[PATCH] ARM: 2686/2: AAEC-2000 Core support

Patch from Bellido Nicolas

Core support for AAEC-2000 based platforms.
This is an updated version of the previous patch, and takes
into account Russell's comments.
AAED-2000 default configuration will follow as soon
as some problems with the bootloader are sorted out...

Signed-off-by: Nicolas Bellido
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 files changed, 544 insertions, 0 deletions

diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h
new file mode 100644
index 000000000000..0e9b7e18af05
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/aaec2000.h
@@ -0,0 +1,151 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/aaec2000.h
+ *
+ *  AAEC-2000 registers definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAEC2000_H
+#define __ASM_ARCH_AAEC2000_H
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not this file
+#endif /* __ASM_ARCH_HARDWARE_H */
+
+/* Interrupt controller */
+#define IRQ_BASE        __REG(0x80000500)
+#define IRQ_INTSR       __REG(0x80000500)       /* Int Status Register */
+#define IRQ_INTRSR      __REG(0x80000504)       /* Int Raw (unmasked) Status */
+#define IRQ_INTENS      __REG(0x80000508)       /* Int Enable Set */
+#define IRQ_INTENC      __REG(0x8000050c)       /* Int Enable Clear */
+
+/* UART 1 */
+#define UART1_BASE      __REG(0x80000600)
+#define UART1_DR        __REG(0x80000600) /* Data/FIFO Register */
+#define UART1_LCR       __REG(0x80000604) /* Link Control Register */
+#define UART1_BRCR      __REG(0x80000608) /* Baud Rate Control Register */
+#define UART1_CR        __REG(0x8000060c) /* Control Register */
+#define UART1_SR        __REG(0x80000610) /* Status Register */
+#define UART1_INT       __REG(0x80000614) /* Interrupt Status Register */
+#define UART1_INTM      __REG(0x80000618) /* Interrupt Mask Register */
+#define UART1_INTRES    __REG(0x8000061c) /* Int Result (masked status) Register */
+
+/* UART 2 */
+#define UART2_BASE      __REG(0x80000700)
+#define UART2_DR        __REG(0x80000700) /* Data/FIFO Register */
+#define UART2_LCR       __REG(0x80000704) /* Link Control Register */
+#define UART2_BRCR      __REG(0x80000708) /* Baud Rate Control Register */
+#define UART2_CR        __REG(0x8000070c) /* Control Register */
+#define UART2_SR        __REG(0x80000710) /* Status Register */
+#define UART2_INT       __REG(0x80000714) /* Interrupt Status Register */
+#define UART2_INTM      __REG(0x80000718) /* Interrupt Mask Register */
+#define UART2_INTRES    __REG(0x8000071c) /* Int Result (masked status) Register */
+
+/* UART 3 */
+#define UART3_BASE      __REG(0x80000800)
+#define UART3_DR        __REG(0x80000800) /* Data/FIFO Register */
+#define UART3_LCR       __REG(0x80000804) /* Link Control Register */
+#define UART3_BRCR      __REG(0x80000808) /* Baud Rate Control Register */
+#define UART3_CR        __REG(0x8000080c) /* Control Register */
+#define UART3_SR        __REG(0x80000810) /* Status Register */
+#define UART3_INT       __REG(0x80000814) /* Interrupt Status Register */
+#define UART3_INTM      __REG(0x80000818) /* Interrupt Mask Register */
+#define UART3_INTRES    __REG(0x8000081c) /* Int Result (masked status) Register */
+
+/* These are used in some places */
+#define _UART1_BASE __PREG(UART1_BASE)
+#define _UART2_BASE __PREG(UART2_BASE)
+#define _UART3_BASE __PREG(UART3_BASE)
+
+/* UART Registers Offsets */
+#define UART_DR         0x00
+#define UART_LCR        0x04
+#define UART_BRCR       0x08
+#define UART_CR         0x0c
+#define UART_SR         0x10
+#define UART_INT        0x14
+#define UART_INTM       0x18
+#define UART_INTRES     0x1c
+
+/* UART_LCR Bitmask */
+#define UART_LCR_BRK    (1 << 0) /* Send Break */
+#define UART_LCR_PEN    (1 << 1) /* Parity Enable */
+#define UART_LCR_EP     (1 << 2) /* Even/Odd Parity */
+#define UART_LCR_S2     (1 << 3) /* One/Two Stop bits */
+#define UART_LCR_FIFO   (1 << 4) /* FIFO Enable */
+#define UART_LCR_WL5    (0 << 5) /* Word Length - 5 bits */
+#define UART_LCR_WL6    (1 << 5) /* Word Length - 6 bits */
+#define UART_LCR_WL7    (1 << 6) /* Word Length - 7 bits */
+#define UART_LCR_WL8    (1 << 7) /* Word Length - 8 bits */
+
+/* UART_CR Bitmask */
+#define UART_CR_EN      (1 << 0) /* UART Enable */
+#define UART_CR_SIR     (1 << 1) /* IrDA SIR Enable */
+#define UART_CR_SIRLP   (1 << 2) /* Low Power IrDA Enable */
+#define UART_CR_RXP     (1 << 3) /* Receive Pin Polarity */
