[PATCH] m32r: Support M3A-2170(Mappi-III) platform

This patchset is for supporting a new m32r platform, M3A-2170(Mappi-III)
evaluation board.  An M32R chip multiprocessor is equipped on the board.
http://http://www.linux-m32r.org/eng/platform/platform.html

	* arch/m32r/Kconfig: Support Mappi-III platform.
	* arch/m32r/kernel/Makefile: ditto.
	* arch/m32r/kernel/io_mappi3.c: ditto.
	* arch/m32r/kernel/setup.c: ditto.
	* arch/m32r/kernel/setup_mappi3.c: ditto.
	* include/asm-m32r/m32102.h: ditto.
	* include/asm-m32r/m32r.h: ditto.
	* include/asm-m32r/mappi3/mappi3_pld.h: ditto.

	* include/asm-m32r/ide.h: CF support for Mappi-III.
	* arch/m32r/kernel/setup_mappi3.c: ditto.

	* arch/m32r/mappi3/defconfig.smp: A default config file for Mappi-III.
	* arch/m32r/mappi3/dot.gdbinit: A default .gdbinit file for Mappi-III.

	* arch/m32r/boot/compressed/m32r_sio.c: Modified for Mappi-III
	  - At boot time, m32r-g00ff bootloader makes MMU off for Mappi-III,
	    on the contrary it makes MMU on for Mappi-II.

	* arch/m32r/kernel/io_mappi2.c: Update comments.
	* arch/m32r/kernel/setup_mappi2.c: ditto.

Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

4 files changed, 149 insertions, 1 deletions

diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
index be64f24e37ee..194393bd8beb 100644
--- a/include/asm-m32r/ide.h
+++ b/include/asm-m32r/ide.h
@@ -35,7 +35,7 @@
 static __inline__ int ide_default_irq(unsigned long base)
 {
         switch (base) {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2)
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || defined(CONFIG_PLAT_MAPPI3)
                 case 0x1f0: return PLD_IRQ_CFIREQ;
                 default:
                         return 0;
diff --git a/include/asm-m32r/m32102.h b/include/asm-m32r/m32102.h
index b56034026bf8..cb98101f4f6e 100644
--- a/include/asm-m32r/m32102.h
+++ b/include/asm-m32r/m32102.h
@@ -175,6 +175,7 @@
 #define M32R_ICU_CR5_PORTL    (0x210+M32R_ICU_OFFSET)  /* INT4 */
 #define M32R_ICU_CR6_PORTL    (0x214+M32R_ICU_OFFSET)  /* INT5 */
 #define M32R_ICU_CR7_PORTL    (0x218+M32R_ICU_OFFSET)  /* INT6 */
+#define M32R_ICU_CR8_PORTL    (0x219+M32R_ICU_OFFSET)  /* INT7 */
 #define M32R_ICU_CR16_PORTL   (0x23C+M32R_ICU_OFFSET)  /* MFT0 */
 #define M32R_ICU_CR17_PORTL   (0x240+M32R_ICU_OFFSET)  /* MFT1 */
 #define M32R_ICU_CR18_PORTL   (0x244+M32R_ICU_OFFSET)  /* MFT2 */
diff --git a/include/asm-m32r/m32r.h b/include/asm-m32r/m32r.h
index f116649bbef3..fd2b2823762b 100644
--- a/include/asm-m32r/m32r.h
+++ b/include/asm-m32r/m32r.h
@@ -36,6 +36,10 @@
 #include <asm/mappi2/mappi2_pld.h>
 #endif  /* CONFIG_PLAT_MAPPI2 */
 
