[ARM] pxa: move SSP register definitions from pxa-regs.h to regs-ssp.h

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 174 insertions, 167 deletions

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 1bd398da07da..dd014712dfa5 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1597,176 +1597,10 @@
 #define PWER_GPIO15     PWER_GPIO (15)  /* GPIO [15] wake-up enable        */
 #define PWER_RTC        0x80000000      /* RTC alarm wake-up enable        */
 
-
 /*
- * SSP Serial Port Registers
- * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
- * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
  */
 
- /* Common PXA2xx bits first */
-#define SSCR0_DSS       (0x0000000f)    /* Data Size Select (mask) */
-#define SSCR0_DataSize(x)  ((x) - 1)    /* Data Size Select [4..16] */
-#define SSCR0_FRF       (0x00000030)    /* FRame Format (mask) */
-#define SSCR0_Motorola  (0x0 << 4)      /* Motorola's Serial Peripheral Interface (SPI) */
-#define SSCR0_TI        (0x1 << 4)      /* Texas Instruments' Synchronous Serial Protocol (SSP) */
-#define SSCR0_National  (0x2 << 4)      /* National Microwire */
-#define SSCR0_ECS       (1 << 6)        /* External clock select */
-#define SSCR0_SSE       (1 << 7)        /* Synchronous Serial Port Enable */
-#if defined(CONFIG_PXA25x)
-#define SSCR0_SCR       (0x0000ff00)    /* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-#elif defined(CONFIG_PXA27x)
-#define SSCR0_SCR       (0x000fff00)    /* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
-#define SSCR0_EDSS      (1 << 20)       /* Extended data size select */
-#define SSCR0_NCS       (1 << 21)       /* Network clock select */
-#define SSCR0_RIM       (1 << 22)       /* Receive FIFO overrrun interrupt mask */
-#define SSCR0_TUM       (1 << 23)       /* Transmit FIFO underrun interrupt mask */
-#define SSCR0_FRDC      (0x07000000)    /* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)  /* Time slots per frame [1..8] */
-#define SSCR0_ADC       (1 << 30)       /* Audio clock select */
-#define SSCR0_MOD       (1 << 31)       /* Mode (normal or network) */
-#endif
-
-#define SSCR1_RIE       (1 << 0)        /* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE       (1 << 1)        /* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM       (1 << 2)        /* Loop-Back Mode */
-#define SSCR1_SPO       (1 << 3)        /* Motorola SPI SSPSCLK polarity setting */
-#define SSCR1_SPH       (1 << 4)        /* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS      (1 << 5)        /* Microwire Transmit Data Size */
-#define SSCR1_TFT       (0x000003c0)    /* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT       (0x00003c00)    /* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
-
-#define SSSR_TNF        (1 << 2)        /* Transmit FIFO Not Full */
-#define SSSR_RNE        (1 << 3)        /* Receive FIFO Not Empty */
-#define SSSR_BSY        (1 << 4)        /* SSP Busy */
-#define SSSR_TFS        (1 << 5)        /* Transmit FIFO Service Request */
-#define SSSR_RFS        (1 << 6)        /* Receive FIFO Service Request */
-#define SSSR_ROR        (1 << 7)        /* Receive FIFO Overrun */
-
-#define SSCR0_TIM               (1 << 23)       /* Transmit FIFO Under Run Interrupt Mask */
-#define SSCR0_RIM               (1 << 22)       /* Receive FIFO Over Run interrupt Mask */
-#define SSCR0_NCS               (1 << 21)       /* Network Clock Select */
-#define SSCR0_EDSS              (1 << 20)       /* Extended Data Size Select */
-
-/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
-#define SSCR0_TISSP             (1 << 4)        /* TI Sync Serial Protocol */
-#define SSCR0_PSP               (3 << 4)        /* PSP - Programmable Serial Protocol */
-#define SSCR1_TTELP             (1 << 31)       /* TXD Tristate Enable Last Phase */
-#define SSCR1_TTE               (1 << 30)       /* TXD Tristate Enable */
