Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 231 insertions, 0 deletions

diff --git a/include/asm-mips/sgi/mc.h b/include/asm-mips/sgi/mc.h
new file mode 100644
index 000000000000..fd98f930607c
--- /dev/null
+++ b/include/asm-mips/sgi/mc.h
@@ -0,0 +1,231 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * mc.h: Definitions for SGI Memory Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+
+#ifndef _SGI_MC_H
+#define _SGI_MC_H
+
+struct sgimc_regs {
+        u32 _unused0;
+        volatile u32 cpuctrl0;  /* CPU control register 0, readwrite */
+#define SGIMC_CCTRL0_REFS       0x0000000f /* REFS mask */
+#define SGIMC_CCTRL0_EREFRESH   0x00000010 /* Memory refresh enable */
+#define SGIMC_CCTRL0_EPERRGIO   0x00000020 /* GIO parity error enable */
+#define SGIMC_CCTRL0_EPERRMEM   0x00000040 /* Main mem parity error enable */
+#define SGIMC_CCTRL0_EPERRCPU   0x00000080 /* CPU bus parity error enable */
+#define SGIMC_CCTRL0_WDOG       0x00000100 /* Watchdog timer enable */
+#define SGIMC_CCTRL0_SYSINIT    0x00000200 /* System init bit */
+#define SGIMC_CCTRL0_GFXRESET   0x00000400 /* Graphics interface reset */
+#define SGIMC_CCTRL0_EISALOCK   0x00000800 /* Lock CPU from memory for EISA */
+#define SGIMC_CCTRL0_EPERRSCMD  0x00001000 /* SysCMD bus parity error enable */
+#define SGIMC_CCTRL0_IENAB      0x00002000 /* Allow interrupts from MC */
+#define SGIMC_CCTRL0_ESNOOP     0x00004000 /* Snooping I/O enable */
+#define SGIMC_CCTRL0_EPROMWR    0x00008000 /* Prom writes from cpu enable */
+#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */
+#define SGIMC_CCTRL0_LENDIAN    0x00020000 /* Put MC in little-endian mode */
+#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */
+#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */
+#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
+#define SGIMC_CCTRL0_GIOBTOB    0x08000000 /* Allow GIO back to back writes */
+        u32 _unused1;
+        volatile u32 cpuctrl1;  /* CPU control register 1, readwrite */
+#define SGIMC_CCTRL1_EGIOTIMEO  0x00000010 /* GIO bus timeout enable */
+#define SGIMC_CCTRL1_FIXEDEHPC  0x00001000 /* Fixed HPC endianness */
+#define SGIMC_CCTRL1_LITTLEHPC  0x00002000 /* Little endian HPC */
+#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */
+#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */
+
+        u32 _unused2;
+        volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */
+
+        u32 _unused3;
+        volatile u32 systemid;  /* MC system ID register, readonly */
+#define SGIMC_SYSID_MASKREV     0x0000000f /* Revision of MC controller */
+#define SGIMC_SYSID_EPRESENT    0x00000010 /* Indicates presence of EISA bus */
+
+        u32 _unused4[3];
+        volatile u32 divider;   /* Divider reg for RPSS */
+
+        u32 _unused5;
+        volatile u32 eeprom;    /* EEPROM byte reg for r4k */
+#define SGIMC_EEPROM_PRE        0x00000001 /* eeprom chip PRE pin assertion */
+#define SGIMC_EEPROM_CSEL       0x00000002 /* Active high, eeprom chip select */
+#define SGIMC_EEPROM_SECLOCK    0x00000004 /* EEPROM serial clock */
+#define SGIMC_EEPROM_SDATAO     0x00000008 /* Serial EEPROM data-out */
+#define SGIMC_EEPROM_SDATAI     0x00000010 /* Serial EEPROM data-in */
+
+        u32 _unused6[3];
+        volatile u32 rcntpre;   /* Preload refresh counter */
+
+        u32 _unused7;
+        volatile u32 rcounter;  /* Readonly refresh counter */
+
+        u32 _unused8[13];
+        volatile u32 giopar;    /* Parameter word for GIO64 */
