Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

4 files changed, 98 insertions, 0 deletions

diff --git a/include/asm-sh/ec3104/ec3104.h b/include/asm-sh/ec3104/ec3104.h
new file mode 100644
index 000000000000..639cfa489c8f
--- /dev/null
+++ b/include/asm-sh/ec3104/ec3104.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_EC3104_H
+#define __ASM_EC3104_H
+
+
+/*
+ * Most of the register set is at 0xb0ec0000 - 0xb0ecffff.
+ *
+ * as far as I've figured it out the register map is:
+ * 0xb0ec0000 - id string
+ * 0xb0ec0XXX - power management
+ * 0xb0ec1XXX - interrupt control
+ * 0xb0ec3XXX - ps2 port (touch pad on aero 8000)
+ * 0xb0ec6XXX - i2c
+ * 0xb0ec7000 - first serial port (proprietary connector on aero 8000)
+ * 0xb0ec8000 - second serial port
+ * 0xb0ec9000 - third serial port
+ * 0xb0eca000 - fourth serial port (keyboard controller on aero 8000)
+ * 0xb0eccXXX - GPIO
+ * 0xb0ecdXXX - GPIO
+ */
+
+#define EC3104_BASE     0xb0ec0000
+
+#define EC3104_SER4_DATA        (EC3104_BASE+0xa000)
+#define EC3104_SER4_IIR         (EC3104_BASE+0xa008)
+#define EC3104_SER4_MCR         (EC3104_BASE+0xa010)
+#define EC3104_SER4_LSR         (EC3104_BASE+0xa014)
+#define EC3104_SER4_MSR         (EC3104_BASE+0xa018)
+
+/*
+ * our ISA bus.  this seems to be real ISA.
+ */
+#define EC3104_ISA_BASE 0xa5000000
+
+#define EC3104_IRQ      11
+#define EC3104_IRQBASE  64
+
+#define EC3104_IRQ_SER1 EC3104_IRQBASE + 7
+#define EC3104_IRQ_SER2 EC3104_IRQBASE + 8
+#define EC3104_IRQ_SER3 EC3104_IRQBASE + 9
+#define EC3104_IRQ_SER4 EC3104_IRQBASE + 10
+
+#endif /* __ASM_EC3104_H */
diff --git a/include/asm-sh/ec3104/io.h b/include/asm-sh/ec3104/io.h
new file mode 100644
index 000000000000..ea5c8e65ac11
--- /dev/null
+++ b/include/asm-sh/ec3104/io.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_SH_IO_EC3104_H
+#define _ASM_SH_IO_EC3104_H
+
+#include <linux/types.h>
+
+extern unsigned char ec3104_inb(unsigned long port);
+extern unsigned short ec3104_inw(unsigned long port);
+extern unsigned long ec3104_inl(unsigned long port);
+
+extern void ec3104_outb(unsigned char value, unsigned long port);
+extern void ec3104_outw(unsigned short value, unsigned long port);
+extern void ec3104_outl(unsigned long value, unsigned long port);
+
+extern int ec3104_irq_demux(int irq);
+
+#endif /* _ASM_SH_IO_EC3104_H */
diff --git a/include/asm-sh/ec3104/keyboard.h b/include/asm-sh/ec3104/keyboard.h
new file mode 100644
index 000000000000..0dee7b05b49d
--- /dev/null
+++ b/include/asm-sh/ec3104/keyboard.h
@@ -0,0 +1,17 @@
+extern unsigned char ec3104_kbd_sysrq_xlate[];
+extern int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode);
+extern int ec3104_kbd_getkeycode(unsigned int scancode);
+extern int ec3104_kbd_translate(unsigned char, unsigned char *, char);
+extern char ec3104_kbd_unexpected_up(unsigned char);
+extern void ec3104_kbd_leds(unsigned char);
+extern void ec3104_kbd_init_hw(void);
+
+#define SYSRQ_KEY 0x54
+
+#define kbd_sysrq_xlate ec3104_kbd_sysrq_xlate
+#define kbd_setkeycode ec3104_kbd_setkeycode
+#define kbd_getkeycode ec3104_kbd_getkeycode
+#define kbd_translate ec3104_kbd_translate
+#define kbd_unexpected_up ec3104_kbd_unexpected_up
+#define kbd_leds ec3104_kbd_leds
+#define kbd_init_hw ec3104_kbd_init_hw
diff --git a/include/asm-sh/ec3104/serial.h b/include/asm-sh/ec3104/serial.h
new file mode 100644
index 000000000000..f8eb16312ed9
--- /dev/null
+++ b/include/asm-sh/ec3104/serial.h
@@ -0,0 +1,22 @@
+#include <asm/ec3104.h>
+/* Naturally we don't know the exact value but 115200 baud has a divisor
+ * of 9 and 19200 baud has a divisor of 52, so this seems like a good
+ * guess.  */
+#define BASE_BAUD (16800000 / 16)
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+/* there is a fourth serial port with the expected values as well, but
+ * it's got the keyboard controller behind it so we can't really use it
+ * (without moving the keyboard driver to userspace, which doesn't sound
+ * like a very good idea) */
+#define STD_SERIAL_PORT_DEFNS                   \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x11C00, EC3104_IRQBASE+7, STD_COM_FLAGS }, /* ttyS0 */ \
+        { 0, BASE_BAUD, 0x12000, EC3104_IRQBASE+8, STD_COM_FLAGS }, /* ttyS1 */ \
+        { 0, BASE_BAUD, 0x12400, EC3104_IRQBASE+9, STD_COM_FLAGS }, /* ttyS2 */
+
+#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
+
+/* XXX: This should be moved ino irq.h */
+#define irq_cannonicalize(x) (x)