mn10300: add the MN10300/AM33 architecture to the kernel

Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 101 insertions, 0 deletions

diff --git a/include/asm-mn10300/dmactl-regs.h b/include/asm-mn10300/dmactl-regs.h
new file mode 100644
index 000000000000..58a199da0f4a
--- /dev/null
+++ b/include/asm-mn10300/dmactl-regs.h
@@ -0,0 +1,101 @@
+/* MN10300 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMACTL_REGS_H
+#define _ASM_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define DMxCTR(N)               __SYSREG(0xd2000000 + ((N) * 0x100), u32)       /* control reg */
+#define DMxCTR_BG               0x0000001f      /* transfer request source */
+#define DMxCTR_BG_SOFT          0x00000000      /* - software source */
+#define DMxCTR_BG_SC0TX         0x00000002      /* - serial port 0 transmission */
+#define DMxCTR_BG_SC0RX         0x00000003      /* - serial port 0 reception */
+#define DMxCTR_BG_SC1TX         0x00000004      /* - serial port 1 transmission */
+#define DMxCTR_BG_SC1RX         0x00000005      /* - serial port 1 reception */
+#define DMxCTR_BG_SC2TX         0x00000006      /* - serial port 2 transmission */
+#define DMxCTR_BG_SC2RX         0x00000007      /* - serial port 2 reception */
+#define DMxCTR_BG_TM0UFLOW      0x00000008      /* - timer 0 underflow */
+#define DMxCTR_BG_TM1UFLOW      0x00000009      /* - timer 1 underflow */
+#define DMxCTR_BG_TM2UFLOW      0x0000000a      /* - timer 2 underflow */
+#define DMxCTR_BG_TM3UFLOW      0x0000000b      /* - timer 3 underflow */
+#define DMxCTR_BG_TM6ACMPCAP    0x0000000c      /* - timer 6A compare/capture */
+#define DMxCTR_BG_AFE           0x0000000d      /* - analogue front-end interrupt source */
+#define DMxCTR_BG_ADC           0x0000000e      /* - A/D conversion end interrupt source */
+#define DMxCTR_BG_IRDA          0x0000000f      /* - IrDA interrupt source */
+#define DMxCTR_BG_RTC           0x00000010      /* - RTC interrupt source */
+#define DMxCTR_BG_XIRQ0         0x00000011      /* - XIRQ0 pin interrupt source */
+#define DMxCTR_BG_XIRQ1         0x00000012      /* - XIRQ1 pin interrupt source */
+#define DMxCTR_BG_XDMR0         0x00000013      /* - external request 0 source (XDMR0 pin) */
+#define DMxCTR_BG_XDMR1         0x00000014      /* - external request 1 source (XDMR1 pin) */
+#define DMxCTR_SAM              0x000000e0      /* DMA transfer src addr mode */
+#define DMxCTR_SAM_INCR         0x00000000      /* - increment */
+#define DMxCTR_SAM_DECR         0x00000020      /* - decrement */
+#define DMxCTR_SAM_FIXED        0x00000040      /* - fixed */
+#define DMxCTR_DAM              0x00000000      /* DMA transfer dest addr mode */
+#define DMxCTR_DAM_INCR         0x00000000      /* - increment */
+#define DMxCTR_DAM_DECR         0x00000100      /* - decrement */
+#define DMxCTR_DAM_FIXED        0x00000200      /* - fixed */
+#define DMxCTR_TM               0x00001800      /* DMA transfer mode */
+#define DMxCTR_TM_BATCH         0x00000000      /* - batch transfer */
+#define DMxCTR_TM_INTERM        0x00001000      /* - intermittent transfer */
+#define DMxCTR_UT               0x00006000      /* DMA transfer unit */
+#define DMxCTR_UT_1             0x00000000      /* - 1 byte */
+#define DMxCTR_UT_2             0x00002000      /* - 2 byte */
+#define DMxCTR_UT_4             0x00004000      /* - 4 byte */
+#define DMxCTR_UT_16            0x00006000      /* - 16 byte */
+#define DMxCTR_TEN              0x00010000      /* DMA channel transfer enable */
+#define DMxCTR_RQM              0x00060000      /* external request input source mode */
+#define DMxCTR_RQM_FALLEDGE     0x00000000      /* - falling edge */
+#define DMxCTR_RQM_RISEEDGE     0x00020000      /* - rising edge */
+#define DMxCTR_RQM_LOLEVEL      0x00040000      /* - low level */
+#define DMxCTR_RQM_HILEVEL      0x00060000      /* - high level */
+#define DMxCTR_RQF              0x01000000      /* DMA transfer request flag */
+#define DMxCTR_XEND             0x80000000      /* DMA transfer end flag */
+
+#define DMxSRC(N)               __SYSREG(0xd2000004 + ((N) * 0x100), u32)       /* control reg */
+
+#define DMxDST(N)               __SYSREG(0xd2000008 + ((N) * 0x100), u32)       /* src addr reg */
+
+#define DMxSIZ(N)               __SYSREG(0xd200000c + ((N) * 0x100), u32)       /* dest addr reg */
+#define DMxSIZ_CT               0x000fffff      /* number of bytes to transfer */
+
+#define DMxCYC(N)               __SYSREG(0xd2000010 + ((N) * 0x100), u32)       /* intermittent
+                                                                                 * size reg */
+#define DMxCYC_CYC              0x000000ff      /* number of interrmittent transfers -1 */
+
+#define DM0IRQ                  16              /* DMA channel 0 complete IRQ */
+#define DM1IRQ                  17              /* DMA channel 1 complete IRQ */
+#define DM2IRQ                  18              /* DMA channel 2 complete IRQ */
+#define DM3IRQ                  19              /* DMA channel 3 complete IRQ */
+
+#define DM0ICR                  GxICR(DM0IRQ)   /* DMA channel 0 complete intr ctrl reg */
+#define DM1ICR                  GxICR(DM0IR1)   /* DMA channel 1 complete intr ctrl reg */
+#define DM2ICR                  GxICR(DM0IR2)   /* DMA channel 2 complete intr ctrl reg */
+#define DM3ICR                  GxICR(DM0IR3)   /* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+        u32             ctr;
+        const void      *src;
+        void            *dst;
+        u32             siz;
+        u32             cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_DMACTL_REGS_H */