Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 566 insertions, 0 deletions

diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
new file mode 100644
index 000000000000..7eb7cf6360bd
--- /dev/null
+++ b/include/asm-ppc/io.h
@@ -0,0 +1,566 @@
+#ifdef __KERNEL__
+#ifndef _PPC_IO_H
+#define _PPC_IO_H
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+#include <asm/byteorder.h>
+#include <asm/mmu.h>
+
+#define SIO_CONFIG_RA   0x398
+#define SIO_CONFIG_RD   0x399
+
+#define SLOW_DOWN_IO
+
+#define PMAC_ISA_MEM_BASE       0
+#define PMAC_PCI_DRAM_OFFSET    0
+#define CHRP_ISA_IO_BASE        0xf8000000
+#define CHRP_ISA_MEM_BASE       0xf7000000
+#define CHRP_PCI_DRAM_OFFSET    0
+#define PREP_ISA_IO_BASE        0x80000000
+#define PREP_ISA_MEM_BASE       0xc0000000
+#define PREP_PCI_DRAM_OFFSET    0x80000000
+
+#if defined(CONFIG_4xx)
+#include <asm/ibm4xx.h>
+#elif defined(CONFIG_8xx)
+#include <asm/mpc8xx.h>
+#elif defined(CONFIG_8260)
+#include <asm/mpc8260.h>
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+#elif defined(CONFIG_85xx)
+#include <asm/mpc85xx.h>
+#elif defined(CONFIG_APUS)
+#define _IO_BASE        0
+#define _ISA_MEM_BASE   0
+#define PCI_DRAM_OFFSET 0
+#else /* Everyone else */
+#define _IO_BASE        isa_io_base
+#define _ISA_MEM_BASE   isa_mem_base
+#define PCI_DRAM_OFFSET pci_dram_offset
+#endif /* Platform-dependent I/O */
+
+#define ___IO_BASE ((void __iomem *)_IO_BASE)
+extern unsigned long isa_io_base;
+extern unsigned long isa_mem_base;
+extern unsigned long pci_dram_offset;
+
+/*
+ * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
+ *
+ * Read operations have additional twi & isync to make sure the read
+ * is actually performed (i.e. the data has come back) before we start
+ * executing any following instructions.
+ */
+extern inline int in_8(volatile unsigned char __iomem *addr)
+{
+        int ret;
+
+        __asm__ __volatile__(
+                "lbz%U1%X1 %0,%1;\n"
+                "twi 0,%0,0;\n"
+                "isync" : "=r" (ret) : "m" (*addr));
+        return ret;
+}
+
+extern inline void out_8(volatile unsigned char __iomem *addr, int val)
+{
+        __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+
+extern inline int in_le16(volatile unsigned short __iomem *addr)
+{
+        int ret;
+
+        __asm__ __volatile__("lhbrx %0,0,%1;\n"
+                             "twi 0,%0,0;\n"
+                             "isync" : "=r" (ret) :
+                              "r" (addr), "m" (*addr));
+        return ret;
+}
+
+extern inline int in_be16(volatile unsigned short __iomem *addr)
+{
+        int ret;
+
+        __asm__ __volatile__("lhz%U1%X1 %0,%1;\n"
+                             "twi 0,%0,0;\n"
+                             "isync" : "=r" (ret) : "m" (*addr));
+        return ret;
+}
+
+extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
+{
+        __asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) :
+                              "r" (val), "r" (addr));
+}
+
+extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
+{
+        __asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+
+extern inline unsigned in_le32(volatile unsigned __iomem *addr)
+{
+        unsigned ret;
+
+        __asm__ __volatile__("lwbrx %0,0,%1;\n"
+                             "twi 0,%0,0;\n"
+                             "isync" : "=r" (ret) :
+                             "r" (addr), "m" (*addr));
+        return ret;
+}
+
+extern inline unsigned in_be32(volatile unsigned __iomem *addr)
+{
+        unsigned ret;
+
+        __asm__ __volatile__("lwz%U1%X1 %0,%1;\n"
+                             "twi 0,%0,0;\n"
+                             "isync" : "=r" (ret) : "m" (*addr));
+        return ret;
+}
+
+extern inline void out_le32(volatile unsigned __iomem *addr, int val)
+{
+        __asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) :
+                             "r" (val), "r" (addr));
+}
+
