 * /proc/ide interface
1006 */
1007typedef struct {
1008 const char *name;
1009 mode_t mode;
1010 read_proc_t *read_proc;
1011 write_proc_t *write_proc;
1012} ide_proc_entry_t;
1013
1014#ifdef CONFIG_PROC_FS
1015extern struct proc_dir_entry *proc_ide_root;
1016
1017extern void proc_ide_create(void);
1018extern void proc_ide_destroy(void);
1019extern void create_proc_ide_interfaces(void);
1020void destroy_proc_ide_interface(ide_hwif_t *);
1021extern void ide_add_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *, void *);
1022extern void ide_remove_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *);
1023read_proc_t proc_ide_read_capacity;
1024read_proc_t proc_ide_read_geometry;
1025
1026#ifdef CONFIG_BLK_DEV_IDEPCI
1027void ide_pci_create_host_proc(const char *, get_info_t *);
1028#endif
1029
1030/*
1031 * Standard exit stuff:
1032 */
1033#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
1034{ \
1035 len -= off; \
1036 if (len < count) { \
1037 *eof = 1; \
1038 if (len <= 0) \
1039 return 0; \
1040 } else \
1041 len = count; \
1042 *start = page + off; \
1043 return len; \
1044}
1045#else
1046static inline void create_proc_ide_interfaces(void) { ; }
1047static inline void destroy_proc_ide_interface(ide_hwif_t *hwif) { ; }
1048#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
1049#endif
1050
1051/*
1052 * Power Management step value (rq->pm->pm_step).
1053 *
1054 * The step value starts at 0 (ide_pm_state_start_suspend) for a
1055 * suspend operation or 1000 (ide_pm_state_start_resume) for a
1056 * resume operation.
1057 *
1058 * For each step, the core calls the subdriver start_power_step() first.
1059 * This can return:
1060 * - ide_stopped : In this case, the core calls us back again unless
1061 * step have been set to ide_power_state_completed.
1062 * - ide_started : In this case, the channel is left busy until an
1063 * async event (interrupt) occurs.
1064 * Typically, start_power_step() will issue a taskfile request with
1065 * do_rw_taskfile().
1066 *
1067 * Upon reception of the interrupt, the core will call complete_power_step()
1068 * with the error code if any. This routine should update the step value
1069 * and return. It should not start a new request. The core will call
1070 * start_power_step for the new step value, unless step have been set to
1071 * ide_power_state_completed.
1072 *
1073 * Subdrivers are expected to define their own additional power
1074 * steps from 1..999 for suspend and from 1001..1999 for resume,
1075 * other values are reserved for future use.
1076 */
1077
1078enum {
1079 ide_pm_state_completed = -1,
1080 ide_pm_state_start_suspend = 0,
1081 ide_pm_state_start_resume = 1000,
1082};
1083
1084/*
1085 * Subdrivers support.
1086 */
1087typedef struct ide_driver_s {
1088 struct module *owner;
1089 const char *name;
1090 const char *version;
1091 u8 media;
1092 unsigned busy : 1;
1093 unsigned supports_dsc_overlap : 1;
1094 int (*cleanup)(ide_drive_t *);
1095 ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
1096 int (*end_request)(ide_drive_t *, int, int);
1097 ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
1098 ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
1099 int (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
1100 ide_proc_entry_t *proc;
1101 int (*attach)(ide_drive_t *);
1102 void (*ata_prebuilder)(ide_drive_t *);
1103 void (*atapi_prebuilder)(ide_drive_t *);
1104 struct device_driver gen_driver;
1105 struct list_head drives;
1106 struct list_head drivers;
1107} ide_driver_t;
1108
1109#define DRIVER(drive) ((drive)->driver)
1110
1111int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
1112
1113/*
1114 * ide_hwifs[] is the master data structure used to keep track
1115 * of just about everything in ide.c. Whenever possible, routines
1116 * should be using pointers to a drive (ide_drive_t *) or
1117 * pointers to a hwif (ide_hwif_t *), rather than indexing this
1118 * structure directly (the allocation/layout may change!).
1119 *
1120 */
1121#ifndef _IDE_C
1122extern ide_hwif_t ide_hwifs[]; /* master data repository */
1123#endif
1124extern int noautodma;
1125
1126extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
1127extern int __ide_end_request (ide_drive_t *drive, struct request *rq, int uptodate, int nrsecs);
1128
1129/*
1130 * This is used on exit from the driver to designate the next irq handler
1131 * and also to start the safety timer.
1132 */
1133extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
1134
1135/*
1136 * This is used on exit from the driver to designate the next irq handler
1137 * and start the safety time safely and atomically from the IRQ handler
1138 * with respect to the command issue (which it also does)
1139 */
1140extern void ide_execute_command(ide_drive_t *, task_ioreg_t cmd, ide_handler_t *, unsigned int, ide_expiry_t *);
1141
1142ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
1143
1144/*
1145 * ide_error() takes action based on the error returned by the controller.
1146 * The caller should return immediately after invoking this.
1147 *
1148 * (drive, msg, status)
1149 */
1150ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
1151
1152ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
1153
1154/*
1155 * Abort a running command on the controller triggering the abort
1156 * from a host side, non error situation
1157 * (drive, msg)
1158 */
1159extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
1160
1161extern void ide_fix_driveid(struct hd_driveid *);
1162/*
1163 * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
1164 * removing leading/trailing blanks and compressing internal blanks.
1165 * It is primarily used to tidy up the model name/number fields as
1166 * returned by the WIN_[P]IDENTIFY commands.
1167 *
1168 * (s, bytecount, byteswap)
1169 */
1170extern void ide_fixstring(u8 *, const int, const int);
1171
1172/*
1173 * This routine busy-waits for the drive status to be not "busy".
1174 * It then checks the status for all of the "good" bits and none
1175 * of the "bad" bits, and if all is okay it returns 0. All other
1176 * cases return 1 after doing "*startstop = ide_error()", and the
1177 * caller should return the updated value of "startstop" in this case.
1178 * "startstop" is unchanged when the function returns 0;
1179 * (startstop, drive, good, bad, timeout)
1180 */
1181extern int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
1182
1183/*
1184 * Start a reset operation for an IDE interface.
1185 * The caller should return immediately after invoking this.
1186 */
1187extern ide_startstop_t ide_do_reset (ide_drive_t *);
1188
1189/*
1190 * This function is intended to be used prior to invoking ide_do_drive_cmd().
1191 */
1192extern void ide_init_drive_cmd (struct request *rq);
1193
1194/*
1195 * this function returns error location sector offset in case of a write error
1196 */
1197extern u64 ide_get_error_location(ide_drive_t *, char *);
1198
1199/*
1200 * "action" parameter type for ide_do_drive_cmd() below.
1201 */
1202typedef enum {
1203 ide_wait, /* insert rq at end of list, and wait for it */
1204 ide_next, /* insert rq immediately after current request */
1205 ide_preempt, /* insert rq in front of current request */
1206 ide_head_wait, /* insert rq in front of current request and wait for it */
1207 ide_end /* insert rq at end of list, but don't wait for it */
1208} ide_action_t;
1209
1210/*
1211 * This function issues a special IDE device request
1212 * onto the request queue.
1213 *
1214 * If action is ide_wait, then the rq is queued at the end of the
1215 * request queue, and the function sleeps until it has been processed.
1216 * This is for use when invoked from an ioctl handler.
1217 *
1218 * If action is ide_preempt, then the rq is queued at the head of
1219 * the request queue, displacing the currently-being-processed
1220 * request and this function returns immediately without waiting
1221 * for the new rq to be completed. This is VERY DANGEROUS, and is
1222 * intended for careful use by the ATAPI tape/cdrom driver code.
