[ARM] 3587/1: AT91RM9200 hardware headers

Patch from Andrew Victor

These headers define the registers and bits for the SPI (Serial
Peripheral Interface), SSC (Synchronous Serial), TC (Timer/Counter) and
UDP (USB Device) peripherals integrated in the AT91RM9200 processor.

(They will probably also be usable for the AT91SAM9 series of SoC
processors)

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

4 files changed, 400 insertions, 0 deletions

diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h b/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
new file mode 100644
index 000000000000..bff5ea45f604
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
@@ -0,0 +1,81 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_SPI_H
+#define AT91RM9200_SPI_H
+
+#define AT91_SPI_CR                     0x00            /* Control Register */
+#define         AT91_SPI_SPIEN          (1 <<  0)               /* SPI Enable */
+#define         AT91_SPI_SPIDIS         (1 <<  1)               /* SPI Disable */
+#define         AT91_SPI_SWRST          (1 <<  7)               /* SPI Software Reset */
+#define         AT91_SPI_LASTXFER       (1 << 24)               /* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR                     0x04            /* Mode Register */
+#define         AT91_SPI_MSTR           (1    <<  0)            /* Master/Slave Mode */
+#define         AT91_SPI_PS             (1    <<  1)            /* Peripheral Select */
+#define                 AT91_SPI_PS_FIXED       (0 << 1)
+#define                 AT91_SPI_PS_VARIABLE    (1 << 1)
+#define         AT91_SPI_PCSDEC         (1    <<  2)            /* Chip Select Decode */
+#define         AT91_SPI_DIV32          (1    <<  3)            /* Clock Selection */
+#define         AT91_SPI_MODFDIS        (1    <<  4)            /* Mode Fault Detection */
+#define         AT91_SPI_LLB            (1    <<  7)            /* Local Loopback Enable */
+#define         AT91_SPI_PCS            (0xf  << 16)            /* Peripheral Chip Select */
+#define         AT91_SPI_DLYBCS         (0xff << 24)            /* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR            0x08                    /* Receive Data Register */
+#define         AT91_SPI_RD             (0xffff <<  0)          /* Receive Data */
+#define         AT91_SPI_PCS            (0xf    << 16)          /* Peripheral Chip Select */
+
+#define AT91_SPI_TDR            0x0c                    /* Transmit Data Register */
+#define         AT91_SPI_TD             (0xffff <<  0)          /* Transmit Data */
+#define         AT91_SPI_PCS            (0xf    << 16)          /* Peripheral Chip Select */
+#define         AT91_SPI_LASTXFER       (1      << 24)          /* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR             0x10                    /* Status Register */
+#define         AT91_SPI_RDRF           (1 <<  0)               /* Receive Data Register Full */
+#define         AT91_SPI_TDRE           (1 <<  1)               /* Transmit Data Register Full */
+#define         AT91_SPI_MODF           (1 <<  2)               /* Mode Fault Error */
+#define         AT91_SPI_OVRES          (1 <<  3)               /* Overrun Error Status */
+#define         AT91_SPI_ENDRX          (1 <<  4)               /* End of RX buffer */
+#define         AT91_SPI_ENDTX          (1 <<  5)               /* End of TX buffer */
+#define         AT91_SPI_RXBUFF         (1 <<  6)               /* RX Buffer Full */
+#define         AT91_SPI_TXBUFE         (1 <<  7)               /* TX Buffer Empty */
+#define         AT91_SPI_NSSR           (1 <<  8)               /* NSS Rising [SAM9261 only] */
+#define         AT91_SPI_TXEMPTY        (1 <<  9)               /* Transmission Register Empty [SAM9261 only] */
+#define         AT91_SPI_SPIENS         (1 << 16)               /* SPI Enable Status */
+
+#define AT91_SPI_IER            0x14                    /* Interrupt Enable Register */
+#define AT91_SPI_IDR            0x18                    /* Interrupt Disable Register */
+#define AT91_SPI_IMR            0x1c                    /* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)         (0x30 + ((n) * 4))      /* Chip Select Registers 0-3 */