+extern inline void out_be32(volatile unsigned __iomem *addr, int val)
+{
+        __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+}
+#if defined (CONFIG_8260_PCI9)
+#define readb(addr) in_8((volatile u8 *)(addr))
+#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
+#else
+static inline __u8 readb(volatile void __iomem *addr)
+{
+        return in_8(addr);
+}
+static inline void writeb(__u8 b, volatile void __iomem *addr)
+{
+        out_8(addr, b);
+}
+#endif
+
+#if defined(CONFIG_APUS)
+static inline __u16 readw(volatile void __iomem *addr)
+{
+        return *(__force volatile __u16 *)(addr);
+}
+static inline __u32 readl(volatile void __iomem *addr)
+{
+        return *(__force volatile __u32 *)(addr);
+}
+static inline void writew(__u16 b, volatile void __iomem *addr)
+{
+        *(__force volatile __u16 *)(addr) = b;
+}
+static inline void writel(__u32 b, volatile void __iomem *addr)
+{
+        *(__force volatile __u32 *)(addr) = b;
+}
+#elif defined (CONFIG_8260_PCI9)
+/* Use macros if PCI9 workaround enabled */
+#define readw(addr) in_le16((volatile u16 *)(addr))
+#define readl(addr) in_le32((volatile u32 *)(addr))
+#define writew(b,addr) out_le16((volatile u16 *)(addr),(b))
+#define writel(b,addr) out_le32((volatile u32 *)(addr),(b))
+#else
+static inline __u16 readw(volatile void __iomem *addr)
+{
+        return in_le16(addr);
+}
+static inline __u32 readl(volatile void __iomem *addr)
+{
+        return in_le32(addr);
+}
+static inline void writew(__u16 b, volatile void __iomem *addr)
+{
+        out_le16(addr, b);
+}
+static inline void writel(__u32 b, volatile void __iomem *addr)
+{
+        out_le32(addr, b);
+}
+#endif /* CONFIG_APUS */
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+static inline __u8 __raw_readb(const volatile void __iomem *addr)
+{
+        return *(__force volatile __u8 *)(addr);
+}
+static inline __u16 __raw_readw(const volatile void __iomem *addr)
+{
+        return *(__force volatile __u16 *)(addr);
+}
+static inline __u32 __raw_readl(const volatile void __iomem *addr)
+{
+        return *(__force volatile __u32 *)(addr);
+}
+static inline void __raw_writeb(__u8 b, volatile void __iomem *addr)
+{
+        *(__force volatile __u8 *)(addr) = b;
+}
+static inline void __raw_writew(__u16 b, volatile void __iomem *addr)
+{
+        *(__force volatile __u16 *)(addr) = b;
+}
+static inline void __raw_writel(__u32 b, volatile void __iomem *addr)
+{
+        *(__force volatile __u32 *)(addr) = b;
+}
+
+#define mmiowb()
+
+/*
+ * The insw/outsw/insl/outsl macros don't do byte-swapping.
+ * They are only used in practice for transferring buffers which
+ * are arrays of bytes, and byte-swapping is not appropriate in
+ * that case.  - paulus
+ */
+#define insb(port, buf, ns)     _insb((port)+___IO_BASE, (buf), (ns))
+#define outsb(port, buf, ns)    _outsb((port)+___IO_BASE, (buf), (ns))
+#define insw(port, buf, ns)     _insw_ns((port)+___IO_BASE, (buf), (ns))
+#define outsw(port, buf, ns)    _outsw_ns((port)+___IO_BASE, (buf), (ns))
+#define insl(port, buf, nl)     _insl_ns((port)+___IO_BASE, (buf), (nl))
+#define outsl(port, buf, nl)    _outsl_ns((port)+___IO_BASE, (buf), (nl))
+
+/*
+ * On powermacs, we will get a machine check exception if we
+ * try to read data from a non-existent I/O port.  Because the
+ * machine check is an asynchronous exception, it isn't
+ * well-defined which instruction SRR0 will point to when the
+ * exception occurs.
+ * With the sequence below (twi; isync; nop), we have found that
+ * the machine check occurs on one of the three instructions on
+ * all PPC implementations tested so far.  The twi and isync are
+ * needed on the 601 (in fact twi; sync works too), the isync and
+ * nop are needed on 604[e|r], and any of twi, sync or isync will
+ * work on 603[e], 750, 74xx.
+ * The twi creates an explicit data dependency on the returned
+ * value which seems to be needed to make the 601 wait for the
+ * load to finish.
