aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc/uninorth.h
diff options
context:
space:
mode:
authorStephen Rothwell <sfr@canb.auug.org.au>2008-08-01 01:20:30 -0400
committerPaul Mackerras <paulus@samba.org>2008-08-03 22:02:00 -0400
commitb8b572e1015f81b4e748417be2629dfe51ab99f9 (patch)
tree7df58667d5ed71d6c8f8f4ce40ca16b6fb776d0b /include/asm-powerpc/uninorth.h
parent2b12a4c524812fb3f6ee590a02e65b95c8c32229 (diff)
powerpc: Move include files to arch/powerpc/include/asm
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'include/asm-powerpc/uninorth.h')
-rw-r--r--include/asm-powerpc/uninorth.h229
1 files changed, 0 insertions, 229 deletions
diff --git a/include/asm-powerpc/uninorth.h b/include/asm-powerpc/uninorth.h
deleted file mode 100644
index f737732c3861..000000000000
--- a/include/asm-powerpc/uninorth.h
+++ /dev/null
@@ -1,229 +0,0 @@
1/*
2 * uninorth.h: definitions for using the "UniNorth" host bridge chip
3 * from Apple. This chip is used on "Core99" machines
4 * This also includes U2 used on more recent MacRISC2/3
5 * machines and U3 (G5)
6 *
7 */
8#ifdef __KERNEL__
9#ifndef __ASM_UNINORTH_H__
10#define __ASM_UNINORTH_H__
11
12/*
13 * Uni-N and U3 config space reg. definitions
14 *
15 * (Little endian)
16 */
17
18/* Address ranges selection. This one should work with Bandit too */
19/* Not U3 */
20#define UNI_N_ADDR_SELECT 0x48
21#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */
22#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */
23
24/* AGP registers */
25/* Not U3 */
26#define UNI_N_CFG_GART_BASE 0x8c
27#define UNI_N_CFG_AGP_BASE 0x90
28#define UNI_N_CFG_GART_CTRL 0x94
29#define UNI_N_CFG_INTERNAL_STATUS 0x98
30#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4
31
32/* UNI_N_CFG_GART_CTRL bits definitions */
33#define UNI_N_CFG_GART_INVAL 0x00000001
34#define UNI_N_CFG_GART_ENABLE 0x00000100
35#define UNI_N_CFG_GART_2xRESET 0x00010000
36#define UNI_N_CFG_GART_DISSBADET 0x00020000
37/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
38#define U3_N_CFG_GART_SYNCMODE 0x00040000
39#define U3_N_CFG_GART_PERFRD 0x00080000
40#define U3_N_CFG_GART_B2BGNT 0x00200000
41#define U3_N_CFG_GART_FASTDDR 0x00400000
42
43/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
44 * revision 1.5 (x4 AGP) may need further changes.
45 *
46 * AGP_BASE register contains the base address of the AGP aperture on
47 * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
48 * even if decoding of this address range is enabled in the address select
49 * register. Apparently, the only supported bases are 256Mb multiples
50 * (high 4 bits of that register).
51 *
52 * GART_BASE register appear to contain the physical address of the GART
53 * in system memory in the high address bits (page aligned), and the
54 * GART size in the low order bits (number of GART pages)
55 *
56 * The GART format itself is one 32bits word per physical memory page.
57 * This word contains, in little-endian format (!!!), the physical address
58 * of the page in the high bits, and what appears to be an "enable" bit
59 * in the LSB bit (0) that must be set to 1 when the entry is valid.
60 *
61 * Obviously, the GART is not cache coherent and so any change to it
62 * must be flushed to memory (or maybe just make the GART space non
63 * cachable). AGP memory itself doens't seem to be cache coherent neither.
64 *
65 * In order to invalidate the GART (which is probably necessary to inval
66 * the bridge internal TLBs), the following sequence has to be written,
67 * in order, to the GART_CTRL register:
68 *
69 * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
70 * UNI_N_CFG_GART_ENABLE
71 * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
72 * UNI_N_CFG_GART_ENABLE
73 *
74 * As far as AGP "features" are concerned, it looks like fast write may
75 * not be supported but this has to be confirmed.
76 *
77 * Turning on AGP seem to require a double invalidate operation, one before
78 * setting the AGP command register, on after.
79 *
80 * Turning off AGP seems to require the following sequence: first wait
81 * for the AGP to be idle by reading the internal status register, then
82 * write in that order to the GART_CTRL register:
83 *
84 * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
85 * 0
86 * UNI_N_CFG_GART_2xRESET
87 * 0
88 */
89
90/*
91 * Uni-N memory mapped reg. definitions
92 *
93 * Those registers are Big-Endian !!