-#define SSCR1_EBCEI             (1 << 29)       /* Enable Bit Count Error interrupt */
-#define SSCR1_SCFR              (1 << 28)       /* Slave Clock free Running */
-#define SSCR1_ECRA              (1 << 27)       /* Enable Clock Request A */
-#define SSCR1_ECRB              (1 << 26)       /* Enable Clock request B */
-#define SSCR1_SCLKDIR   (1 << 25)       /* Serial Bit Rate Clock Direction */
-#define SSCR1_SFRMDIR   (1 << 24)       /* Frame Direction */
-#define SSCR1_RWOT              (1 << 23)       /* Receive Without Transmit */
-#define SSCR1_TRAIL             (1 << 22)       /* Trailing Byte */
-#define SSCR1_TSRE              (1 << 21)       /* Transmit Service Request Enable */
-#define SSCR1_RSRE              (1 << 20)       /* Receive Service Request Enable */
-#define SSCR1_TINTE             (1 << 19)       /* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE             (1 << 18)       /* Peripheral Trailing Byte Interupt Enable */
-#define SSCR1_STRF              (1 << 15)       /* Select FIFO or EFWR */
-#define SSCR1_EFWR              (1 << 14)       /* Enable FIFO Write/Read */
-
-#define SSSR_BCE                (1 << 23)       /* Bit Count Error */
-#define SSSR_CSS                (1 << 22)       /* Clock Synchronisation Status */
-#define SSSR_TUR                (1 << 21)       /* Transmit FIFO Under Run */
-#define SSSR_EOC                (1 << 20)       /* End Of Chain */
-#define SSSR_TINT               (1 << 19)       /* Receiver Time-out Interrupt */
-#define SSSR_PINT               (1 << 18)       /* Peripheral Trailing Byte Interrupt */
-
-#define SSPSP_FSRT              (1 << 25)       /* Frame Sync Relative Timing */
-#define SSPSP_DMYSTOP(x)        ((x) << 23)     /* Dummy Stop */
-#define SSPSP_SFRMWDTH(x)       ((x) << 16)     /* Serial Frame Width */
-#define SSPSP_SFRMDLY(x)        ((x) << 9)      /* Serial Frame Delay */
-#define SSPSP_DMYSTRT(x)        ((x) << 7)      /* Dummy Start */
-#define SSPSP_STRTDLY(x)        ((x) << 4)      /* Start Delay */
-#define SSPSP_ETDS                      (1 << 3)        /* End of Transfer data State */
-#define SSPSP_SFRMP                     (1 << 2)        /* Serial Frame Polarity */
-#define SSPSP_SCMODE(x)         ((x) << 0)      /* Serial Bit Rate Clock Mode */
-
-#define SSACD_SCDB              (1 << 3)        /* SSPSYSCLK Divider Bypass */
-#define SSACD_ACPS(x)           ((x) << 4)      /* Audio clock PLL select */
-#define SSACD_ACDS(x)           ((x) << 0)      /* Audio clock divider select */
-
-#define SSCR0_P1        __REG(0x41000000)  /* SSP Port 1 Control Register 0 */
-#define SSCR1_P1        __REG(0x41000004)  /* SSP Port 1 Control Register 1 */
-#define SSSR_P1         __REG(0x41000008)  /* SSP Port 1 Status Register */
-#define SSITR_P1        __REG(0x4100000C)  /* SSP Port 1 Interrupt Test Register */
-#define SSDR_P1         __REG(0x41000010)  /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */
-
-/* Support existing PXA25x drivers */
-#define SSCR0           SSCR0_P1  /* SSP Control Register 0 */
-#define SSCR1           SSCR1_P1  /* SSP Control Register 1 */
-#define SSSR            SSSR_P1   /* SSP Status Register */
-#define SSITR           SSITR_P1  /* SSP Interrupt Test Register */
-#define SSDR            SSDR_P1   /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
-
-/* PXA27x ports */
-#if defined (CONFIG_PXA27x)
-#define SSTO_P1         __REG(0x41000028)  /* SSP Port 1 Time Out Register */
-#define SSPSP_P1        __REG(0x4100002C)  /* SSP Port 1 Programmable Serial Protocol */
-#define SSTSA_P1        __REG(0x41000030)  /* SSP Port 1 Tx Timeslot Active */
-#define SSRSA_P1        __REG(0x41000034)  /* SSP Port 1 Rx Timeslot Active */
-#define SSTSS_P1        __REG(0x41000038)  /* SSP Port 1 Timeslot Status */
-#define SSACD_P1        __REG(0x4100003C)  /* SSP Port 1 Audio Clock Divider */
-#define SSCR0_P2        __REG(0x41700000)  /* SSP Port 2 Control Register 0 */
-#define SSCR1_P2        __REG(0x41700004)  /* SSP Port 2 Control Register 1 */
-#define SSSR_P2         __REG(0x41700008)  /* SSP Port 2 Status Register */
-#define SSITR_P2        __REG(0x4170000C)  /* SSP Port 2 Interrupt Test Register */
-#define SSDR_P2         __REG(0x41700010)  /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
-#define SSTO_P2         __REG(0x41700028)  /* SSP Port 2 Time Out Register */
-#define SSPSP_P2        __REG(0x4170002C)  /* SSP Port 2 Programmable Serial Protocol */
-#define SSTSA_P2        __REG(0x41700030)  /* SSP Port 2 Tx Timeslot Active */
-#define SSRSA_P2        __REG(0x41700034)  /* SSP Port 2 Rx Timeslot Active */
-#define SSTSS_P2        __REG(0x41700038)  /* SSP Port 2 Timeslot Status */
-#define SSACD_P2        __REG(0x4170003C)  /* SSP Port 2 Audio Clock Divider */
-#define SSCR0_P3        __REG(0x41900000)  /* SSP Port 3 Control Register 0 */
-#define SSCR1_P3        __REG(0x41900004)  /* SSP Port 3 Control Register 1 */
-#define SSSR_P3         __REG(0x41900008)  /* SSP Port 3 Status Register */
-#define SSITR_P3        __REG(0x4190000C)  /* SSP Port 3 Interrupt Test Register */
-#define SSDR_P3         __REG(0x41900010)  /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
-#define SSTO_P3         __REG(0x41900028)  /* SSP Port 3 Time Out Register */
-#define SSPSP_P3        __REG(0x4190002C)  /* SSP Port 3 Programmable Serial Protocol */
-#define SSTSA_P3        __REG(0x41900030)  /* SSP Port 3 Tx Timeslot Active */
-#define SSRSA_P3        __REG(0x41900034)  /* SSP Port 3 Rx Timeslot Active */
-#define SSTSS_P3        __REG(0x41900038)  /* SSP Port 3 Timeslot Status */
-#define SSACD_P3        __REG(0x4190003C)  /* SSP Port 3 Audio Clock Divider */
-#else /* PXA255 (only port 2) and PXA26x ports*/
-#define SSTO_P1         __REG(0x41000028)  /* SSP Port 1 Time Out Register */
-#define SSPSP_P1        __REG(0x4100002C)  /* SSP Port 1 Programmable Serial Protocol */
-#define SSCR0_P2        __REG(0x41400000)  /* SSP Port 2 Control Register 0 */
-#define SSCR1_P2        __REG(0x41400004)  /* SSP Port 2 Control Register 1 */
-#define SSSR_P2         __REG(0x41400008)  /* SSP Port 2 Status Register */
-#define SSITR_P2        __REG(0x4140000C)  /* SSP Port 2 Interrupt Test Register */
-#define SSDR_P2         __REG(0x41400010)  /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
-#define SSTO_P2         __REG(0x41400028)  /* SSP Port 2 Time Out Register */
-#define SSPSP_P2        __REG(0x4140002C)  /* SSP Port 2 Programmable Serial Protocol */
-#define SSCR0_P3        __REG(0x41500000)  /* SSP Port 3 Control Register 0 */
-#define SSCR1_P3        __REG(0x41500004)  /* SSP Port 3 Control Register 1 */
-#define SSSR_P3         __REG(0x41500008)  /* SSP Port 3 Status Register */
-#define SSITR_P3        __REG(0x4150000C)  /* SSP Port 3 Interrupt Test Register */
-#define SSDR_P3         __REG(0x41500010)  /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
-#define SSTO_P3         __REG(0x41500028)  /* SSP Port 3 Time Out Register */
-#define SSPSP_P3        __REG(0x4150002C)  /* SSP Port 3 Programmable Serial Protocol */
-#endif
-
-#define SSCR0_P(x) (*(((x) == 1) ? &SSCR0_P1 : ((x) == 2) ? &SSCR0_P2 : ((x) == 3) ? &SSCR0_P3 : NULL))
-#define SSCR1_P(x) (*(((x) == 1) ? &SSCR1_P1 : ((x) == 2) ? &SSCR1_P2 : ((x) == 3) ? &SSCR1_P3 : NULL))
-#define SSSR_P(x) (*(((x) == 1) ? &SSSR_P1 : ((x) == 2) ? &SSSR_P2 : ((x) == 3) ? &SSSR_P3 : NULL))
-#define SSITR_P(x) (*(((x) == 1) ? &SSITR_P1 : ((x) == 2) ? &SSITR_P2 : ((x) == 3) ? &SSITR_P3 : NULL))
-#define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL))
-#define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
-#define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
-#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL))
-#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL))
-#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL))
-#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL))
-
 /*
  * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
  */
diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h
new file mode 100644
index 000000000000..687ade109113
--- /dev/null
+++ b/include/asm-arm/arch-pxa/regs-ssp.h
@@ -0,0 +1,173 @@
+#ifndef __ASM_ARCH_REGS_SSP_H
+#define __ASM_ARCH_REGS_SSP_H
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+ /* Common PXA2xx bits first */
+#define SSCR0_DSS       (0x0000000f)    /* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)    /* Data Size Select [4..16] */
+#define SSCR0_FRF       (0x00000030)    /* FRame Format (mask) */
+#define SSCR0_Motorola  (0x0 << 4)      /* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI        (0x1 << 4)      /* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National  (0x2 << 4)      /* National Microwire */
+#define SSCR0_ECS       (1 << 6)        /* External clock select */
+#define SSCR0_SSE       (1 << 7)        /* Synchronous Serial Port Enable */
+#if defined(CONFIG_PXA25x)
+#define SSCR0_SCR       (0x0000ff00)    /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
+#elif defined(CONFIG_PXA27x)
+#define SSCR0_SCR       (0x000fff00)    /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#define SSCR0_EDSS      (1 << 20)       /* Extended data size select */
+#define SSCR0_NCS       (1 << 21)       /* Network clock select */
+#define SSCR0_RIM       (1 << 22)       /* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM       (1 << 23)       /* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC      (0x07000000)    /* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)  /* Time slots per frame [1..8] */
+#define SSCR0_ADC       (1 << 30)       /* Audio clock select */
+#define SSCR0_MOD       (1 << 31)       /* Mode (normal or network) */
+#endif
+
+#define SSCR1_RIE       (1 << 0)        /* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE       (1 << 1)        /* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM       (1 << 2)        /* Loop-Back Mode */
+#define SSCR1_SPO       (1 << 3)        /* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH       (1 << 4)        /* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS      (1 << 5)        /* Microwire Transmit Data Size */
+#define SSCR1_TFT       (0x000003c0)    /* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT       (0x00003c00)    /* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF        (1 << 2)        /* Transmit FIFO Not Full */
+#define SSSR_RNE        (1 << 3)        /* Receive FIFO Not Empty */
+#define SSSR_BSY        (1 << 4)        /* SSP Busy */
+#define SSSR_TFS        (1 << 5)        /* Transmit FIFO Service Request */
+#define SSSR_RFS        (1 << 6)        /* Receive FIFO Service Request */
+#define SSSR_ROR        (1 << 7)        /* Receive FIFO Overrun */
+
+#define SSCR0_TIM               (1 << 23)       /* Transmit FIFO Under Run Interrupt Mask */
+#define SSCR0_RIM               (1 << 22)       /* Receive FIFO Over Run interrupt Mask */
+#define SSCR0_NCS               (1 << 21)       /* Network Clock Select */
+#define SSCR0_EDSS              (1 << 20)       /* Extended Data Size Select */
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP             (1 << 4)        /* TI Sync Serial Protocol */
+#define SSCR0_PSP               (3 << 4)        /* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP             (1 << 31)       /* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE               (1 << 30)       /* TXD Tristate Enable */
+#define SSCR1_EBCEI             (1 << 29)       /* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR              (1 << 28)       /* Slave Clock free Running */
+#define SSCR1_ECRA              (1 << 27)       /* Enable Clock Request A */
+#define SSCR1_ECRB              (1 << 26)       /* Enable Clock request B */
+#define SSCR1_SCLKDIR           (1 << 25)       /* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR           (1 << 24)       /* Frame Direction */
+#define SSCR1_RWOT              (1 << 23)       /* Receive Without Transmit */
+#define SSCR1_TRAIL             (1 << 22)       /* Trailing Byte */
+#define SSCR1_TSRE              (1 << 21)       /* Transmit Service Request Enable */
+#define SSCR1_RSRE              (1 << 20)       /* Receive Service Request Enable */
+#define SSCR1_TINTE             (1 << 19)       /* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE             (1 << 18)       /* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_STRF              (1 << 15)       /* Select FIFO or EFWR */
+#define SSCR1_EFWR              (1 << 14)       /* Enable FIFO Write/Read */
+
+#define SSSR_BCE                (1 << 23)       /* Bit Count Error */
+#define SSSR_CSS                (1 << 22)       /* Clock Synchronisation Status */
+#define SSSR_TUR                (1 << 21)       /* Transmit FIFO Under Run */
+#define SSSR_EOC                (1 << 20)       /* End Of Chain */
+#define SSSR_TINT               (1 << 19)       /* Receiver Time-out Interrupt */
+#define SSSR_PINT               (1 << 18)       /* Peripheral Trailing Byte Interrupt */
+
+#define SSPSP_FSRT              (1 << 25)       /* Frame Sync Relative Timing */
+#define SSPSP_DMYSTOP(x)        ((x) << 23)     /* Dummy Stop */
+#define SSPSP_SFRMWDTH(x)       ((x) << 16)     /* Serial Frame Width */
+#define SSPSP_SFRMDLY(x)        ((x) << 9)      /* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x)        ((x) << 7)      /* Dummy Start */
+#define SSPSP_STRTDLY(x)        ((x) << 4)      /* Start Delay */
+#define SSPSP_ETDS              (1 << 3)        /* End of Transfer data State */
+#define SSPSP_SFRMP             (1 << 2)        /* Serial Frame Polarity */
+#define SSPSP_SCMODE(x)         ((x) << 0)      /* Serial Bit Rate Clock Mode */
+
+#define SSACD_SCDB              (1 << 3)        /* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)           ((x) << 4)      /* Audio clock PLL select */
+#define SSACD_ACDS(x)           ((x) << 0)      /* Audio clock divider select */
+
+#define SSCR0_P1        __REG(0x41000000)  /* SSP Port 1 Control Register 0 */
+#define SSCR1_P1        __REG(0x41000004)  /* SSP Port 1 Control Register 1 */
+#define SSSR_P1         __REG(0x41000008)  /* SSP Port 1 Status Register */
+#define SSITR_P1        __REG(0x4100000C)  /* SSP Port 1 Interrupt Test Register */
+#define SSDR_P1         __REG(0x41000010)  /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */
+
+/* Support existing PXA25x drivers */
+#define SSCR0           SSCR0_P1  /* SSP Control Register 0 */
+#define SSCR1           SSCR1_P1  /* SSP Control Register 1 */
+#define SSSR            SSSR_P1   /* SSP Status Register */
+#define SSITR           SSITR_P1  /* SSP Interrupt Test Register */
+#define SSDR            SSDR_P1   /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
+
+/* PXA27x ports */
+#if defined (CONFIG_PXA27x)
+#define SSTO_P1         __REG(0x41000028)  /* SSP Port 1 Time Out Register */
+#define SSPSP_P1        __REG(0x4100002C)  /* SSP Port 1 Programmable Serial Protocol */
+#define SSTSA_P1        __REG(0x41000030)  /* SSP Port 1 Tx Timeslot Active */
+#define SSRSA_P1        __REG(0x41000034)  /* SSP Port 1 Rx Timeslot Active */
+#define SSTSS_P1        __REG(0x41000038)  /* SSP Port 1 Timeslot Status */
+#define SSACD_P1        __REG(0x4100003C)  /* SSP Port 1 Audio Clock Divider */
+#define SSCR0_P2        __REG(0x41700000)  /* SSP Port 2 Control Register 0 */
+#define SSCR1_P2        __REG(0x41700004)  /* SSP Port 2 Control Register 1 */
+#define SSSR_P2         __REG(0x41700008)  /* SSP Port 2 Status Register */
