aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/cyclades.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/cyclades.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/cyclades.h')
-rw-r--r--include/linux/cyclades.h827
1 files changed, 827 insertions, 0 deletions
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
new file mode 100644
index 000000000000..46d8254c1a79
--- /dev/null
+++ b/include/linux/cyclades.h
@@ -0,0 +1,827 @@
1/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
2 * linux/include/linux/cyclades.h
3 *
4 * This file was initially written by
5 * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
6 * Ivan Passos <ivan@cyclades.com>.
7 *
8 * This file contains the general definitions for the cyclades.c driver
9 *$Log: cyclades.h,v $
10 *Revision 3.1 2002/01/29 11:36:16 henrique
11 *added throttle field on struct cyclades_port to indicate whether the
12 *port is throttled or not
13 *
14 *Revision 3.1 2000/04/19 18:52:52 ivan
15 *converted address fields to unsigned long and added fields for physical
16 *addresses on cyclades_card structure;
17 *
18 *Revision 3.0 1998/11/02 14:20:59 ivan
19 *added nports field on cyclades_card structure;
20 *
21 *Revision 2.5 1998/08/03 16:57:01 ivan
22 *added cyclades_idle_stats structure;
23 *
24 *Revision 2.4 1998/06/01 12:09:53 ivan
25 *removed closing_wait2 from cyclades_port structure;
26 *
27 *Revision 2.3 1998/03/16 18:01:12 ivan
28 *changes in the cyclades_port structure to get it closer to the
29 *standard serial port structure;
30 *added constants for new ioctls;
31 *
32 *Revision 2.2 1998/02/17 16:50:00 ivan
33 *changes in the cyclades_port structure (addition of shutdown_wait and
34 *chip_rev variables);
35 *added constants for new ioctls and for CD1400 rev. numbers.
36 *
37 *Revision 2.1 1997/10/24 16:03:00 ivan
38 *added rflow (which allows enabling the CD1400 special flow control
39 *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
40 *cyclades_port structure;
41 *added Alpha support
42 *
43 *Revision 2.0 1997/06/30 10:30:00 ivan
44 *added some new doorbell command constants related to IOCTLW and
45 *UART error signaling
46 *
47 *Revision 1.8 1997/06/03 15:30:00 ivan
48 *added constant ZFIRM_HLT
49 *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
50 *
51 *Revision 1.7 1997/03/26 10:30:00 daniel
52 *new entries at the end of cyclades_port struct to reallocate
53 *variables illegally allocated within card memory.
54 *
55 *Revision 1.6 1996/09/09 18:35:30 bentson
56 *fold in changes for Cyclom-Z -- including structures for
57 *communicating with board as well modest changes to original
58 *structures to support new features.
59 *
60 *Revision 1.5 1995/11/13 21:13:31 bentson
61 *changes suggested by Michael Chastain <mec@duracef.shout.net>
62 *to support use of this file in non-kernel applications
63 *
64 *
65 */
66
67#ifndef _LINUX_CYCLADES_H
68#define _LINUX_CYCLADES_H
69
70struct cyclades_monitor {
71 unsigned long int_count;
72 unsigned long char_count;
73 unsigned long char_max;
74 unsigned long char_last;
75};
76
77/*
78 * These stats all reflect activity since the device was last initialized.