+ */
+
+#define __do_in_asm(name, op)                           \
+extern __inline__ unsigned int name(unsigned int port)  \
+{                                                       \
+        unsigned int x;                                 \
+        __asm__ __volatile__(                           \
+                        op "    %0,0,%1\n"              \
+                "1:     twi     0,%0,0\n"               \
+                "2:     isync\n"                        \
+                "3:     nop\n"                          \
+                "4:\n"                                  \
+                ".section .fixup,\"ax\"\n"              \
+                "5:     li      %0,-1\n"                \
+                "       b       4b\n"                   \
+                ".previous\n"                           \
+                ".section __ex_table,\"a\"\n"           \
+                "       .align  2\n"                    \
+                "       .long   1b,5b\n"                \
+                "       .long   2b,5b\n"                \
+                "       .long   3b,5b\n"                \
+                ".previous"                             \
+                : "=&r" (x)                             \
+                : "r" (port + ___IO_BASE));             \
+        return x;                                       \
+}
+
+#define __do_out_asm(name, op)                          \
+extern __inline__ void name(unsigned int val, unsigned int port) \
+{                                                       \
+        __asm__ __volatile__(                           \
+                op " %0,0,%1\n"                         \
+                "1:     sync\n"                         \
+                "2:\n"                                  \
+                ".section __ex_table,\"a\"\n"           \
+                "       .align  2\n"                    \
+                "       .long   1b,2b\n"                \
+                ".previous"                             \
+                : : "r" (val), "r" (port + ___IO_BASE));        \
+}
+
+__do_out_asm(outb, "stbx")
+#ifdef CONFIG_APUS
+__do_in_asm(inb, "lbzx")
+__do_in_asm(inw, "lhz%U1%X1")
+__do_in_asm(inl, "lwz%U1%X1")
+__do_out_asm(outl,"stw%U0%X0")
+__do_out_asm(outw, "sth%U0%X0")
+#elif defined (CONFIG_8260_PCI9)
+/* in asm cannot be defined if PCI9 workaround is used */
+#define inb(port)               in_8((port)+___IO_BASE)
+#define inw(port)               in_le16((port)+___IO_BASE)
+#define inl(port)               in_le32((port)+___IO_BASE)
+__do_out_asm(outw, "sthbrx")
+__do_out_asm(outl, "stwbrx")
+#else
+__do_in_asm(inb, "lbzx")
+__do_in_asm(inw, "lhbrx")
+__do_in_asm(inl, "lwbrx")
+__do_out_asm(outw, "sthbrx")
+__do_out_asm(outl, "stwbrx")
+
+#endif
+
+#define inb_p(port)             inb((port))
+#define outb_p(val, port)       outb((val), (port))
+#define inw_p(port)             inw((port))
+#define outw_p(val, port)       outw((val), (port))
+#define inl_p(port)             inl((port))
+#define outl_p(val, port)       outl((val), (port))
+
+extern void _insb(volatile u8 __iomem *port, void *buf, int ns);
+extern void _outsb(volatile u8 __iomem *port, const void *buf, int ns);
+extern void _insw(volatile u16 __iomem *port, void *buf, int ns);
+extern void _outsw(volatile u16 __iomem *port, const void *buf, int ns);
+extern void _insl(volatile u32 __iomem *port, void *buf, int nl);
+extern void _outsl(volatile u32 __iomem *port, const void *buf, int nl);
+extern void _insw_ns(volatile u16 __iomem *port, void *buf, int ns);
+extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, int ns);
+extern void _insl_ns(volatile u32 __iomem *port, void *buf, int nl);
+extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, int nl);
+
+/*
+ * The *_ns versions below don't do byte-swapping.
+ * Neither do the standard versions now, these are just here
+ * for older code.
+ */
+#define insw_ns(port, buf, ns)  _insw_ns((port)+___IO_BASE, (buf), (ns))
+#define outsw_ns(port, buf, ns) _outsw_ns((port)+___IO_BASE, (buf), (ns))
+#define insl_ns(port, buf, nl)  _insl_ns((port)+___IO_BASE, (buf), (nl))
+#define outsl_ns(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl))
+
+
+#define IO_SPACE_LIMIT ~0
+
+#if defined (CONFIG_8260_PCI9)
+#define memset_io(a,b,c)       memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)   memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)     memcpy((void *)(a),(b),(c))
+#else
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+        memset((void __force *)addr, val, count);
+}
+static inline void memcpy_fromio(void *dst,const volatile void __iomem *src, int count)
+{
+        memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+        memcpy((void __force *) dst, src, count);
+}
+#endif
+
+#define eth_io_copy_and_sum(a,b,c,d)            eth_copy_and_sum((a),(void __force *)(void __iomem *)(b),(c),(d))
+
+/*
+ * Map in an area of physical address space, for accessing
+ * I/O devices etc.
