Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 127 insertions, 0 deletions

diff --git a/include/asm-ppc/pc_serial.h b/include/asm-ppc/pc_serial.h
new file mode 100644
index 000000000000..fa9cbb67ce3e
--- /dev/null
+++ b/include/asm-ppc/pc_serial.h
@@ -0,0 +1,127 @@
+/*
+ * include/asm-ppc/pc_serial.h
+ *
+ * This is basically a copy of include/asm-i386/serial.h.
+ * It is used on platforms which have an ISA bus and thus are likely
+ * to have PC-style serial ports at the legacy I/O port addresses.
+ * It also includes the definitions for the fourport, accent, boca
+ * and hub6 multiport serial cards, although I have never heard of
+ * anyone using any of those on a PPC platform.  -- paulus
+ */
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define RS_TABLE_SIZE  64
+#else
+#define RS_TABLE_SIZE  4
+#endif
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#define HUB6_FLAGS 0
+#endif
+        
+/*
+ * The following define the access methods for the HUB6 card. All
+ * access is through two ports for all 24 possible chips. The card is
+ * selected through the high 2 bits, the port on that card with the
+ * "middle" 3 bits, and the register on that port with the bottom
+ * 3 bits.
+ *
+ * While the access port and interrupt is configurable, the default
+ * port locations are 0x302 for the port control register, and 0x303
+ * for the data read/write register. Normally, the interrupt is at irq3
+ * but can be anything from 3 to 7 inclusive. Note that using 3 will
+ * require disabling com2.
+ */
+
+#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+
+#define STD_SERIAL_PORT_DEFNS                   \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },      /* ttyS0 */     \
+        { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },      /* ttyS1 */     \
+        { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },      /* ttyS2 */     \
+        { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },     /* ttyS3 */
+
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define EXTRA_SERIAL_PORT_DEFNS                 \
+        { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS },     /* ttyS4 */     \
+        { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },     /* ttyS5 */     \
+        { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },     /* ttyS6 */     \
+        { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },     /* ttyS7 */     \
+        { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },     /* ttyS8 */     \
+        { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },     /* ttyS9 */     \
+        { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },     /* ttyS10 */    \
+        { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },     /* ttyS11 */    \
+        { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },       /* ttyS12 */    \
+        { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },       /* ttyS13 */    \
+        { 0, BASE_BAUD, 0x000, 0, 0 },  /* ttyS14 (spare) */            \
+        { 0, BASE_BAUD, 0x000, 0, 0 },  /* ttyS15 (spare) */            \
+        { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },        /* ttyS16 */    \
+        { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },        /* ttyS17 */    \
+        { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },        /* ttyS18 */    \
+        { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },        /* ttyS19 */    \
+        { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },        /* ttyS20 */    \
+        { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },        /* ttyS21 */    \
+        { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },        /* ttyS22 */    \
+        { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },        /* ttyS23 */    \
+        { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },        /* ttyS24 */    \
+        { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },        /* ttyS25 */    \
+        { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },        /* ttyS26 */    \
+        { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },        /* ttyS27 */    \
+        { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },        /* ttyS28 */    \
+        { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },        /* ttyS29 */    \
+        { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },        /* ttyS30 */    \
+        { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },        /* ttyS31 */
+#else
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif
+
+/* You can have up to four HUB6's in the system, but I've only
+ * included two cards here for a total of twelve ports.
+ */
+#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
+#define HUB6_SERIAL_PORT_DFNS           \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */ \
+        { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
+#else
+#define HUB6_SERIAL_PORT_DFNS
+#endif
+
+#define SERIAL_PORT_DFNS                \
+        STD_SERIAL_PORT_DEFNS           \
+        EXTRA_SERIAL_PORT_DEFNS         \
+        HUB6_SERIAL_PORT_DFNS