aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-mips/sn/ioc3.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/asm-mips/sn/ioc3.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/asm-mips/sn/ioc3.h')
-rw-r--r--include/asm-mips/sn/ioc3.h661
1 files changed, 661 insertions, 0 deletions
diff --git a/include/asm-mips/sn/ioc3.h b/include/asm-mips/sn/ioc3.h
new file mode 100644
index 000000000000..f7d530f306f2
--- /dev/null
+++ b/include/asm-mips/sn/ioc3.h
@@ -0,0 +1,661 @@
1/*
2 * Copyright (C) 1999, 2000 Ralf Baechle
3 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
4 */
5#ifndef _IOC3_H
6#define _IOC3_H
7
8/* SUPERIO uart register map */
9typedef volatile struct ioc3_uartregs {
10 union {
11 volatile u8 rbr; /* read only, DLAB == 0 */
12 volatile u8 thr; /* write only, DLAB == 0 */
13 volatile u8 dll; /* DLAB == 1 */
14 } u1;
15 union {
16 volatile u8 ier; /* DLAB == 0 */
17 volatile u8 dlm; /* DLAB == 1 */
18 } u2;
19 union {
20 volatile u8 iir; /* read only */
21 volatile u8 fcr; /* write only */
22 } u3;
23 volatile u8 iu_lcr;
24 volatile u8 iu_mcr;
25 volatile u8 iu_lsr;
26 volatile u8 iu_msr;
27 volatile u8 iu_scr;
28} ioc3_uregs_t;
29
30#define iu_rbr u1.rbr
31#define iu_thr u1.thr
32#define iu_dll u1.dll
33#define iu_ier u2.ier
34#define iu_dlm u2.dlm
35#define iu_iir u3.iir
36#define iu_fcr u3.fcr
37
38struct ioc3_sioregs {
39 volatile u8 fill[0x141]; /* starts at 0x141 */
40
41 volatile u8 uartc;
42 volatile u8 kbdcg;
43
44 volatile u8 fill0[0x150 - 0x142 - 1];
45
46 volatile u8 pp_data;
47 volatile u8 pp_dsr;
48 volatile u8 pp_dcr;
49
50 volatile u8 fill1[0x158 - 0x152 - 1];
51
52 volatile u8 pp_fifa;
53 volatile u8 pp_cfgb;
54 volatile u8 pp_ecr;
55
56 volatile u8 fill2[0x168 - 0x15a - 1];
57
58 volatile u8 rtcad;
59 volatile u8 rtcdat;
60
61 volatile u8 fill3[0x170 - 0x169 - 1];
62
63 struct ioc3_uartregs uartb; /* 0x20170 */
64 struct ioc3_uartregs uarta; /* 0x20178 */
65};
66
67/* Register layout of IOC3 in configuration space. */
68struct ioc3 {
69 volatile u32 pad0[7]; /* 0x00000 */
70 volatile u32 sio_ir; /* 0x0001c */
71 volatile u32 sio_ies; /* 0x00020 */
72 volatile u32 sio_iec; /* 0x00024 */
73 volatile u32 sio_cr; /* 0x00028 */
74 volatile u32 int_out; /* 0x0002c */
75 volatile u32 mcr; /* 0x00030 */
76
77 /* General Purpose I/O registers */
78 volatile u32 gpcr_s; /* 0x00034 */
79 volatile u32 gpcr_c; /* 0x00038 */
80 volatile u32 gpdr; /* 0x0003c */
81 volatile u32 gppr_0; /* 0x00040 */
82 volatile u32 gppr_1; /* 0x00044 */
83 volatile u32 gppr_2; /* 0x00048 */
84 volatile u32 gppr_3; /* 0x0004c */
85 volatile u32 gppr_4; /* 0x00050 */
86 volatile u32 gppr_5; /* 0x00054 */
87 volatile u32 gppr_6; /* 0x00058 */
88 volatile u32 gppr_7; /* 0x0005c */
89 volatile u32 gppr_8; /* 0x00060 */
90 volatile u32 gppr_9; /* 0x00064 */
91 volatile u32 gppr_10; /* 0x00068 */
92 volatile u32 gppr_11; /* 0x0006c */
93 volatile u32 gppr_12; /* 0x00070 */
94 volatile u32 gppr_13; /* 0x00074 */
95 volatile u32 gppr_14; /* 0x00078 */
96 volatile u32 gppr_15; /* 0x0007c */
97
98 /* Parallel Port Registers */
99 volatile u32 ppbr_h_a; /* 0x00080 */
100 volatile u32 ppbr_l_a; /* 0x00084 */
101 volatile u32 ppcr_a; /* 0x00088 */
102 volatile u32 ppcr; /* 0x0008c */
103 volatile u32 ppbr_h_b; /* 0x00090 */
104 volatile u32 ppbr_l_b; /* 0x00094 */
105 volatile u32 ppcr_b; /* 0x00098 */
106
107 /* Keyboard and Mouse Registers */
108 volatile u32 km_csr; /* 0x0009c */
109 volatile u32 k_rd; /* 0x000a0 */
110 volatile u32 m_rd; /* 0x000a4 */
111 volatile u32 k_wd; /* 0x000a8 */
112 volatile u32 m_wd; /* 0x000ac */
113
114 /* Serial Port Registers */
115 volatile u32 sbbr_h; /* 0x000b0 */
116 volatile u32 sbbr_l; /* 0x000b4 */
117 volatile u32 sscr_a; /* 0x000b8 */
118 volatile u32 stpir_a; /* 0x000bc */
119 volatile u32 stcir_a; /* 0x000c0 */
120 volatile u32 srpir_a; /* 0x000c4 */
121 volatile u32 srcir_a; /* 0x000c8 */
122 volatile u32 srtr_a; /* 0x000cc */
123 volatile u32 shadow_a; /* 0x000d0 */
124 volatile u32 sscr_b; /* 0x000d4 */
125 volatile u32 stpir_b; /* 0x000d8 */
126 volatile u32 stcir_b; /* 0x000dc */
127 volatile u32 srpir_b; /* 0x000e0 */
128 volatile u32 srcir_b; /* 0x000e4 */
129 volatile u32 srtr_b; /* 0x000e8 */
130 volatile u32 shadow_b; /* 0x000ec */
131
132 /* Ethernet Registers */
133 volatile u32 emcr; /* 0x000f0 */
134 volatile u32 eisr; /* 0x000f4 */
135 volatile u32 eier; /* 0x000f8 */
136 volatile u32 ercsr; /* 0x000fc */
137 volatile u32 erbr_h; /* 0x00100 */
138 volatile u32 erbr_l; /* 0x00104 */
139 volatile u32 erbar; /* 0x00108 */
140 volatile u32 ercir; /* 0x0010c */
141 volatile u32 erpir; /* 0x00110 */
142 volatile u32 ertr; /* 0x00114 */
143 volatile u32 etcsr; /* 0x00118 */
144 volatile u32 ersr; /* 0x0011c */
145 volatile u32 etcdc; /* 0x00120 */
146 volatile u32 ebir; /* 0x00124 */
147 volatile u32 etbr_h; /* 0x00128 */
148 volatile u32 etbr_l; /* 0x0012c */
149 volatile u32 etcir; /* 0x00130 */
150 volatile u32 etpir; /* 0x00134 */
151 volatile u32 emar_h; /* 0x00138 */
152 volatile u32 emar_l; /* 0x0013c */
153 volatile u32 ehar_h; /* 0x00140 */
154 volatile u32 ehar_l; /* 0x00144 */
155 volatile u32 micr; /* 0x00148 */
156 volatile u32 midr_r; /* 0x0014c */
157 volatile u32 midr_w; /* 0x00150 */
158 volatile u32 pad1[(0x20000 - 0x00154) / 4];
159
160 /* SuperIO Registers XXX */
161 struct ioc3_sioregs sregs; /* 0x20000 */
162 volatile u32 pad2[(0x40000 - 0x20180) / 4];
163
164 /* SSRAM Diagnostic Access */
165 volatile u32 ssram[(0x80000 - 0x40000) / 4];
166
167 /* Bytebus device offsets
168 0x80000 - Access to the generic devices selected with DEV0
169 0x9FFFF bytebus DEV_SEL_0
170 0xA0000 - Access to the generic devices selected with DEV1
171 0xBFFFF bytebus DEV_SEL_1
172 0xC0000 - Access to the generic devices selected with DEV2
173 0xDFFFF bytebus DEV_SEL_2
174 0xE0000 - Access to the generic devices selected with DEV3
175 0xFFFFF bytebus DEV_SEL_3 */
176};
177
178/*
179 * Ethernet RX Buffer
180 */
181struct ioc3_erxbuf {
182 u32 w0; /* first word (valid,bcnt,cksum) */
183 u32 err; /* second word various errors */
184 /* next comes n bytes of padding */
185 /* then the received ethernet frame itself */
186};
187
188#define ERXBUF_IPCKSUM_MASK 0x0000ffff
189#define ERXBUF_BYTECNT_MASK 0x07ff0000
190#define ERXBUF_BYTECNT_SHIFT 16
191#define ERXBUF_V 0x80000000
192
193#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */
194#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */
195#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */
196#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */
197#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */
198#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */
199#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */
200#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */
201#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */
202#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */
203#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */
204#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */
205
206/*
207 * Ethernet TX Descriptor
208 */
209#define ETXD_DATALEN 104
210struct ioc3_etxd {
211 u32 cmd; /* command field */
212 u32 bufcnt; /* buffer counts field */
213 u64 p1; /* buffer pointer 1 */
214 u64 p2; /* buffer pointer 2 */
215 u8 data[ETXD_DATALEN]; /* opt. tx data */
216};
217
218#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */
219#define ETXD_INTWHENDONE 0x00001000 /* intr when done */
220#define ETXD_D0V 0x00010000 /* data 0 valid */
221#define ETXD_B1V 0x00020000 /* buf 1 valid */
222#define ETXD_B2V 0x00040000 /* buf 2 valid */
223#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */
224#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */
225#define ETXD_CHKOFF_SHIFT 20
226
227#define ETXD_D0CNT_MASK 0x0000007f
228#define ETXD_B1CNT_MASK 0x0007ff00
229#define ETXD_B1CNT_SHIFT 8
230#define ETXD_B2CNT_MASK 0x7ff00000
231#define ETXD_B2CNT_SHIFT 20
232
233/*
234 * Bytebus device space
235 */
236#define IOC3_BYTEBUS_DEV0 0x80000L
237#define IOC3_BYTEBUS_DEV1 0xa0000L
238#define IOC3_BYTEBUS_DEV2 0xc0000L
239#define IOC3_BYTEBUS_DEV3 0xe0000L
240
241/* ------------------------------------------------------------------------- */
242
243/* Superio Registers (PIO Access) */
244#define IOC3_SIO_BASE 0x20000
245#define IOC3_SIO_UARTC (IOC3_SIO_BASE+0x141) /* UART Config */
246#define IOC3_SIO_KBDCG (IOC3_SIO_BASE+0x142) /* KBD Config */
247#define IOC3_SIO_PP_BASE (IOC3_SIO_BASE+PP_BASE) /* Parallel Port */
248#define IOC3_SIO_RTC_BASE (IOC3_SIO_BASE+0x168) /* Real Time Clock */
249#define IOC3_SIO_UB_BASE (IOC3_SIO_BASE+UARTB_BASE) /* UART B */
250#define IOC3_SIO_UA_BASE (IOC3_SIO_BASE+UARTA_BASE) /* UART A */
251
252/* SSRAM Diagnostic Access */
253#define IOC3_SSRAM IOC3_RAM_OFF /* base of SSRAM diagnostic access */
254#define IOC3_SSRAM_LEN 0x40000 /* 256kb (address space size, may not be fully populated) */
255#define IOC3_SSRAM_DM 0x0000ffff /* data mask */
256#define IOC3_SSRAM_PM 0x00010000 /* parity mask */
257
258/* bitmasks for PCI_SCR */
259#define PCI_SCR_PAR_RESP_EN 0x00000040 /* enb PCI parity checking */
260#define PCI_SCR_SERR_EN 0x00000100 /* enable the SERR# driver */
261#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */
262#define PCI_SCR_RX_SERR (0x1 << 16)
263#define PCI_SCR_DROP_MODE (0x1 << 17)
264#define PCI_SCR_SIG_PAR_ERR (0x1 << 24)
265#define PCI_SCR_SIG_TAR_ABRT (0x1 << 27)
266#define PCI_SCR_RX_TAR_ABRT (0x1 << 28)
267#define PCI_SCR_SIG_MST_ABRT (0x1 << 29)
268#define PCI_SCR_SIG_SERR (0x1 << 30)
269#define PCI_SCR_PAR_ERR (0x1 << 31)
270
271/* bitmasks for IOC3_KM_CSR */
272#define KM_CSR_K_WRT_PEND 0x00000001 /* kbd port xmitting or resetting */
273#define KM_CSR_M_WRT_PEND 0x00000002 /* mouse port xmitting or resetting */
274#define KM_CSR_K_LCB 0x00000004 /* Line Cntrl Bit for last KBD write */
275#define KM_CSR_M_LCB 0x00000008 /* same for mouse */
276#define KM_CSR_K_DATA 0x00000010 /* state of kbd data line */
277#define KM_CSR_K_CLK 0x00000020 /* state of kbd clock line */
278#define KM_CSR_K_PULL_DATA 0x00000040 /* pull kbd data line low */
279#define KM_CSR_K_PULL_CLK 0x00000080 /* pull kbd clock line low */
