Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 107 insertions, 0 deletions

diff --git a/include/asm-i386/mach-visws/piix4.h b/include/asm-i386/mach-visws/piix4.h
new file mode 100644
index 000000000000..83ea4f46e419
--- /dev/null
+++ b/include/asm-i386/mach-visws/piix4.h
@@ -0,0 +1,107 @@
+#ifndef __I386_SGI_PIIX_H
+#define __I386_SGI_PIIX_H
+
+/*
+ * PIIX4 as used on SGI Visual Workstations
+ */
+
+#define PIIX_PM_START           0x0F80
+
+#define SIO_GPIO_START          0x0FC0
+
+#define SIO_PM_START            0x0FC8
+
+#define PMBASE                  PIIX_PM_START
+#define GPIREG0                 (PMBASE+0x30)
+#define GPIREG(x)               (GPIREG0+((x)/8))
+#define GPIBIT(x)               (1 << ((x)%8))
+
+#define PIIX_GPI_BD_ID1         18
+#define PIIX_GPI_BD_ID2         19
+#define PIIX_GPI_BD_ID3         20
+#define PIIX_GPI_BD_ID4         21
+#define PIIX_GPI_BD_REG         GPIREG(PIIX_GPI_BD_ID1)
+#define PIIX_GPI_BD_MASK        (GPIBIT(PIIX_GPI_BD_ID1) | \
+                                GPIBIT(PIIX_GPI_BD_ID2) | \
+                                GPIBIT(PIIX_GPI_BD_ID3) | \
+                                GPIBIT(PIIX_GPI_BD_ID4) )
+
+#define PIIX_GPI_BD_SHIFT       (PIIX_GPI_BD_ID1 % 8)
+
+#define SIO_INDEX               0x2e
+#define SIO_DATA                0x2f
+
+#define SIO_DEV_SEL             0x7
+#define SIO_DEV_ENB             0x30
+#define SIO_DEV_MSB             0x60
+#define SIO_DEV_LSB             0x61
+
+#define SIO_GP_DEV              0x7
+
+#define SIO_GP_BASE             SIO_GPIO_START
+#define SIO_GP_MSB              (SIO_GP_BASE>>8)
+#define SIO_GP_LSB              (SIO_GP_BASE&0xff)
+
+#define SIO_GP_DATA1            (SIO_GP_BASE+0)
+
+#define SIO_PM_DEV              0x8
+
+#define SIO_PM_BASE             SIO_PM_START
+#define SIO_PM_MSB              (SIO_PM_BASE>>8)
+#define SIO_PM_LSB              (SIO_PM_BASE&0xff)
+#define SIO_PM_INDEX            (SIO_PM_BASE+0)
+#define SIO_PM_DATA             (SIO_PM_BASE+1)
+
+#define SIO_PM_FER2             0x1
+
+#define SIO_PM_GP_EN            0x80
+
+
+
+/*
+ * This is the dev/reg where generating a config cycle will
+ * result in a PCI special cycle.
+ */
+#define SPECIAL_DEV             0xff
+#define SPECIAL_REG             0x00
+
+/*
+ * PIIX4 needs to see a special cycle with the following data
+ * to be convinced the processor has gone into the stop grant
+ * state.  PIIX4 insists on seeing this before it will power
+ * down a system.
+ */
+#define PIIX_SPECIAL_STOP               0x00120002
+
+#define PIIX4_RESET_PORT        0xcf9
+#define PIIX4_RESET_VAL         0x6
+
+#define PMSTS_PORT              0xf80   // 2 bytes      PM Status
+#define PMEN_PORT               0xf82   // 2 bytes      PM Enable
+#define PMCNTRL_PORT            0xf84   // 2 bytes      PM Control
+
+#define PM_SUSPEND_ENABLE       0x2000  // start sequence to suspend state
+
+/*
+ * PMSTS and PMEN I/O bit definitions.
+ * (Bits are the same in both registers)
+ */
+#define PM_STS_RSM              (1<<15) // Resume Status
+#define PM_STS_PWRBTNOR         (1<<11) // Power Button Override
+#define PM_STS_RTC              (1<<10) // RTC status
+#define PM_STS_PWRBTN           (1<<8)  // Power Button Pressed?
+#define PM_STS_GBL              (1<<5)  // Global Status
+#define PM_STS_BM               (1<<4)  // Bus Master Status
+#define PM_STS_TMROF            (1<<0)  // Timer Overflow Status.
+
+/*
+ * Stop clock GPI register
+ */
+#define PIIX_GPIREG0                    (0xf80 + 0x30)
+
+/*
+ * Stop clock GPI bit in GPIREG0
+ */
+#define PIIX_GPI_STPCLK         0x4     // STPCLK signal routed back in
+
+#endif