+ */
+extern void __iomem *__ioremap(phys_addr_t address, unsigned long size,
+                       unsigned long flags);
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#ifdef CONFIG_44x
+extern void __iomem *ioremap64(unsigned long long address, unsigned long size);
+#endif
+#define ioremap_nocache(addr, size)     ioremap((addr), (size))
+extern void iounmap(volatile void __iomem *addr);
+extern unsigned long iopa(unsigned long addr);
+extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
+extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
+                             unsigned int size, int flags);
+
+/*
+ * The PCI bus is inherently Little-Endian.  The PowerPC is being
+ * run Big-Endian.  Thus all values which cross the [PCI] barrier
+ * must be endian-adjusted.  Also, the local DRAM has a different
+ * address from the PCI point of view, thus buffer addresses also
+ * have to be modified [mapped] appropriately.
+ */
+extern inline unsigned long virt_to_bus(volatile void * address)
+{
+#ifndef CONFIG_APUS
+        if (address == (void *)0)
+                return 0;
+        return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET;
+#else
+        return iopa ((unsigned long) address);
+#endif
+}
+
+extern inline void * bus_to_virt(unsigned long address)
+{
+#ifndef CONFIG_APUS
+        if (address == 0)
+                return NULL;
+        return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE);
+#else
+        return (void*) mm_ptov (address);
+#endif
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv, for
+ * addresses in the area where the kernel has the RAM mapped.
+ */
+extern inline unsigned long virt_to_phys(volatile void * address)
+{
+#ifndef CONFIG_APUS
+        return (unsigned long) address - KERNELBASE;
+#else
+        return iopa ((unsigned long) address);
+#endif
+}
+
+extern inline void * phys_to_virt(unsigned long address)
+{
+#ifndef CONFIG_APUS
+        return (void *) (address + KERNELBASE);
+#else
+        return (void*) mm_ptov (address);
+#endif
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
+#define page_to_bus(page)       (page_to_phys(page) + PCI_DRAM_OFFSET)
+
+/*
+ * Enforce In-order Execution of I/O:
+ * Acts as a barrier to ensure all previous I/O accesses have
+ * completed before any further ones are issued.
+ */
+extern inline void eieio(void)
+{
+        __asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+/* Enforce in-order execution of data I/O.
+ * No distinction between read/write on PPC; use eieio for all three.
+ */
+#define iobarrier_rw() eieio()
+#define iobarrier_r()  eieio()
+#define iobarrier_w()  eieio()
+
+static inline int check_signature(volatile void __iomem * io_addr,
+        const unsigned char *signature, int length)
+{
+        int retval = 0;
+        do {
+                if (readb(io_addr) != *signature)
+                        goto out;
+                io_addr++;
+                signature++;
+                length--;
+        } while (length);
+        retval = 1;
+out:
+        return retval;
+}
+
+/*
+ * Here comes the ppc implementation of the IOMAP 
+ * interfaces.
+ */
+static inline unsigned int ioread8(void __iomem *addr)
+{
+        return readb(addr);
+}
+
+static inline unsigned int ioread16(void __iomem *addr)
+{
+        return readw(addr);
+}
+
+static inline unsigned int ioread32(void __iomem *addr)
+{
+        return readl(addr);
+}
+
+static inline void iowrite8(u8 val, void __iomem *addr)
+{
+        writeb(val, addr);
+}
+
+static inline void iowrite16(u16 val, void __iomem *addr)
+{
+        writew(val, addr);
+}
+
+static inline void iowrite32(u32 val, void __iomem *addr)
+{
+        writel(val, addr);
+}
+
+static inline void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+        _insb(addr, dst, count);
+}
+
+static inline void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+        _insw_ns(addr, dst, count);
+}
+
+static inline void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+        _insl_ns(addr, dst, count);
+}
+
+static inline void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+        _outsb(addr, src, count);
+}
+
+static inline void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+        _outsw_ns(addr, src, count);
+}
+
+static inline void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+        _outsl_ns(addr, src, count);
+}
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+#endif /* _PPC_IO_H */
+
+#ifdef CONFIG_8260_PCI9
+#include <asm/mpc8260_pci9.h>
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+#endif /* __KERNEL__ */