280#define KM_CSR_M_DATA 0x00000100 /* state of ms data line */
281#define KM_CSR_M_CLK 0x00000200 /* state of ms clock line */
282#define KM_CSR_M_PULL_DATA 0x00000400 /* pull ms data line low */
283#define KM_CSR_M_PULL_CLK 0x00000800 /* pull ms clock line low */
284#define KM_CSR_EMM_MODE 0x00001000 /* emulation mode */
285#define KM_CSR_SIM_MODE 0x00002000 /* clock X8 */
286#define KM_CSR_K_SM_IDLE 0x00004000 /* Keyboard is idle */
287#define KM_CSR_M_SM_IDLE 0x00008000 /* Mouse is idle */
288#define KM_CSR_K_TO 0x00010000 /* Keyboard trying to send/receive */
289#define KM_CSR_M_TO 0x00020000 /* Mouse trying to send/receive */
290#define KM_CSR_K_TO_EN 0x00040000 /* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause
291 SIO_IR to assert */
292#define KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause
293 SIO_IR to assert */
294#define KM_CSR_K_CLAMP_ONE 0x00100000 /* Pull K_CLK low after rec. one char */
295#define KM_CSR_M_CLAMP_ONE 0x00200000 /* Pull M_CLK low after rec. one char */
296#define KM_CSR_K_CLAMP_THREE 0x00400000 /* Pull K_CLK low after rec. three chars */
297#define KM_CSR_M_CLAMP_THREE 0x00800000 /* Pull M_CLK low after rec. three char */
298
299/* bitmasks for IOC3_K_RD and IOC3_M_RD */
300#define KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */
301#define KM_RD_DATA_2_SHIFT 0
302#define KM_RD_DATA_1 0x0000ff00 /* 2nd char recvd since last read */
303#define KM_RD_DATA_1_SHIFT 8
304#define KM_RD_DATA_0 0x00ff0000 /* 1st char recvd since last read */
305#define KM_RD_DATA_0_SHIFT 16
306#define KM_RD_FRAME_ERR_2 0x01000000 /* framing or parity error in byte 2 */
307#define KM_RD_FRAME_ERR_1 0x02000000 /* same for byte 1 */
308#define KM_RD_FRAME_ERR_0 0x04000000 /* same for byte 0 */
309
310#define KM_RD_KBD_MSE 0x08000000 /* 0 if from kbd, 1 if from mouse */
311#define KM_RD_OFLO 0x10000000 /* 4th char recvd before this read */
312#define KM_RD_VALID_2 0x20000000 /* DATA_2 valid */
313#define KM_RD_VALID_1 0x40000000 /* DATA_1 valid */
314#define KM_RD_VALID_0 0x80000000 /* DATA_0 valid */
315#define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2)
316
317/* bitmasks for IOC3_K_WD & IOC3_M_WD */
318#define KM_WD_WRT_DATA 0x000000ff /* write to keyboard/mouse port */
319#define KM_WD_WRT_DATA_SHIFT 0
320
321/* bitmasks for serial RX status byte */
322#define RXSB_OVERRUN 0x01 /* char(s) lost */
323#define RXSB_PAR_ERR 0x02 /* parity error */
324#define RXSB_FRAME_ERR 0x04 /* framing error */
325#define RXSB_BREAK 0x08 /* break character */
326#define RXSB_CTS 0x10 /* state of CTS */
327#define RXSB_DCD 0x20 /* state of DCD */
328#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */
329#define RXSB_DATA_VALID 0x80 /* data byte, FRAME_ERR PAR_ERR & BREAK valid */
330
331/* bitmasks for serial TX control byte */
332#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */
333#define TXCB_INVALID 0x00 /* byte is invalid */
334#define TXCB_VALID 0x40 /* byte is valid */
335#define TXCB_MCR 0x80 /* data<7:0> to modem control register */
336#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */
337
338/* bitmasks for IOC3_SBBR_L */
339#define SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */
340#define SBBR_L_BASE 0xfffff000 /* lower serial ring base addr */
341
342/* bitmasks for IOC3_SSCR_<A:B> */
343#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */
344#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
345#define SSCR_HFC_EN 0x00020000 /* hardware flow control enabled */
346#define SSCR_RX_RING_DCD 0x00040000 /* post RX record on delta-DCD */
347#define SSCR_RX_RING_CTS 0x00080000 /* post RX record on delta-CTS */
348#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */
349#define SSCR_DIAG 0x00200000 /* bypass clock divider for sim */
350#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */
351#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */
352#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */
353#define SSCR_PAUSE_STATE 0x40000000 /* sets when PAUSE takes effect */
354#define SSCR_RESET 0x80000000 /* reset DMA channels */
355
356/* all producer/comsumer pointers are the same bitfield */
357#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */
358#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */
359#define PROD_CONS_PTR_OFF 3
360
361/* bitmasks for IOC3_SRCIR_<A:B> */
362#define SRCIR_ARM 0x80000000 /* arm RX timer */
363
364/* bitmasks for IOC3_SRPIR_<A:B> */
365#define SRPIR_BYTE_CNT 0x07000000 /* bytes in packer */
366#define SRPIR_BYTE_CNT_SHIFT 24
367
368/* bitmasks for IOC3_STCIR_<A:B> */
369#define STCIR_BYTE_CNT 0x0f000000 /* bytes in unpacker */
370#define STCIR_BYTE_CNT_SHIFT 24
371
372/* bitmasks for IOC3_SHADOW_<A:B> */
373#define SHADOW_DR 0x00000001 /* data ready */
374#define SHADOW_OE 0x00000002 /* overrun error */
375#define SHADOW_PE 0x00000004 /* parity error */
376#define SHADOW_FE 0x00000008 /* framing error */
377#define SHADOW_BI 0x00000010 /* break interrupt */
378#define SHADOW_THRE 0x00000020 /* transmit holding register empty */
379#define SHADOW_TEMT 0x00000040 /* transmit shift register empty */
380#define SHADOW_RFCE 0x00000080 /* char in RX fifo has an error */
381#define SHADOW_DCTS 0x00010000 /* delta clear to send */
382#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */
383#define SHADOW_CTS 0x00100000 /* clear to send */
384#define SHADOW_DCD 0x00800000 /* data carrier detect */
385#define SHADOW_DTR 0x01000000 /* data terminal ready */
386#define SHADOW_RTS 0x02000000 /* request to send */
387#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
388#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
389#define SHADOW_LOOP 0x10000000 /* loopback enabled */
390
391/* bitmasks for IOC3_SRTR_<A:B> */
392#define SRTR_CNT 0x00000fff /* reload value for RX timer */
393#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */
394#define SRTR_CNT_VAL_SHIFT 16
395#define SRTR_HZ 16000 /* SRTR clock frequency */
396
397/* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES */
398#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */
399#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */
400#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */
401#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */
402#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */
403#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */
404#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */
405#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */
406#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */
407#define SIO_IR_SB_TX_MT 0x00000200 /* */
408#define SIO_IR_SB_RX_FULL 0x00000400 /* */
409#define SIO_IR_SB_RX_HIGH 0x00000800 /* */
410#define SIO_IR_SB_RX_TIMER 0x00001000 /* */
