Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (108 commits)
  sh: Fix occasional flush_cache_4096() stack corruption.
  sh: Calculate shm alignment at runtime.
  sh: dma-mapping compile fixes.
  sh: Initial vsyscall page support.
  sh: Clean up PAGE_SIZE definition for assembly use.
  sh: Selective flush_cache_mm() flushing.
  sh: More intelligent entry_mask/way_size calculation.
  sh: Support for L2 cache on newer SH-4A CPUs.
  sh: Update kexec support for API changes.
  sh: Optimized readsl()/writesl() support.
  sh: Report movli.l/movco.l capabilities.
  sh: CPU flags in AT_HWCAP in ELF auxvt.
  sh: Add support for 4K stacks.
  sh: Enable /proc/kcore support.
  sh: stack debugging support.
  sh: select CONFIG_EMBEDDED.
  sh: machvec rework.
  sh: Solution Engine SH7343 board support.
  sh: SH7710VoIPGW board support.
  sh: Enable verbose BUG() support.
  ...

1 files changed, 0 insertions, 88 deletions

diff --git a/include/asm-sh/overdrive/overdrive.h b/include/asm-sh/overdrive/overdrive.h
deleted file mode 100644
index fc746c244f83..000000000000
--- a/include/asm-sh/overdrive/overdrive.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* 
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- */
-
-
-#ifndef __OVERDRIVE_H__
-#define __OVERDRIVE_H__
-
-#define OVERDRIVE_INT_CT 0xa3a00000
-#define OVERDRIVE_INT_DT 0xa3b00000
-
-#define OVERDRIVE_CTRL    0xa3000000
-
-/* Shoving all these bits into the same register is not a good idea. 
- * As soon as I get a spare moment, I'll change the FPGA and put each 
- * bit in a separate register
- */
-
-#define VALID_CTRL_BITS                   0x1f
-
-#define ENABLE_RS232_MASK                 0x1e
-#define DISABLE_RS232_BIT                 0x01
-
-#define ENABLE_NMI_MASK                   0x1d
-#define DISABLE_NMI_BIT                   0x02
-
-#define RESET_PCI_MASK                    0x1b
-#define ENABLE_PCI_BIT                    0x04
-
-#define ENABLE_LED_MASK                   0x17
-#define DISABLE_LED_BIT                   0x08
-
-#define RESET_FPGA_MASK                   0x0f
-#define ENABLE_FPGA_BIT                   0x10
-
-
-#define FPGA_DCLK_ADDRESS           0xA3C00000
-
-#define FPGA_DATA        0x01   /*   W */
-#define FPGA_CONFDONE    0x02   /* R   */
-#define FPGA_NOT_STATUS  0x04   /* R   */
-#define FPGA_INITDONE    0x08   /* R   */
-
-#define FPGA_TIMEOUT     100000
-
-
-/* Interrupts for the overdrive. Note that these numbers have 
- * nothing to do with the actual IRQ numbers they appear on, 
- * this is all programmable. This is simply the position in the 
- * INT_CT register.
- */
-
-#define OVERDRIVE_PCI_INTA              0
-#define OVERDRIVE_PCI_INTB              1
-#define OVERDRIVE_PCI_INTC              2
-#define OVERDRIVE_PCI_INTD              3
-#define OVERDRIVE_GALILEO_INT           4
-#define OVERDRIVE_GALILEO_LOCAL_INT     5
-#define OVERDRIVE_AUDIO_INT             6
-#define OVERDRIVE_KEYBOARD_INT          7
-
-/* Which Linux IRQ should we assign to each interrupt source? */
-#define OVERDRIVE_PCI_IRQ1              2
-#ifdef CONFIG_HACKED_NE2K
-#define OVERDRIVE_PCI_IRQ2              7
-#else
-#define OVERDRIVE_PCI_IRQ2              2
-#undef OVERDRIVE_PCI_INTB 
-#define OVERDRIVE_PCI_INTB OVERDRIVE_PCI_INTA
-
-#endif
-
-/* Put the ESS solo audio chip on IRQ 4 */
-#define OVERDRIVE_ESS_IRQ               4
-
-/* Where the memory behind the PCI bus appears */
-#define PCI_DRAM_BASE   0xb7000000
-#define PCI_DRAM_SIZE (16*1024*1024)
-#define PCI_DRAM_FINISH (PCI_DRAM_BASE+PCI_DRAM_SIZE-1)
-
-/* Where the IO region appears in the memory */
-#define PCI_GTIO_BASE   0xb8000000
-
-#endif