aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/atmel_pwm.h
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2008-02-08 07:21:21 -0500
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2008-02-08 12:22:38 -0500
commit9a1e8eb1f0b76b5e72a2343ad881c81b08dd6410 (patch)
treef844d0e1316b49fd66cf773009ba2c3d46fcd18f /include/linux/atmel_pwm.h
parentc8cece84c9f36410de5164735e909603426e4d5f (diff)
Basic PWM driver for AVR32 and AT91
PWM device setup, and a simple PWM driver exposing a programming interface giving access to each channel's full capabilities. Note that this doesn't support starting several channels in synch. [hskinnemoen@atmel.com: allocate platform device dynamically] [hskinnemoen@atmel.com: Kconfig fix] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'include/linux/atmel_pwm.h')
-rw-r--r--include/linux/atmel_pwm.h70
1 files changed, 70 insertions, 0 deletions
diff --git a/include/linux/atmel_pwm.h b/include/linux/atmel_pwm.h
new file mode 100644
index 000000000000..ea04abb3db8e
--- /dev/null
+++ b/include/linux/atmel_pwm.h
@@ -0,0 +1,70 @@
1#ifndef __LINUX_ATMEL_PWM_H
2#define __LINUX_ATMEL_PWM_H
3
4/**
5 * struct pwm_channel - driver handle to a PWM channel
6 * @regs: base of this channel's registers
7 * @index: number of this channel (0..31)
8 * @mck: base clock rate, which can be prescaled and maybe subdivided
9 *
10 * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
11 * Then they configure its clock rate (derived from MCK), alignment,
12 * polarity, and duty cycle by writing directly to the channel registers,
13 * before enabling the channel by calling pwm_channel_enable().
14 *
15 * After emitting a PWM signal for the desired length of time, drivers
16 * may then pwm_channel_disable() or pwm_channel_free(). Both of these
17 * disable the channel, but when it's freed the IRQ is deconfigured and
18 * the channel must later be re-allocated and reconfigured.
19 *
20 * Note that if the period or duty cycle need to be changed while the
21 * PWM channel is operating, drivers must use the PWM_CUPD double buffer
22 * mechanism, either polling until they change or getting implicitly
23 * notified through a once-per-period interrupt handler.
24 */
25struct pwm_channel {
26 void __iomem *regs;
27 unsigned index;
28 unsigned long mck;
29};
30
31extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
32extern int pwm_channel_free(struct pwm_channel *ch);
33
34extern int pwm_clk_alloc(unsigned prescale, unsigned div);
35extern void pwm_clk_free(unsigned clk);
36
37extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
38
39#define pwm_channel_enable(ch) __pwm_channel_onoff((ch), 1)
40#define pwm_channel_disable(ch) __pwm_channel_onoff((ch), 0)
41
42/* periodic interrupts, mostly for CUPD changes to period or cycle */
43extern int pwm_channel_handler(struct pwm_channel *ch,
44 void (*handler)(struct pwm_channel *ch));
45
46/* per-channel registers (banked at pwm_channel->regs) */
47#define PWM_CMR 0x00 /* mode register */
48#define PWM_CPR_CPD (1 << 10) /* set: CUPD modifies period */
49#define PWM_CPR_CPOL (1 << 9) /* set: idle high */
50#define PWM_CPR_CALG (1 << 8) /* set: center align */
51#define PWM_CPR_CPRE (0xf << 0) /* mask: rate is mck/(2^pre) */
52#define PWM_CPR_CLKA (0xb << 0) /* rate CLKA */
53#define PWM_CPR_CLKB (0xc << 0) /* rate CLKB */
54#define PWM_CDTY 0x04 /* duty cycle (max of CPRD) */
55#define PWM_CPRD 0x08 /* period (count up from zero) */
56#define PWM_CCNT 0x0c /* counter (20 bits?) */
57#define PWM_CUPD 0x10 /* update CPRD (or CDTY) next period */
58
59static inline void
60pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
61{
62 __raw_writel(val, pwmc->regs + offset);
63}
64
65static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
66{
67 return __raw_readl(pwmc->regs + offset);
68}
69
70#endif /* __LINUX_ATMEL_PWM_H */