411#define SIO_IR_SB_DELTA_DCD 0x00002000 /* */
412#define SIO_IR_SB_DELTA_CTS 0x00004000 /* */
413#define SIO_IR_SB_INT 0x00008000 /* */
414#define SIO_IR_SB_TX_EXPLICIT 0x00010000 /* */
415#define SIO_IR_SB_MEMERR 0x00020000 /* */
416#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */
417#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */
418#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */
419#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */
420#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */
421#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */
422#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */
423#define SIO_IR_GEN_INT_SHIFT 28
424
425/* per device interrupt masks */
426#define SIO_IR_SA (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \
427 SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \
428 SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \
429 SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \
430 SIO_IR_SA_MEMERR)
431#define SIO_IR_SB (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \
432 SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \
433 SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \
434 SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \
435 SIO_IR_SB_MEMERR)
436#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \
437 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
438#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1)
439
440/* macro to load pending interrupts */
441#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \
442 PCI_INW(&((mem)->sio_ies_ro)))
443
444/* bitmasks for SIO_CR */
445#define SIO_CR_SIO_RESET 0x00000001 /* reset the SIO */
446#define SIO_CR_SER_A_BASE 0x000000fe /* DMA poll addr port A */
447#define SIO_CR_SER_A_BASE_SHIFT 1
448#define SIO_CR_SER_B_BASE 0x00007f00 /* DMA poll addr port B */
449#define SIO_CR_SER_B_BASE_SHIFT 8
450#define SIO_SR_CMD_PULSE 0x00078000 /* byte bus strobe length */
451#define SIO_CR_CMD_PULSE_SHIFT 15
452#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */
453#define SIO_CR_ARB_DIAG_TXA 0x00000000
454#define SIO_CR_ARB_DIAG_RXA 0x00080000
455#define SIO_CR_ARB_DIAG_TXB 0x00100000
456#define SIO_CR_ARB_DIAG_RXB 0x00180000
457#define SIO_CR_ARB_DIAG_PP 0x00200000
458#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */
459
460/* bitmasks for INT_OUT */
461#define INT_OUT_COUNT 0x0000ffff /* pulse interval timer */
462#define INT_OUT_MODE 0x00070000 /* mode mask */
463#define INT_OUT_MODE_0 0x00000000 /* set output to 0 */
464#define INT_OUT_MODE_1 0x00040000 /* set output to 1 */
465#define INT_OUT_MODE_1PULSE 0x00050000 /* send 1 pulse */
466#define INT_OUT_MODE_PULSES 0x00060000 /* send 1 pulse every interval */
467#define INT_OUT_MODE_SQW 0x00070000 /* toggle output every interval */
468#define INT_OUT_DIAG 0x40000000 /* diag mode */
469#define INT_OUT_INT_OUT 0x80000000 /* current state of INT_OUT */
470
471/* time constants for INT_OUT */
472#define INT_OUT_NS_PER_TICK (30 * 260) /* 30 ns PCI clock, divisor=260 */
473#define INT_OUT_TICKS_PER_PULSE 3 /* outgoing pulse lasts 3 ticks */
474#define INT_OUT_US_TO_COUNT(x) /* convert uS to a count value */ \
475 (((x) * 10 + INT_OUT_NS_PER_TICK / 200) * \
476 100 / INT_OUT_NS_PER_TICK - 1)
477#define INT_OUT_COUNT_TO_US(x) /* convert count value to uS */ \
478 (((x) + 1) * INT_OUT_NS_PER_TICK / 1000)