1223 *
1224 * If action is ide_next, then the rq is queued immediately after
1225 * the currently-being-processed-request (if any), and the function
1226 * returns without waiting for the new rq to be completed. As above,
1227 * This is VERY DANGEROUS, and is intended for careful use by the
1228 * ATAPI tape/cdrom driver code.
1229 *
1230 * If action is ide_end, then the rq is queued at the end of the
1231 * request queue, and the function returns immediately without waiting
1232 * for the new rq to be completed. This is again intended for careful
1233 * use by the ATAPI tape/cdrom driver code.
1234 */
1235extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
1236
1237/*
1238 * Clean up after success/failure of an explicit drive cmd.
1239 * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_CMD).
1240 * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_TASK_MASK).
1241 *
1242 * (ide_drive_t *drive, u8 stat, u8 err)
1243 */
1244extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
1245
1246/*
1247 * Issue ATA command and wait for completion.
1248 * Use for implementing commands in kernel
1249 *
1250 * (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf)
1251 */
1252extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *);
1253
1254typedef struct ide_task_s {
1255/*
1256 * struct hd_drive_task_hdr tf;
1257 * task_struct_t tf;
1258 * struct hd_drive_hob_hdr hobf;
1259 * hob_struct_t hobf;
1260 */
1261 task_ioreg_t tfRegister[8];
1262 task_ioreg_t hobRegister[8];
1263 ide_reg_valid_t tf_out_flags;
1264 ide_reg_valid_t tf_in_flags;
1265 int data_phase;
1266 int command_type;
1267 ide_pre_handler_t *prehandler;
1268 ide_handler_t *handler;
1269 struct request *rq; /* copy of request */
1270 void *special; /* valid_t generally */
1271} ide_task_t;
1272
1273extern u32 ide_read_24(ide_drive_t *);
1274
1275extern void SELECT_DRIVE(ide_drive_t *);
1276extern void SELECT_INTERRUPT(ide_drive_t *);
1277extern void SELECT_MASK(ide_drive_t *, int);
1278extern void QUIRK_LIST(ide_drive_t *);
1279
1280extern int drive_is_ready(ide_drive_t *);
1281extern int wait_for_ready(ide_drive_t *, int /* timeout */);
1282
1283/*
1284 * taskfile io for disks for now...and builds request from ide_ioctl
1285 */
1286extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
1287
1288/*
1289 * Special Flagged Register Validation Caller
1290 */
1291extern ide_startstop_t flagged_taskfile(ide_drive_t *, ide_task_t *);
1292
1293extern ide_startstop_t set_multmode_intr(ide_drive_t *);
1294extern ide_startstop_t set_geometry_intr(ide_drive_t *);
1295extern ide_startstop_t recal_intr(ide_drive_t *);
1296extern ide_startstop_t task_no_data_intr(ide_drive_t *);
1297extern ide_startstop_t task_in_intr(ide_drive_t *);
1298extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
1299
1300extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *);
1301
1302int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
1303int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
1304int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
1305
1306extern int system_bus_clock(void);
1307
1308extern int ide_driveid_update(ide_drive_t *);
1309extern int ide_ata66_check(ide_drive_t *, ide_task_t *);
1310extern int ide_config_drive_speed(ide_drive_t *, u8);
1311extern u8 eighty_ninty_three (ide_drive_t *);
1312extern int set_transfer(ide_drive_t *, ide_task_t *);
1313extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1314
1315extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1316
1317/*
1318 * ide_stall_queue() can be used by a drive to give excess bandwidth back
1319 * to the hwgroup by sleeping for timeout jiffies.
