x86_64: convert to clock events

Finally switch to the clockevents code. Share code with i386 for
hpet and PIT.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>

1 files changed, 88 insertions, 4 deletions

diff --git a/include/asm-x86/hpet.h b/include/asm-x86/hpet.h
index 9eff48601254..e2976ed30b70 100644
--- a/include/asm-x86/hpet.h
+++ b/include/asm-x86/hpet.h
@@ -1,5 +1,89 @@
-#ifdef CONFIG_X86_32
-# include "hpet_32.h"
+#ifndef ASM_X86_HPET_H
+#define ASM_X86_HPET_H
+
+#ifdef CONFIG_HPET_TIMER
+
+/*
+ * Documentation on HPET can be found at:
+ *      http://www.intel.com/ial/home/sp/pcmmspec.htm
+ *      ftp://download.intel.com/ial/home/sp/mmts098.pdf
+ */
+
+#define HPET_MMAP_SIZE          1024
+
+#define HPET_ID                 0x000
+#define HPET_PERIOD             0x004
+#define HPET_CFG                0x010
+#define HPET_STATUS             0x020
+#define HPET_COUNTER            0x0f0
+#define HPET_T0_CFG             0x100
+#define HPET_T0_CMP             0x108
+#define HPET_T0_ROUTE           0x110
+#define HPET_T1_CFG             0x120
+#define HPET_T1_CMP             0x128
+#define HPET_T1_ROUTE           0x130
+#define HPET_T2_CFG             0x140
+#define HPET_T2_CMP             0x148
+#define HPET_T2_ROUTE           0x150
+
+#define HPET_ID_REV             0x000000ff
+#define HPET_ID_NUMBER          0x00001f00
+#define HPET_ID_64BIT           0x00002000
+#define HPET_ID_LEGSUP          0x00008000
+#define HPET_ID_VENDOR          0xffff0000
+#define HPET_ID_NUMBER_SHIFT    8
+#define HPET_ID_VENDOR_SHIFT    16
+
+#define HPET_ID_VENDOR_8086     0x8086
+
+#define HPET_CFG_ENABLE         0x001
+#define HPET_CFG_LEGACY         0x002
+#define HPET_LEGACY_8254        2
+#define HPET_LEGACY_RTC         8
+
+#define HPET_TN_LEVEL           0x0002
+#define HPET_TN_ENABLE          0x0004
+#define HPET_TN_PERIODIC        0x0008
+#define HPET_TN_PERIODIC_CAP    0x0010
+#define HPET_TN_64BIT_CAP       0x0020
+#define HPET_TN_SETVAL          0x0040
+#define HPET_TN_32BIT           0x0100
+#define HPET_TN_ROUTE           0x3e00
+#define HPET_TN_FSB             0x4000
+#define HPET_TN_FSB_CAP         0x8000
+#define HPET_TN_ROUTE_SHIFT     9
+
+/* Max HPET Period is 10^8 femto sec as in HPET spec */
+#define HPET_MAX_PERIOD         100000000UL
+/*
+ * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
+ * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
+ */
+#define HPET_MIN_PERIOD         100000UL
+
+/* hpet memory map physical address */
+extern unsigned long hpet_address;
+extern int is_hpet_enabled(void);
+extern int hpet_enable(void);
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+
+#include <linux/interrupt.h>
+
+extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
+extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
+                               unsigned char sec);
+extern int hpet_set_periodic_freq(unsigned long freq);
+extern int hpet_rtc_dropped_irq(void);
+extern int hpet_rtc_timer_init(void);
+extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
+
+#endif /* CONFIG_HPET_EMULATE_RTC */
+
 #else
-# include "hpet_64.h"
-#endif
+
+static inline int hpet_enable(void) { return 0; }
+
+#endif /* CONFIG_HPET_TIMER */
+#endif /* ASM_X86_HPET_H */