479#define INT_OUT_MIN_TICKS 3 /* min period is width of pulse in "ticks" */
480#define INT_OUT_MAX_TICKS INT_OUT_COUNT /* largest possible count */
481
482/* bitmasks for GPCR */
483#define GPCR_DIR 0x000000ff /* tristate pin input or output */
484#define GPCR_DIR_PIN(x) (1<<(x)) /* access one of the DIR bits */
485#define GPCR_EDGE 0x000f0000 /* extint edge or level sensitive */
486#define GPCR_EDGE_PIN(x) (1<<((x)+15)) /* access one of the EDGE bits */
487
488/* values for GPCR */
489#define GPCR_INT_OUT_EN 0x00100000 /* enable INT_OUT to pin 0 */
490#define GPCR_MLAN_EN 0x00200000 /* enable MCR to pin 8 */
491#define GPCR_DIR_SERA_XCVR 0x00000080 /* Port A Transceiver select enable */
492#define GPCR_DIR_SERB_XCVR 0x00000040 /* Port B Transceiver select enable */
493#define GPCR_DIR_PHY_RST 0x00000020 /* ethernet PHY reset enable */
494
495/* defs for some of the generic I/O pins */
496#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */
497#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */
498#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */
499
500#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */
501#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin controlling uart b mode select */
502#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin controlling uart a mode select */
503
504#define EMCR_DUPLEX 0x00000001
505#define EMCR_PROMISC 0x00000002
506#define EMCR_PADEN 0x00000004
507#define EMCR_RXOFF_MASK 0x000001f8
508#define EMCR_RXOFF_SHIFT 3
509#define EMCR_RAMPAR 0x00000200
510#define EMCR_BADPAR 0x00000800
511#define EMCR_BUFSIZ 0x00001000
512#define EMCR_TXDMAEN 0x00002000
513#define EMCR_TXEN 0x00004000
514#define EMCR_RXDMAEN 0x00008000
515#define EMCR_RXEN 0x00010000
516#define EMCR_LOOPBACK 0x00020000
517#define EMCR_ARB_DIAG 0x001c0000
518#define EMCR_ARB_DIAG_IDLE 0x00200000
519#define EMCR_RST 0x80000000
520
521#define EISR_RXTIMERINT 0x00000001
522#define EISR_RXTHRESHINT 0x00000002
523#define EISR_RXOFLO 0x00000004
524#define EISR_RXBUFOFLO 0x00000008
525#define EISR_RXMEMERR 0x00000010
526#define EISR_RXPARERR 0x00000020
527#define EISR_TXEMPTY 0x00010000
528#define EISR_TXRTRY 0x00020000
529#define EISR_TXEXDEF 0x00040000
530#define EISR_TXLCOL 0x00080000
531#define EISR_TXGIANT 0x00100000
532#define EISR_TXBUFUFLO 0x00200000
533#define EISR_TXEXPLICIT 0x00400000
534#define EISR_TXCOLLWRAP 0x00800000
535#define EISR_TXDEFERWRAP 0x01000000
536#define EISR_TXMEMERR 0x02000000
537#define EISR_TXPARERR 0x04000000
538
539#define ERCSR_THRESH_MASK 0x000001ff /* enet RX threshold */
540#define ERCSR_RX_TMR 0x40000000 /* simulation only */
541#define ERCSR_DIAG_OFLO 0x80000000 /* simulation only */
542
543#define ERBR_ALIGNMENT 4096
544#define ERBR_L_RXRINGBASE_MASK 0xfffff000
545
546#define ERBAR_BARRIER_BIT 0x0100
547#define ERBAR_RXBARR_MASK 0xffff0000
548#define ERBAR_RXBARR_SHIFT 16
549
550#define ERCIR_RXCONSUME_MASK 0x00000fff
551
552#define ERPIR_RXPRODUCE_MASK 0x00000fff
553#define ERPIR_ARM 0x80000000
554
555#define ERTR_CNT_MASK 0x000007ff
556
557#define ETCSR_IPGT_MASK 0x0000007f
558#define ETCSR_IPGR1_MASK 0x00007f00
559#define ETCSR_IPGR1_SHIFT 8
560#define ETCSR_IPGR2_MASK 0x007f0000
561#define ETCSR_IPGR2_SHIFT 16
562#define ETCSR_NOTXCLK 0x80000000
563
564#define ETCDC_COLLCNT_MASK 0x0000ffff
565#define ETCDC_DEFERCNT_MASK 0xffff0000
566#define ETCDC_DEFERCNT_SHIFT 16
567
