Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 229 insertions, 0 deletions

diff --git a/include/asm-ppc/uninorth.h b/include/asm-ppc/uninorth.h
new file mode 100644
index 000000000000..f737732c3861
--- /dev/null
+++ b/include/asm-ppc/uninorth.h
@@ -0,0 +1,229 @@
+/*
+ * uninorth.h: definitions for using the "UniNorth" host bridge chip
+ *             from Apple. This chip is used on "Core99" machines
+ *             This also includes U2 used on more recent MacRISC2/3
+ *             machines and U3 (G5) 
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_UNINORTH_H__
+#define __ASM_UNINORTH_H__
+
+/*
+ * Uni-N and U3 config space reg. definitions
+ *
+ * (Little endian)
+ */
+
+/* Address ranges selection. This one should work with Bandit too */
+/* Not U3 */
+#define UNI_N_ADDR_SELECT               0x48
+#define UNI_N_ADDR_COARSE_MASK          0xffff0000      /* 256Mb regions at *0000000 */
+#define UNI_N_ADDR_FINE_MASK            0x0000ffff      /*  16Mb regions at f*000000 */
+
+/* AGP registers */
+/* Not U3 */
+#define UNI_N_CFG_GART_BASE             0x8c
+#define UNI_N_CFG_AGP_BASE              0x90
+#define UNI_N_CFG_GART_CTRL             0x94
+#define UNI_N_CFG_INTERNAL_STATUS       0x98
+#define UNI_N_CFG_GART_DUMMY_PAGE       0xa4
+
+/* UNI_N_CFG_GART_CTRL bits definitions */
+#define UNI_N_CFG_GART_INVAL            0x00000001
+#define UNI_N_CFG_GART_ENABLE           0x00000100
+#define UNI_N_CFG_GART_2xRESET          0x00010000
+#define UNI_N_CFG_GART_DISSBADET        0x00020000
+/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
+#define U3_N_CFG_GART_SYNCMODE          0x00040000
+#define U3_N_CFG_GART_PERFRD            0x00080000
+#define U3_N_CFG_GART_B2BGNT            0x00200000
+#define U3_N_CFG_GART_FASTDDR           0x00400000
+
+/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
+ * revision 1.5 (x4 AGP) may need further changes.
+ *
+ * AGP_BASE register contains the base address of the AGP aperture on
+ * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
+ * even if decoding of this address range is enabled in the address select
+ * register. Apparently, the only supported bases are 256Mb multiples
+ * (high 4 bits of that register).
+ *
+ * GART_BASE register appear to contain the physical address of the GART
+ * in system memory in the high address bits (page aligned), and the
+ * GART size in the low order bits (number of GART pages)
+ *
+ * The GART format itself is one 32bits word per physical memory page.
+ * This word contains, in little-endian format (!!!), the physical address
+ * of the page in the high bits, and what appears to be an "enable" bit
+ * in the LSB bit (0) that must be set to 1 when the entry is valid.
+ *
+ * Obviously, the GART is not cache coherent and so any change to it
+ * must be flushed to memory (or maybe just make the GART space non
+ * cachable). AGP memory itself doens't seem to be cache coherent neither.
+ *
+ * In order to invalidate the GART (which is probably necessary to inval
+ * the bridge internal TLBs), the following sequence has to be written,
+ * in order, to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   UNI_N_CFG_GART_ENABLE
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
+ *   UNI_N_CFG_GART_ENABLE
+ *
+ * As far as AGP "features" are concerned, it looks like fast write may
+ * not be supported but this has to be confirmed.
+ *
+ * Turning on AGP seem to require a double invalidate operation, one before
+ * setting the AGP command register, on after.
+ *
+ * Turning off AGP seems to require the following sequence: first wait
+ * for the AGP to be idle by reading the internal status register, then
+ * write in that order to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   0
+ *   UNI_N_CFG_GART_2xRESET
+ *   0
+ */
+
+/*
+ * Uni-N memory mapped reg. definitions
+ *
+ * Those registers are Big-Endian !!
+ *
+ * Their meaning come from either Darwin and/or from experiments I made with
+ * the bootrom, I'm not sure about their exact meaning yet
+ *
+ */
+
+/* Version of the UniNorth chip */
+#define UNI_N_VERSION                   0x0000          /* Known versions: 3,7 and 8 */
+
+#define UNI_N_VERSION_107               0x0003          /* 1.0.7 */
+#define UNI_N_VERSION_10A               0x0007          /* 1.0.10 */
+#define UNI_N_VERSION_150               0x0011          /* 1.5 */
+#define UNI_N_VERSION_200               0x0024          /* 2.0 */
+#define UNI_N_VERSION_PANGEA            0x00C0          /* Integrated U1 + K */
+#define UNI_N_VERSION_INTREPID          0x00D2          /* Integrated U2 + K */
+#define UNI_N_VERSION_300               0x0030          /* 3.0 (U3 on G5) */
+
+/* This register is used to enable/disable various clocks */
+#define UNI_N_CLOCK_CNTL                0x0020
+#define UNI_N_CLOCK_CNTL_PCI            0x00000001      /* PCI2 clock control */
+#define UNI_N_CLOCK_CNTL_GMAC           0x00000002      /* GMAC clock control */
+#define UNI_N_CLOCK_CNTL_FW             0x00000004      /* FireWire clock control */
+#define UNI_N_CLOCK_CNTL_ATA100         0x00000010      /* ATA-100 clock control (U2) */
+
+/* Power Management control */
+#define UNI_N_POWER_MGT                 0x0030
+#define UNI_N_POWER_MGT_NORMAL          0x00
+#define UNI_N_POWER_MGT_IDLE2           0x01
+#define UNI_N_POWER_MGT_SLEEP           0x02
+
+/* This register is configured by Darwin depending on the UniN
+ * revision
+ */
+#define UNI_N_ARB_CTRL                  0x0040
+#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15
+#define UNI_N_ARB_CTRL_QACK_DELAY_MASK  0x0e1f8000
+#define UNI_N_ARB_CTRL_QACK_DELAY       0x30
+#define UNI_N_ARB_CTRL_QACK_DELAY105    0x00
+
+/* This one _might_ return the CPU number of the CPU reading it;
+ * the bootROM decides whether to boot or to sleep/spinloop depending
+ * on this register beeing 0 or not
+ */
+#define UNI_N_CPU_NUMBER                0x0050
+
+/* This register appear to be read by the bootROM to decide what
+ *  to do on a non-recoverable reset (powerup or wakeup)
+ */
+#define UNI_N_HWINIT_STATE              0x0070
+#define UNI_N_HWINIT_STATE_SLEEPING     0x01
+#define UNI_N_HWINIT_STATE_RUNNING      0x02
+/* This last bit appear to be used by the bootROM to know the second
+ * CPU has started and will enter it's sleep loop with IP=0
+ */
+#define UNI_N_HWINIT_STATE_CPU1_FLAG    0x10000000
+
+/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
+ * is in low speed mode.