+#define SGIMC_GIOPAR_HPC64      0x00000001 /* HPC talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_GFX64      0x00000002 /* GFX talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_EXP064     0x00000004 /* EXP(slot0) talks using 64-bits */
+#define SGIMC_GIOPAR_EXP164     0x00000008 /* EXP(slot1) talks using 64-bits */
+#define SGIMC_GIOPAR_EISA64     0x00000010 /* EISA bus talks 64-bits to GIO */
+#define SGIMC_GIOPAR_HPC264     0x00000020 /* 2nd HPX talks 64-bits to GIO */
+#define SGIMC_GIOPAR_RTIMEGFX   0x00000040 /* GFX device has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP0  0x00000080 /* EXP(slot0) has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP1  0x00000100 /* EXP(slot1) has realtime attr */
+#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */
+#define SGIMC_GIOPAR_ONEBUS     0x00000400 /* Exists one GIO64 pipelined bus */
+#define SGIMC_GIOPAR_MASTERGFX  0x00000800 /* GFX can act as a bus master */
+#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */
+#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */
+#define SGIMC_GIOPAR_PLINEEXP0  0x00004000 /* EXP(slot0) has pipeline attr */
+#define SGIMC_GIOPAR_PLINEEXP1  0x00008000 /* EXP(slot1) has pipeline attr */
+
+        u32 _unused9;
+        volatile u32 cputp;     /* CPU bus arb time period */
+
+        u32 _unused10[3];
+        volatile u32 lbursttp;  /* Time period for long bursts */
+
+        /* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must
+         * be the same size. The size encoding for supported SIMMs is bellow */
+        u32 _unused11[9];
+        volatile u32 mconfig0;  /* Memory config register zero */
+        u32 _unused12;
+        volatile u32 mconfig1;  /* Memory config register one */
+#define SGIMC_MCONFIG_BASEADDR  0x000000ff /* Base address of bank*/
+#define SGIMC_MCONFIG_RMASK     0x00001f00 /* Ram config bitmask */
+#define SGIMC_MCONFIG_BVALID    0x00002000 /* Bank is valid */
+#define SGIMC_MCONFIG_SBANKS    0x00004000 /* Number of subbanks */
+
+        u32 _unused13;
+        volatile u32 cmacc;        /* Mem access config for CPU */
+        u32 _unused14;
+        volatile u32 gmacc;        /* Mem access config for GIO */
+
+        /* This define applies to both cmacc and gmacc registers above. */
+#define SGIMC_MACC_ALIASBIG     0x20000000 /* 512MB home for alias */
+
+        /* Error address/status regs from GIO and CPU perspectives. */
+        u32 _unused15;
+        volatile u32 cerr;      /* Error address reg for CPU */
+        u32 _unused16;
+        volatile u32 cstat;     /* Status reg for CPU */
+#define SGIMC_CSTAT_RD          0x00000100 /* read parity error */
+#define SGIMC_CSTAT_PAR         0x00000200 /* CPU parity error */
+#define SGIMC_CSTAT_ADDR        0x00000400 /* memory bus error bad addr */
+#define SGIMC_CSTAT_SYSAD_PAR   0x00000800 /* sysad parity error */
+#define SGIMC_CSTAT_SYSCMD_PAR  0x00001000 /* syscmd parity error */
+#define SGIMC_CSTAT_BAD_DATA    0x00002000 /* bad data identifier */
+#define SGIMC_CSTAT_PAR_MASK    0x00001f00 /* parity error mask */
+#define SGIMC_CSTAT_RD_PAR      (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR)
+
+        u32 _unused17;
+        volatile u32 gerr;      /* Error address reg for GIO */
+        u32 _unused18;
+        volatile u32 gstat;     /* Status reg for GIO */
+#define SGIMC_GSTAT_RD          0x00000100 /* read parity error */
+#define SGIMC_GSTAT_WR          0x00000200 /* write parity error */
+#define SGIMC_GSTAT_TIME        0x00000400 /* GIO bus timed out */
+#define SGIMC_GSTAT_PROM        0x00000800 /* write to PROM when PROM_EN not set */