+#if defined(CONFIG_PLAT_MAPPI3)
+#include <asm/mappi3/mappi3_pld.h>
+#endif  /* CONFIG_PLAT_MAPPI3 */
+
 #if defined(CONFIG_PLAT_USRV)
 #include <asm/m32700ut/m32700ut_pld.h>
 #endif
diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/include/asm-m32r/mappi3/mappi3_pld.h
new file mode 100644
index 000000000000..3f1551f7f01f
--- /dev/null
+++ b/include/asm-m32r/mappi3/mappi3_pld.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm/mappi3/mappi3_pld.h
+ *
+ * Definitions for Extended IO Logic on MAPPI3 board.
+ *  based on m32700ut_pld.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ */
+
+#ifndef _MAPPI3_PLD_H
+#define _MAPPI3_PLD_H
+
+#ifndef __ASSEMBLY__
+/* FIXME:
+ * Some C functions use non-cache address, so can't define non-cache address.
+ */
+#define PLD_BASE                (0x1c000000 /* + NONCACHE_OFFSET */)
+#define __reg8                  (volatile unsigned char *)
+#define __reg16                 (volatile unsigned short *)
+#define __reg32                 (volatile unsigned int *)
+#else
+#define PLD_BASE                (0x1c000000 + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif  /* __ASSEMBLY__ */
+
+/* CFC */
+#define PLD_CFRSTCR             __reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS               __reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK             __reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR             __reg16(PLD_BASE + 0x0006)
+#define PLD_CFCR0               __reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1               __reg16(PLD_BASE + 0x000c)
+
+/* MMC */
+#define PLD_MMCCR               __reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD              __reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS              __reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR             __reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT          __reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT          __reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET              __reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP               __reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA            __reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA            __reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA          __reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA          __reg16(PLD_BASE + 0x7006)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR                __reg16(PLD_BASE + 0x14000)
+
+
+/*==== ICU ====*/
+#define  M32R_IRQ_PC104        (5)   /* INT4(PC/104) */
+#define  M32R_IRQ_I2C          (28)  /* I2C-BUS     */
+#define  PLD_IRQ_CFIREQ       (6)  /* INT5 CFC Card Interrupt */
+#define  PLD_IRQ_CFC_INSERT   (7)  /* INT6 CFC Card Insert */
+#define  PLD_IRQ_CFC_EJECT    (8)  /* INT7 CFC Card Eject */
+#define  PLD_IRQ_MMCCARD      (43)  /* MMC Card Insert */
+#define  PLD_IRQ_MMCIRQ       (44)  /* MMC Transfer Done */
+
+
+#if 0
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR             __reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON          0x001
+#define PLD_IOLED_1_OFF         0x000
+#define PLD_IOLED_2_ON          0x002
+#define PLD_IOLED_2_OFF         0x000
+
+/* DIP Switch
+ *  0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ *  1: -
+ *  2: -
+ *  3: -
+ */
+#define PLD_IOSWSTS             __reg16(PLD_BASE + 0x14004)
+#define PLD_IOSWSTS_IOSW2       0x0200
+#define PLD_IOSWSTS_IOSW1       0x0100
+#define PLD_IOSWSTS_IOWP0       0x0001
+
+#endif
+
+/* CRC */
+#define PLD_CRC7DATA            __reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA          __reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA           __reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA         __reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA          __reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA        __reg16(PLD_BASE + 0x1800a)
+
+
+#if 0
+/* RTC */
+#define PLD_RTCCR               __reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR             __reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA           __reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA           __reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT           __reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR             __reg16(PLD_BASE + 0x20000)
+#define PLD_ESIO0CR_TXEN        0x0001
+#define PLD_ESIO0CR_RXEN        0x0002
+#define PLD_ESIO0MOD0           __reg16(PLD_BASE + 0x20002)
+#define PLD_ESIO0MOD0_CTSS      0x0040
+#define PLD_ESIO0MOD0_RTSS      0x0080
+#define PLD_ESIO0MOD1           __reg16(PLD_BASE + 0x20004)
+#define PLD_ESIO0MOD1_LMFS      0x0010
+#define PLD_ESIO0STS            __reg16(PLD_BASE + 0x20006)
+#define PLD_ESIO0STS_TEMP       0x0001
+#define PLD_ESIO0STS_TXCP       0x0002
+#define PLD_ESIO0STS_RXCP       0x0004
+#define PLD_ESIO0STS_TXSC       0x0100
+#define PLD_ESIO0STS_RXSC       0x0200
+#define PLD_ESIO0STS_TXREADY    (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR          __reg16(PLD_BASE + 0x20008)
+#define PLD_ESIO0INTCR_TXIEN    0x0002
+#define PLD_ESIO0INTCR_RXCEN    0x0004
+#define PLD_ESIO0BAUR           __reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB            __reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB            __reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR                __reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD               __reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS               __reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR             __reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR              __reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB               __reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB               __reg16(PLD_BASE + 0x3800e)
+
+#endif
+
+#endif  /* _MAPPI3_PLD.H */