79 * (i.e., since the port was opened with no other processes already having it
80 * open)
81 */
82struct cyclades_idle_stats {
83 time_t in_use; /* Time device has been in use (secs) */
84 time_t recv_idle; /* Time since last char received (secs) */
85 time_t xmit_idle; /* Time since last char transmitted (secs) */
86 unsigned long recv_bytes; /* Bytes received */
87 unsigned long xmit_bytes; /* Bytes transmitted */
88 unsigned long overruns; /* Input overruns */
89 unsigned long frame_errs; /* Input framing errors */
90 unsigned long parity_errs; /* Input parity errors */
91};
92
93#define CYCLADES_MAGIC 0x4359
94
95#define CYGETMON 0x435901
96#define CYGETTHRESH 0x435902
97#define CYSETTHRESH 0x435903
98#define CYGETDEFTHRESH 0x435904
99#define CYSETDEFTHRESH 0x435905
100#define CYGETTIMEOUT 0x435906
101#define CYSETTIMEOUT 0x435907
102#define CYGETDEFTIMEOUT 0x435908
103#define CYSETDEFTIMEOUT 0x435909
104#define CYSETRFLOW 0x43590a
105#define CYGETRFLOW 0x43590b
106#define CYSETRTSDTR_INV 0x43590c
107#define CYGETRTSDTR_INV 0x43590d
108#define CYZSETPOLLCYCLE 0x43590e
109#define CYZGETPOLLCYCLE 0x43590f
110#define CYGETCD1400VER 0x435910
111#define CYGETCARDINFO 0x435911
112#define CYSETWAIT 0x435912
113#define CYGETWAIT 0x435913
114
115/*************** CYCLOM-Z ADDITIONS ***************/
116
117#define CZIOC ('M' << 8)
118#define CZ_NBOARDS (CZIOC|0xfa)
119#define CZ_BOOT_START (CZIOC|0xfb)
120#define CZ_BOOT_DATA (CZIOC|0xfc)
121#define CZ_BOOT_END (CZIOC|0xfd)
122#define CZ_TEST (CZIOC|0xfe)
123
124#define CZ_DEF_POLL (HZ/25)
125
126#define MAX_BOARD 4 /* Max number of boards */
127#define MAX_DEV 256 /* Max number of ports total */
128#define CYZ_MAX_SPEED 921600
129
130#define CYZ_FIFO_SIZE 16
131
132#define CYZ_BOOT_NWORDS 0x100
133struct CYZ_BOOT_CTRL {
134 unsigned short nboard;
135 int status[MAX_BOARD];
136 int nchannel[MAX_BOARD];
137 int fw_rev[MAX_BOARD];
138 unsigned long offset;
139 unsigned long data[CYZ_BOOT_NWORDS];
140};
141
142
143#ifndef DP_WINDOW_SIZE
144/* #include "cyclomz.h" */
145/****************** ****************** *******************/
146/*
147 * The data types defined below are used in all ZFIRM interface
148 * data structures. They accomodate differences between HW
149 * architectures and compilers.
150 */
151
152#if defined(__alpha__)
153typedef unsigned long ucdouble; /* 64 bits, unsigned */
154typedef unsigned int uclong; /* 32 bits, unsigned */
155#else
156typedef unsigned long uclong; /* 32 bits, unsigned */
157#endif
158typedef unsigned short ucshort; /* 16 bits, unsigned */
159typedef unsigned char ucchar; /* 8 bits, unsigned */
160
161/*
162 * Memory Window Sizes
163 */
164
165#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
166#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
167 8Zo V.2 */
168#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
169
170/*
171 * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
172 * normally will access only interested on the fpga_id, fpga_version,
173 * start_cpu and stop_cpu.
174 */
175
176struct CUSTOM_REG {
177 uclong fpga_id; /* FPGA Identification Register */
178 uclong fpga_version; /* FPGA Version Number Register */
179 uclong cpu_start; /* CPU start Register (write) */
180 uclong cpu_stop; /* CPU stop Register (write) */
181 uclong misc_reg; /* Miscelaneous Register */
182 uclong idt_mode; /* IDT mode Register */
183 uclong uart_irq_status; /* UART IRQ status Register */
184 uclong clear_timer0_irq; /* Clear timer interrupt Register */
185 uclong clear_timer1_irq; /* Clear timer interrupt Register */
186 uclong clear_timer2_irq; /* Clear timer interrupt Register */
187 uclong test_register; /* Test Register */
188 uclong test_count; /* Test Count Register */
189 uclong timer_select; /* Timer select register */
190 uclong pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
191 uclong ram_wait_state; /* RAM wait-state Register */
192 uclong uart_wait_state; /* UART wait-state Register */
193 uclong timer_wait_state; /* timer wait-state Register */
194 uclong ack_wait_state; /* ACK wait State Register */
195};
196
197/*
198 * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
199 * registers. This structure can be used to access the 9060 registers
200 * (memory mapped).
