Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 92 insertions, 0 deletions

diff --git a/include/asm-sh/snapgear/io.h b/include/asm-sh/snapgear/io.h
new file mode 100644
index 000000000000..bfa97ac06280
--- /dev/null
+++ b/include/asm-sh/snapgear/io.h
@@ -0,0 +1,92 @@
+/*
+ * include/asm-sh/snapgear/io.h
+ *
+ * Modified version of io_se.h for the snapgear-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for a SnapGear
+ */
+
+#ifndef _ASM_SH_IO_SNAPGEAR_H
+#define _ASM_SH_IO_SNAPGEAR_H
+
+#if defined(CONFIG_CPU_SH4)
+/*
+ * The external interrupt lines, these take up ints 0 - 15 inclusive
+ * depending on the priority for the interrupt.  In fact the priority
+ * is the interrupt :-)
+ */
+
+#define IRL0_IRQ                2
+#define IRL0_IPR_ADDR   INTC_IPRD
+#define IRL0_IPR_POS    3
+#define IRL0_PRIORITY   13
+
+#define IRL1_IRQ                5
+#define IRL1_IPR_ADDR   INTC_IPRD
+#define IRL1_IPR_POS    2
+#define IRL1_PRIORITY   10
+
+#define IRL2_IRQ                8
+#define IRL2_IPR_ADDR   INTC_IPRD
+#define IRL2_IPR_POS    1
+#define IRL2_PRIORITY   7
+
+#define IRL3_IRQ                11
+#define IRL3_IPR_ADDR   INTC_IPRD
+#define IRL3_IPR_POS    0
+#define IRL3_PRIORITY   4
+#endif
+
+extern unsigned char snapgear_inb(unsigned long port);
+extern unsigned short snapgear_inw(unsigned long port);
+extern unsigned int snapgear_inl(unsigned long port);
+
+extern void snapgear_outb(unsigned char value, unsigned long port);
+extern void snapgear_outw(unsigned short value, unsigned long port);
+extern void snapgear_outl(unsigned int value, unsigned long port);
+
+extern unsigned char snapgear_inb_p(unsigned long port);
+extern void snapgear_outb_p(unsigned char value, unsigned long port);
+
+extern void snapgear_insl(unsigned long port, void *addr, unsigned long count);
+extern void snapgear_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long snapgear_isa_port2addr(unsigned long offset);
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+/*
+ * We need to remember what was written to the ioport as some bits
+ * are shared with other functions and you cannot read back what was
+ * written :-|
+ *
+ * Bit        Read                   Write
+ * -----------------------------------------------
+ * D0         DCD on ttySC1          power
+ * D1         Reset Switch           heatbeat
+ * D2         ttySC0 CTS (7100)      LAN
+ * D3         -                      WAN
+ * D4         ttySC0 DCD (7100)      CONSOLE
+ * D5         -                      ONLINE
+ * D6         -                      VPN
+ * D7         -                      DTR on ttySC1
+ * D8         -                      ttySC0 RTS (7100)
+ * D9         -                      ttySC0 DTR (7100)
+ * D10        -                      RTC SCLK
+ * D11        RTC DATA               RTC DATA
+ * D12        -                      RTS RESET
+ */
+
+ #define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+ extern unsigned short secureedge5410_ioport;
+
+ #define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+                 (secureedge5410_ioport = \
+                                ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+ #define SECUREEDGE_READ_IOPORT() \
+                 ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+#endif
+
+#endif /* _ASM_SH_IO_SNAPGEAR_H */