Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 827 insertions, 0 deletions

diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
new file mode 100644
index 000000000000..46d8254c1a79
--- /dev/null
+++ b/include/linux/cyclades.h
@@ -0,0 +1,827 @@
+/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+ * linux/include/linux/cyclades.h
+ *
+ * This file was initially written by
+ * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
+ * Ivan Passos <ivan@cyclades.com>.
+ *
+ * This file contains the general definitions for the cyclades.c driver
+ *$Log: cyclades.h,v $
+ *Revision 3.1  2002/01/29 11:36:16  henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
+ *Revision 3.1  2000/04/19 18:52:52  ivan
+ *converted address fields to unsigned long and added fields for physical
+ *addresses on cyclades_card structure;
+ *
+ *Revision 3.0  1998/11/02 14:20:59  ivan
+ *added nports field on cyclades_card structure;
+ *
+ *Revision 2.5  1998/08/03 16:57:01  ivan
+ *added cyclades_idle_stats structure;
+ * 
+ *Revision 2.4  1998/06/01 12:09:53  ivan
+ *removed closing_wait2 from cyclades_port structure;
+ *
+ *Revision 2.3  1998/03/16 18:01:12  ivan
+ *changes in the cyclades_port structure to get it closer to the 
+ *standard serial port structure;
+ *added constants for new ioctls;
+ *
+ *Revision 2.2  1998/02/17 16:50:00  ivan
+ *changes in the cyclades_port structure (addition of shutdown_wait and 
+ *chip_rev variables);
+ *added constants for new ioctls and for CD1400 rev. numbers.
+ *
+ *Revision 2.1  1997/10/24 16:03:00  ivan
+ *added rflow (which allows enabling the CD1400 special flow control 
+ *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
+ *cyclades_port structure;
+ *added Alpha support
+ *
+ *Revision 2.0  1997/06/30 10:30:00  ivan
+ *added some new doorbell command constants related to IOCTLW and
+ *UART error signaling
+ *
+ *Revision 1.8  1997/06/03 15:30:00  ivan
+ *added constant ZFIRM_HLT
+ *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
+ *
+ *Revision 1.7  1997/03/26 10:30:00  daniel
+ *new entries at the end of cyclades_port struct to reallocate
+ *variables illegally allocated within card memory.
+ *
+ *Revision 1.6  1996/09/09 18:35:30  bentson
+ *fold in changes for Cyclom-Z -- including structures for
+ *communicating with board as well modest changes to original
+ *structures to support new features.
+ *
+ *Revision 1.5  1995/11/13 21:13:31  bentson
+ *changes suggested by Michael Chastain <mec@duracef.shout.net>
+ *to support use of this file in non-kernel applications
+ *
+ *
+ */
+
+#ifndef _LINUX_CYCLADES_H
+#define _LINUX_CYCLADES_H
+
+struct cyclades_monitor {
+        unsigned long           int_count;
+        unsigned long           char_count;
+        unsigned long           char_max;
+        unsigned long           char_last;
+};
+
+/*
+ * These stats all reflect activity since the device was last initialized.
+ * (i.e., since the port was opened with no other processes already having it
+ * open)
+ */
+struct cyclades_idle_stats {
+    time_t         in_use;      /* Time device has been in use (secs) */
+    time_t         recv_idle;   /* Time since last char received (secs) */
+    time_t         xmit_idle;   /* Time since last char transmitted (secs) */
+    unsigned long  recv_bytes;  /* Bytes received */
+    unsigned long  xmit_bytes;  /* Bytes transmitted */
+    unsigned long  overruns;    /* Input overruns */
+    unsigned long  frame_errs;  /* Input framing errors */
+    unsigned long  parity_errs; /* Input parity errors */
+};
+
+#define CYCLADES_MAGIC  0x4359
+
+#define CYGETMON                0x435901
+#define CYGETTHRESH             0x435902
+#define CYSETTHRESH             0x435903
+#define CYGETDEFTHRESH          0x435904
+#define CYSETDEFTHRESH          0x435905
+#define CYGETTIMEOUT            0x435906
+#define CYSETTIMEOUT            0x435907
+#define CYGETDEFTIMEOUT         0x435908