+#define SSITR_P2        __REG(0x4170000C)  /* SSP Port 2 Interrupt Test Register */
+#define SSDR_P2         __REG(0x41700010)  /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
+#define SSTO_P2         __REG(0x41700028)  /* SSP Port 2 Time Out Register */
+#define SSPSP_P2        __REG(0x4170002C)  /* SSP Port 2 Programmable Serial Protocol */
+#define SSTSA_P2        __REG(0x41700030)  /* SSP Port 2 Tx Timeslot Active */
+#define SSRSA_P2        __REG(0x41700034)  /* SSP Port 2 Rx Timeslot Active */
+#define SSTSS_P2        __REG(0x41700038)  /* SSP Port 2 Timeslot Status */
+#define SSACD_P2        __REG(0x4170003C)  /* SSP Port 2 Audio Clock Divider */
+#define SSCR0_P3        __REG(0x41900000)  /* SSP Port 3 Control Register 0 */
+#define SSCR1_P3        __REG(0x41900004)  /* SSP Port 3 Control Register 1 */
+#define SSSR_P3         __REG(0x41900008)  /* SSP Port 3 Status Register */
+#define SSITR_P3        __REG(0x4190000C)  /* SSP Port 3 Interrupt Test Register */
+#define SSDR_P3         __REG(0x41900010)  /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
+#define SSTO_P3         __REG(0x41900028)  /* SSP Port 3 Time Out Register */
+#define SSPSP_P3        __REG(0x4190002C)  /* SSP Port 3 Programmable Serial Protocol */
+#define SSTSA_P3        __REG(0x41900030)  /* SSP Port 3 Tx Timeslot Active */
+#define SSRSA_P3        __REG(0x41900034)  /* SSP Port 3 Rx Timeslot Active */
+#define SSTSS_P3        __REG(0x41900038)  /* SSP Port 3 Timeslot Status */
+#define SSACD_P3        __REG(0x4190003C)  /* SSP Port 3 Audio Clock Divider */
+#else /* PXA255 (only port 2) and PXA26x ports*/
+#define SSTO_P1         __REG(0x41000028)  /* SSP Port 1 Time Out Register */
+#define SSPSP_P1        __REG(0x4100002C)  /* SSP Port 1 Programmable Serial Protocol */
+#define SSCR0_P2        __REG(0x41400000)  /* SSP Port 2 Control Register 0 */
+#define SSCR1_P2        __REG(0x41400004)  /* SSP Port 2 Control Register 1 */
+#define SSSR_P2         __REG(0x41400008)  /* SSP Port 2 Status Register */
+#define SSITR_P2        __REG(0x4140000C)  /* SSP Port 2 Interrupt Test Register */
+#define SSDR_P2         __REG(0x41400010)  /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
+#define SSTO_P2         __REG(0x41400028)  /* SSP Port 2 Time Out Register */
+#define SSPSP_P2        __REG(0x4140002C)  /* SSP Port 2 Programmable Serial Protocol */
+#define SSCR0_P3        __REG(0x41500000)  /* SSP Port 3 Control Register 0 */
+#define SSCR1_P3        __REG(0x41500004)  /* SSP Port 3 Control Register 1 */
+#define SSSR_P3         __REG(0x41500008)  /* SSP Port 3 Status Register */
+#define SSITR_P3        __REG(0x4150000C)  /* SSP Port 3 Interrupt Test Register */
+#define SSDR_P3         __REG(0x41500010)  /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
+#define SSTO_P3         __REG(0x41500028)  /* SSP Port 3 Time Out Register */
+#define SSPSP_P3        __REG(0x4150002C)  /* SSP Port 3 Programmable Serial Protocol */
+#endif
+
+#define SSCR0_P(x) (*(((x) == 1) ? &SSCR0_P1 : ((x) == 2) ? &SSCR0_P2 : ((x) == 3) ? &SSCR0_P3 : NULL))
+#define SSCR1_P(x) (*(((x) == 1) ? &SSCR1_P1 : ((x) == 2) ? &SSCR1_P2 : ((x) == 3) ? &SSCR1_P3 : NULL))
+#define SSSR_P(x) (*(((x) == 1) ? &SSSR_P1 : ((x) == 2) ? &SSSR_P2 : ((x) == 3) ? &SSSR_P3 : NULL))
+#define SSITR_P(x) (*(((x) == 1) ? &SSITR_P1 : ((x) == 2) ? &SSITR_P2 : ((x) == 3) ? &SSITR_P3 : NULL))
+#define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL))
+#define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
+#define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
+#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL))
+#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL))
+#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL))
+#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL))
+
+#endif /* __ASM_ARCH_REGS_SSP_H */