[Blackfin] arch: add Blackfin on-chip SIR IrDA driver support

 - add platform device resources in board files
 - add new bfin_sir.h to each machines

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

3 files changed, 168 insertions, 17 deletions

diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index b6f513bee56e..fbe88dee3e2d 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -1,22 +1,38 @@
+/*
+ * file:        include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *      blackfin serial driver head file
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
 #include <linux/serial.h>
 #include <asm/dma.h>
 #include <asm/portmux.h>
 
-#define NR_PORTS                1
-
-#define OFFSET_THR              0x00    /* Transmit Holding register            */
-#define OFFSET_RBR              0x00    /* Receive Buffer register              */
-#define OFFSET_DLL              0x00    /* Divisor Latch (Low-Byte)             */
-#define OFFSET_IER              0x04    /* Interrupt Enable Register            */
-#define OFFSET_DLH              0x04    /* Divisor Latch (High-Byte)            */
-#define OFFSET_IIR              0x08    /* Interrupt Identification Register    */
-#define OFFSET_LCR              0x0C    /* Line Control Register                */
-#define OFFSET_MCR              0x10    /* Modem Control Register               */
-#define OFFSET_LSR              0x14    /* Line Status Register                 */
-#define OFFSET_MSR              0x18    /* Modem Status Register                */
-#define OFFSET_SCR              0x1C    /* SCR Scratch Register                 */
-#define OFFSET_GCTL             0x24    /* Global Control Register              */
-
 #define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
 #define UART_GET_DLL(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLL))
 #define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
@@ -84,7 +100,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
         bfin_write16(uart->port.membase + OFFSET_LSR, -1);
 }
 
-struct bfin_serial_port bfin_serial_ports[NR_PORTS];
+struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
         unsigned long   uart_base_addr;
         int             uart_irq;
@@ -115,7 +131,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 
 #define DRIVER_NAME "bfin-uart"
 
-int nr_ports = NR_PORTS;
+int nr_ports = BFIN_UART_NR_PORTS;
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
 
diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/include/asm-blackfin/mach-bf533/bfin_sir.h
new file mode 100644
index 000000000000..cefcf8bb505b
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/bfin_sir.h
@@ -0,0 +1,120 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+        char *buf;
+        int head;
+        int tail;
+        };
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+        unsigned char __iomem   *membase;
+        unsigned int            irq;
+        unsigned int            lsr;
+        unsigned long           clk;
+        struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+        int                     tx_done;
+        struct dma_rx_buf       rx_dma_buf;
+        struct timer_list       rx_dma_timer;
+        int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+        unsigned int            tx_dma_channel;
+        unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+        unsigned long   base_addr;
+        int             irq;
+        unsigned int    rx_dma_channel;
+        unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+        {
+        0xFFC00400,
+        IRQ_UART_RX,
+        CH_UART_RX,
+        CH_UART_TX,
+        },
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+        struct bfin_sir_port    *sir_port;
+        spinlock_t              lock;
+        unsigned int            open;
+        int                     speed;
+        int                     newspeed;
+
+        struct sk_buff          *txskb;
+        struct sk_buff          *rxskb;
+        struct net_device_stats stats;
+        struct device           *dev;
+        struct irlap_cb         *irlap;
+        struct qos_info         qos;
+
+        iobuff_t                tx_buff;
+        iobuff_t                rx_buff;
+
+        struct work_struct      work;
+        int                     mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+        unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+        port->lsr |= (lsr & (BI|FE|PE|OE));
+        return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+        port->lsr = 0;
+        bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static void bfin_sir_hw_init(void)
+{
+#ifdef CONFIG_BFIN_SIR0
+        peripheral_request(P_UART0_TX, DRIVER_NAME);
+        peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+        SSYNC();
+}
diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h
index f3b240abf170..d80971b4e3aa 100644
--- a/include/asm-blackfin/mach-bf533/blackfin.h
+++ b/include/asm-blackfin/mach-bf533/blackfin.h
@@ -42,4 +42,19 @@
 #include "cdefBF532.h"
 #endif
 
+#define BFIN_UART_NR_PORTS      1
+
+#define OFFSET_THR              0x00    /* Transmit Holding register            */
+#define OFFSET_RBR              0x00    /* Receive Buffer register              */
+#define OFFSET_DLL              0x00    /* Divisor Latch (Low-Byte)             */
+#define OFFSET_IER              0x04    /* Interrupt Enable Register            */
+#define OFFSET_DLH              0x04    /* Divisor Latch (High-Byte)            */
+#define OFFSET_IIR              0x08    /* Interrupt Identification Register    */
+#define OFFSET_LCR              0x0C    /* Line Control Register                */
+#define OFFSET_MCR              0x10    /* Modem Control Register               */
+#define OFFSET_LSR              0x14    /* Line Status Register                 */
+#define OFFSET_MSR              0x18    /* Modem Status Register                */
+#define OFFSET_SCR              0x1C    /* SCR Scratch Register                 */
+#define OFFSET_GCTL             0x24    /* Global Control Register              */
+
 #endif                          /* _MACH_BLACKFIN_H_ */