+ */
+#define UNI_N_AACK_DELAY                0x0100
+#define UNI_N_AACK_DELAY_ENABLE         0x00000001
+
+/* Clock status for Intrepid */
+#define UNI_N_CLOCK_STOP_STATUS0        0x0150
+#define UNI_N_CLOCK_STOPPED_EXTAGP      0x00200000
+#define UNI_N_CLOCK_STOPPED_AGPDEL      0x00100000
+#define UNI_N_CLOCK_STOPPED_I2S0_45_49  0x00080000
+#define UNI_N_CLOCK_STOPPED_I2S0_18     0x00040000
+#define UNI_N_CLOCK_STOPPED_I2S1_45_49  0x00020000
+#define UNI_N_CLOCK_STOPPED_I2S1_18     0x00010000
+#define UNI_N_CLOCK_STOPPED_TIMER       0x00008000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000
+#define UNI_N_CLOCK_STOPPED_SCC_VIA32   0x00001000
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT0   0x00000800
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT1   0x00000400
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT2   0x00000200
+#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO  0x00000100
+#define UNI_N_CLOCK_STOPPED_VEO0        0x00000080
+#define UNI_N_CLOCK_STOPPED_VEO1        0x00000040
+#define UNI_N_CLOCK_STOPPED_USB0        0x00000020
+#define UNI_N_CLOCK_STOPPED_USB1        0x00000010
+#define UNI_N_CLOCK_STOPPED_USB2        0x00000008
+#define UNI_N_CLOCK_STOPPED_32          0x00000004
+#define UNI_N_CLOCK_STOPPED_45          0x00000002
+#define UNI_N_CLOCK_STOPPED_49          0x00000001
+
+#define UNI_N_CLOCK_STOP_STATUS1        0x0160
+#define UNI_N_CLOCK_STOPPED_PLL4REF     0x00080000
+#define UNI_N_CLOCK_STOPPED_CPUDEL      0x00040000
+#define UNI_N_CLOCK_STOPPED_CPU         0x00020000
+#define UNI_N_CLOCK_STOPPED_BUF_REFCKO  0x00010000
+#define UNI_N_CLOCK_STOPPED_PCI2        0x00008000
+#define UNI_N_CLOCK_STOPPED_FW          0x00004000
+#define UNI_N_CLOCK_STOPPED_GB          0x00002000
+#define UNI_N_CLOCK_STOPPED_ATA66       0x00001000
+#define UNI_N_CLOCK_STOPPED_ATA100      0x00000800
+#define UNI_N_CLOCK_STOPPED_MAX         0x00000400
+#define UNI_N_CLOCK_STOPPED_PCI1        0x00000200
+#define UNI_N_CLOCK_STOPPED_KLPCI       0x00000100
+#define UNI_N_CLOCK_STOPPED_USB0PCI     0x00000080
+#define UNI_N_CLOCK_STOPPED_USB1PCI     0x00000040
+#define UNI_N_CLOCK_STOPPED_USB2PCI     0x00000020
+#define UNI_N_CLOCK_STOPPED_7PCI1       0x00000008
+#define UNI_N_CLOCK_STOPPED_AGP         0x00000004
+#define UNI_N_CLOCK_STOPPED_PCI0        0x00000002
+#define UNI_N_CLOCK_STOPPED_18          0x00000001
+
+/* Intrepid registe to OF do-platform-clockspreading */
+#define UNI_N_CLOCK_SPREADING           0x190
+
+/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
+
+
+/*
+ * U3 specific registers
+ */
+
+
+/* U3 Toggle */
+#define U3_TOGGLE_REG                   0x00e0
+#define U3_PMC_START_STOP               0x0001
+#define U3_MPIC_RESET                   0x0002
+#define U3_MPIC_OUTPUT_ENABLE           0x0004
+
+/* U3 API PHY Config 1 */
+#define U3_API_PHY_CONFIG_1             0x23030
+
+/* U3 HyperTransport registers */
+#define U3_HT_CONFIG_BASE               0x70000
+#define U3_HT_LINK_COMMAND              0x100
+#define U3_HT_LINK_CONFIG               0x110
+#define U3_HT_LINK_FREQ                 0x120
+
+#endif /* __ASM_UNINORTH_H__ */
+#endif /* __KERNEL__ */