powerpc: Merge various powermac-related header files.

Except for smu.h, which moved from asm-ppc64 to asm-powerpc, all
of these moved from asm-ppc to asm-powerpc.  In each case the
asm-ppc64 version (if there was one) was just a single line
including the asm-ppc version.

Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 248 insertions, 0 deletions

diff --git a/include/asm-powerpc/keylargo.h b/include/asm-powerpc/keylargo.h
new file mode 100644
index 000000000000..a669a3f0f5a2
--- /dev/null
+++ b/include/asm-powerpc/keylargo.h
@@ -0,0 +1,248 @@
+/*
+ * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
+ *
+ */
+
+/* "Pangea" chipset has keylargo device-id 0x25 while core99
+ * has device-id 0x22. The rev. of the pangea one is 0, so we
+ * fake an artificial rev. in keylargo_rev by oring 0x100
+ */
+#define KL_PANGEA_REV           0x100
+
+/* offset from base for feature control registers */
+#define KEYLARGO_MBCR           0x34    /* KL Only, Media bay control/status */
+#define KEYLARGO_FCR0           0x38
+#define KEYLARGO_FCR1           0x3c
+#define KEYLARGO_FCR2           0x40
+#define KEYLARGO_FCR3           0x44
+#define KEYLARGO_FCR4           0x48
+#define KEYLARGO_FCR5           0x4c    /* Pangea only */
+
+/* K2 aditional FCRs */
+#define K2_FCR6                 0x34
+#define K2_FCR7                 0x30
+#define K2_FCR8                 0x2c
+#define K2_FCR9                 0x28
+#define K2_FCR10                0x24
+
+/* GPIO registers */
+#define KEYLARGO_GPIO_LEVELS0           0x50
+#define KEYLARGO_GPIO_LEVELS1           0x54
+#define KEYLARGO_GPIO_EXTINT_0          0x58
+#define KEYLARGO_GPIO_EXTINT_CNT        18
+#define KEYLARGO_GPIO_0                 0x6A
+#define KEYLARGO_GPIO_CNT               17
+#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE  0x80
+#define KEYLARGO_GPIO_OUTPUT_ENABLE     0x04
+#define KEYLARGO_GPIO_OUTOUT_DATA       0x01
+#define KEYLARGO_GPIO_INPUT_DATA        0x02
+
+/* K2 does only extint GPIOs and does 51 of them */
+#define K2_GPIO_EXTINT_0                0x58
+#define K2_GPIO_EXTINT_CNT              51
+
+/* Specific GPIO regs */
+
+#define KL_GPIO_MODEM_RESET             (KEYLARGO_GPIO_0+0x03)
+#define KL_GPIO_MODEM_POWER             (KEYLARGO_GPIO_0+0x02) /* Pangea */
+
+#define KL_GPIO_SOUND_POWER             (KEYLARGO_GPIO_0+0x05)
+
+/* Hrm... this one is only to be used on Pismo. It seeem to also
+ * control the timebase enable on other machines. Still to be
+ * experimented... --BenH.
