Merge branch 'omap2-upstream' into devel

11 files changed, 562 insertions, 92 deletions

diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h
index 2b1a8a4fe44e..94926090e475 100644
--- a/include/asm-arm/arch-omap/board-osk.h
+++ b/include/asm-arm/arch-omap/board-osk.h
@@ -32,5 +32,16 @@
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START             0x04800300
 
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE               (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#       define OSK_TPS_GPIO_USB_PWR_EN  (OSK_TPS_GPIO_BASE + 0)
+#       define OSK_TPS_GPIO_LED_D3      (OSK_TPS_GPIO_BASE + 1)
+#       define OSK_TPS_GPIO_LAN_RESET   (OSK_TPS_GPIO_BASE + 2)
+#       define OSK_TPS_GPIO_DSP_PWR_EN  (OSK_TPS_GPIO_BASE + 3)
+#       define OSK_TPS_GPIO_LED_D9      (OSK_TPS_GPIO_BASE + 4)
+#       define OSK_TPS_GPIO_LED_D2      (OSK_TPS_GPIO_BASE + 5)
+
 #endif /*  __ASM_ARCH_OMAP_OSK_H */
 
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index fa6881049903..57523bdb642b 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -14,6 +14,35 @@
 #define __ARCH_ARM_OMAP_CLOCK_H
 
 struct module;
+struct clk;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+struct clksel_rate {
+        u8                      div;
+        u32                     val;
+        u8                      flags;
+};
+
+struct clksel {
+        struct clk               *parent;
+        const struct clksel_rate *rates;
+};
+
+struct dpll_data {
+        void __iomem            *mult_div1_reg;
+        u32                     mult_mask;
+        u32                     div1_mask;
+#  if defined(CONFIG_ARCH_OMAP3)
+        void __iomem            *control_reg;
+        u32                     enable_mask;
+        u8                      auto_recal_bit;
+        u8                      recal_en_bit;
+        u8                      recal_st_bit;
+#  endif
+};
+
+#endif
 
 struct clk {
         struct list_head        node;
@@ -25,8 +54,6 @@ struct clk {
         __u32                   flags;
         void __iomem            *enable_reg;
         __u8                    enable_bit;
-        __u8                    rate_offset;
-        __u8                    src_offset;
         __s8                    usecount;
         void                    (*recalc)(struct clk *);
         int                     (*set_rate)(struct clk *, unsigned long);
@@ -34,6 +61,16 @@ struct clk {
         void                    (*init)(struct clk *);
         int                     (*enable)(struct clk *);
         void                    (*disable)(struct clk *);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+        u8                      fixed_div;
+        void __iomem            *clksel_reg;
+        u32                     clksel_mask;
+        const struct clksel     *clksel;
+        const struct dpll_data  *dpll_data;
+#else
+        __u8                    rate_offset;
+        __u8                    src_offset;
+#endif
 };
 
 struct clk_functions {
@@ -54,10 +91,12 @@ extern int clk_init(struct clk_functions * custom_clocks);
 extern int clk_register(struct clk *clk);
 extern void clk_unregister(struct clk *clk);
 extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
 extern void followparent_recalc(struct clk * clk);
 extern void clk_allow_idle(struct clk *clk);
 extern void clk_deny_idle(struct clk *clk);
 extern int clk_get_usecount(struct clk *clk);
+extern void clk_enable_init_clocks(void);
 
 /* Clock flags */
 #define RATE_CKCTL              (1 << 0)        /* Main fixed ratio clocks */
@@ -71,21 +110,33 @@ extern int clk_get_usecount(struct clk *clk);
 #define CLOCK_NO_IDLE_PARENT    (1 << 8)
 #define DELAYED_APP             (1 << 9)        /* Delay application of clock */
 #define CONFIG_PARTICIPANT      (1 << 10)       /* Fundamental clock */
-#define CM_MPU_SEL1             (1 << 11)       /* Domain divider/source */
-#define CM_DSP_SEL1             (1 << 12)
-#define CM_GFX_SEL1             (1 << 13)
-#define CM_MODEM_SEL1           (1 << 14)
-#define CM_CORE_SEL1            (1 << 15)       /* Sets divider for many */
-#define CM_CORE_SEL2            (1 << 16)       /* sets parent for GPT */
-#define CM_WKUP_SEL1            (1 << 17)
-#define CM_PLL_SEL1             (1 << 18)
-#define CM_PLL_SEL2             (1 << 19)
-#define CM_SYSCLKOUT_SEL1       (1 << 20)
+#define ENABLE_ON_INIT          (1 << 11)       /* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+/* bits 13-20 are currently free */
 #define CLOCK_IN_OMAP310        (1 << 21)
 #define CLOCK_IN_OMAP730        (1 << 22)
 #define CLOCK_IN_OMAP1510       (1 << 23)
 #define CLOCK_IN_OMAP16XX       (1 << 24)
 #define CLOCK_IN_OMAP242X       (1 << 25)
 #define CLOCK_IN_OMAP243X       (1 << 26)
+#define CLOCK_IN_OMAP343X       (1 << 27)       /* clocks common to all 343X */
+#define PARENT_CONTROLS_CLOCK   (1 << 28)
+#define CLOCK_IN_OMAP3430ES1    (1 << 29)       /* 3430ES1 clocks only */
+#define CLOCK_IN_OMAP3430ES2    (1 << 30)       /* 3430ES2 clocks only */
+
+/* Clksel_rate flags */
+#define DEFAULT_RATE            (1 << 0)
+#define RATE_IN_242X            (1 << 1)
+#define RATE_IN_243X            (1 << 2)
+#define RATE_IN_343X            (1 << 3)        /* rates common to all 343X */
+#define RATE_IN_3430ES2         (1 << 4)        /* 3430ES2 rates only */
+
+#define RATE_IN_24XX            (RATE_IN_242X | RATE_IN_243X)
+
+
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
+#define CORE_CLK_SRC_32K                0
+#define CORE_CLK_SRC_DPLL               1
+#define CORE_CLK_SRC_DPLL_X2            2
 
 #endif
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
new file mode 100644
index 000000000000..9944bb5d5330
--- /dev/null
+++ b/include/asm-arm/arch-omap/control.h
@@ -0,0 +1,191 @@
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
+/*
+ * include/asm-arm/arch-omap/control.h
+ *
+ * OMAP2/3 System Control Module definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#include <asm/arch/io.h>
+
+#define OMAP242X_CTRL_REGADDR(reg)                                      \
+        (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)                                      \
+        (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)                                      \
+        (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
+/*
+ * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
+ * OMAP24XX and OMAP34XX.
+ */
+
+/* Control submodule offsets */
+
+#define OMAP2_CONTROL_INTERFACE         0x000
+#define OMAP2_CONTROL_PADCONFS          0x030
+#define OMAP2_CONTROL_GENERAL           0x270
+#define OMAP343X_CONTROL_MEM_WKUP       0x600
+#define OMAP343X_CONTROL_PADCONFS_WKUP  0xa00
+#define OMAP343X_CONTROL_GENERAL_WKUP   0xa60
+
+/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
+
+#define OMAP2_CONTROL_SYSCONFIG         (OMAP2_CONTROL_INTERFACE + 0x10)
+
+/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
+#define OMAP2_CONTROL_DEVCONF0          (OMAP2_CONTROL_GENERAL + 0x0004)
+#define OMAP2_CONTROL_MSUSPENDMUX_0     (OMAP2_CONTROL_GENERAL + 0x0020)
+#define OMAP2_CONTROL_MSUSPENDMUX_1     (OMAP2_CONTROL_GENERAL + 0x0024)
+#define OMAP2_CONTROL_MSUSPENDMUX_2     (OMAP2_CONTROL_GENERAL + 0x0028)
+#define OMAP2_CONTROL_MSUSPENDMUX_3     (OMAP2_CONTROL_GENERAL + 0x002c)
+#define OMAP2_CONTROL_MSUSPENDMUX_4     (OMAP2_CONTROL_GENERAL + 0x0030)
+#define OMAP2_CONTROL_MSUSPENDMUX_5     (OMAP2_CONTROL_GENERAL + 0x0034)
+#define OMAP2_CONTROL_SEC_CTRL          (OMAP2_CONTROL_GENERAL + 0x0040)
+#define OMAP2_CONTROL_RPUB_KEY_H_0      (OMAP2_CONTROL_GENERAL + 0x0090)
+#define OMAP2_CONTROL_RPUB_KEY_H_1      (OMAP2_CONTROL_GENERAL + 0x0094)
+#define OMAP2_CONTROL_RPUB_KEY_H_2      (OMAP2_CONTROL_GENERAL + 0x0098)
+#define OMAP2_CONTROL_RPUB_KEY_H_3      (OMAP2_CONTROL_GENERAL + 0x009c)
+
+/* 242x-only CONTROL_GENERAL register offsets */
+#define OMAP242X_CONTROL_DEVCONF        OMAP2_CONTROL_DEVCONF0 /* match TRM */
+#define OMAP242X_CONTROL_OCM_RAM_PERM   (OMAP2_CONTROL_GENERAL + 0x0068)
+
+/* 243x-only CONTROL_GENERAL register offsets */
+/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
+#define OMAP243X_CONTROL_DEVCONF1       (OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP243X_CONTROL_CSIRXFE        (OMAP2_CONTROL_GENERAL + 0x007c)
+#define OMAP243X_CONTROL_IVA2_BOOTADDR  (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP243X_CONTROL_IVA2_BOOTMOD   (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP243X_CONTROL_IVA2_GEMCFG    (OMAP2_CONTROL_GENERAL + 0x0198)
+
+/* 24xx-only CONTROL_GENERAL register offsets */
+#define OMAP24XX_CONTROL_DEBOBS         (OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP24XX_CONTROL_EMU_SUPPORT    (OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP24XX_CONTROL_SEC_TEST       (OMAP2_CONTROL_GENERAL + 0x0044)
+#define OMAP24XX_CONTROL_PSA_CTRL       (OMAP2_CONTROL_GENERAL + 0x0048)
+#define OMAP24XX_CONTROL_PSA_CMD        (OMAP2_CONTROL_GENERAL + 0x004c)
+#define OMAP24XX_CONTROL_PSA_VALUE      (OMAP2_CONTROL_GENERAL + 0x0050)
+#define OMAP24XX_CONTROL_SEC_EMU        (OMAP2_CONTROL_GENERAL + 0x0060)
+#define OMAP24XX_CONTROL_SEC_TAP        (OMAP2_CONTROL_GENERAL + 0x0064)
+#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD        (OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD  (OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD   (OMAP2_CONTROL_GENERAL + 0x0074
+#define OMAP24XX_CONTROL_SEC_STATUS             (OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP24XX_CONTROL_SEC_ERR_STATUS         (OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP24XX_CONTROL_STATUS                 (OMAP2_CONTROL_GENERAL + 0x0088)
+#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c)
+#define OMAP24XX_CONTROL_RAND_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP24XX_CONTROL_RAND_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00a4)
+#define OMAP24XX_CONTROL_RAND_KEY_2     (OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP24XX_CONTROL_RAND_KEY_3     (OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP24XX_CONTROL_CUST_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP24XX_CONTROL_CUST_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP24XX_CONTROL_TEST_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00c0)
+#define OMAP24XX_CONTROL_TEST_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00c4)
+#define OMAP24XX_CONTROL_TEST_KEY_2     (OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP24XX_CONTROL_TEST_KEY_3     (OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP24XX_CONTROL_TEST_KEY_4     (OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP24XX_CONTROL_TEST_KEY_5     (OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP24XX_CONTROL_TEST_KEY_6     (OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP24XX_CONTROL_TEST_KEY_7     (OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP24XX_CONTROL_TEST_KEY_8     (OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP24XX_CONTROL_TEST_KEY_9     (OMAP2_CONTROL_GENERAL + 0x00e4)
+
+/* 34xx-only CONTROL_GENERAL register offsets */
+#define OMAP343X_CONTROL_PADCONF_OFF    (OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP343X_CONTROL_MEM_DFTRW0     (OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP343X_CONTROL_MEM_DFTRW1     (OMAP2_CONTROL_GENERAL + 0x000c)
+#define OMAP343X_CONTROL_DEVCONF1       (OMAP2_CONTROL_GENERAL + 0x0068)
+#define OMAP343X_CONTROL_CSIRXFE                (OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_SEC_STATUS             (OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS         (OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG   (OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP343X_CONTROL_STATUS                 (OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP343X_CONTROL_RPUB_KEY_H_4   (OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP343X_CONTROL_RAND_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP343X_CONTROL_RAND_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP343X_CONTROL_RAND_KEY_2     (OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP343X_CONTROL_RAND_KEY_3     (OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP343X_CONTROL_TEST_KEY_0     (OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP343X_CONTROL_TEST_KEY_1     (OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP343X_CONTROL_TEST_KEY_2     (OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP343X_CONTROL_TEST_KEY_3     (OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP343X_CONTROL_TEST_KEY_4     (OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP343X_CONTROL_TEST_KEY_5     (OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP343X_CONTROL_TEST_KEY_6     (OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP343X_CONTROL_TEST_KEY_7     (OMAP2_CONTROL_GENERAL + 0x00e4)
+#define OMAP343X_CONTROL_TEST_KEY_8     (OMAP2_CONTROL_GENERAL + 0x00e8)
+#define OMAP343X_CONTROL_TEST_KEY_9     (OMAP2_CONTROL_GENERAL + 0x00ec)
+#define OMAP343X_CONTROL_TEST_KEY_10    (OMAP2_CONTROL_GENERAL + 0x00f0)
+#define OMAP343X_CONTROL_TEST_KEY_11    (OMAP2_CONTROL_GENERAL + 0x00f4)
+#define OMAP343X_CONTROL_TEST_KEY_12    (OMAP2_CONTROL_GENERAL + 0x00f8)
+#define OMAP343X_CONTROL_TEST_KEY_13    (OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_IVA2_BOOTADDR  (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD   (OMAP2_CONTROL_GENERAL + 0x0194)
+
+/*
+ * REVISIT: This list of registers is not comprehensive - there are more
+ * that should be added.
+ */
+
+/*
+ * Control module register bit defines - these should eventually go into
+ * their own regbits file.  Some of these will be complicated, depending
+ * on the device type (general-purpose, emulator, test, secure, bad, other)
+ * and the security mode (secure, non-secure, don't care)
+ */
+/* CONTROL_DEVCONF0 bits */
+#define OMAP24XX_USBSTANDBYCTRL         (1 << 15)
+#define OMAP2_MCBSP2_CLKS_MASK          (1 << 6)
+#define OMAP2_MCBSP1_CLKS_MASK          (1 << 2)
+
+/* CONTROL_DEVCONF1 bits */
+#define OMAP2_MCBSP5_CLKS_MASK          (1 << 4) /* > 242x */
+#define OMAP2_MCBSP4_CLKS_MASK          (1 << 2) /* > 242x */
+#define OMAP2_MCBSP3_CLKS_MASK          (1 << 0) /* > 242x */
+
+/* CONTROL_STATUS bits */
+#define OMAP2_DEVICETYPE_MASK           (0x7 << 8)
+#define OMAP2_SYSBOOT_5_MASK            (1 << 5)
+#define OMAP2_SYSBOOT_4_MASK            (1 << 4)
+#define OMAP2_SYSBOOT_3_MASK            (1 << 3)
+#define OMAP2_SYSBOOT_2_MASK            (1 << 2)
+#define OMAP2_SYSBOOT_1_MASK            (1 << 1)
+#define OMAP2_SYSBOOT_0_MASK            (1 << 0)
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+extern void omap_ctrl_base_set(u32 base);
+extern u32 omap_ctrl_base_get(void);
+extern u8 omap_ctrl_readb(u16 offset);
+extern u16 omap_ctrl_readw(u16 offset);
+extern u32 omap_ctrl_readl(u16 offset);
+extern void omap_ctrl_writeb(u8 val, u16 offset);
+extern void omap_ctrl_writew(u16 val, u16 offset);
+extern void omap_ctrl_writel(u32 val, u16 offset);
+#else
+#define omap_ctrl_base_set(x)           WARN_ON(1)
+#define omap_ctrl_base_get()            0
+#define omap_ctrl_readb(x)              0
+#define omap_ctrl_readw(x)              0
+#define omap_ctrl_readl(x)              0
+#define omap_ctrl_writeb(x, y)          WARN_ON(1)
+#define omap_ctrl_writew(x, y)          WARN_ON(1)
+#define omap_ctrl_writel(x, y)          WARN_ON(1)
+#endif
+#endif  /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_CONTROL_H */
+
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index f6967c8df323..74cd57221c8e 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -68,7 +68,7 @@
                 .endm
 
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \base, =VA_IC_BASE
+                ldr     \base, =OMAP2_VA_IC_BASE
                 ldr     \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
                 cmp     \irqnr, #0x0
                 bne     2222f
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index 164da09be095..86621a04cd8f 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -82,62 +82,35 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable);
 
 /*-------------------------------------------------------------------------*/
 
-/* wrappers for "new style" GPIO calls. the old OMAP-specfic ones should
- * eventually be removed (along with this errno.h inclusion), and maybe
- * gpios should put MPUIOs last too.
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specfic calls should eventually be removed.
  */
 
-#include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-        return omap_request_gpio(gpio);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-        omap_free_gpio(gpio);
-}
-
-static inline int __gpio_set_direction(unsigned gpio, int is_input)
-{
-        if (cpu_class_is_omap2()) {
-                if (gpio > OMAP_MAX_GPIO_LINES)
-                        return -EINVAL;
-        } else {
-                if (gpio > (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */))
-                        return -EINVAL;
-        }
-        omap_set_gpio_direction(gpio, is_input);
-        return 0;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-        return __gpio_set_direction(gpio, 1);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-        omap_set_gpio_dataout(gpio, value);
-        return __gpio_set_direction(gpio, 0);
-}
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
 
 static inline int gpio_get_value(unsigned gpio)
 {
-        return omap_get_gpio_datain(gpio);
+        return __gpio_get_value(gpio);
 }
 
 static inline void gpio_set_value(unsigned gpio, int value)
 {
-        omap_set_gpio_dataout(gpio, value);
+        __gpio_set_value(gpio, value);
 }
 
-#include <asm-generic/gpio.h>           /* cansleep wrappers */
+static inline int gpio_cansleep(unsigned gpio)
+{
+        return __gpio_cansleep(gpio);
+}
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-        return OMAP_GPIO_IRQ(gpio);
+        if (gpio < (OMAP_MAX_GPIO_LINES + 16))
+                return OMAP_GPIO_IRQ(gpio);
+        return -EINVAL;
 }
 
 static inline int irq_to_gpio(unsigned irq)
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 289082d07f14..160578e1f557 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -80,6 +80,13 @@
 #define OMAP243X_GPMC_PHYS      OMAP243X_GPMC_BASE      /* 0x49000000 */
 #define OMAP243X_GPMC_VIRT      0xFE000000
 #define OMAP243X_GPMC_SIZE      SZ_1M
+#define OMAP243X_SDRC_PHYS      OMAP243X_SDRC_BASE
+#define OMAP243X_SDRC_VIRT      0xFD000000
+#define OMAP243X_SDRC_SIZE      SZ_1M
+#define OMAP243X_SMS_PHYS       OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT       0xFC000000
+#define OMAP243X_SMS_SIZE       SZ_1M
+
 #endif
 
 #define IO_OFFSET       0x90000000
@@ -88,16 +95,73 @@
 #define io_v2p(va)      ((va) - IO_OFFSET)      /* Works for L3 and L4 */
 
 /* DSP */
-#define DSP_MEM_24XX_PHYS       OMAP24XX_DSP_MEM_BASE   /* 0x58000000 */
+#define DSP_MEM_24XX_PHYS       OMAP2420_DSP_MEM_BASE   /* 0x58000000 */
 #define DSP_MEM_24XX_VIRT       0xe0000000
 #define DSP_MEM_24XX_SIZE       0x28000
-#define DSP_IPI_24XX_PHYS       OMAP24XX_DSP_IPI_BASE   /* 0x59000000 */
+#define DSP_IPI_24XX_PHYS       OMAP2420_DSP_IPI_BASE   /* 0x59000000 */
 #define DSP_IPI_24XX_VIRT       0xe1000000
 #define DSP_IPI_24XX_SIZE       SZ_4K
-#define DSP_MMU_24XX_PHYS       OMAP24XX_DSP_MMU_BASE   /* 0x5a000000 */
+#define DSP_MMU_24XX_PHYS       OMAP2420_DSP_MMU_BASE   /* 0x5a000000 */
 #define DSP_MMU_24XX_VIRT       0xe2000000
 #define DSP_MMU_24XX_SIZE       SZ_4K
 
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS            L3_34XX_BASE    /* 0x68000000 */
+#define L3_34XX_VIRT            0xf8000000
+#define L3_34XX_SIZE            SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS            L4_34XX_BASE    /* 0x48000000 */
+#define L4_34XX_VIRT            0xd8000000
+#define L4_34XX_SIZE            SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS         L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT         0xd8300000
+#define L4_WK_34XX_SIZE         SZ_1M
+
+#define L4_PER_34XX_PHYS        L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT        0xd9000000
+#define L4_PER_34XX_SIZE        SZ_1M
+
+#define L4_EMU_34XX_PHYS        L4_EMU_34XX_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT        0xe4000000
+#define L4_EMU_34XX_SIZE        SZ_64M
+
+#define OMAP34XX_GPMC_PHYS      OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT      0xFE000000
+#define OMAP34XX_GPMC_SIZE      SZ_1M
+
+#define OMAP343X_SMS_PHYS       OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT       0xFC000000
+#define OMAP343X_SMS_SIZE       SZ_1M
+
+#define OMAP343X_SDRC_PHYS      OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT      0xFD000000
+#define OMAP343X_SDRC_SIZE      SZ_1M
+
+
+#define IO_OFFSET               0x90000000
+#define IO_ADDRESS(pa)          ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa)              ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)              ((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS       OMAP34XX_DSP_MEM_BASE   /* 0x58000000 */
+#define DSP_MEM_34XX_VIRT       0xe0000000
+#define DSP_MEM_34XX_SIZE       0x28000
+#define DSP_IPI_34XX_PHYS       OMAP34XX_DSP_IPI_BASE   /* 0x59000000 */
+#define DSP_IPI_34XX_VIRT       0xe1000000
+#define DSP_IPI_34XX_SIZE       SZ_4K
+#define DSP_MMU_34XX_PHYS       OMAP34XX_DSP_MMU_BASE   /* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT       0xe2000000
+#define DSP_MMU_34XX_SIZE       SZ_4K
+
 #endif
 
 #ifndef __ASSEMBLER__
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index b8fff50e6a87..ff9a5b5575fd 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -4,9 +4,10 @@
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,14 +28,6 @@
  *       - W8        = ball
  *       - 1610      = 1510 or 1610, none if common for both 1510 and 1610
  *       - MMC2_DAT0 = function
- *
- * Change log:
- *   Added entry for the I2C interface. (02Feb 2004)
- *   Copyright (C) 2004 Texas Instruments
- *
- *   Added entry for the keypad and uwire CS1. (09Mar 2004)
- *   Copyright (C) 2004 Texas Instruments
- *
  */
 
 #ifndef __ASM_ARCH_MUX_H
@@ -469,7 +462,12 @@ enum omap24xx_index {
         AA8_242X_GPIO58,
         Y20_24XX_GPIO60,
         W4__24XX_GPIO74,
+        N15_24XX_GPIO85,
         M15_24XX_GPIO92,
+        P20_24XX_GPIO93,
+        P18_24XX_GPIO95,
+        M18_24XX_GPIO96,
+        L14_24XX_GPIO97,
         J15_24XX_GPIO99,
         V14_24XX_GPIO117,
         P14_24XX_GPIO125,
@@ -494,8 +492,6 @@ enum omap24xx_index {
         D3_242X_DMAREQ4,
         E3_242X_DMAREQ5,
 
-        P20_24XX_TSC_IRQ,
-
         /* UART3 */
         K15_24XX_UART3_TX,
         K14_24XX_UART3_RX,
@@ -557,13 +553,57 @@ enum omap24xx_index {
         B3__24XX_KBR5,
         AA4_24XX_KBC2,
         B13_24XX_KBC6,
+
+        /* 2430 USB */
+        AD9_2430_USB0_PUEN,
+        Y11_2430_USB0_VP,
+        AD7_2430_USB0_VM,
+        AE7_2430_USB0_RCV,
+        AD4_2430_USB0_TXEN,
+        AF9_2430_USB0_SE0,
+        AE6_2430_USB0_DAT,
+        AD24_2430_USB1_SE0,
+        AB24_2430_USB1_RCV,
+        Y25_2430_USB1_TXEN,
+        AA26_2430_USB1_DAT,
+
+        /* 2430 HS-USB */
+        AD9_2430_USB0HS_DATA3,
+        Y11_2430_USB0HS_DATA4,
+        AD7_2430_USB0HS_DATA5,
+        AE7_2430_USB0HS_DATA6,
+        AD4_2430_USB0HS_DATA2,
+        AF9_2430_USB0HS_DATA0,
+        AE6_2430_USB0HS_DATA1,
+        AE8_2430_USB0HS_CLK,
+        AD8_2430_USB0HS_DIR,
+        AE5_2430_USB0HS_STP,
+        AE9_2430_USB0HS_NXT,
+        AC7_2430_USB0HS_DATA7,
+
+        /* 2430 McBSP */
+        AC10_2430_MCBSP2_FSX,
+        AD16_2430_MCBSP2_CLX,
+        AE13_2430_MCBSP2_DX,
+        AD13_2430_MCBSP2_DR,
+        AC10_2430_MCBSP2_FSX_OFF,
+        AD16_2430_MCBSP2_CLX_OFF,
+        AE13_2430_MCBSP2_DX_OFF,
+        AD13_2430_MCBSP2_DR_OFF,
+
+};
+
+struct omap_mux_cfg {
+        struct pin_config       *pins;
+        unsigned long           size;
+        int                     (*cfg_reg)(const struct pin_config *cfg);
 };
 
 #ifdef  CONFIG_OMAP_MUX
 /* setup pin muxing in Linux */
 extern int omap1_mux_init(void);
 extern int omap2_mux_init(void);
-extern int omap_mux_register(struct pin_config * pins, unsigned long size);
+extern int omap_mux_register(struct omap_mux_cfg *);
 extern int omap_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
index 14c0f9496579..b9fcaae287c8 100644
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ b/include/asm-arm/arch-omap/omap24xx.h
@@ -1,3 +1,28 @@
+/*
+ * include/asm-arm/arch-omap/omap24xx.h
+ *
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
 #ifndef __ASM_ARCH_OMAP24XX_H
 #define __ASM_ARCH_OMAP24XX_H
 
@@ -13,33 +38,70 @@
 
 /* interrupt controller */
 #define OMAP24XX_IC_BASE        (L4_24XX_BASE + 0xfe000)
-#define VA_IC_BASE              IO_ADDRESS(OMAP24XX_IC_BASE)
 #define OMAP24XX_IVA_INTC_BASE  0x40000000
 #define IRQ_SIR_IRQ             0x0040
 
-#ifdef CONFIG_ARCH_OMAP2420
-#define OMAP24XX_32KSYNCT_BASE  (L4_24XX_BASE + 0x4000)
-#define OMAP24XX_PRCM_BASE      (L4_24XX_BASE + 0x8000)
-#define OMAP24XX_SDRC_BASE      (L3_24XX_BASE + 0x9000)
-#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8)
-#endif
+#define OMAP2420_CTRL_BASE      L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE  (L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE      (L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE        (L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE       OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE      (L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE       0x68008000
 
-#ifdef CONFIG_ARCH_OMAP2430
-#define OMAP24XX_32KSYNCT_BASE  (L4_WK_243X_BASE + 0x20000)
-#define OMAP24XX_PRCM_BASE      (L4_WK_243X_BASE + 0x6000)
-#define OMAP24XX_SDRC_BASE      (0x6D000000)
-#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8)
+#define OMAP2430_32KSYNCT_BASE  (L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE      (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE        (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE       OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE       0x6C000000
+#define OMAP243X_SDRC_BASE      0x6D000000
 #define OMAP243X_GPMC_BASE      0x6E000000
-#endif
+#define OMAP243X_SCM_BASE       (L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE      OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE        (L4_24XX_BASE + 0x000ac000)
 
 /* DSP SS */
-#define OMAP24XX_DSP_BASE       0x58000000
-#define OMAP24XX_DSP_MEM_BASE   (OMAP24XX_DSP_BASE + 0x0)
-#define OMAP24XX_DSP_IPI_BASE   (OMAP24XX_DSP_BASE + 0x1000000)
-#define OMAP24XX_DSP_MMU_BASE   (OMAP24XX_DSP_BASE + 0x2000000)
+#define OMAP2420_DSP_BASE       0x58000000
+#define OMAP2420_DSP_MEM_BASE   (OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE   (OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE   (OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE       0x5C000000
+#define OMAP243X_DSP_MEM_BASE   (OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE   (OMAP243X_DSP_BASE + 0x1000000)
 
 /* Mailbox */
 #define OMAP24XX_MAILBOX_BASE   (L4_24XX_BASE + 0x94000)
 
+/* Camera */
+#define OMAP24XX_CAMERA_BASE    (L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE       (L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE   (OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE   (OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE   (OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE   (OMAP24XX_SEC_BASE + 0x8000)
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+#define OMAP2_32KSYNCT_BASE     OMAP2420_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE         OMAP2420_PRCM_BASE
+#define OMAP2_CM_BASE           OMAP2420_CM_BASE
+#define OMAP2_PRM_BASE          OMAP2420_PRM_BASE
+#define OMAP2_VA_IC_BASE        IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#elif defined(CONFIG_ARCH_OMAP2430)
+
+#define OMAP2_32KSYNCT_BASE     OMAP2430_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE         OMAP2430_PRCM_BASE
+#define OMAP2_CM_BASE           OMAP2430_CM_BASE
+#define OMAP2_PRM_BASE          OMAP2430_PRM_BASE
+#define OMAP2_VA_IC_BASE        IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#endif
+
 #endif /* __ASM_ARCH_OMAP24XX_H */
 
diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h
new file mode 100644
index 000000000000..673b3965befc
--- /dev/null
+++ b/include/asm-arm/arch-omap/sdrc.h
@@ -0,0 +1,75 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/arch/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG          0x010
+#define SDRC_DLLA_CTRL          0x060
+#define SDRC_DLLA_STATUS        0x064
+#define SDRC_DLLB_CTRL          0x068
+#define SDRC_DLLB_STATUS        0x06C
+#define SDRC_POWER              0x070
+#define SDRC_MR_0               0x084
+#define SDRC_RFR_CTRL_0         0x0a4
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+
+#define OMAP242X_SMS_REGADDR(reg)       (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)       (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)       (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG           0x010
+/* REVISIT: fill in other SMS registers here */
+
+#endif
diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
index 99ae9eabaf71..2147d18aaeae 100644
--- a/include/asm-arm/arch-omap/usb.h
+++ b/include/asm-arm/arch-omap/usb.h
@@ -132,14 +132,11 @@
 #       define  CONF_USB_PWRDN_DP_R     (1 << 1)
 
 /* OMAP2 */
-#define CONTROL_DEVCONF_REG             __REG32(L4_24XX_BASE + 0x0274)
 #       define  USB_UNIDIR                      0x0
 #       define  USB_UNIDIR_TLL                  0x1
 #       define  USB_BIDIR                       0x2
 #       define  USB_BIDIR_TLL                   0x3
-#       define  USBT0WRMODEI(x)         ((x) << 22)
-#       define  USBT1WRMODEI(x)         ((x) << 20)
-#       define  USBT2WRMODEI(x)         ((x) << 18)
+#       define  USBTXWRMODEI(port, x)   ((x) << (22 - (port * 2)))
 #       define  USBT2TLL5PI             (1 << 17)
 #       define  USB0PUENACTLOI          (1 << 16)
 #       define  USBSTANDBYCTRL          (1 << 15)
diff --git a/include/asm-arm/kvm.h b/include/asm-arm/kvm.h
new file mode 100644
index 000000000000..cb3c08cbcb9e
--- /dev/null
+++ b/include/asm-arm/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_ARM_H
+#define __LINUX_KVM_ARM_H
+
+/* arm does not support KVM */
+
+#endif