201 */
202
203struct RUNTIME_9060 {
204 uclong loc_addr_range; /* 00h - Local Address Range */
205 uclong loc_addr_base; /* 04h - Local Address Base */
206 uclong loc_arbitr; /* 08h - Local Arbitration */
207 uclong endian_descr; /* 0Ch - Big/Little Endian Descriptor */
208 uclong loc_rom_range; /* 10h - Local ROM Range */
209 uclong loc_rom_base; /* 14h - Local ROM Base */
210 uclong loc_bus_descr; /* 18h - Local Bus descriptor */
211 uclong loc_range_mst; /* 1Ch - Local Range for Master to PCI */
212 uclong loc_base_mst; /* 20h - Local Base for Master PCI */
213 uclong loc_range_io; /* 24h - Local Range for Master IO */
214 uclong pci_base_mst; /* 28h - PCI Base for Master PCI */
215 uclong pci_conf_io; /* 2Ch - PCI configuration for Master IO */
216 uclong filler1; /* 30h */
217 uclong filler2; /* 34h */
218 uclong filler3; /* 38h */
219 uclong filler4; /* 3Ch */
220 uclong mail_box_0; /* 40h - Mail Box 0 */
221 uclong mail_box_1; /* 44h - Mail Box 1 */
222 uclong mail_box_2; /* 48h - Mail Box 2 */
223 uclong mail_box_3; /* 4Ch - Mail Box 3 */
224 uclong filler5; /* 50h */
225 uclong filler6; /* 54h */
226 uclong filler7; /* 58h */
227 uclong filler8; /* 5Ch */
228 uclong pci_doorbell; /* 60h - PCI to Local Doorbell */
229 uclong loc_doorbell; /* 64h - Local to PCI Doorbell */
230 uclong intr_ctrl_stat; /* 68h - Interrupt Control/Status */
231 uclong init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
232};
233
234/* Values for the Local Base Address re-map register */
235
236#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
237#define WIN_CREG 0x14000001L /* set the window to custom Registers */
238
239/* Values timer select registers */
240
241#define TIMER_BY_1M 0x00 /* clock divided by 1M */
242#define TIMER_BY_256K 0x01 /* clock divided by 256k */
243#define TIMER_BY_128K 0x02 /* clock divided by 128k */
244#define TIMER_BY_32K 0x03 /* clock divided by 32k */
245
246/****************** ****************** *******************/
247#endif
248
249#ifndef ZFIRM_ID
250/* #include "zfwint.h" */
251/****************** ****************** *******************/
252/*
253 * This file contains the definitions for interfacing with the
254 * Cyclom-Z ZFIRM Firmware.
255 */
256
257/* General Constant definitions */
258
259#define MAX_CHAN 64 /* max number of channels per board */
260
261/* firmware id structure (set after boot) */
262
263#define ID_ADDRESS 0x00000180L /* signature/pointer address */
264#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
265#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
266#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
267
268#define ZF_TINACT_DEF 1000 /* default inactivity timeout
269 (1000 ms) */
270#define ZF_TINACT ZF_TINACT_DEF
271
272struct FIRM_ID {
273 uclong signature; /* ZFIRM/U signature */
274 uclong zfwctrl_addr; /* pointer to ZFW_CTRL structure */
275};
276
277/* Op. System id */
278
279#define C_OS_LINUX 0x00000030 /* generic Linux system */
280
281/* channel op_mode */
282
283#define C_CH_DISABLE 0x00000000 /* channel is disabled */
284#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
285#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
286#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
287#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
288
289/* comm_parity - parity */
290
291#define C_PR_NONE 0x00000000 /* None */
292#define C_PR_ODD 0x00000001 /* Odd */
293#define C_PR_EVEN 0x00000002 /* Even */
294#define C_PR_MARK 0x00000004 /* Mark */
295#define C_PR_SPACE 0x00000008 /* Space */
296#define C_PR_PARITY 0x000000ff
297
298#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
299#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
300
301/* comm_data_l - data length and stop bits */
302
303#define C_DL_CS5 0x00000001
304#define C_DL_CS6 0x00000002
305#define C_DL_CS7 0x00000004
306#define C_DL_CS8 0x00000008
307#define C_DL_CS 0x0000000f
308#define C_DL_1STOP 0x00000010
309#define C_DL_15STOP 0x00000020
310#define C_DL_2STOP 0x00000040
311#define C_DL_STOP 0x000000f0
312
313/* interrupt enabling/status */
314
315#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
316#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
317#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
318#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
319#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
320#define C_IN_MDCD 0x00000100 /* modem DCD change */
321#define C_IN_MDSR 0x00000200 /* modem DSR change */
322#define C_IN_MRI 0x00000400 /* modem RI change */
323#define C_IN_MCTS 0x00000800 /* modem CTS change */
324#define C_IN_RXBRK 0x00001000 /* Break received */
325#define C_IN_PR_ERROR 0x00002000 /* parity error */
326#define C_IN_FR_ERROR 0x00004000 /* frame error */
327#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
328#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
329#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
330#define C_IN_MRTS 0x00040000 /* modem RTS drop */
331#define C_IN_ICHAR 0x00080000
332
333/* flow control */
334
335#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
336#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
337#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
338#define C_FL_SWFLOW 0x0000000f
339
340/* flow status */
341
342#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
343#define C_FS_SENDING 0x00000001 /* UART is sending data */
344#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
345
346/* rs_control/rs_status RS-232 signals */
347
348#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
349 IOCTLM command */
350#define C_RS_RTS 0x00000001 /* RTS */
351#define C_RS_DTR 0x00000004 /* DTR */
352#define C_RS_DCD 0x00000100 /* CD */
353#define C_RS_DSR 0x00000200 /* DSR */
354#define C_RS_RI 0x00000400 /* RI */
355#define C_RS_CTS 0x00000800 /* CTS */
356
357/* commands Host <-> Board */
358
359#define C_CM_RESET 0x01 /* reset/flush buffers */
360#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
361#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
362#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
363#define C_CM_SENDXOFF 0x10 /* send Xoff */
364#define C_CM_SENDXON 0x11 /* send Xon */
365#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
366#define C_CM_SENDBRK 0x41 /* send break */
367#define C_CM_INTBACK 0x42 /* Interrupt back */
368#define C_CM_SET_BREAK 0x43 /* Tx break on */
369#define C_CM_CLR_BREAK 0x44 /* Tx break off */
370#define C_CM_CMD_DONE 0x45 /* Previous command done */
371#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
372#define C_CM_TINACT 0x51 /* set inactivity detection */
373#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
374#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
375#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
376#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
377#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
378#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
379#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
380 driver */
381#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
382 driver */
383
384#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
385#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
386#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
387#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
388#define C_CM_TXFEMPTY 0x64
389#define C_CM_ICHAR 0x65
390#define C_CM_MDCD 0x70 /* modem DCD change */
391#define C_CM_MDSR 0x71 /* modem DSR change */
392#define C_CM_MRI 0x72 /* modem RI change */
393#define C_CM_MCTS 0x73 /* modem CTS change */
394#define C_CM_MRTS 0x74 /* modem RTS drop */
395#define C_CM_RXBRK 0x84 /* Break received */
396#define C_CM_PR_ERROR 0x85 /* Parity error */
397#define C_CM_FR_ERROR 0x86 /* Frame error */
398#define C_CM_OVR_ERROR 0x87 /* Overrun error */
399#define C_CM_RXOFL 0x88 /* RX buffer overflow */
400#define C_CM_CMDERROR 0x90 /* command error */
401#define C_CM_FATAL 0x91 /* fatal error */
402#define C_CM_HW_RESET 0x92 /* reset board */
403
404/*
405 * CH_CTRL - This per port structure contains all parameters
406 * that control an specific port. It can be seen as the
407 * configuration registers of a "super-serial-controller".
