Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 104 insertions, 0 deletions

diff --git a/include/linux/dtlk.h b/include/linux/dtlk.h
new file mode 100644
index 000000000000..2896d90118a9
--- /dev/null
+++ b/include/linux/dtlk.h
@@ -0,0 +1,104 @@
+#if 0
+
+#define TRACE_TXT(text) \
+        { \
+          if(dtlk_trace) \
+          { \
+            console_print(text); \
+            console_print("\n"); \
+          } \
+        }
+
+#define TRACE_CHR(chr) \
+        { \
+          if(dtlk_trace) \
+            console_print(chr); \
+        } \
+
+#endif
+
+#define DTLK_MINOR      0
+#define DTLK_IO_EXTENT  0x02
+
+        /* ioctl's use magic number of 0xa3 */
+#define DTLK_INTERROGATE 0xa390 /* get settings from the DoubleTalk */
+#define DTLK_STATUS 0xa391      /* get status from the DoubleTalk */
+
+
+#define DTLK_CLEAR 0x18         /* stops speech */
+
+#define DTLK_MAX_RETRIES (loops_per_jiffy/(10000/HZ))
+
+        /* TTS Port Status Flags */
+#define TTS_READABLE     0x80   /* mask for bit which is nonzero if a
+                                   byte can be read from the TTS port */
+#define TTS_SPEAKING     0x40   /* mask for SYNC bit, which is nonzero
+                                   while DoubleTalk is producing
+                                   output with TTS, PCM or CVSD
+                                   synthesizers or tone generators
+                                   (that is, all but LPC) */
+#define TTS_SPEAKING2    0x20   /* mask for SYNC2 bit,
+                                   which falls to zero up to 0.4 sec
+                                   before speech stops */
+#define TTS_WRITABLE     0x10   /* mask for RDY bit, which when set to
+                                   1, indicates the TTS port is ready
+                                   to accept a byte of data.  The RDY
+                                   bit goes zero 2-3 usec after
+                                   writing, and goes 1 again 180-190
+                                   usec later. */
+#define TTS_ALMOST_FULL  0x08   /* mask for AF bit: When set to 1,
+                                   indicates that less than 300 free
+                                   bytes are available in the TTS
+                                   input buffer. AF is always 0 in the
+                                   PCM, TGN and CVSD modes. */
+#define TTS_ALMOST_EMPTY 0x04   /* mask for AE bit: When set to 1,
+                                   indicates that less than 300 bytes
+                                   of data remain in DoubleTalk's
+                                   input (TTS or PCM) buffer. AE is
+                                   always 1 in the TGN and CVSD
+                                   modes. */
+
+        /* LPC speak commands */
+#define LPC_5220_NORMAL 0x60    /* 5220 format decoding table, normal rate */
+#define LPC_5220_FAST 0x64      /* 5220 format decoding table, fast rate */
+#define LPC_D6_NORMAL 0x20      /* D6 format decoding table, normal rate */
+#define LPC_D6_FAST 0x24        /* D6 format decoding table, fast rate */
+
+        /* LPC Port Status Flags (valid only after one of the LPC
+           speak commands) */
+#define LPC_SPEAKING     0x80   /* mask for TS bit: When set to 1,
+                                   indicates the LPC synthesizer is
+                                   producing speech.*/
+#define LPC_BUFFER_LOW   0x40   /* mask for BL bit: When set to 1,
+                                   indicates that the hardware LPC
+                                   data buffer has less than 30 bytes
+                                   remaining. (Total internal buffer
+                                   size = 4096 bytes.) */
+#define LPC_BUFFER_EMPTY 0x20   /* mask for BE bit: When set to 1,
+                                   indicates that the LPC data buffer
+                                   ran out of data (error condition if
+                                   TS is also 1).  */
+
+                                /* data returned by Interrogate command */
+struct dtlk_settings
+{
+  unsigned short serial_number; /* 0-7Fh:0-7Fh */
+  unsigned char rom_version[24]; /* null terminated string */
+  unsigned char mode;           /* 0=Character; 1=Phoneme; 2=Text */
+  unsigned char punc_level;     /* nB; 0-7 */
+  unsigned char formant_freq;   /* nF; 0-9 */
+  unsigned char pitch;          /* nP; 0-99 */
+  unsigned char speed;          /* nS; 0-9 */
+  unsigned char volume;         /* nV; 0-9 */
+  unsigned char tone;           /* nX; 0-2 */
+  unsigned char expression;     /* nE; 0-9 */
+  unsigned char ext_dict_loaded; /* 1=exception dictionary loaded */
+  unsigned char ext_dict_status; /* 1=exception dictionary enabled */
+  unsigned char free_ram;       /* # pages (truncated) remaining for
+                                   text buffer */
+  unsigned char articulation;   /* nA; 0-9 */
+  unsigned char reverb;         /* nR; 0-9 */
+  unsigned char eob;            /* 7Fh value indicating end of
+                                   parameter block */
+  unsigned char has_indexing;   /* nonzero if indexing is implemented */
+};