+#define CYSETDEFTIMEOUT         0x435909
+#define CYSETRFLOW              0x43590a
+#define CYGETRFLOW              0x43590b
+#define CYSETRTSDTR_INV         0x43590c
+#define CYGETRTSDTR_INV         0x43590d
+#define CYZSETPOLLCYCLE         0x43590e
+#define CYZGETPOLLCYCLE         0x43590f
+#define CYGETCD1400VER          0x435910
+#define CYGETCARDINFO           0x435911
+#define CYSETWAIT               0x435912
+#define CYGETWAIT               0x435913
+
+/*************** CYCLOM-Z ADDITIONS ***************/
+
+#define CZIOC           ('M' << 8)
+#define CZ_NBOARDS      (CZIOC|0xfa)
+#define CZ_BOOT_START   (CZIOC|0xfb)
+#define CZ_BOOT_DATA    (CZIOC|0xfc)
+#define CZ_BOOT_END     (CZIOC|0xfd)
+#define CZ_TEST         (CZIOC|0xfe)
+
+#define CZ_DEF_POLL     (HZ/25)
+
+#define MAX_BOARD       4       /* Max number of boards */
+#define MAX_DEV         256     /* Max number of ports total */
+#define CYZ_MAX_SPEED   921600
+
+#define CYZ_FIFO_SIZE   16
+
+#define CYZ_BOOT_NWORDS 0x100
+struct CYZ_BOOT_CTRL {
+        unsigned short  nboard;
+        int             status[MAX_BOARD];
+        int             nchannel[MAX_BOARD];
+        int             fw_rev[MAX_BOARD];
+        unsigned long   offset;
+        unsigned long   data[CYZ_BOOT_NWORDS];
+};
+
+
+#ifndef DP_WINDOW_SIZE
+/* #include "cyclomz.h" */
+/****************** ****************** *******************/
+/*
+ *      The data types defined below are used in all ZFIRM interface
+ *      data structures. They accomodate differences between HW
+ *      architectures and compilers.
+ */
+
+#if defined(__alpha__)
+typedef unsigned long   ucdouble;       /* 64 bits, unsigned */
+typedef unsigned int    uclong;         /* 32 bits, unsigned */
+#else
+typedef unsigned long   uclong;         /* 32 bits, unsigned */
+#endif
+typedef unsigned short  ucshort;        /* 16 bits, unsigned */
+typedef unsigned char   ucchar;         /* 8 bits, unsigned */
+
+/*
+ *      Memory Window Sizes
+ */
+
+#define DP_WINDOW_SIZE          (0x00080000)    /* window size 512 Kb */
+#define ZE_DP_WINDOW_SIZE       (0x00100000)    /* window size 1 Mb (Ze and
+                                                  8Zo V.2 */
+#define CTRL_WINDOW_SIZE        (0x00000080)    /* runtime regs 128 bytes */
+
+/*
+ *      CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
+ *      normally will access only interested on the fpga_id, fpga_version,
+ *      start_cpu and stop_cpu.
+ */
+
+struct  CUSTOM_REG {
+        uclong  fpga_id;                /* FPGA Identification Register */
+        uclong  fpga_version;           /* FPGA Version Number Register */
+        uclong  cpu_start;              /* CPU start Register (write) */
+        uclong  cpu_stop;               /* CPU stop Register (write) */
+        uclong  misc_reg;               /* Miscelaneous Register */
+        uclong  idt_mode;               /* IDT mode Register */
+        uclong  uart_irq_status;        /* UART IRQ status Register */
+        uclong  clear_timer0_irq;       /* Clear timer interrupt Register */
+        uclong  clear_timer1_irq;       /* Clear timer interrupt Register */
+        uclong  clear_timer2_irq;       /* Clear timer interrupt Register */
+        uclong  test_register;          /* Test Register */
+        uclong  test_count;             /* Test Count Register */
+        uclong  timer_select;           /* Timer select register */
+        uclong  pr_uart_irq_status;     /* Prioritized UART IRQ stat Reg */
+        uclong  ram_wait_state;         /* RAM wait-state Register */
+        uclong  uart_wait_state;        /* UART wait-state Register */
+        uclong  timer_wait_state;       /* timer wait-state Register */
+        uclong  ack_wait_state;         /* ACK wait State Register */
+};
+
+/*
+ *      RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
+ *      registers. This structure can be used to access the 9060 registers
+ *      (memory mapped).