408 */
409
410struct CH_CTRL {
411 uclong op_mode; /* operation mode */
412 uclong intr_enable; /* interrupt masking */
413 uclong sw_flow; /* SW flow control */
414 uclong flow_status; /* output flow status */
415 uclong comm_baud; /* baud rate - numerically specified */
416 uclong comm_parity; /* parity */
417 uclong comm_data_l; /* data length/stop */
418 uclong comm_flags; /* other flags */
419 uclong hw_flow; /* HW flow control */
420 uclong rs_control; /* RS-232 outputs */
421 uclong rs_status; /* RS-232 inputs */
422 uclong flow_xon; /* xon char */
423 uclong flow_xoff; /* xoff char */
424 uclong hw_overflow; /* hw overflow counter */
425 uclong sw_overflow; /* sw overflow counter */
426 uclong comm_error; /* frame/parity error counter */
427 uclong ichar;
428 uclong filler[7];
429};
430
431
432/*
433 * BUF_CTRL - This per channel structure contains
434 * all Tx and Rx buffer control for a given channel.
435 */
436
437struct BUF_CTRL {
438 uclong flag_dma; /* buffers are in Host memory */
439 uclong tx_bufaddr; /* address of the tx buffer */
440 uclong tx_bufsize; /* tx buffer size */
441 uclong tx_threshold; /* tx low water mark */
442 uclong tx_get; /* tail index tx buf */
443 uclong tx_put; /* head index tx buf */
444 uclong rx_bufaddr; /* address of the rx buffer */
445 uclong rx_bufsize; /* rx buffer size */
446 uclong rx_threshold; /* rx high water mark */
447 uclong rx_get; /* tail index rx buf */
448 uclong rx_put; /* head index rx buf */
449 uclong filler[5]; /* filler to align structures */
450};
451
452/*
453 * BOARD_CTRL - This per board structure contains all global
454 * control fields related to the board.
455 */
456
457struct BOARD_CTRL {
458
459 /* static info provided by the on-board CPU */
460 uclong n_channel; /* number of channels */
461 uclong fw_version; /* firmware version */
462
463 /* static info provided by the driver */
464 uclong op_system; /* op_system id */
465 uclong dr_version; /* driver version */
466
467 /* board control area */
468 uclong inactivity; /* inactivity control */
469
470 /* host to FW commands */
471 uclong hcmd_channel; /* channel number */
472 uclong hcmd_param; /* pointer to parameters */
473
474 /* FW to Host commands */
475 uclong fwcmd_channel; /* channel number */
476 uclong fwcmd_param; /* pointer to parameters */
477 uclong zf_int_queue_addr; /* offset for INT_QUEUE structure */
478
479 /* filler so the structures are aligned */
480 uclong filler[6];
481};
482
483/* Host Interrupt Queue */
484
485#define QUEUE_SIZE (10*MAX_CHAN)
486
487struct INT_QUEUE {
488 unsigned char intr_code[QUEUE_SIZE];
489 unsigned long channel[QUEUE_SIZE];
490 unsigned long param[QUEUE_SIZE];
491 unsigned long put;
492 unsigned long get;
493};
494
495/*
496 * ZFW_CTRL - This is the data structure that includes all other
497 * data structures used by the Firmware.