1320 */
1321extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1322
1323extern int ide_spin_wait_hwgroup(ide_drive_t *);
1324extern void ide_timer_expiry(unsigned long);
1325extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs);
1326extern void do_ide_request(request_queue_t *);
1327extern void ide_init_subdrivers(void);
1328
1329void ide_init_disk(struct gendisk *, ide_drive_t *);
1330
1331extern int ata_attach(ide_drive_t *);
1332
1333extern int ideprobe_init(void);
1334
1335extern void ide_scan_pcibus(int scan_direction) __init;
1336extern int ide_pci_register_driver(struct pci_driver *driver);
1337extern void ide_pci_unregister_driver(struct pci_driver *driver);
1338void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
1339extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
1340
1341extern void default_hwif_iops(ide_hwif_t *);
1342extern void default_hwif_mmiops(ide_hwif_t *);
1343extern void default_hwif_transport(ide_hwif_t *);
1344
1345int ide_register_driver(ide_driver_t *driver);
1346void ide_unregister_driver(ide_driver_t *driver);
1347int ide_register_subdriver(ide_drive_t *, ide_driver_t *);
1348int ide_unregister_subdriver (ide_drive_t *drive);
1349int ide_replace_subdriver(ide_drive_t *drive, const char *driver);
1350
1351#define ON_BOARD 1
1352#define NEVER_BOARD 0
1353
1354#ifdef CONFIG_BLK_DEV_OFFBOARD
1355# define OFF_BOARD ON_BOARD
1356#else /* CONFIG_BLK_DEV_OFFBOARD */
1357# define OFF_BOARD NEVER_BOARD
1358#endif /* CONFIG_BLK_DEV_OFFBOARD */
1359
1360#define NODMA 0
1361#define NOAUTODMA 1
1362#define AUTODMA 2
1363
1364typedef struct ide_pci_enablebit_s {
1365 u8 reg; /* byte pci reg holding the enable-bit */
1366 u8 mask; /* mask to isolate the enable-bit */
1367 u8 val; /* value of masked reg when "enabled" */
1368} ide_pci_enablebit_t;
1369
1370enum {
1371 /* Uses ISA control ports not PCI ones. */
1372 IDEPCI_FLAG_ISA_PORTS = (1 << 0),
1373 IDEPCI_FLAG_FORCE_PDC = (1 << 1),
1374};
1375
1376typedef struct ide_pci_device_s {
1377 char *name;
1378 int (*init_setup)(struct pci_dev *, struct ide_pci_device_s *);
1379 void (*init_setup_dma)(struct pci_dev *, struct ide_pci_device_s *, ide_hwif_t *);
1380 unsigned int (*init_chipset)(struct pci_dev *, const char *);
1381 void (*init_iops)(ide_hwif_t *);
1382 void (*init_hwif)(ide_hwif_t *);
1383 void (*init_dma)(ide_hwif_t *, unsigned long);
1384 void (*fixup)(ide_hwif_t *);
1385 u8 channels;
1386 u8 autodma;
1387 ide_pci_enablebit_t enablebits[2];
1388 u8 bootable;
1389 unsigned int extra;
1390 struct ide_pci_device_s *next;
1391 u8 flags;
1392} ide_pci_device_t;
1393
1394extern int ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
1395extern int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, ide_pci_device_t *);
1396
1397void ide_map_sg(ide_drive_t *, struct request *);
1398void ide_init_sg_cmd(ide_drive_t *, struct request *);
1399
1400#define BAD_DMA_DRIVE 0
1401#define GOOD_DMA_DRIVE 1
1402
1403#ifdef CONFIG_BLK_DEV_IDEDMA
1404int __ide_dma_bad_drive(ide_drive_t *);
1405int __ide_dma_good_drive(ide_drive_t *);
1406int ide_use_dma(ide_drive_t *);
1407int __ide_dma_off(ide_drive_t *);
1408void ide_dma_verbose(ide_drive_t *);
1409ide_startstop_t ide_dma_intr(ide_drive_t *);
1410
1411#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1412extern int ide_build_sglist(ide_drive_t *, struct request *);
1413extern int ide_build_dmatable(ide_drive_t *, struct request *);
1414extern void ide_destroy_dmatable(ide_drive_t *);
1415extern int ide_release_dma(ide_hwif_t *);
1416extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
1417
1418extern int __ide_dma_host_off(ide_drive_t *);
1419extern int __ide_dma_off_quietly(ide_drive_t *);
1420extern int __ide_dma_host_on(ide_drive_t *);
1421extern int __ide_dma_on(ide_drive_t *);
1422extern int __ide_dma_check(ide_drive_t *);
1423extern int ide_dma_setup(ide_drive_t *);
1424extern void ide_dma_start(ide_drive_t *);
1425extern int __ide_dma_end(ide_drive_t *);
1426extern int __ide_dma_lostirq(ide_drive_t *);
1427extern int __ide_dma_timeout(ide_drive_t *);
1428#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
1429
1430#else
1431static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
1432static inline int __ide_dma_off(ide_drive_t *drive) { return 0; }
1433static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1434#endif /* CONFIG_BLK_DEV_IDEDMA */
1435
1436#ifndef CONFIG_BLK_DEV_IDEDMA_PCI
1437static inline void ide_release_dma(ide_hwif_t *drive) {;}
1438#endif
1439
1440extern int ide_hwif_request_regions(ide_hwif_t *hwif);
1441extern void ide_hwif_release_regions(ide_hwif_t* hwif);
1442extern void ide_unregister (unsigned int index);
1443
1444void ide_register_region(struct gendisk *);
1445void ide_unregister_region(struct gendisk *);
1446
1447void ide_undecoded_slave(ide_hwif_t *);
1448
1449int probe_hwif_init_with_fixup(ide_hwif_t *, void (*)(ide_hwif_t *));
1450extern int probe_hwif_init(ide_hwif_t *);
1451
1452static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1453{
1454 return hwif->hwif_data;
1455}
1456
1457static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1458{
1459 hwif->hwif_data = data;
1460}
1461
1462/* ide-lib.c */
1463extern u8 ide_dma_speed(ide_drive_t *drive, u8 mode);
1464extern u8 ide_rate_filter(u8 mode, u8 speed);
1465extern int ide_dma_enable(ide_drive_t *drive);
1466extern char *ide_xfer_verbose(u8 xfer_rate);
1467extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1468extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
1469
1470u8 ide_dump_status(ide_drive_t *, const char *, u8);
1471
1472typedef struct ide_pio_timings_s {
1473 int setup_time; /* Address setup (ns) minimum */
1474 int active_time; /* Active pulse (ns) minimum */
1475 int cycle_time; /* Cycle time (ns) minimum = (setup + active + recovery) */
1476} ide_pio_timings_t;
1477
1478typedef struct ide_pio_data_s {
1479 u8 pio_mode;
1480 u8 use_iordy;
1481 u8 overridden;
1482 u8 blacklisted;
1483 unsigned int cycle_time;
1484} ide_pio_data_t;
1485
1486extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
1487extern const ide_pio_timings_t ide_pio_timings[6];
1488
1489
1490extern spinlock_t ide_lock;
1491extern struct semaphore ide_cfg_sem;
1492/*
1493 * Structure locking:
1494 *
1495 * ide_cfg_sem and ide_lock together protect changes to
1496 * ide_hwif_t->{next,hwgroup}
1497 * ide_drive_t->next
1498 *
1499 * ide_hwgroup_t->busy: ide_lock
1500 * ide_hwgroup_t->hwif: ide_lock
1501 * ide_hwif_t->mate: constant, no locking
1502 * ide_drive_t->hwif: constant, no locking
1503 */
1504
1505#define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable(); } while (0)
1506
1507extern struct bus_type ide_bus_type;
1508
1509/* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
1510#define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
1511
1512/* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
1513#define ide_id_has_flush_cache_ext(id) \
1514 (((id)->cfs_enable_2 & 0x2400) == 0x2400)
1515
1516#endif /* _IDE_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-08 10:33:00 -0500