+#define UART_CR_TXP     (1 << 4) /* Transmit Pin Polarity */
+#define UART_CR_MXP     (1 << 5) /* Modem Pin Polarity */
+#define UART_CR_LOOP    (1 << 6) /* Loopback Mode */
+
+/* UART_SR Bitmask */
+#define UART_SR_CTS     (1 << 0) /* Clear To Send Status */
+#define UART_SR_DSR     (1 << 1) /* Data Set Ready Status */
+#define UART_SR_DCD     (1 << 2) /* Data Carrier Detect Status */
+#define UART_SR_TxBSY   (1 << 3) /* Transmitter Busy Status */
+#define UART_SR_RxFE    (1 << 4) /* Receive FIFO Empty Status */
+#define UART_SR_TxFF    (1 << 5) /* Transmit FIFO Full Status */
+#define UART_SR_RxFF    (1 << 6) /* Receive FIFO Full Status */
+#define UART_SR_TxFE    (1 << 7) /* Transmit FIFO Empty Status */
+
+/* UART_INT Bitmask */
+#define UART_INT_RIS    (1 << 0) /* Rx Interrupt */
+#define UART_INT_TIS    (1 << 1) /* Tx Interrupt */
+#define UART_INT_MIS    (1 << 2) /* Modem Interrupt */
+#define UART_INT_RTIS   (1 << 3) /* Receive Timeout Interrupt */
+
+/* Timer 1 */
+#define TIMER1_BASE     __REG(0x80000c00)
+#define TIMER1_LOAD     __REG(0x80000c00)       /* Timer 1 Load Register */
+#define TIMER1_VAL      __REG(0x80000c04)       /* Timer 1 Value Register */
+#define TIMER1_CTRL     __REG(0x80000c08)       /* Timer 1 Control Register */
+#define TIMER1_CLEAR    __REG(0x80000c0c)       /* Timer 1 Clear Register */
+
+/* Timer 2 */
+#define TIMER2_BASE     __REG(0x80000d00)
+#define TIMER2_LOAD     __REG(0x80000d00)       /* Timer 2 Load Register */
+#define TIMER2_VAL      __REG(0x80000d04)       /* Timer 2 Value Register */
+#define TIMER2_CTRL     __REG(0x80000d08)       /* Timer 2 Control Register */
+#define TIMER2_CLEAR    __REG(0x80000d0c)       /* Timer 2 Clear Register */
+
+/* Timer 3 */
+#define TIMER3_BASE     __REG(0x80000e00)
+#define TIMER3_LOAD     __REG(0x80000e00)       /* Timer 3 Load Register */
+#define TIMER3_VAL      __REG(0x80000e04)       /* Timer 3 Value Register */
+#define TIMER3_CTRL     __REG(0x80000e08)       /* Timer 3 Control Register */
+#define TIMER3_CLEAR    __REG(0x80000e0c)       /* Timer 3 Clear Register */
+
+/* Timer Control register bits */
+#define TIMER_CTRL_ENABLE       (1 << 7) /* Enable (Start° Timer */
+#define TIMER_CTRL_PERIODIC     (1 << 6) /* Periodic Running Mode */
+#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
+#define TIMER_CTRL_CLKSEL_508K  (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
+#define TIMER_CTRL_CLKSEL_2K    (0 << 3) /* 2KHz Clock Select (Timer 1, 2)*/
+
+/* Power and State Control */
+#define POWER_BASE      __REG(0x80000400)
+#define POWER_PWRSR     __REG(0x80000400) /* Power Status Register */
+#define POWER_PWRCNT    __REG(0x80000404) /* Power/Clock control */
+#define POWER_HALT      __REG(0x80000408) /* Power Idle Mode */
+#define POWER_STDBY     __REG(0x8000040c) /* Power Standby Mode */
+#define POWER_BLEOI     __REG(0x80000410) /* Battery Low End of Interrupt */
+#define POWER_MCEOI     __REG(0x80000414) /* Media Changed EoI */
+#define POWER_TEOI      __REG(0x80000418) /* Tick EoI */
+#define POWER_STFCLR    __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
+#define POWER_CLKSET    __REG(0x80000420) /* Clock Speed Control */
+
+#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S
new file mode 100644
index 000000000000..e4f1fa539a74
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/debug-macro.S
@@ -0,0 +1,36 @@
+/*  linux/include/asm-arm/arch-aaec2000/debug-macro.S
+ *
+ *  Debugging macro include header
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+                moveq   \rx, #0x80000000                @ physical
+                movne   \rx, #io_p2v(0x80000000)        @ virtual
+                orr     \rx, \rx, #0x00000800
+                .endm
+
+                .macro  senduart,rd,rx
+                str     \rd, [\rx, #0]
+                .endm
+
+                .macro  busyuart,rd,rx
+1002:           ldr     \rd, [\rx, #0x10]
+                tst     \rd, #(1 << 7)
+                beq     1002b
+                .endm
+
+                .macro  waituart,rd,rx
+#if 0
+1001:           ldr     \rd, [\rx, #0x10]
+                tst     \rd, #(1 << 5)
+                beq     1001b
+#endif
+                .endm
diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h
new file mode 100644
index 000000000000..28c890b4a1d3
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/dma.h
@@ -0,0 +1,17 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/dma.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS         0xffffffff
+#define MAX_DMA_CHANNELS        0
+
+#endif
diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S
new file mode 100644
index 000000000000..df31313ab07e
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/entry-macro.S
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/entry-macro.S
+ *
+ *  Low-level IRQ helper for aaec-2000 based platforms
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+                .macro  disable_fiq
+                .endm
+
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                mov     r4, #0xf8000000
+                add     r4, r4, #0x00000500
+                mov     \base, r4
+                ldr     \irqstat, [\base, #0]
+                cmp     \irqstat, #0
+                bne     1001f
+                ldr     \irqnr, =NR_IRQS+1
+                b       1003f
+1001:           mov     \irqnr, #0
+1002:           ands    \tmp, \irqstat, #1
+                mov     \irqstat, \irqstat, LSR #1
+                add     \irqnr, \irqnr, #1
+                beq     1002b
+                sub     \irqnr, \irqnr, #1
+1003:
+                .endm
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h
new file mode 100644
index 000000000000..4c37219e030e
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/hardware.h
@@ -0,0 +1,49 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/hardware.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <linux/config.h>
+
+/* The kernel is loaded at physical address 0xf8000000.
+ * We map the IO space a bit after
+ */
+#define PIO_APB_BASE    0x80000000
+#define VIO_APB_BASE    0xf8000000
+#define IO_APB_LENGTH   0x2000
+#define PIO_AHB_BASE    0x80002000
+#define VIO_AHB_BASE    0xf8002000
+#define IO_AHB_LENGTH   0x2000
+
+#define VIO_BASE    VIO_APB_BASE
+#define PIO_BASE    PIO_APB_BASE
+
+#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
+#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/* FIXME: Is it needed to optimize this a la pxa ?? */
+#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
+#define __PREG(x)   (io_v2p((u32)&(x)))
+
+#else /* __ASSEMBLY__ */
+
+#define __REG(x)    io_p2v(x)
+#define __PREG(x)   io_v2p(x)
+
+#endif
+
+#include "aaec2000.h"
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h
new file mode 100644
index 000000000000..c58a8d10425a
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/io.h
@@ -0,0 +1,19 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/io.h
+ *
+ *  Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)                 ((void __iomem *)(a))
+#define __mem_pci(a)            (a)
+#define __mem_isa(a)            (a)
+
+#endif
diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h
new file mode 100644
index 000000000000..de252220e806
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/irqs.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define INT_GPIOF0_FIQ  0  /* External GPIO Port F O Fast Interrupt Input */
+#define INT_BL_FIQ      1  /* Battery Low Fast Interrupt */
+#define INT_WE_FIQ      2  /* Watchdog Expired Fast Interrupt */
+#define INT_MV_FIQ      3  /* Media Changed Interrupt */
+#define INT_SC          4  /* Sound Codec Interrupt */
+#define INT_GPIO1       5  /* GPIO Port F Configurable Int 1 */
+#define INT_GPIO2       6  /* GPIO Port F Configurable Int 2 */
+#define INT_GPIO3       7  /* GPIO Port F Configurable Int 3 */
+#define INT_TMR1_OFL    8  /* Timer 1 Overflow Interrupt */
+#define INT_TMR2_OFL    9  /* Timer 2 Overflow Interrupt */
+#define INT_RTC_CM      10 /* RTC Compare Match Interrupt */
+#define INT_TICK        11 /* 64Hz Tick Interrupt */
+#define INT_UART1       12 /* UART1 Interrupt */
+#define INT_UART2       13 /* UART2 & Modem State Changed Interrupt */
+#define INT_LCD         14 /* LCD Interrupt */
+#define INT_SSI         15 /* SSI End of Transfer Interrupt */
+#define INT_UART3       16 /* UART3 Interrupt */
+#define INT_SCI         17 /* SCI Interrupt */
+#define INT_AAC         18 /* Advanced Audio Codec Interrupt */
+#define INT_MMC         19 /* MMC Interrupt */
+#define INT_USB         20 /* USB Interrupt */
+#define INT_DMA         21 /* DMA Interrupt */
+#define INT_TMR3_UOFL   22 /* Timer 3 Underflow Interrupt */
+#define INT_GPIO4       23 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO5       24 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO6       25 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO7       26 /* GPIO Port F Configurable Int 4 */