+ */
+
+struct RUNTIME_9060 {
+        uclong  loc_addr_range; /* 00h - Local Address Range */
+        uclong  loc_addr_base;  /* 04h - Local Address Base */
+        uclong  loc_arbitr;     /* 08h - Local Arbitration */
+        uclong  endian_descr;   /* 0Ch - Big/Little Endian Descriptor */
+        uclong  loc_rom_range;  /* 10h - Local ROM Range */
+        uclong  loc_rom_base;   /* 14h - Local ROM Base */
+        uclong  loc_bus_descr;  /* 18h - Local Bus descriptor */
+        uclong  loc_range_mst;  /* 1Ch - Local Range for Master to PCI */
+        uclong  loc_base_mst;   /* 20h - Local Base for Master PCI */
+        uclong  loc_range_io;   /* 24h - Local Range for Master IO */
+        uclong  pci_base_mst;   /* 28h - PCI Base for Master PCI */
+        uclong  pci_conf_io;    /* 2Ch - PCI configuration for Master IO */
+        uclong  filler1;        /* 30h */
+        uclong  filler2;        /* 34h */
+        uclong  filler3;        /* 38h */
+        uclong  filler4;        /* 3Ch */
+        uclong  mail_box_0;     /* 40h - Mail Box 0 */
+        uclong  mail_box_1;     /* 44h - Mail Box 1 */
+        uclong  mail_box_2;     /* 48h - Mail Box 2 */
+        uclong  mail_box_3;     /* 4Ch - Mail Box 3 */
+        uclong  filler5;        /* 50h */
+        uclong  filler6;        /* 54h */
+        uclong  filler7;        /* 58h */
+        uclong  filler8;        /* 5Ch */
+        uclong  pci_doorbell;   /* 60h - PCI to Local Doorbell */
+        uclong  loc_doorbell;   /* 64h - Local to PCI Doorbell */
+        uclong  intr_ctrl_stat; /* 68h - Interrupt Control/Status */
+        uclong  init_ctrl;      /* 6Ch - EEPROM control, Init Control, etc */
+};
+
+/* Values for the Local Base Address re-map register */
+
+#define WIN_RAM         0x00000001L     /* set the sliding window to RAM */
+#define WIN_CREG        0x14000001L     /* set the window to custom Registers */
+
+/* Values timer select registers */
+
+#define TIMER_BY_1M     0x00            /* clock divided by 1M */
+#define TIMER_BY_256K   0x01            /* clock divided by 256k */
+#define TIMER_BY_128K   0x02            /* clock divided by 128k */
+#define TIMER_BY_32K    0x03            /* clock divided by 32k */
+
+/****************** ****************** *******************/
+#endif
+
+#ifndef ZFIRM_ID
+/* #include "zfwint.h" */
+/****************** ****************** *******************/
+/*
+ *      This file contains the definitions for interfacing with the
+ *      Cyclom-Z ZFIRM Firmware.
+ */
+
+/* General Constant definitions */
+
+#define MAX_CHAN        64              /* max number of channels per board */
+
+/* firmware id structure (set after boot) */
+
+#define ID_ADDRESS      0x00000180L     /* signature/pointer address */
+#define ZFIRM_ID        0x5557465AL     /* ZFIRM/U signature */
+#define ZFIRM_HLT       0x59505B5CL     /* ZFIRM needs external power supply */
+#define ZFIRM_RST       0x56040674L     /* RST signal (due to FW reset) */
+
+#define ZF_TINACT_DEF   1000            /* default inactivity timeout 
+                                           (1000 ms) */
+#define ZF_TINACT       ZF_TINACT_DEF
+
+struct  FIRM_ID {
+        uclong  signature;              /* ZFIRM/U signature */
+        uclong  zfwctrl_addr;           /* pointer to ZFW_CTRL structure */
+};
+
+/* Op. System id */
+
+#define C_OS_LINUX      0x00000030      /* generic Linux system */
+
+/* channel op_mode */
+
+#define C_CH_DISABLE    0x00000000      /* channel is disabled */
+#define C_CH_TXENABLE   0x00000001      /* channel Tx enabled */
+#define C_CH_RXENABLE   0x00000002      /* channel Rx enabled */
+#define C_CH_ENABLE     0x00000003      /* channel Tx/Rx enabled */
+#define C_CH_LOOPBACK   0x00000004      /* Loopback mode */
+
+/* comm_parity - parity */
+
+#define C_PR_NONE       0x00000000      /* None */
+#define C_PR_ODD        0x00000001      /* Odd */
+#define C_PR_EVEN       0x00000002      /* Even */
+#define C_PR_MARK       0x00000004      /* Mark */
+#define C_PR_SPACE      0x00000008      /* Space */
+#define C_PR_PARITY     0x000000ff
+
+#define C_PR_DISCARD    0x00000100      /* discard char with frame/par error */
+#define C_PR_IGNORE     0x00000200      /* ignore frame/par error */
+
+/* comm_data_l - data length and stop bits */
+
+#define C_DL_CS5        0x00000001