+ */
+#define KL_GPIO_FW_CABLE_POWER          (KEYLARGO_GPIO_0+0x09)
+#define KL_GPIO_TB_ENABLE               (KEYLARGO_GPIO_0+0x09)
+
+#define KL_GPIO_ETH_PHY_RESET           (KEYLARGO_GPIO_0+0x10)
+
+#define KL_GPIO_EXTINT_CPU1             (KEYLARGO_GPIO_0+0x0a)
+#define KL_GPIO_EXTINT_CPU1_ASSERT      0x04
+#define KL_GPIO_EXTINT_CPU1_RELEASE     0x38
+
+#define KL_GPIO_RESET_CPU0              (KEYLARGO_GPIO_EXTINT_0+0x03)
+#define KL_GPIO_RESET_CPU1              (KEYLARGO_GPIO_EXTINT_0+0x04)
+#define KL_GPIO_RESET_CPU2              (KEYLARGO_GPIO_EXTINT_0+0x0f)
+#define KL_GPIO_RESET_CPU3              (KEYLARGO_GPIO_EXTINT_0+0x10)
+
+#define KL_GPIO_PMU_MESSAGE_IRQ         (KEYLARGO_GPIO_EXTINT_0+0x09)
+#define KL_GPIO_PMU_MESSAGE_BIT         KEYLARGO_GPIO_INPUT_DATA
+
+#define KL_GPIO_MEDIABAY_IRQ            (KEYLARGO_GPIO_EXTINT_0+0x0e)
+
+#define KL_GPIO_AIRPORT_0               (KEYLARGO_GPIO_EXTINT_0+0x0a)
+#define KL_GPIO_AIRPORT_1               (KEYLARGO_GPIO_EXTINT_0+0x0d)
+#define KL_GPIO_AIRPORT_2               (KEYLARGO_GPIO_0+0x0d)
+#define KL_GPIO_AIRPORT_3               (KEYLARGO_GPIO_0+0x0e)
+#define KL_GPIO_AIRPORT_4               (KEYLARGO_GPIO_0+0x0f)
+
+/*
+ * Bits in feature control register. Those bits different for K2 are
+ * listed separately
+ */
+#define KL_MBCR_MB0_PCI_ENABLE          0x00000800      /* exist ? */
+#define KL_MBCR_MB0_IDE_ENABLE          0x00001000
+#define KL_MBCR_MB0_FLOPPY_ENABLE       0x00002000      /* exist ? */
+#define KL_MBCR_MB0_SOUND_ENABLE        0x00004000      /* hrm... */
+#define KL_MBCR_MB0_DEV_MASK            0x00007800
+#define KL_MBCR_MB0_DEV_POWER           0x00000400
+#define KL_MBCR_MB0_DEV_RESET           0x00000200
+#define KL_MBCR_MB0_ENABLE              0x00000100
+#define KL_MBCR_MB1_PCI_ENABLE          0x08000000      /* exist ? */
+#define KL_MBCR_MB1_IDE_ENABLE          0x10000000
+#define KL_MBCR_MB1_FLOPPY_ENABLE       0x20000000      /* exist ? */
+#define KL_MBCR_MB1_SOUND_ENABLE        0x40000000      /* hrm... */
+#define KL_MBCR_MB1_DEV_MASK            0x78000000
+#define KL_MBCR_MB1_DEV_POWER           0x04000000
+#define KL_MBCR_MB1_DEV_RESET           0x02000000
+#define KL_MBCR_MB1_ENABLE              0x01000000
+
+#define KL0_SCC_B_INTF_ENABLE           0x00000001      /* (KL Only) */
+#define KL0_SCC_A_INTF_ENABLE           0x00000002
+#define KL0_SCC_SLOWPCLK                0x00000004
+#define KL0_SCC_RESET                   0x00000008
+#define KL0_SCCA_ENABLE                 0x00000010
+#define KL0_SCCB_ENABLE                 0x00000020
+#define KL0_SCC_CELL_ENABLE             0x00000040
+#define KL0_IRDA_HIGH_BAND              0x00000100      /* (KL Only) */
+#define KL0_IRDA_SOURCE2_SEL            0x00000200      /* (KL Only) */
+#define KL0_IRDA_SOURCE1_SEL            0x00000400      /* (KL Only) */
+#define KL0_PG_USB0_PMI_ENABLE          0x00000400      /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_RESET                  0x00000800      /* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND_SEL     0x00000800      /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT1               0x00001000      /* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND         0x00001000      /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT0               0x00002000      /* (KL Only) */
+#define KL0_PG_USB0_PAD_SUSPEND         0x00002000      /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_FAST_CONNECT           0x00004000      /* (KL Only) */
+#define KL0_PG_USB1_PMI_ENABLE          0x00004000      /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_ENABLE                 0x00008000      /* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND_SEL     0x00008000      /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK32_ENABLE           0x00010000      /* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND         0x00010000      /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK19_ENABLE           0x00020000      /* (KL Only) */
