mn10300: add the MN10300/AM33 architecture to the kernel

Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 136 insertions, 0 deletions

diff --git a/include/asm-mn10300/unit-asb2303/serial.h b/include/asm-mn10300/unit-asb2303/serial.h
new file mode 100644
index 000000000000..0d55cf5896ac
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2303/serial.h
@@ -0,0 +1,136 @@
+/* ASB2303-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS       0xA6FB0000
+#define SERIAL_PORT1_BASE_ADDRESS       0xA6FC0000
+
+#define SERIAL_IRQ      XIRQ0   /* Dual serial (PC16552)        (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS                                                \
+        {                                                               \
+        .baud_base              = BASE_BAUD,                            \
+        .irq                    = SERIAL_IRQ,                           \
+        .flags                  = STD_COM_FLAGS,                        \
+        .iomem_base             = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
+        .iomem_reg_shift        = 2,                                    \
+        .io_type                = SERIAL_IO_MEM,                        \
+        },                                                              \
+        {                                                               \
+        .baud_base              = BASE_BAUD,                            \
+        .irq                    = SERIAL_IRQ,                           \
+        .flags                  = STD_COM_FLAGS,                        \
+        .iomem_base             = (u8 *) SERIAL_PORT1_BASE_ADDRESS,     \
+        .iomem_reg_shift        = 2,                                    \
+        .io_type                = SERIAL_IO_MEM,                        \
+        },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define LSR_WAIT_FOR(STATE)                                     \
+do {                                                            \
+        while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {}     \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)                                  \
+do {                                                            \
+        while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {}      \
+} while (0)
+#define FLOWCTL_CLEAR(LINE)                     \
+do {                                            \
+        GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE)                       \
+do {                                            \
+        GDBPORT_SERIAL_MCR |= UART_MCR_##LINE;  \
+} while (0)
+#define FLOWCTL_QUERY(LINE)     ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+        char ch;
+
+        FLOWCTL_SET(DTR);
+
+        for (; n > 0; n--) {
+                LSR_WAIT_FOR(THRE);
+                FLOWCTL_WAIT_FOR(CTS);
+
+                ch = *p++;
+                if (ch == 0x0a) {
+                        GDBPORT_SERIAL_TX = 0x0d;
+                        LSR_WAIT_FOR(THRE);
+                        FLOWCTL_WAIT_FOR(CTS);
+                }
+                GDBPORT_SERIAL_TX = ch;
+        }
+
+        FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */