Merge branch 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32

* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
  [AVR32] Add missing #include <linux/param.h> to delay.c
  [AVR32] Pass dev parameter to dma_cache_sync()
  [AVR32] Implement intc_get_pending()
  [AVR32] Don't include <asm/delay.h>
  [AVR32] Put the chip in "stop" mode when halting the system
  [AVR32] Set flow handler for external interrupts
  [AVR32] Remove unused file
  [AVR32] Remove mii_phy_addr and eth_addr from eth_platform_data
  [AVR32] Move ethernet tag parsing to board-specific code
  [AVR32] Add macb1 platform_device
  [AVR32] Portmux API update

4 files changed, 54 insertions, 14 deletions

diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h
new file mode 100644
index 000000000000..ba85e04553d4
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap/at32ap7000.h
@@ -0,0 +1,33 @@
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP7000_H__
+#define __ASM_ARCH_AT32AP7000_H__
+
+#define GPIO_PERIPH_A   0
+#define GPIO_PERIPH_B   1
+
+#define NR_GPIO_CONTROLLERS     4
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE  (0)
+#define GPIO_PIOB_BASE  (GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE  (GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE  (GPIO_PIOC_BASE + 32)
+
+#define GPIO_PIN_PA(N)  (GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N)  (GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N)  (GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N)  (GPIO_PIOD_BASE + (N))
+
+#endif /* __ASM_ARCH_AT32AP7000_H__ */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index a39b3e999f18..b120ee030c86 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -21,10 +21,7 @@ void at32_map_usart(unsigned int hw_id, unsigned int line);
 struct platform_device *at32_add_device_usart(unsigned int id);
 
 struct eth_platform_data {
-        u8      valid;
-        u8      mii_phy_addr;
         u8      is_rmii;
-        u8      hw_addr[6];
 };
 struct platform_device *
 at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
index 4d50421262a1..83c690571322 100644
--- a/include/asm-avr32/arch-at32ap/portmux.h
+++ b/include/asm-avr32/arch-at32ap/portmux.h
@@ -7,10 +7,20 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef __ASM_AVR32_AT32_PORTMUX_H__
-#define __ASM_AVR32_AT32_PORTMUX_H__
+#ifndef __ASM_ARCH_PORTMUX_H__
+#define __ASM_ARCH_PORTMUX_H__
 
-void portmux_set_func(unsigned int portmux_id, unsigned int pin_id,
-                      unsigned int function_id);
+/*
+ * Set up pin multiplexing, called from board init only.
+ *
+ * The following flags determine the initial state of the pin.
+ */
+#define AT32_GPIOF_PULLUP       0x00000001      /* Enable pull-up */
+#define AT32_GPIOF_OUTPUT       0x00000002      /* Enable output driver */
+#define AT32_GPIOF_HIGH         0x00000004      /* Set output high */
+
+void at32_select_periph(unsigned int pin, unsigned int periph,
+                        unsigned long flags);
+void at32_select_gpio(unsigned int pin, unsigned long flags);
 
-#endif /* __ASM_AVR32_AT32_PORTMUX_H__ */
+#endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
index 0580b5d62bba..5c01e27f0b41 100644
--- a/include/asm-avr32/dma-mapping.h
+++ b/include/asm-avr32/dma-mapping.h
@@ -109,7 +109,7 @@ static inline dma_addr_t
 dma_map_single(struct device *dev, void *cpu_addr, size_t size,
                enum dma_data_direction direction)
 {
-        dma_cache_sync(cpu_addr, size, direction);
+        dma_cache_sync(dev, cpu_addr, size, direction);
         return virt_to_bus(cpu_addr);
 }
 
@@ -211,7 +211,7 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 
                 sg[i].dma_address = page_to_bus(sg[i].page) + sg[i].offset;
                 virt = page_address(sg[i].page) + sg[i].offset;
-                dma_cache_sync(virt, sg[i].length, direction);
+                dma_cache_sync(dev, virt, sg[i].length, direction);
         }
 
         return nents;
@@ -256,14 +256,14 @@ static inline void
 dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
                         size_t size, enum dma_data_direction direction)
 {
-        dma_cache_sync(bus_to_virt(dma_handle), size, direction);
+        dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
 }
 
 static inline void
 dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
                            size_t size, enum dma_data_direction direction)
 {
-        dma_cache_sync(bus_to_virt(dma_handle), size, direction);
+        dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
 }
 
 /**
@@ -286,7 +286,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
         int i;
 
         for (i = 0; i < nents; i++) {
-                dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+                dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
                                sg[i].length, direction);
         }
 }
@@ -298,7 +298,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
         int i;
 
         for (i = 0; i < nents; i++) {
-                dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+                dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
                                sg[i].length, direction);
         }
 }