MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 86 deletions

diff --git a/include/asm-mips/sgi/gio.h b/include/asm-mips/sgi/gio.h
deleted file mode 100644
index 889cf028c95d..000000000000
--- a/include/asm-mips/sgi/gio.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * gio.h: Definitions for SGI GIO bus
- *
- * Copyright (C) 2002 Ladislav Michl
- */
-
-#ifndef _SGI_GIO_H
-#define _SGI_GIO_H
-
-/*
- * GIO bus addresses
- *
- * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have
- * three physical connectors, but only two slots, GFX and EXP0.
- *
- * There is 10MB of GIO address space for GIO64 slot devices
- * slot#   slot type address range            size
- * -----   --------- ----------------------- -----
- *   0     GFX       0x1f000000 - 0x1f3fffff   4MB
- *   1     EXP0      0x1f400000 - 0x1f5fffff   2MB
- *   2     EXP1      0x1f600000 - 0x1f9fffff   4MB
- *
- * There are un-slotted devices, HPC, I/O and misc devices, which are grouped
- * into the HPC address space.
- *   -     MISC      0x1fb00000 - 0x1fbfffff   1MB
- *
- * Following space is reserved and unused
- *   -     RESERVED  0x18000000 - 0x1effffff 112MB
- *
- * GIO bus IDs
- *
- * Each GIO bus device identifies itself to the system by answering a
- * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less
- * than 128 are 8 bits long, with the most significant 24 bits read from
- * the slot undefined.
- *
- * 32-bit IDs are divided into
- *      bits 0:6        the product ID; ranges from 0x00 to 0x7F.
- *      bit 7           0=GIO Product ID is 8 bits wide
- *                      1=GIO Product ID is 32 bits wide.
- *      bits 8:15       manufacturer version for the product.
- *      bit 16          0=GIO32 and GIO32-bis, 1=GIO64.
- *      bit 17          0=no ROM present
- *                      1=ROM present on this board AND next three words
- *                      space define the ROM.
- *      bits 18:31      up to manufacturer.
- *
- * IDs above 0x50/0xd0 are of 3rd party boards.
- *
- * 8-bit IDs
- *      0x01            XPI low cost FDDI
- *      0x02            GTR TokenRing
- *      0x04            Synchronous ISDN
- *      0x05            ATM board [*]
- *      0x06            Canon Interface
- *      0x07            16 bit SCSI Card [*]
- *      0x08            JPEG (Double Wide)
- *      0x09            JPEG (Single Wide)
- *      0x0a            XPI mez. FDDI device 0
- *      0x0b            XPI mez. FDDI device 1
- *      0x0c            SMPTE 259M Video [*]
- *      0x0d            Babblefish Compression [*]
- *      0x0e            E-Plex 8-port Ethernet
- *      0x30            Lyon Lamb IVAS
- *      0xb8            GIO 100BaseTX Fast Ethernet (gfe)
- *
- * [*] Device provide 32-bit ID.
- *
- */
-
-#define GIO_ID(x)               (x & 0x7f)
-#define GIO_32BIT_ID            0x80
-#define GIO_REV(x)              ((x >> 8) & 0xff)
-#define GIO_64BIT_IFACE         0x10000
-#define GIO_ROM_PRESENT         0x20000
-#define GIO_VENDOR_CODE(x)      ((x >> 18) & 0x3fff)
-
-#define GIO_SLOT_GFX_BASE       0x1f000000
-#define GIO_SLOT_EXP0_BASE      0x1f400000
-#define GIO_SLOT_EXP1_BASE      0x1f600000
-
-#endif /* _SGI_GIO_H */