498 */
499
500struct ZFW_CTRL {
501 struct BOARD_CTRL board_ctrl;
502 struct CH_CTRL ch_ctrl[MAX_CHAN];
503 struct BUF_CTRL buf_ctrl[MAX_CHAN];
504};
505
506/****************** ****************** *******************/
507#endif
508
509/* Per card data structure */
510struct resource;
511struct cyclades_card {
512 unsigned long base_phys;
513 unsigned long ctl_phys;
514 void __iomem *base_addr;
515 void __iomem *ctl_addr;
516 int irq;
517 int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
518 int first_line; /* minor number of first channel on card */
519 int nports; /* Number of ports in the card */
520 int bus_index; /* address shift - 0 for ISA, 1 for PCI */
521 int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */
522 struct pci_dev *pdev;
523#ifdef __KERNEL__
524 spinlock_t card_lock;
525#else
526 unsigned long filler;
527#endif
528};
529
530struct cyclades_chip {
531 int filler;
532};
533
534
535#ifdef __KERNEL__
536
537/***************************************
538 * Memory access functions/macros *
539 * (required to support Alpha systems) *
540 ***************************************/
541
542#define cy_writeb(port,val) {writeb((val),(port)); mb();}
543#define cy_writew(port,val) {writew((val),(port)); mb();}
544#define cy_writel(port,val) {writel((val),(port)); mb();}
545
546#define cy_readb(port) readb(port)
547#define cy_readw(port) readw(port)
548#define cy_readl(port) readl(port)
549
550/*
551 * Statistics counters
552 */
553struct cyclades_icount {
554 __u32 cts, dsr, rng, dcd, tx, rx;
555 __u32 frame, parity, overrun, brk;
556 __u32 buf_overrun;
557};
558
559/*
560 * This is our internal structure for each serial port's state.
561 *
562 * Many fields are paralleled by the structure used by the serial_struct
563 * structure.
564 *
565 * For definitions of the flags field, see tty.h
566 */
567
568struct cyclades_port {
569 int magic;
570 int card;
571 int line;
572 int flags; /* defined in tty.h */
573 int type; /* UART type */
574 struct tty_struct *tty;
575 int read_status_mask;
576 int ignore_status_mask;
577 int timeout;
578 int xmit_fifo_size;
579 int cor1,cor2,cor3,cor4,cor5;
580 int tbpr,tco,rbpr,rco;
581 int baud;
582 int rflow;
583 int rtsdtr_inv;
584 int chip_rev;
585 int custom_divisor;
586 int x_char; /* to be pushed out ASAP */
587 int close_delay;
588 unsigned short closing_wait;
589 unsigned long event;
590 unsigned long last_active;
591 int count; /* # of fd on device */
592 int breakon;
593 int breakoff;
594 int blocked_open; /* # of blocked opens */
595 unsigned char *xmit_buf;
596 int xmit_head;
597 int xmit_tail;
598 int xmit_cnt;
599 int default_threshold;
600 int default_timeout;
601 unsigned long jiffies[3];
602 unsigned long rflush_count;
603 struct cyclades_monitor mon;
604 struct cyclades_idle_stats idle_stats;
605 struct cyclades_icount icount;
606 struct work_struct tqueue;
607 wait_queue_head_t open_wait;
608 wait_queue_head_t close_wait;
609 wait_queue_head_t shutdown_wait;
610 wait_queue_head_t delta_msr_wait;
611 int throttle;
612};
613
614/*
615 * Events are used to schedule things to happen at timer-interrupt
616 * time, instead of at cy interrupt time.
617 */
618#define Cy_EVENT_READ_PROCESS 0
619#define Cy_EVENT_WRITE_WAKEUP 1
620#define Cy_EVENT_HANGUP 2
621#define Cy_EVENT_BREAK 3
622#define Cy_EVENT_OPEN_WAKEUP 4
623#define Cy_EVENT_SHUTDOWN_WAKEUP 5
624#define Cy_EVENT_DELTA_WAKEUP 6
625#define Cy_EVENT_Z_RX_FULL 7
626
627#define CLOSING_WAIT_DELAY 30*HZ
628#define CY_CLOSING_WAIT_NONE 65535
629#define CY_CLOSING_WAIT_INF 0
630
631
632#define CyMAX_CHIPS_PER_CARD 8
633#define CyMAX_CHAR_FIFO 12
634#define CyPORTS_PER_CHIP 4
635#define CD1400_MAX_SPEED 115200
636
637#define CyISA_Ywin 0x2000
638
639#define CyPCI_Ywin 0x4000
640#define CyPCI_Yctl 0x80
641#define CyPCI_Zctl CTRL_WINDOW_SIZE
642#define CyPCI_Zwin 0x80000
643#define CyPCI_Ze_win (2 * CyPCI_Zwin)
644
645#define PCI_DEVICE_ID_MASK 0x06
646
647/**** CD1400 registers ****/
648
649#define CD1400_REV_G 0x46
650#define CD1400_REV_J 0x48
651
652#define CyRegSize 0x0400
653#define Cy_HwReset 0x1400
654#define Cy_ClrIntr 0x1800
655#define Cy_EpldRev 0x1e00
656
657/* Global Registers */
658
659#define CyGFRCR (0x40*2)
660#define CyRevE (44)
661#define CyCAR (0x68*2)
662#define CyCHAN_0 (0x00)
663#define CyCHAN_1 (0x01)
664#define CyCHAN_2 (0x02)
665#define CyCHAN_3 (0x03)
666#define CyGCR (0x4B*2)
667#define CyCH0_SERIAL (0x00)
668#define CyCH0_PARALLEL (0x80)
669#define CySVRR (0x67*2)
670#define CySRModem (0x04)
671#define CySRTransmit (0x02)
672#define CySRReceive (0x01)
673#define CyRICR (0x44*2)
674#define CyTICR (0x45*2)
675#define CyMICR (0x46*2)
676#define CyICR0 (0x00)
677#define CyICR1 (0x01)
678#define CyICR2 (0x02)
679#define CyICR3 (0x03)
680#define CyRIR (0x6B*2)
681#define CyTIR (0x6A*2)
682#define CyMIR (0x69*2)
683#define CyIRDirEq (0x80)
684#define CyIRBusy (0x40)
685#define CyIRUnfair (0x20)
686#define CyIRContext (0x1C)
687#define CyIRChannel (0x03)
688#define CyPPR (0x7E*2)
689#define CyCLOCK_20_1MS (0x27)
690#define CyCLOCK_25_1MS (0x31)
691#define CyCLOCK_25_5MS (0xf4)
692#define CyCLOCK_60_1MS (0x75)
693#define CyCLOCK_60_2MS (0xea)
694
695/* Virtual Registers */
696
697#define CyRIVR (0x43*2)
698#define CyTIVR (0x42*2)
699#define CyMIVR (0x41*2)
700#define CyIVRMask (0x07)
701#define CyIVRRxEx (0x07)
702#define CyIVRRxOK (0x03)
703#define CyIVRTxOK (0x02)
704#define CyIVRMdmOK (0x01)
705#define CyTDR (0x63*2)
706#define CyRDSR (0x62*2)
707#define CyTIMEOUT (0x80)
708#define CySPECHAR (0x70)
709#define CyBREAK (0x08)
710#define CyPARITY (0x04)
711#define CyFRAME (0x02)
712#define CyOVERRUN (0x01)
713#define CyMISR (0x4C*2)
714/* see CyMCOR_ and CyMSVR_ for bits*/
715#define CyEOSRR (0x60*2)
716
717/* Channel Registers */
718
719#define CyLIVR (0x18*2)
720#define CyMscsr (0x01)
721#define CyTdsr (0x02)
722#define CyRgdsr (0x03)
723#define CyRedsr (0x07)
724#define CyCCR (0x05*2)
725/* Format 1 */
726#define CyCHAN_RESET (0x80)
727#define CyCHIP_RESET (0x81)
728#define CyFlushTransFIFO (0x82)
729/* Format 2 */
730#define CyCOR_CHANGE (0x40)
731#define CyCOR1ch (0x02)
732#define CyCOR2ch (0x04)
733#define CyCOR3ch (0x08)
734/* Format 3 */
735#define CySEND_SPEC_1 (0x21)
736#define CySEND_SPEC_2 (0x22)
737#define CySEND_SPEC_3 (0x23)
738#define CySEND_SPEC_4 (0x24)
739/* Format 4 */
740#define CyCHAN_CTL (0x10)
741#define CyDIS_RCVR (0x01)
742#define CyENB_RCVR (0x02)
743#define CyDIS_XMTR (0x04)
744#define CyENB_XMTR (0x08)
745#define CySRER (0x06*2)
746#define CyMdmCh (0x80)
747#define CyRxData (0x10)
748#define CyTxRdy (0x04)
749#define CyTxMpty (0x02)
750#define CyNNDT (0x01)
751#define CyCOR1 (0x08*2)
752#define CyPARITY_NONE (0x00)
753#define CyPARITY_0 (0x20)
754#define CyPARITY_1 (0xA0)
755#define CyPARITY_E (0x40)
756#define CyPARITY_O (0xC0)
757#define Cy_1_STOP (0x00)
758#define Cy_1_5_STOP (0x04)
759#define Cy_2_STOP (0x08)
760#define Cy_5_BITS (0x00)
761#define Cy_6_BITS (0x01)
762#define Cy_7_BITS (0x02)
763#define Cy_8_BITS (0x03)
764#define CyCOR2 (0x09*2)
765#define CyIXM (0x80)
766#define CyTxIBE (0x40)
767#define CyETC (0x20)
768#define CyAUTO_TXFL (0x60)
769#define CyLLM (0x10)
770#define CyRLM (0x08)
771#define CyRtsAO (0x04)
772#define CyCtsAE (0x02)
773#define CyDsrAE (0x01)
774#define CyCOR3 (0x0A*2)
775#define CySPL_CH_DRANGE (0x80) /* special character detect range */
776#define CySPL_CH_DET1 (0x40) /* enable special character detection
777 on SCHR4-SCHR3 */
778#define CyFL_CTRL_TRNSP (0x20) /* Flow Control Transparency */
779#define CySPL_CH_DET2 (0x10) /* Enable special character detection
780 on SCHR2-SCHR1 */
781#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */
782#define CyCOR4 (0x1E*2)
783#define CyCOR5 (0x1F*2)
784#define CyCCSR (0x0B*2)
785#define CyRxEN (0x80)
786#define CyRxFloff (0x40)
787#define CyRxFlon (0x20)
788#define CyTxEN (0x08)
789#define CyTxFloff (0x04)
790#define CyTxFlon (0x02)
791#define CyRDCR (0x0E*2)
792#define CySCHR1 (0x1A*2)
793#define CySCHR2 (0x1B*2)
794#define CySCHR3 (0x1C*2)
795#define CySCHR4 (0x1D*2)
796#define CySCRL (0x22*2)
797#define CySCRH (0x23*2)
798#define CyLNC (0x24*2)
799#define CyMCOR1 (0x15*2)
800#define CyMCOR2 (0x16*2)
801#define CyRTPR (0x21*2)
802#define CyMSVR1 (0x6C*2)
803#define CyMSVR2 (0x6D*2)
804#define CyANY_DELTA (0xF0)
805#define CyDSR (0x80)
806#define CyCTS (0x40)
807#define CyRI (0x20)
808#define CyDCD (0x10)
809#define CyDTR (0x02)
810#define CyRTS (0x01)
811#define CyPVSR (0x6F*2)
812#define CyRBPR (0x78*2)
813#define CyRCOR (0x7C*2)
814#define CyTBPR (0x72*2)
815#define CyTCOR (0x76*2)
816
817/* Custom Registers */
818
819#define CyPLX_VER (0x3400)
820#define PLX_9050 0x0b
821#define PLX_9060 0x0c
822#define PLX_9080 0x0d
823
824/***************************************************************************/
825
826#endif /* __KERNEL__ */
827#endif /* _LINUX_CYCLADES_H */