+#define SGIMC_GSTAT_ADDR        0x00001000 /* parity error on addr cycle */
+#define SGIMC_GSTAT_BC          0x00002000 /* parity error on byte count cycle */
+#define SGIMC_GSTAT_PIO_RD      0x00004000 /* read data parity on pio */
+#define SGIMC_GSTAT_PIO_WR      0x00008000 /* write data parity on pio */
+
+        /* Special hard bus locking registers. */
+        u32 _unused19;
+        volatile u32 syssembit;         /* Uni-bit system semaphore */
+        u32 _unused20;
+        volatile u32 mlock;             /* Global GIO memory access lock */
+        u32 _unused21;
+        volatile u32 elock;             /* Locks EISA from GIO accesses */
+
+        /* GIO dma control registers. */
+        u32 _unused22[15];
+        volatile u32 gio_dma_trans;     /* DMA mask to translation GIO addrs */
+        u32 _unused23;
+        volatile u32 gio_dma_sbits;     /* DMA GIO addr substitution bits */
+        u32 _unused24;
+        volatile u32 dma_intr_cause;    /* DMA IRQ cause indicator bits */
+        u32 _unused25;
+        volatile u32 dma_ctrl;          /* Main DMA control reg */
+
+        /* DMA TLB entry 0 */
+        u32 _unused26[5];
+        volatile u32 dtlb_hi0;
+        u32 _unused27;
+        volatile u32 dtlb_lo0;
+
+        /* DMA TLB entry 1 */
+        u32 _unused28;
+        volatile u32 dtlb_hi1;
+        u32 _unused29;
+        volatile u32 dtlb_lo1;
+
+        /* DMA TLB entry 2 */
+        u32 _unused30;
+        volatile u32 dtlb_hi2;
+        u32 _unused31;
+        volatile u32 dtlb_lo2;
+
+        /* DMA TLB entry 3 */
+        u32 _unused32;
+        volatile u32 dtlb_hi3;
+        u32 _unused33;
+        volatile u32 dtlb_lo3;
+        
+        u32 _unused34[0x0392];
+        
+        u32 _unused35;
+        volatile u32 rpsscounter;       /* Chirps at 100ns */
+
+        u32 _unused36[0x1000/4-2*4];
+        
+        u32 _unused37;
+        volatile u32 maddronly;         /* Address DMA goes at */
+        u32 _unused38;
+        volatile u32 maddrpdeflts;      /* Same as above, plus set defaults */
+        u32 _unused39;
+        volatile u32 dmasz;             /* DMA count */
+        u32 _unused40;
+        volatile u32 ssize;             /* DMA stride size */
+        u32 _unused41;
+        volatile u32 gmaddronly;        /* Set GIO DMA but don't start trans */
+        u32 _unused42;
+        volatile u32 dmaddnpgo;         /* Set GIO DMA addr + start transfer */
+        u32 _unused43;
+        volatile u32 dmamode;           /* DMA mode config bit settings */
+        u32 _unused44;
+        volatile u32 dmaccount;         /* Zoom and byte count for DMA */
+        u32 _unused45;
+        volatile u32 dmastart;          /* Pedal to the metal. */
+        u32 _unused46;
+        volatile u32 dmarunning;        /* DMA op is in progress */
+        u32 _unused47;
+        volatile u32 maddrdefstart;     /* Set dma addr, defaults, and kick it */
+};
+
+extern struct sgimc_regs *sgimc;
+#define SGIMC_BASE              0x1fa00000      /* physical */
+
+/* Base location of the two ram banks found in IP2[0268] machines. */
+#define SGIMC_SEG0_BADDR        0x08000000
+#define SGIMC_SEG1_BADDR        0x20000000
+
+/* Maximum size of the above banks are per machine. */
+#define SGIMC_SEG0_SIZE_ALL             0x10000000 /* 256MB */
+#define SGIMC_SEG1_SIZE_IP20_IP22       0x08000000 /* 128MB */
+#define SGIMC_SEG1_SIZE_IP26_IP28       0x20000000 /* 512MB */
+
+extern void sgimc_init(void);
+
+#endif /* _SGI_MC_H */