Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 200 insertions, 0 deletions

diff --git a/include/asm-mips/sgi/ioc.h b/include/asm-mips/sgi/ioc.h
new file mode 100644
index 000000000000..169187f53fbc
--- /dev/null
+++ b/include/asm-mips/sgi/ioc.h
@@ -0,0 +1,200 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ioc.h: Definitions for SGI I/O Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2001, 2003 Ladislav Michl
+ */
+
+#ifndef _SGI_IOC_H
+#define _SGI_IOC_H
+
+#include <linux/types.h>
+#include <asm/sgi/pi1.h>
+
+/* 
+ * All registers are 8-bit wide alligned on 32-bit boundary. Bad things
+ * happen if you try word access them. You have been warned.
+ */
+
+struct sgioc_uart_regs {
+        u8 _ctrl1[3];
+        volatile u8 ctrl1;
+        u8 _data1[3];
+        volatile u8 data1;
+        u8 _ctrl2[3];
+        volatile u8 ctrl2;
+        u8 _data2[3];
+        volatile u8 data2;
+};
+
+struct sgioc_keyb_regs {
+        u8 _data[3];
+        volatile u8 data;
+        u8 _command[3];
+        volatile u8 command;
+};
+
+struct sgint_regs {
+        u8 _istat0[3];
+        volatile u8 istat0;             /* Interrupt status zero */
+#define SGINT_ISTAT0_FFULL      0x01
+#define SGINT_ISTAT0_SCSI0      0x02
+#define SGINT_ISTAT0_SCSI1      0x04
+#define SGINT_ISTAT0_ENET       0x08
+#define SGINT_ISTAT0_GFXDMA     0x10
+#define SGINT_ISTAT0_PPORT      0x20
+#define SGINT_ISTAT0_HPC2       0x40
+#define SGINT_ISTAT0_LIO2       0x80
+        u8 _imask0[3];
+        volatile u8 imask0;             /* Interrupt mask zero */
+        u8 _istat1[3];
+        volatile u8 istat1;             /* Interrupt status one */
+#define SGINT_ISTAT1_ISDNI      0x01
+#define SGINT_ISTAT1_PWR        0x02
+#define SGINT_ISTAT1_ISDNH      0x04
+#define SGINT_ISTAT1_LIO3       0x08
+#define SGINT_ISTAT1_HPC3       0x10
+#define SGINT_ISTAT1_AFAIL      0x20
+#define SGINT_ISTAT1_VIDEO      0x40
+#define SGINT_ISTAT1_GIO2       0x80
+        u8 _imask1[3];
+        volatile u8 imask1;             /* Interrupt mask one */
+        u8 _vmeistat[3];
+        volatile u8 vmeistat;           /* VME interrupt status */
+        u8 _cmeimask0[3];
+        volatile u8 cmeimask0;          /* VME interrupt mask zero */
+        u8 _cmeimask1[3];
+        volatile u8 cmeimask1;          /* VME interrupt mask one */
+        u8 _cmepol[3];
+        volatile u8 cmepol;             /* VME polarity */
+        u8 _tclear[3];
+        volatile u8 tclear;
+        u8 _errstat[3];
+        volatile u8 errstat;    /* Error status reg, reserved on INT2 */
+        u32 _unused0[2];
+        u8 _tcnt0[3];
+        volatile u8 tcnt0;              /* counter 0 */
+        u8 _tcnt1[3];
+        volatile u8 tcnt1;              /* counter 1 */
+        u8 _tcnt2[3];
+        volatile u8 tcnt2;              /* counter 2 */
+        u8 _tcword[3];
+        volatile u8 tcword;             /* control word */
+#define SGINT_TCWORD_BCD        0x01    /* Use BCD mode for counters */
+#define SGINT_TCWORD_MMASK      0x0e    /* Mode bitmask. */
+#define SGINT_TCWORD_MITC       0x00    /* IRQ on terminal count (doesn't work) */
+#define SGINT_TCWORD_MOS        0x02    /* One-shot IRQ mode. */
+#define SGINT_TCWORD_MRGEN      0x04    /* Normal rate generation */
+#define SGINT_TCWORD_MSWGEN     0x06    /* Square wave generator mode */
+#define SGINT_TCWORD_MSWST      0x08    /* Software strobe */
+#define SGINT_TCWORD_MHWST      0x0a    /* Hardware strobe */
+#define SGINT_TCWORD_CMASK      0x30    /* Command mask */
+#define SGINT_TCWORD_CLAT       0x00    /* Latch command */
+#define SGINT_TCWORD_CLSB       0x10    /* LSB read/write */
+#define SGINT_TCWORD_CMSB       0x20    /* MSB read/write */
+#define SGINT_TCWORD_CALL       0x30    /* Full counter read/write */
+#define SGINT_TCWORD_CNT0       0x00    /* Select counter zero */
+#define SGINT_TCWORD_CNT1       0x40    /* Select counter one */
+#define SGINT_TCWORD_CNT2       0x80    /* Select counter two */
+#define SGINT_TCWORD_CRBCK      0xc0    /* Readback command */
+};
+
+/*
+ * The timer is the good old 8254.  Unlike in PCs it's clocked at exactly 1MHz
+ */
+#define SGINT_TIMER_CLOCK       1000000
+
+/*
+ * This is the constant we're using for calibrating the counter.