+#define INT_BMI         27 /* BMI Interrupt */
+
+#define NR_IRQS         (INT_BMI + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h
new file mode 100644
index 000000000000..681b6a6171a1
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/memory.h
@@ -0,0 +1,73 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/memory.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <linux/config.h>
+
+#define PHYS_OFFSET     (0xf0000000UL)
+
+#define __virt_to_bus(x)        __virt_to_phys(x)
+#define __bus_to_virt(x)        __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * The nodes are the followings:
+ *
+ *   node 0: 0xf000.0000 - 0xf3ff.ffff
+ *   node 1: 0xf400.0000 - 0xf7ff.ffff
+ *   node 2: 0xf800.0000 - 0xfbff.ffff
+ *   node 3: 0xfc00.0000 - 0xffff.ffff
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) \
+        (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT)
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+#define PFN_TO_NID(pfn) \
+        (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT))
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and return the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr)  NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
+
+/*
+ * Given a page frame number, find the owning node of the memory
+ * and return the mem_map of that node.
+ */
+#define PFN_TO_MAPBASE(pfn)     NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+/*
+ *  Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ *  and returns the index corresponding to the appropriate page in the
+ *  node's mem_map.
+ */
+#define LOCAL_MAP_NR(addr) \
+        (((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT)
+
+#define NODE_MAX_MEM_SHIFT      26
+#define NODE_MAX_MEM_SIZE       (1 << NODE_MAX_MEM_SHIFT)
+
+#else
+
+#define PFN_TO_NID(addr)        (0)
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-aaec2000/param.h b/include/asm-arm/arch-aaec2000/param.h
new file mode 100644
index 000000000000..139936c2faf2
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/param.h
@@ -0,0 +1,15 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/param.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PARAM_H
+#define __ASM_ARCH_PARAM_H
+
+#endif /* __ASM_ARCH_PARAM_H */
+
diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h
new file mode 100644
index 000000000000..08de97b407a8
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/system.h
@@ -0,0 +1,24 @@
+/*
+ *  linux/include/asm-arm/arch-aaed2000/system.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+        cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+        cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h
new file mode 100644
index 000000000000..f5708b38fb7f
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/timex.h
+ *
+ *  AAEC-2000 Architecture timex specification
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE         508000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h
new file mode 100644
index 000000000000..fff0c94b75c4
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/uncompress.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include "hardware.h"
+
+#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putstr( const char *s )
+{
+        unsigned long serial_port;
+        do {
+                serial_port = _UART3_BASE;
+                if (UART(UART_CR) & UART_CR_EN) break;
+                serial_port = _UART1_BASE;
+                if (UART(UART_CR) & UART_CR_EN) break;
+                serial_port = _UART2_BASE;
+                if (UART(UART_CR) & UART_CR_EN) break;
+                return;
+        } while (0);
+
+        for (; *s; s++) {
+                /* wait for space in the UART's transmitter */
+                while ((UART(UART_SR) & UART_SR_TxFF));
+                /* send the character out. */
+                UART(UART_DR) = *s;
+                /* if a LF, also do CR... */
+                if (*s == 10) {
+                        while ((UART(UART_SR) & UART_SR_TxFF));
+                        UART(UART_DR) = 13;
+                }
+        }
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h
new file mode 100644
index 000000000000..ecb991e2e4ff
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/vmalloc.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END             (PAGE_OFFSET + 0x10000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */