UAPI: Unexport linux/blk_types.h

It seems that was linux/blk_types.h incorrectly exported to fix up some missing
bits required by the exported parts of linux/fs.h (READ, WRITE, READA, etc.).

So unexport linux/blk_types.h and unexport the relevant bits of linux/fs.h.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jens Axboe <jaxboe@fusionio.com>
cc: Tejun Heo <tj@kernel.org>
cc: Al Viro <viro@ZenIV.linux.org.uk>

1 files changed, 59 insertions, 60 deletions

diff --git a/include/linux/fs.h b/include/linux/fs.h
index 65fbf571023f..8cb86cfc9719 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -8,7 +8,6 @@
 
 #include <linux/limits.h>
 #include <linux/ioctl.h>
-#include <linux/blk_types.h>
 #include <linux/types.h>
 
 /*
@@ -118,65 +117,6 @@ struct inodes_stat_t {
 #define FMODE_NONOTIFY          ((__force fmode_t)0x1000000)
 
 /*
- * The below are the various read and write types that we support. Some of
- * them include behavioral modifiers that send information down to the
- * block layer and IO scheduler. Terminology:
- *
- *      The block layer uses device plugging to defer IO a little bit, in
- *      the hope that we will see more IO very shortly. This increases
- *      coalescing of adjacent IO and thus reduces the number of IOs we
- *      have to send to the device. It also allows for better queuing,
- *      if the IO isn't mergeable. If the caller is going to be waiting
- *      for the IO, then he must ensure that the device is unplugged so
- *      that the IO is dispatched to the driver.
- *
- *      All IO is handled async in Linux. This is fine for background
- *      writes, but for reads or writes that someone waits for completion
- *      on, we want to notify the block layer and IO scheduler so that they
- *      know about it. That allows them to make better scheduling
- *      decisions. So when the below references 'sync' and 'async', it
- *      is referencing this priority hint.
- *
- * With that in mind, the available types are:
- *
- * READ                 A normal read operation. Device will be plugged.
- * READ_SYNC            A synchronous read. Device is not plugged, caller can
- *                      immediately wait on this read without caring about
- *                      unplugging.
- * READA                Used for read-ahead operations. Lower priority, and the
- *                      block layer could (in theory) choose to ignore this
- *                      request if it runs into resource problems.
- * WRITE                A normal async write. Device will be plugged.
- * WRITE_SYNC           Synchronous write. Identical to WRITE, but passes down
- *                      the hint that someone will be waiting on this IO
- *                      shortly. The write equivalent of READ_SYNC.
- * WRITE_ODIRECT        Special case write for O_DIRECT only.
- * WRITE_FLUSH          Like WRITE_SYNC but with preceding cache flush.
- * WRITE_FUA            Like WRITE_SYNC but data is guaranteed to be on
- *                      non-volatile media on completion.
- * WRITE_FLUSH_FUA      Combination of WRITE_FLUSH and FUA. The IO is preceded
- *                      by a cache flush and data is guaranteed to be on
- *                      non-volatile media on completion.
- *
- */
-#define RW_MASK                 REQ_WRITE
-#define RWA_MASK                REQ_RAHEAD
-
-#define READ                    0
-#define WRITE                   RW_MASK
-#define READA                   RWA_MASK
-#define KERNEL_READ             (READ|REQ_KERNEL)
-#define KERNEL_WRITE            (WRITE|REQ_KERNEL)
-
-#define READ_SYNC               (READ | REQ_SYNC)
-#define WRITE_SYNC              (WRITE | REQ_SYNC | REQ_NOIDLE)
-#define WRITE_ODIRECT           (WRITE | REQ_SYNC)
-#define WRITE_FLUSH             (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
-#define WRITE_FUA               (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
-#define WRITE_FLUSH_FUA         (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
-
-
-/*
  * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
  * that indicates that they should check the contents of the iovec are
  * valid, but not check the memory that the iovec elements
@@ -417,6 +357,7 @@ struct inodes_stat_t {
 #include <linux/uidgid.h>
 #include <linux/lockdep.h>
 #include <linux/percpu-rwsem.h>
+#include <linux/blk_types.h>
 
 #include <asm/byteorder.h>
 
@@ -454,6 +395,64 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
                         bool is_async);
 
 /*
+ * The below are the various read and write types that we support. Some of
+ * them include behavioral modifiers that send information down to the
+ * block layer and IO scheduler. Terminology:
+ *
+ *      The block layer uses device plugging to defer IO a little bit, in
+ *      the hope that we will see more IO very shortly. This increases
+ *      coalescing of adjacent IO and thus reduces the number of IOs we
+ *      have to send to the device. It also allows for better queuing,
+ *      if the IO isn't mergeable. If the caller is going to be waiting
+ *      for the IO, then he must ensure that the device is unplugged so
+ *      that the IO is dispatched to the driver.
+ *
+ *      All IO is handled async in Linux. This is fine for background
+ *      writes, but for reads or writes that someone waits for completion
+ *      on, we want to notify the block layer and IO scheduler so that they
+ *      know about it. That allows them to make better scheduling
+ *      decisions. So when the below references 'sync' and 'async', it
+ *      is referencing this priority hint.
+ *
+ * With that in mind, the available types are:
+ *
+ * READ                 A normal read operation. Device will be plugged.
+ * READ_SYNC            A synchronous read. Device is not plugged, caller can
+ *                      immediately wait on this read without caring about
+ *                      unplugging.
+ * READA                Used for read-ahead operations. Lower priority, and the
+ *                      block layer could (in theory) choose to ignore this
+ *                      request if it runs into resource problems.
+ * WRITE                A normal async write. Device will be plugged.
+ * WRITE_SYNC           Synchronous write. Identical to WRITE, but passes down
+ *                      the hint that someone will be waiting on this IO
+ *                      shortly. The write equivalent of READ_SYNC.
+ * WRITE_ODIRECT        Special case write for O_DIRECT only.
+ * WRITE_FLUSH          Like WRITE_SYNC but with preceding cache flush.
+ * WRITE_FUA            Like WRITE_SYNC but data is guaranteed to be on
+ *                      non-volatile media on completion.
+ * WRITE_FLUSH_FUA      Combination of WRITE_FLUSH and FUA. The IO is preceded
+ *                      by a cache flush and data is guaranteed to be on
+ *                      non-volatile media on completion.
+ *
+ */
+#define RW_MASK                 REQ_WRITE
+#define RWA_MASK                REQ_RAHEAD
+
+#define READ                    0
+#define WRITE                   RW_MASK
+#define READA                   RWA_MASK
+#define KERNEL_READ             (READ|REQ_KERNEL)
+#define KERNEL_WRITE            (WRITE|REQ_KERNEL)
+
+#define READ_SYNC               (READ | REQ_SYNC)
+#define WRITE_SYNC              (WRITE | REQ_SYNC | REQ_NOIDLE)
+#define WRITE_ODIRECT           (WRITE | REQ_SYNC)
+#define WRITE_FLUSH             (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
+#define WRITE_FUA               (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
+#define WRITE_FLUSH_FUA         (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
+
+/*
  * Attribute flags.  These should be or-ed together to figure out what
  * has been changed!
  */