+ */
+#define SGINT_TCSAMP_COUNTER    ((SGINT_TIMER_CLOCK / HZ) + 255)
+
+/* We need software copies of these because they are write only. */
+extern u8 sgi_ioc_reset, sgi_ioc_write;
+
+struct sgioc_regs {
+        struct pi1_regs pport;
+        u32 _unused0[2];
+        struct sgioc_uart_regs uart;
+        struct sgioc_keyb_regs kbdmouse;
+        u8 _gcsel[3];
+        volatile u8 gcsel;
+        u8 _genctrl[3];
+        volatile u8 genctrl;
+        u8 _panel[3];
+        volatile u8 panel;
+#define SGIOC_PANEL_POWERON     0x01
+#define SGIOC_PANEL_POWERINTR   0x02
+#define SGIOC_PANEL_VOLDNINTR   0x10
+#define SGIOC_PANEL_VOLDNHOLD   0x20
+#define SGIOC_PANEL_VOLUPINTR   0x40
+#define SGIOC_PANEL_VOLUPHOLD   0x80
+        u32 _unused1;
+        u8 _sysid[3];
+        volatile u8 sysid;
+#define SGIOC_SYSID_FULLHOUSE   0x01
+#define SGIOC_SYSID_BOARDREV(x) ((x & 0xe0) > 5) 
+#define SGIOC_SYSID_CHIPREV(x)  ((x & 0x1e) > 1)
+        u32 _unused2;
+        u8 _read[3];
+        volatile u8 read;
+        u32 _unused3;
+        u8 _dmasel[3];
+        volatile u8 dmasel;
+#define SGIOC_DMASEL_SCLK10MHZ  0x00    /* use 10MHZ serial clock */
+#define SGIOC_DMASEL_ISDNB      0x01    /* enable isdn B */
+#define SGIOC_DMASEL_ISDNA      0x02    /* enable isdn A */
+#define SGIOC_DMASEL_PPORT      0x04    /* use parallel DMA */
+#define SGIOC_DMASEL_SCLK667MHZ 0x10    /* use 6.67MHZ serial clock */
+#define SGIOC_DMASEL_SCLKEXT    0x20    /* use external serial clock */
+        u32 _unused4;
+        u8 _reset[3];
+        volatile u8 reset;
+#define SGIOC_RESET_PPORT       0x01    /* 0=parport reset, 1=nornal */
+#define SGIOC_RESET_KBDMOUSE    0x02    /* 0=kbdmouse reset, 1=normal */
+#define SGIOC_RESET_EISA        0x04    /* 0=eisa reset, 1=normal */
+#define SGIOC_RESET_ISDN        0x08    /* 0=isdn reset, 1=normal */
+#define SGIOC_RESET_LC0OFF      0x10    /* guiness: turn led off (red, else green) */
+#define SGIOC_RESET_LC1OFF      0x20    /* guiness: turn led off (green, else amber) */
+        u32 _unused5;
+        u8 _write[3];
+        volatile u8 write;
+#define SGIOC_WRITE_NTHRESH     0x01    /* use 4.5db threshhold */
+#define SGIOC_WRITE_TPSPEED     0x02    /* use 100ohm TP speed */
+#define SGIOC_WRITE_EPSEL       0x04    /* force cable mode: 1=AUI 0=TP */
+#define SGIOC_WRITE_EASEL       0x08    /* 1=autoselect 0=manual cable selection */
+#define SGIOC_WRITE_U1AMODE     0x10    /* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_U0AMODE     0x20    /* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_MLO         0x40    /* 1=4.75V 0=+5V */
+#define SGIOC_WRITE_MHI         0x80    /* 1=5.25V 0=+5V */
+        u32 _unused6;
+        struct sgint_regs int3;
+        u32 _unused7[16];
+        volatile u32 extio;             /* FullHouse only */
+#define EXTIO_S0_IRQ_3          0x8000  /* S0: vid.vsync */
+#define EXTIO_S0_IRQ_2          0x4000  /* S0: gfx.fifofull */
+#define EXTIO_S0_IRQ_1          0x2000  /* S0: gfx.int */
+#define EXTIO_S0_RETRACE        0x1000
+#define EXTIO_SG_IRQ_3          0x0800  /* SG: vid.vsync */
+#define EXTIO_SG_IRQ_2          0x0400  /* SG: gfx.fifofull */
+#define EXTIO_SG_IRQ_1          0x0200  /* SG: gfx.int */
+#define EXTIO_SG_RETRACE        0x0100
+#define EXTIO_GIO_33MHZ         0x0080
+#define EXTIO_EISA_BUSERR       0x0040
+#define EXTIO_MC_BUSERR         0x0020
+#define EXTIO_HPC3_BUSERR       0x0010
+#define EXTIO_S0_STAT_1         0x0008
+#define EXTIO_S0_STAT_0         0x0004
+#define EXTIO_SG_STAT_1         0x0002
+#define EXTIO_SG_STAT_0         0x0001
+};
+
+extern struct sgioc_regs *sgioc;
+extern struct sgint_regs *sgint;
+
+#endif