+#define KL0_PG_USB1_PAD_SUSPEND         0x00020000      /* (Pangea/Intrepid Only) */
+#define KL0_USB0_PAD_SUSPEND0           0x00040000
+#define KL0_USB0_PAD_SUSPEND1           0x00080000
+#define KL0_USB0_CELL_ENABLE            0x00100000
+#define KL0_USB1_PAD_SUSPEND0           0x00400000
+#define KL0_USB1_PAD_SUSPEND1           0x00800000
+#define KL0_USB1_CELL_ENABLE            0x01000000
+#define KL0_USB_REF_SUSPEND             0x10000000      /* (KL Only) */
+
+#define KL0_SERIAL_ENABLE               (KL0_SCC_B_INTF_ENABLE | \
+                                        KL0_SCC_SLOWPCLK | \
+                                        KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
+
+#define KL1_USB2_PMI_ENABLE             0x00000001      /* Intrepid only */
+#define KL1_AUDIO_SEL_22MCLK            0x00000002      /* KL/Pangea only */
+#define KL1_USB2_REF_SUSPEND_SEL        0x00000002      /* Intrepid only */
+#define KL1_USB2_REF_SUSPEND            0x00000004      /* Intrepid only */
+#define KL1_AUDIO_CLK_ENABLE_BIT        0x00000008      /* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND_SEL        0x00000008      /* Intrepid only */
+#define KL1_USB2_PAD_SUSPEND0           0x00000010      /* Intrepid only */
+#define KL1_AUDIO_CLK_OUT_ENABLE        0x00000020      /* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND1           0x00000020      /* Intrepid only */
+#define KL1_AUDIO_CELL_ENABLE           0x00000040      /* KL/Pangea only */
+#define KL1_USB2_CELL_ENABLE            0x00000040      /* Intrepid only */
+#define KL1_AUDIO_CHOOSE                0x00000080      /* KL/Pangea only */
+#define KL1_I2S0_CHOOSE                 0x00000200      /* KL Only */
+#define KL1_I2S0_CELL_ENABLE            0x00000400
+#define KL1_I2S0_CLK_ENABLE_BIT         0x00001000
+#define KL1_I2S0_ENABLE                 0x00002000
+#define KL1_I2S1_CELL_ENABLE            0x00020000
+#define KL1_I2S1_CLK_ENABLE_BIT         0x00080000
+#define KL1_I2S1_ENABLE                 0x00100000
+#define KL1_EIDE0_ENABLE                0x00800000      /* KL/Intrepid Only */
+#define KL1_EIDE0_RESET_N               0x01000000      /* KL/Intrepid Only */
+#define KL1_EIDE1_ENABLE                0x04000000      /* KL Only */
+#define KL1_EIDE1_RESET_N               0x08000000      /* KL Only */
+#define KL1_UIDE_ENABLE                 0x20000000      /* KL/Pangea Only */
+#define KL1_UIDE_RESET_N                0x40000000      /* KL/Pangea Only */
+
+#define KL2_IOBUS_ENABLE                0x00000002
+#define KL2_SLEEP_STATE_BIT             0x00000100      /* KL Only */
+#define KL2_PG_STOP_ALL_CLOCKS          0x00000100      /* Pangea Only */
+#define KL2_MPIC_ENABLE                 0x00020000
+#define KL2_CARDSLOT_RESET              0x00040000      /* Pangea/Intrepid Only */
+#define KL2_ALT_DATA_OUT                0x02000000      /* KL Only ??? */
+#define KL2_MEM_IS_BIG                  0x04000000
+#define KL2_CARDSEL_16                  0x08000000
+
+#define KL3_SHUTDOWN_PLL_TOTAL          0x00000001      /* KL/Pangea only */
+#define KL3_SHUTDOWN_PLLKW6             0x00000002      /* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL3            0x00000002      /* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW4             0x00000004      /* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL2            0x00000004      /* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW35            0x00000008      /* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL1            0x00000008      /* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW12            0x00000010      /* KL Only */