94 *
95 * Their meaning come from either Darwin and/or from experiments I made with
96 * the bootrom, I'm not sure about their exact meaning yet
97 *
98 */
99
100/* Version of the UniNorth chip */
101#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */
102
103#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */
104#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */
105#define UNI_N_VERSION_150 0x0011 /* 1.5 */
106#define UNI_N_VERSION_200 0x0024 /* 2.0 */
107#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */
108#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */
109#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */
110
111/* This register is used to enable/disable various clocks */
112#define UNI_N_CLOCK_CNTL 0x0020
113#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */
114#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */
115#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */
116#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */
117
118/* Power Management control */
119#define UNI_N_POWER_MGT 0x0030
120#define UNI_N_POWER_MGT_NORMAL 0x00
121#define UNI_N_POWER_MGT_IDLE2 0x01
122#define UNI_N_POWER_MGT_SLEEP 0x02
123
124/* This register is configured by Darwin depending on the UniN
125 * revision
126 */
127#define UNI_N_ARB_CTRL 0x0040
128#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15
129#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000
130#define UNI_N_ARB_CTRL_QACK_DELAY 0x30
131#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00
132
133/* This one _might_ return the CPU number of the CPU reading it;
134 * the bootROM decides whether to boot or to sleep/spinloop depending
135 * on this register beeing 0 or not
136 */
137#define UNI_N_CPU_NUMBER 0x0050
138
139/* This register appear to be read by the bootROM to decide what
140 * to do on a non-recoverable reset (powerup or wakeup)
141 */
142#define UNI_N_HWINIT_STATE 0x0070
143#define UNI_N_HWINIT_STATE_SLEEPING 0x01
144#define UNI_N_HWINIT_STATE_RUNNING 0x02
145/* This last bit appear to be used by the bootROM to know the second
146 * CPU has started and will enter it's sleep loop with IP=0
147 */
148#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000
149
150/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
151 * is in low speed mode.
152 */
153#define UNI_N_AACK_DELAY 0x0100
154#define UNI_N_AACK_DELAY_ENABLE 0x00000001
155
156/* Clock status for Intrepid */
157#define UNI_N_CLOCK_STOP_STATUS0 0x0150
158#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000
159#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000
160#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000
161#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000
162#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000
163#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000
164#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000
165#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000
166#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000
167#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000
168#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800
169#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400
170#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200
171#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100
172#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080
173#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040
174#define UNI_N_CLOCK_STOPPED_USB0 0x00000020
175#define UNI_N_CLOCK_STOPPED_USB1 0x00000010
176#define UNI_N_CLOCK_STOPPED_USB2 0x00000008
177#define UNI_N_CLOCK_STOPPED_32 0x00000004
178#define UNI_N_CLOCK_STOPPED_45 0x00000002
179#define UNI_N_CLOCK_STOPPED_49 0x00000001
180
181#define UNI_N_CLOCK_STOP_STATUS1 0x0160
182#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000
183#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000
184#define UNI_N_CLOCK_STOPPED_CPU 0x00020000
185#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000
186#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000
187#define UNI_N_CLOCK_STOPPED_FW 0x00004000
188#define UNI_N_CLOCK_STOPPED_GB 0x00002000
189#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000
190#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800
191#define UNI_N_CLOCK_STOPPED_MAX 0x00000400
192#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200
193#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100
194#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080
195#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040
196#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020
197#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008
198#define UNI_N_CLOCK_STOPPED_AGP 0x00000004
199#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002
200#define UNI_N_CLOCK_STOPPED_18 0x00000001
201
202/* Intrepid registe to OF do-platform-clockspreading */
203#define UNI_N_CLOCK_SPREADING 0x190
204
205/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
206
207
208/*
209 * U3 specific registers
210 */
211
212
213/* U3 Toggle */
214#define U3_TOGGLE_REG 0x00e0
215#define U3_PMC_START_STOP 0x0001
216#define U3_MPIC_RESET 0x0002
217#define U3_MPIC_OUTPUT_ENABLE 0x0004
218
219/* U3 API PHY Config 1 */
220#define U3_API_PHY_CONFIG_1 0x23030
221
222/* U3 HyperTransport registers */
223#define U3_HT_CONFIG_BASE 0x70000
224#define U3_HT_LINK_COMMAND 0x100
225#define U3_HT_LINK_CONFIG 0x110
226#define U3_HT_LINK_FREQ 0x120
227
228#endif /* __ASM_UNINORTH_H__ */
229#endif /* __KERNEL__ */
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-01 06:36:38 -0500