ide: remove <asm-cris/ide.h>

Remove <asm-cris/arch-v{10,32}/ide.h> and <asm-cris/ide.h>.

This has been a broken code for some time now and needs rewrite
to match IDE core code / host driver model anyway.

Cc: Jesper Nilsson <Jesper.Nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 91 deletions

diff --git a/include/asm-cris/arch-v10/ide.h b/include/asm-cris/arch-v10/ide.h
deleted file mode 100644
index 5366e6239328..000000000000
--- a/include/asm-cris/arch-v10/ide.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  linux/include/asm-cris/ide.h
- *
- *  Copyright (C) 2000, 2001, 2002  Axis Communications AB
- *
- *  Authors:    Bjorn Wesen
- *
- */
-
-/*
- *  This file contains the ETRAX 100LX specific IDE code.
- */
-
-#ifndef __ASMCRIS_IDE_H
-#define __ASMCRIS_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/arch/svinto.h>
-#include <asm/io.h>
-#include <asm-generic/ide_iops.h>
-
-
-/* ETRAX 100 can support 4 IDE busses on the same pins (serialized) */
-
-#define MAX_HWIFS       4
-
-static inline int ide_default_irq(unsigned long base)
-{
-        /* all IDE busses share the same IRQ, number 4.
-         * this has the side-effect that ide-probe.c will cluster our 4 interfaces
-         * together in a hwgroup, and will serialize accesses. this is good, because
-         * we can't access more than one interface at the same time on ETRAX100.
-         */
-        return 4;
-}
-
-static inline unsigned long ide_default_io_base(int index)
-{
-        /* we have no real I/O base address per interface, since all go through the
-         * same register. but in a bitfield in that register, we have the i/f number.
-         * so we can use the io_base to remember that bitfield.
-         */
-        static const unsigned long io_bases[MAX_HWIFS] = {
-                IO_FIELD(R_ATA_CTRL_DATA, sel, 0),
-                IO_FIELD(R_ATA_CTRL_DATA, sel, 1),
-                IO_FIELD(R_ATA_CTRL_DATA, sel, 2),
-                IO_FIELD(R_ATA_CTRL_DATA, sel, 3)
-        };
-        return io_bases[index];
-}
-
-/* this is called once for each interface, to setup the port addresses. data_port is the result
- * of the ide_default_io_base call above. ctrl_port will be 0, but that is don't care for us.
- */
-
-static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, unsigned long ctrl_port, int *irq)
-{
-        int i;
-
-        /* fill in ports for ATA addresses 0 to 7 */
-        for (i = 0; i <= 7; i++) {
-                hw->io_ports_array[i] = data_port |
-                        IO_FIELD(R_ATA_CTRL_DATA, addr, i) |
-                        IO_STATE(R_ATA_CTRL_DATA, cs0, active);
-        }
-
-        /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
-        hw->io_ports.ctl_addr = data_port |
-                        IO_FIELD(R_ATA_CTRL_DATA, addr, 6) |
-                        IO_STATE(R_ATA_CTRL_DATA, cs1, active);
-
-        /* whats this for ? */
-        hw->io_ports.irq_addr = 0;
-}
-
-static inline void ide_init_default_hwifs(void)
-{
-        hw_regs_t hw;
-        int index;
-
-        for(index = 0; index < MAX_HWIFS; index++) {
-                ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL);
-                hw.irq = ide_default_irq(ide_default_io_base(index));
-                ide_register_hw(&hw, NULL);
-        }
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMCRIS_IDE_H */