568#define ETBR_ALIGNMENT (64*1024)
569#define ETBR_L_RINGSZ_MASK 0x00000001
570#define ETBR_L_RINGSZ128 0
571#define ETBR_L_RINGSZ512 1
572#define ETBR_L_TXRINGBASE_MASK 0xffffc000
573
574#define ETCIR_TXCONSUME_MASK 0x0000ffff
575#define ETCIR_IDLE 0x80000000
576
577#define ETPIR_TXPRODUCE_MASK 0x0000ffff
578
579#define EBIR_TXBUFPROD_MASK 0x0000001f
580#define EBIR_TXBUFCONS_MASK 0x00001f00
581#define EBIR_TXBUFCONS_SHIFT 8
582#define EBIR_RXBUFPROD_MASK 0x007fc000
583#define EBIR_RXBUFPROD_SHIFT 14
584#define EBIR_RXBUFCONS_MASK 0xff800000
585#define EBIR_RXBUFCONS_SHIFT 23
586
587#define MICR_REGADDR_MASK 0x0000001f
588#define MICR_PHYADDR_MASK 0x000003e0
589#define MICR_PHYADDR_SHIFT 5
590#define MICR_READTRIG 0x00000400
591#define MICR_BUSY 0x00000800
592
593#define MIDR_DATA_MASK 0x0000ffff
594
595#define ERXBUF_IPCKSUM_MASK 0x0000ffff
596#define ERXBUF_BYTECNT_MASK 0x07ff0000
597#define ERXBUF_BYTECNT_SHIFT 16
598#define ERXBUF_V 0x80000000
599
600#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */
601#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */
602#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */
603#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */
604#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */
605#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */
606#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */
607#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */
608#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */
609#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */
610#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */
611#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */
612
613#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */
614#define ETXD_INTWHENDONE 0x00001000 /* intr when done */
615#define ETXD_D0V 0x00010000 /* data 0 valid */
616#define ETXD_B1V 0x00020000 /* buf 1 valid */
617#define ETXD_B2V 0x00040000 /* buf 2 valid */
618#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */
619#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */
620#define ETXD_CHKOFF_SHIFT 20
621
622#define ETXD_D0CNT_MASK 0x0000007f
623#define ETXD_B1CNT_MASK 0x0007ff00
624#define ETXD_B1CNT_SHIFT 8
625#define ETXD_B2CNT_MASK 0x7ff00000
626#define ETXD_B2CNT_SHIFT 20
627
628typedef enum ioc3_subdevs_e {
629 ioc3_subdev_ether,
630 ioc3_subdev_generic,
631 ioc3_subdev_nic,
632 ioc3_subdev_kbms,
633 ioc3_subdev_ttya,
634 ioc3_subdev_ttyb,
635 ioc3_subdev_ecpp,
636 ioc3_subdev_rt,
637 ioc3_nsubdevs
638} ioc3_subdev_t;
639
640/* subdevice disable bits,
641 * from the standard INFO_LBL_SUBDEVS
642 */
643#define IOC3_SDB_ETHER (1<<ioc3_subdev_ether)
644#define IOC3_SDB_GENERIC (1<<ioc3_subdev_generic)
645#define IOC3_SDB_NIC (1<<ioc3_subdev_nic)
646#define IOC3_SDB_KBMS (1<<ioc3_subdev_kbms)
647#define IOC3_SDB_TTYA (1<<ioc3_subdev_ttya)
648#define IOC3_SDB_TTYB (1<<ioc3_subdev_ttyb)
649#define IOC3_SDB_ECPP (1<<ioc3_subdev_ecpp)
650#define IOC3_SDB_RT (1<<ioc3_subdev_rt)
651
652#define IOC3_ALL_SUBDEVS ((1<<ioc3_nsubdevs)-1)
653
654#define IOC3_SDB_SERIAL (IOC3_SDB_TTYA|IOC3_SDB_TTYB)
655
656#define IOC3_STD_SUBDEVS IOC3_ALL_SUBDEVS
657
658#define IOC3_INTA_SUBDEVS IOC3_SDB_ETHER
659#define IOC3_INTB_SUBDEVS (IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT)
660
661#endif /* _IOC3_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-13 11:16:14 -0500