+#define C_DL_CS6        0x00000002
+#define C_DL_CS7        0x00000004
+#define C_DL_CS8        0x00000008
+#define C_DL_CS         0x0000000f
+#define C_DL_1STOP      0x00000010
+#define C_DL_15STOP     0x00000020
+#define C_DL_2STOP      0x00000040
+#define C_DL_STOP       0x000000f0
+
+/* interrupt enabling/status */
+
+#define C_IN_DISABLE    0x00000000      /* zero, disable interrupts */
+#define C_IN_TXBEMPTY   0x00000001      /* tx buffer empty */
+#define C_IN_TXLOWWM    0x00000002      /* tx buffer below LWM */
+#define C_IN_RXHIWM     0x00000010      /* rx buffer above HWM */
+#define C_IN_RXNNDT     0x00000020      /* rx no new data timeout */
+#define C_IN_MDCD       0x00000100      /* modem DCD change */
+#define C_IN_MDSR       0x00000200      /* modem DSR change */
+#define C_IN_MRI        0x00000400      /* modem RI change */
+#define C_IN_MCTS       0x00000800      /* modem CTS change */
+#define C_IN_RXBRK      0x00001000      /* Break received */
+#define C_IN_PR_ERROR   0x00002000      /* parity error */
+#define C_IN_FR_ERROR   0x00004000      /* frame error */
+#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
+#define C_IN_RXOFL      0x00010000      /* RX buffer overflow */
+#define C_IN_IOCTLW     0x00020000      /* I/O control w/ wait */
+#define C_IN_MRTS       0x00040000      /* modem RTS drop */
+#define C_IN_ICHAR      0x00080000
+ 
+/* flow control */
+
+#define C_FL_OXX        0x00000001      /* output Xon/Xoff flow control */
+#define C_FL_IXX        0x00000002      /* output Xon/Xoff flow control */
+#define C_FL_OIXANY     0x00000004      /* output Xon/Xoff (any xon) */
+#define C_FL_SWFLOW     0x0000000f
+
+/* flow status */
+
+#define C_FS_TXIDLE     0x00000000      /* no Tx data in the buffer or UART */
+#define C_FS_SENDING    0x00000001      /* UART is sending data */
+#define C_FS_SWFLOW     0x00000002      /* Tx is stopped by received Xoff */
+
+/* rs_control/rs_status RS-232 signals */
+
+#define C_RS_PARAM      0x80000000      /* Indicates presence of parameter in 
+                                           IOCTLM command */
+#define C_RS_RTS        0x00000001      /* RTS */
+#define C_RS_DTR        0x00000004      /* DTR */
+#define C_RS_DCD        0x00000100      /* CD */
+#define C_RS_DSR        0x00000200      /* DSR */
+#define C_RS_RI         0x00000400      /* RI */
+#define C_RS_CTS        0x00000800      /* CTS */
+
+/* commands Host <-> Board */
+
+#define C_CM_RESET      0x01            /* reset/flush buffers */
+#define C_CM_IOCTL      0x02            /* re-read CH_CTRL */
+#define C_CM_IOCTLW     0x03            /* re-read CH_CTRL, intr when done */
+#define C_CM_IOCTLM     0x04            /* RS-232 outputs change */
+#define C_CM_SENDXOFF   0x10            /* send Xoff */
+#define C_CM_SENDXON    0x11            /* send Xon */
+#define C_CM_CLFLOW     0x12            /* Clear flow control (resume) */
+#define C_CM_SENDBRK    0x41            /* send break */
+#define C_CM_INTBACK    0x42            /* Interrupt back */
+#define C_CM_SET_BREAK  0x43            /* Tx break on */
+#define C_CM_CLR_BREAK  0x44            /* Tx break off */
+#define C_CM_CMD_DONE   0x45            /* Previous command done */
+#define C_CM_INTBACK2   0x46            /* Alternate Interrupt back */
+#define C_CM_TINACT     0x51            /* set inactivity detection */
+#define C_CM_IRQ_ENBL   0x52            /* enable generation of interrupts */
+#define C_CM_IRQ_DSBL   0x53            /* disable generation of interrupts */
+#define C_CM_ACK_ENBL   0x54            /* enable acknowledged interrupt mode */
+#define C_CM_ACK_DSBL   0x55            /* disable acknowledged intr mode */
+#define C_CM_FLUSH_RX   0x56            /* flushes Rx buffer */
+#define C_CM_FLUSH_TX   0x57            /* flushes Tx buffer */
+#define C_CM_Q_ENABLE   0x58            /* enables queue access from the 
+                                           driver */
+#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
+                                           driver */
+
+#define C_CM_TXBEMPTY   0x60            /* Tx buffer is empty */
+#define C_CM_TXLOWWM    0x61            /* Tx buffer low water mark */
+#define C_CM_RXHIWM     0x62            /* Rx buffer high water mark */
+#define C_CM_RXNNDT     0x63            /* rx no new data timeout */
+#define C_CM_TXFEMPTY   0x64
+#define C_CM_ICHAR      0x65
+#define C_CM_MDCD       0x70            /* modem DCD change */
+#define C_CM_MDSR       0x71            /* modem DSR change */
+#define C_CM_MRI        0x72            /* modem RI change */
+#define C_CM_MCTS       0x73            /* modem CTS change */
+#define C_CM_MRTS       0x74            /* modem RTS drop */
+#define C_CM_RXBRK      0x84            /* Break received */
+#define C_CM_PR_ERROR   0x85            /* Parity error */
+#define C_CM_FR_ERROR   0x86            /* Frame error */
+#define C_CM_OVR_ERROR  0x87            /* Overrun error */
+#define C_CM_RXOFL      0x88            /* RX buffer overflow */
+#define C_CM_CMDERROR   0x90            /* command error */
+#define C_CM_FATAL      0x91            /* fatal error */
+#define C_CM_HW_RESET   0x92            /* reset board */
+
+/*
+ *      CH_CTRL - This per port structure contains all parameters
+ *      that control an specific port. It can be seen as the
+ *      configuration registers of a "super-serial-controller".
+ */
+
+struct CH_CTRL {
+        uclong  op_mode;        /* operation mode */
+        uclong  intr_enable;    /* interrupt masking */
+        uclong  sw_flow;        /* SW flow control */
+        uclong  flow_status;    /* output flow status */
+        uclong  comm_baud;      /* baud rate  - numerically specified */
+        uclong  comm_parity;    /* parity */
+        uclong  comm_data_l;    /* data length/stop */
+        uclong  comm_flags;     /* other flags */
+        uclong  hw_flow;        /* HW flow control */
+        uclong  rs_control;     /* RS-232 outputs */
+        uclong  rs_status;      /* RS-232 inputs */
+        uclong  flow_xon;       /* xon char */
+        uclong  flow_xoff;      /* xoff char */
+        uclong  hw_overflow;    /* hw overflow counter */
+        uclong  sw_overflow;    /* sw overflow counter */
+        uclong  comm_error;     /* frame/parity error counter */
+        uclong ichar;
+        uclong filler[7];
+};
+
+
+/*
+ *      BUF_CTRL - This per channel structure contains
+ *      all Tx and Rx buffer control for a given channel.
+ */
+
+struct  BUF_CTRL        {
+        uclong  flag_dma;       /* buffers are in Host memory */
+        uclong  tx_bufaddr;     /* address of the tx buffer */
+        uclong  tx_bufsize;     /* tx buffer size */
+        uclong  tx_threshold;   /* tx low water mark */
+        uclong  tx_get;         /* tail index tx buf */
+        uclong  tx_put;         /* head index tx buf */
+        uclong  rx_bufaddr;     /* address of the rx buffer */
+        uclong  rx_bufsize;     /* rx buffer size */
+        uclong  rx_threshold;   /* rx high water mark */
+        uclong  rx_get;         /* tail index rx buf */
+        uclong  rx_put;         /* head index rx buf */
+        uclong  filler[5];      /* filler to align structures */
+};
+
+/*
+ *      BOARD_CTRL - This per board structure contains all global 
+ *      control fields related to the board.
+ */
+
+struct BOARD_CTRL {
+
+        /* static info provided by the on-board CPU */
+        uclong  n_channel;      /* number of channels */
+        uclong  fw_version;     /* firmware version */
+
+        /* static info provided by the driver */
+        uclong  op_system;      /* op_system id */
+        uclong  dr_version;     /* driver version */
+
+        /* board control area */
+        uclong  inactivity;     /* inactivity control */
+
+        /* host to FW commands */
+        uclong  hcmd_channel;   /* channel number */
+        uclong  hcmd_param;     /* pointer to parameters */
+
+        /* FW to Host commands */
+        uclong  fwcmd_channel;  /* channel number */
+        uclong  fwcmd_param;    /* pointer to parameters */
+        uclong  zf_int_queue_addr; /* offset for INT_QUEUE structure */
+
+        /* filler so the structures are aligned */
+        uclong  filler[6];
+};
+
+/* Host Interrupt Queue */
+
+#define QUEUE_SIZE      (10*MAX_CHAN)
+
+struct  INT_QUEUE {
+        unsigned char   intr_code[QUEUE_SIZE];
+        unsigned long   channel[QUEUE_SIZE];
+        unsigned long   param[QUEUE_SIZE];
+        unsigned long   put;
+        unsigned long   get;
+};
+
+/*
+ *      ZFW_CTRL - This is the data structure that includes all other
+ *      data structures used by the Firmware.
+ */
+ 
+struct ZFW_CTRL {
+        struct BOARD_CTRL       board_ctrl;
+        struct CH_CTRL          ch_ctrl[MAX_CHAN];
+        struct BUF_CTRL         buf_ctrl[MAX_CHAN];
+};
+
+/****************** ****************** *******************/
+#endif
+
+/* Per card data structure */
+struct resource;
+struct cyclades_card {
+    unsigned long base_phys;
+    unsigned long ctl_phys;
+    void __iomem *base_addr;
+    void __iomem *ctl_addr;
+    int irq;
+    int num_chips;      /* 0 if card absent, -1 if Z/PCI, else Y */
+    int first_line;     /* minor number of first channel on card */
+    int nports;         /* Number of ports in the card */
+    int bus_index;      /* address shift - 0 for ISA, 1 for PCI */
+    int intr_enabled;   /* FW Interrupt flag - 0 disabled, 1 enabled */
+    struct pci_dev *pdev;
+#ifdef __KERNEL__
+    spinlock_t card_lock;
+#else
+    unsigned long filler;
+#endif
+};
+
+struct cyclades_chip {
+  int filler;
+};
+
+
+#ifdef __KERNEL__
+
+/***************************************
+ * Memory access functions/macros      *
+ * (required to support Alpha systems) *
+ ***************************************/
+
+#define cy_writeb(port,val)     {writeb((val),(port)); mb();}
+#define cy_writew(port,val)     {writew((val),(port)); mb();}
+#define cy_writel(port,val)     {writel((val),(port)); mb();}
+
+#define cy_readb(port)  readb(port)
+#define cy_readw(port)  readw(port)
+#define cy_readl(port)  readl(port)
+
+/*
+ * Statistics counters
+ */
+struct cyclades_icount {
+        __u32   cts, dsr, rng, dcd, tx, rx;
+        __u32   frame, parity, overrun, brk;
+        __u32   buf_overrun;
+};
+
+/*
+ * This is our internal structure for each serial port's state.
+ * 
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+struct cyclades_port {
+        int                     magic;
+        int                     card;
+        int                     line;
+        int                     flags;          /* defined in tty.h */
+        int                     type;           /* UART type */
+        struct tty_struct       *tty;
+        int                     read_status_mask;
+        int                     ignore_status_mask;
+        int                     timeout;
+        int                     xmit_fifo_size;
+        int                     cor1,cor2,cor3,cor4,cor5;
+        int                     tbpr,tco,rbpr,rco;
+        int                     baud;
+        int                     rflow;
+        int                     rtsdtr_inv;
+        int                     chip_rev;
+        int                     custom_divisor;
+        int                     x_char; /* to be pushed out ASAP */
+        int                     close_delay;
+        unsigned short          closing_wait;
+        unsigned long           event;
+        unsigned long           last_active;
+        int                     count;  /* # of fd on device */
+        int                     breakon;
+        int                     breakoff;
+        int                     blocked_open; /* # of blocked opens */
+        unsigned char           *xmit_buf;
+        int                     xmit_head;
+        int                     xmit_tail;
+        int                     xmit_cnt;
+        int                     default_threshold;
+        int                     default_timeout;
+        unsigned long           jiffies[3];
+        unsigned long           rflush_count;
+        struct cyclades_monitor mon;
+        struct cyclades_idle_stats      idle_stats;
+        struct cyclades_icount  icount;
+        struct work_struct      tqueue;
+        wait_queue_head_t       open_wait;
+        wait_queue_head_t       close_wait;
+        wait_queue_head_t       shutdown_wait;
+        wait_queue_head_t       delta_msr_wait;
+        int throttle;
+};
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at cy interrupt time.
+ */
+#define Cy_EVENT_READ_PROCESS           0
+#define Cy_EVENT_WRITE_WAKEUP           1
+#define Cy_EVENT_HANGUP                 2
+#define Cy_EVENT_BREAK                  3
+#define Cy_EVENT_OPEN_WAKEUP            4
+#define Cy_EVENT_SHUTDOWN_WAKEUP        5
+#define Cy_EVENT_DELTA_WAKEUP           6
+#define Cy_EVENT_Z_RX_FULL              7
+
+#define CLOSING_WAIT_DELAY      30*HZ
+#define CY_CLOSING_WAIT_NONE    65535
+#define CY_CLOSING_WAIT_INF     0
+
+
+#define CyMAX_CHIPS_PER_CARD    8
+#define CyMAX_CHAR_FIFO         12
+#define CyPORTS_PER_CHIP        4
+#define CD1400_MAX_SPEED        115200
+
+#define CyISA_Ywin      0x2000
+
+#define CyPCI_Ywin      0x4000
+#define CyPCI_Yctl      0x80
+#define CyPCI_Zctl      CTRL_WINDOW_SIZE
+#define CyPCI_Zwin      0x80000
+#define CyPCI_Ze_win    (2 * CyPCI_Zwin)
+
+#define PCI_DEVICE_ID_MASK      0x06
+
+/**** CD1400 registers ****/
+
+#define CD1400_REV_G    0x46
+#define CD1400_REV_J    0x48
+
+#define CyRegSize       0x0400
+#define Cy_HwReset      0x1400
+#define Cy_ClrIntr      0x1800
+#define Cy_EpldRev      0x1e00
+
+/* Global Registers */
+
+#define CyGFRCR         (0x40*2)
+#define      CyRevE             (44)
+#define CyCAR           (0x68*2)
+#define      CyCHAN_0           (0x00)
+#define      CyCHAN_1           (0x01)
+#define      CyCHAN_2           (0x02)
+#define      CyCHAN_3           (0x03)
+#define CyGCR           (0x4B*2)
+#define      CyCH0_SERIAL       (0x00)
+#define      CyCH0_PARALLEL     (0x80)
+#define CySVRR          (0x67*2)
+#define      CySRModem          (0x04)
+#define      CySRTransmit       (0x02)
+#define      CySRReceive        (0x01)
+#define CyRICR          (0x44*2)
+#define CyTICR          (0x45*2)
+#define CyMICR          (0x46*2)
+#define      CyICR0             (0x00)
+#define      CyICR1             (0x01)
+#define      CyICR2             (0x02)
+#define      CyICR3             (0x03)
+#define CyRIR           (0x6B*2)
+#define CyTIR           (0x6A*2)
+#define CyMIR           (0x69*2)
+#define      CyIRDirEq          (0x80)
+#define      CyIRBusy           (0x40)
+#define      CyIRUnfair         (0x20)
+#define      CyIRContext        (0x1C)
+#define      CyIRChannel        (0x03)
+#define CyPPR           (0x7E*2)
+#define      CyCLOCK_20_1MS     (0x27)
+#define      CyCLOCK_25_1MS     (0x31)
+#define      CyCLOCK_25_5MS     (0xf4)
+#define      CyCLOCK_60_1MS     (0x75)
+#define      CyCLOCK_60_2MS     (0xea)
+
+/* Virtual Registers */
+
+#define CyRIVR          (0x43*2)
+#define CyTIVR          (0x42*2)
+#define CyMIVR          (0x41*2)
+#define      CyIVRMask (0x07)
+#define      CyIVRRxEx (0x07)
+#define      CyIVRRxOK (0x03)
+#define      CyIVRTxOK (0x02)
+#define      CyIVRMdmOK (0x01)
+#define CyTDR           (0x63*2)
+#define CyRDSR          (0x62*2)
+#define      CyTIMEOUT          (0x80)
+#define      CySPECHAR          (0x70)
+#define      CyBREAK            (0x08)
+#define      CyPARITY           (0x04)
+#define      CyFRAME            (0x02)
+#define      CyOVERRUN          (0x01)
+#define CyMISR          (0x4C*2)
+/* see CyMCOR_ and CyMSVR_ for bits*/
+#define CyEOSRR         (0x60*2)
+
+/* Channel Registers */
+
+#define CyLIVR          (0x18*2)
+#define      CyMscsr            (0x01)
+#define      CyTdsr             (0x02)
+#define      CyRgdsr            (0x03)
+#define      CyRedsr            (0x07)
+#define CyCCR           (0x05*2)
+/* Format 1 */
+#define      CyCHAN_RESET       (0x80)
+#define      CyCHIP_RESET       (0x81)
+#define      CyFlushTransFIFO   (0x82)
+/* Format 2 */
+#define      CyCOR_CHANGE       (0x40)
+#define      CyCOR1ch           (0x02)
+#define      CyCOR2ch           (0x04)
+#define      CyCOR3ch           (0x08)
+/* Format 3 */
+#define      CySEND_SPEC_1      (0x21)
+#define      CySEND_SPEC_2      (0x22)
+#define      CySEND_SPEC_3      (0x23)
+#define      CySEND_SPEC_4      (0x24)
+/* Format 4 */
+#define      CyCHAN_CTL         (0x10)
+#define      CyDIS_RCVR         (0x01)
+#define      CyENB_RCVR         (0x02)
+#define      CyDIS_XMTR         (0x04)
+#define      CyENB_XMTR         (0x08)
+#define CySRER          (0x06*2)
+#define      CyMdmCh            (0x80)
+#define      CyRxData           (0x10)
+#define      CyTxRdy            (0x04)
+#define      CyTxMpty           (0x02)
+#define      CyNNDT             (0x01)
+#define CyCOR1          (0x08*2)
+#define      CyPARITY_NONE      (0x00)
+#define      CyPARITY_0         (0x20)
+#define      CyPARITY_1         (0xA0)
+#define      CyPARITY_E         (0x40)
+#define      CyPARITY_O         (0xC0)
+#define      Cy_1_STOP          (0x00)
+#define      Cy_1_5_STOP        (0x04)
+#define      Cy_2_STOP          (0x08)
+#define      Cy_5_BITS          (0x00)
+#define      Cy_6_BITS          (0x01)
+#define      Cy_7_BITS          (0x02)
+#define      Cy_8_BITS          (0x03)
+#define CyCOR2          (0x09*2)
+#define      CyIXM              (0x80)
+#define      CyTxIBE            (0x40)
+#define      CyETC              (0x20)
+#define      CyAUTO_TXFL        (0x60)
+#define      CyLLM              (0x10)
+#define      CyRLM              (0x08)
+#define      CyRtsAO            (0x04)
+#define      CyCtsAE            (0x02)
+#define      CyDsrAE            (0x01)
+#define CyCOR3          (0x0A*2)
+#define      CySPL_CH_DRANGE    (0x80)  /* special character detect range */
+#define      CySPL_CH_DET1      (0x40)  /* enable special character detection
+                                                               on SCHR4-SCHR3 */
+#define      CyFL_CTRL_TRNSP    (0x20)  /* Flow Control Transparency */
+#define      CySPL_CH_DET2      (0x10)  /* Enable special character detection
+                                                               on SCHR2-SCHR1 */
+#define      CyREC_FIFO         (0x0F)  /* Receive FIFO threshold */
+#define CyCOR4          (0x1E*2)
+#define CyCOR5          (0x1F*2)
+#define CyCCSR          (0x0B*2)
+#define      CyRxEN             (0x80)
+#define      CyRxFloff          (0x40)
+#define      CyRxFlon           (0x20)
+#define      CyTxEN             (0x08)
+#define      CyTxFloff          (0x04)
+#define      CyTxFlon           (0x02)
+#define CyRDCR          (0x0E*2)
+#define CySCHR1         (0x1A*2)
+#define CySCHR2         (0x1B*2)
+#define CySCHR3         (0x1C*2)
+#define CySCHR4         (0x1D*2)
+#define CySCRL          (0x22*2)
+#define CySCRH          (0x23*2)
+#define CyLNC           (0x24*2)
+#define CyMCOR1         (0x15*2)
+#define CyMCOR2         (0x16*2)
+#define CyRTPR          (0x21*2)
+#define CyMSVR1         (0x6C*2)
+#define CyMSVR2         (0x6D*2)
+#define      CyANY_DELTA        (0xF0)
+#define      CyDSR              (0x80)
+#define      CyCTS              (0x40)
+#define      CyRI               (0x20)
+#define      CyDCD              (0x10)
+#define      CyDTR              (0x02)
+#define      CyRTS              (0x01)
+#define CyPVSR          (0x6F*2)
+#define CyRBPR          (0x78*2)
+#define CyRCOR          (0x7C*2)
+#define CyTBPR          (0x72*2)
+#define CyTCOR          (0x76*2)
+
+/* Custom Registers */
+
+#define CyPLX_VER       (0x3400)
+#define PLX_9050        0x0b
+#define PLX_9060        0x0c
+#define PLX_9080        0x0d
+
+/***************************************************************************/
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_CYCLADES_H */