+#define KL3_IT_ENABLE_PLL3_SHUTDOWN     0x00000010      /* Intrepid only */
+#define KL3_PLL_RESET                   0x00000020      /* KL/Pangea only */
+#define KL3_IT_ENABLE_PLL2_SHUTDOWN     0x00000020      /* Intrepid only */
+#define KL3_IT_ENABLE_PLL1_SHUTDOWN     0x00000010      /* Intrepid only */
+#define KL3_SHUTDOWN_PLL2X              0x00000080      /* KL Only */
+#define KL3_CLK66_ENABLE                0x00000100      /* KL Only */
+#define KL3_CLK49_ENABLE                0x00000200
+#define KL3_CLK45_ENABLE                0x00000400
+#define KL3_CLK31_ENABLE                0x00000800      /* KL/Pangea only */
+#define KL3_TIMER_CLK18_ENABLE          0x00001000
+#define KL3_I2S1_CLK18_ENABLE           0x00002000
+#define KL3_I2S0_CLK18_ENABLE           0x00004000
+#define KL3_VIA_CLK16_ENABLE            0x00008000      /* KL/Pangea only */
+#define KL3_IT_VIA_CLK32_ENABLE         0x00008000      /* Intrepid only */
+#define KL3_STOPPING33_ENABLED          0x00080000      /* KL Only */
+#define KL3_PG_PLL_ENABLE_TEST          0x00080000      /* Pangea Only */
+
+/* Intrepid USB bus 2, port 0,1 */
+#define KL3_IT_PORT_WAKEUP_ENABLE(p)            (0x00080000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_WAKE_EN(p)           (0x00040000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_WAKE_EN(p)          (0x00020000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p)       (0x00010000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_STAT(p)              (0x00300000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_STAT(p)             (0x00200000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_STAT(p)          (0x00100000 << ((p)<<3))
+
+/* Port 0,1 : bus 0, port 2,3 : bus 1 */
+#define KL4_PORT_WAKEUP_ENABLE(p)       (0x00000008 << ((p)<<3))
+#define KL4_PORT_RESUME_WAKE_EN(p)      (0x00000004 << ((p)<<3))
+#define KL4_PORT_CONNECT_WAKE_EN(p)     (0x00000002 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_WAKE_EN(p)  (0x00000001 << ((p)<<3))
+#define KL4_PORT_RESUME_STAT(p)         (0x00000040 << ((p)<<3))
+#define KL4_PORT_CONNECT_STAT(p)        (0x00000020 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_STAT(p)     (0x00000010 << ((p)<<3))
+
+/* Pangea and Intrepid only */
+#define KL5_VIA_USE_CLK31               0000000001      /* Pangea Only */
+#define KL5_SCC_USE_CLK31               0x00000002      /* Pangea Only */
+#define KL5_PWM_CLK32_EN                0x00000004
+#define KL5_CLK3_68_EN                  0x00000010
+#define KL5_CLK32_EN                    0x00000020
+
+
+/* K2 definitions */
+#define K2_FCR0_USB0_SWRESET            0x00200000
+#define K2_FCR0_USB1_SWRESET            0x02000000
+#define K2_FCR0_RING_PME_DISABLE        0x08000000
+
+#define K2_FCR1_PCI1_BUS_RESET_N        0x00000010
+#define K2_FCR1_PCI1_SLEEP_RESET_EN     0x00000020
+#define K2_FCR1_I2S0_CELL_ENABLE        0x00000400
+#define K2_FCR1_I2S0_RESET              0x00000800
+#define K2_FCR1_I2S0_CLK_ENABLE_BIT     0x00001000
+#define K2_FCR1_I2S0_ENABLE             0x00002000
+
+#define K2_FCR1_PCI1_CLK_ENABLE         0x00004000
+#define K2_FCR1_FW_CLK_ENABLE           0x00008000
+#define K2_FCR1_FW_RESET_N              0x00010000
+#define K2_FCR1_GMAC_CLK_ENABLE         0x00400000
+#define K2_FCR1_GMAC_POWER_DOWN         0x00800000
+#define K2_FCR1_GMAC_RESET_N            0x01000000
+#define K2_FCR1_SATA_CLK_ENABLE         0x02000000
+#define K2_FCR1_SATA_POWER_DOWN         0x04000000
+#define K2_FCR1_SATA_RESET_N            0x08000000
+#define K2_FCR1_UATA_CLK_ENABLE         0x10000000
+#define K2_FCR1_UATA_RESET_N            0x40000000
+#define K2_FCR1_UATA_CHOOSE_CLK66       0x80000000
+