+#define         AT91_SPI_CPOL           (1    <<  0)            /* Clock Polarity */
+#define         AT91_SPI_NCPHA          (1    <<  1)            /* Clock Phase */
+#define         AT91_SPI_CSAAT          (1    <<  3)            /* Chip Select Active After Transfer [SAM9261 only] */
+#define         AT91_SPI_BITS           (0xf  <<  4)            /* Bits Per Transfer */
+#define                 AT91_SPI_BITS_8         (0 << 4)
+#define                 AT91_SPI_BITS_9         (1 << 4)
+#define                 AT91_SPI_BITS_10        (2 << 4)
+#define                 AT91_SPI_BITS_11        (3 << 4)
+#define                 AT91_SPI_BITS_12        (4 << 4)
+#define                 AT91_SPI_BITS_13        (5 << 4)
+#define                 AT91_SPI_BITS_14        (6 << 4)
+#define                 AT91_SPI_BITS_15        (7 << 4)
+#define                 AT91_SPI_BITS_16        (8 << 4)
+#define         AT91_SPI_SCBR           (0xff <<  8)            /* Serial Clock Baud Rate */
+#define         AT91_SPI_DLYBS          (0xff << 16)            /* Delay before SPCK */
+#define         AT91_SPI_DLYBCT         (0xff << 24)            /* Delay between Consecutive Transfers */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
new file mode 100644
index 000000000000..ac880227147f
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
@@ -0,0 +1,96 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Serial Synchronous Controller (SSC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_SSC_H
+#define AT91RM9200_SSC_H
+
+#define AT91_SSC_CR             0x00    /* Control Register */
+#define         AT91_SSC_RXEN           (1 <<  0)       /* Receive Enable */
+#define         AT91_SSC_RXDIS          (1 <<  1)       /* Receive Disable */
+#define         AT91_SSC_TXEN           (1 <<  8)       /* Transmit Enable */
+#define         AT91_SSC_TXDIS          (1 <<  9)       /* Transmit Disable */
+#define         AT91_SSC_SWRST          (1 << 15)       /* Software Reset */
+
+#define AT91_SSC_CMR            0x04    /* Clock Mode Register */
+#define         AT91_SSC_CMR_DIV        (0xfff << 0)    /* Clock Divider */
+
+#define AT91_SSC_RCMR           0x10    /* Receive Clock Mode Register */
+#define         AT91_SSC_CKS            (3    <<  0)    /* Clock Selection */
+#define                 AT91_SSC_CKS_DIV                (0 << 0)
+#define                 AT91_SSC_CKS_CLOCK              (1 << 0)
+#define                 AT91_SSC_CKS_PIN                (2 << 0)
+#define         AT91_SSC_CKO            (7    <<  2)    /* Clock Output Mode Selection */
+#define                 AT91_SSC_CKO_NONE               (0 << 2)
+#define                 AT91_SSC_CKO_CONTINUOUS         (1 << 2)
+#define         AT91_SSC_CKI            (1    <<  5)    /* Clock Inversion */
+#define                 AT91_SSC_CKI_FALLING            (0 << 5)
+#define                 AT91_SSC_CK_RISING              (1 << 5)
+#define         AT91_SSC_START          (0xf  <<  8)    /* Start Selection */
+#define                 AT91_SSC_START_CONTINUOUS       (0 << 8)
+#define                 AT91_SSC_START_TX_RX            (1 << 8)
+#define                 AT91_SSC_START_LOW_RF           (2 << 8)
+#define                 AT91_SSC_START_HIGH_RF          (3 << 8)
+#define                 AT91_SSC_START_FALLING_RF       (4 << 8)
+#define                 AT91_SSC_START_RISING_RF        (5 << 8)
+#define                 AT91_SSC_START_LEVEL_RF         (6 << 8)
+#define                 AT91_SSC_START_EDGE_RF          (7 << 8)
+#define         AT91_SSC_STTDLY         (0xff << 16)    /* Start Delay */
+#define         AT91_SSC_PERIOD         (0xff << 24)    /* Period Divider Selection */
+
+#define AT91_SSC_RFMR           0x14    /* Receive Frame Mode Register */
+#define         AT91_SSC_DATALEN        (0x1f <<  0)    /* Data Length */
+#define         AT91_SSC_LOOP           (1    <<  5)    /* Loop Mode */
+#define         AT91_SSC_MSBF           (1    <<  7)    /* Most Significant Bit First */
+#define         AT91_SSC_DATNB          (0xf  <<  8)    /* Data Number per Frame */
+#define         AT91_SSC_FSLEN          (0xf  << 16)    /* Frame Sync Length */
+#define         AT91_SSC_FSOS           (7    << 20)    /* Frame Sync Output Selection */
+#define                 AT91_SSC_FSOS_NONE              (0 << 20)
+#define                 AT91_SSC_FSOS_NEGATIVE          (1 << 20)
+#define                 AT91_SSC_FSOS_POSITIVE          (2 << 20)
+#define                 AT91_SSC_FSOS_LOW               (3 << 20)
+#define                 AT91_SSC_FSOS_HIGH              (4 << 20)
+#define                 AT91_SSC_FSOS_TOGGLE            (5 << 20)
+#define         AT91_SSC_FSEDGE         (1    << 24)    /* Frame Sync Edge Detection */
+#define                 AT91_SSC_FSEDGE_POSITIVE        (0 << 24)
+#define                 AT91_SSC_FSEDGE_NEGATIVE        (1 << 24)
+
+#define AT91_SSC_TCMR           0x18    /* Transmit Clock Mode Register */
+#define AT91_SSC_TFMR           0x1c    /* Transmit Fram Mode Register */
+#define         AT91_SSC_DATDEF         (1 <<  5)       /* Data Default Value */
+#define         AT91_SSC_FSDEN          (1 << 23)       /* Frame Sync Data Enable */
+
+#define AT91_SSC_RHR            0x20    /* Receive Holding Register */
+#define AT91_SSC_THR            0x24    /* Transmit Holding Register */
+#define AT91_SSC_RSHR           0x30    /* Receive Sync Holding Register */
+#define AT91_SSC_TSHR           0x34    /* Transmit Sync Holding Register */
+
+#define AT91_SSC_SR             0x40    /* Status Register */
+#define         AT91_SSC_TXRDY          (1 <<  0)       /* Transmit Ready */
+#define         AT91_SSC_TXEMPTY        (1 <<  1)       /* Transmit Empty */
+#define         AT91_SSC_ENDTX          (1 <<  2)       /* End of Transmission */
+#define         AT91_SSC_TXBUFE         (1 <<  3)       /* Transmit Buffer Empty */
+#define         AT91_SSC_RXRDY          (1 <<  4)       /* Receive Ready */
+#define         AT91_SSC_OVRUN          (1 <<  5)       /* Receive Overrun */
+#define         AT91_SSC_ENDRX          (1 <<  6)       /* End of Reception */
+#define         AT91_SSC_RXBUFF         (1 <<  7)       /* Receive Buffer Full */
+#define         AT91_SSC_TXSYN          (1 << 10)       /* Transmit Sync */
+#define         AT91_SSC_RXSYN          (1 << 11)       /* Receive Sync */
+#define         AT91_SSC_TXENA          (1 << 16)       /* Transmit Enable */
+#define         AT91_SSC_RXENA          (1 << 17)       /* Receive Enable */
+
+#define AT91_SSC_IER            0x44    /* Interrupt Enable Register */
+#define AT91_SSC_IDR            0x48    /* Interrupt Disable Register */
+#define AT91_SSC_IMR            0x4c    /* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
new file mode 100644
index 000000000000..f4da752bb0c8
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
@@ -0,0 +1,146 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Timer/Counter Unit (TC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_TC_H
+#define AT91RM9200_TC_H
+
+#define AT91_TC_BCR             0xc0            /* TC Block Control Register */
+#define         AT91_TC_SYNC            (1 << 0)        /* Synchro Command */
+
+#define AT91_TC_BMR             0xc4            /* TC Block Mode Register */
+#define         AT91_TC_TC0XC0S         (3 << 0)        /* External Clock Signal 0 Selection */
+#define                 AT91_TC_TC0XC0S_TCLK0           (0 << 0)
+#define                 AT91_TC_TC0XC0S_NONE            (1 << 0)
+#define                 AT91_TC_TC0XC0S_TIOA1           (2 << 0)
+#define                 AT91_TC_TC0XC0S_TIOA2           (3 << 0)
+#define         AT91_TC_TC1XC1S         (3 << 2)        /* External Clock Signal 1 Selection */
+#define                 AT91_TC_TC1XC1S_TCLK1           (0 << 2)
+#define                 AT91_TC_TC1XC1S_NONE            (1 << 2)
+#define                 AT91_TC_TC1XC1S_TIOA0           (2 << 2)
+#define                 AT91_TC_TC1XC1S_TIOA2           (3 << 2)
+#define         AT91_TC_TC2XC2S         (3 << 4)        /* External Clock Signal 2 Selection */
+#define                 AT91_TC_TC2XC2S_TCLK2           (0 << 4)
+#define                 AT91_TC_TC2XC2S_NONE            (1 << 4)
+#define                 AT91_TC_TC2XC2S_TIOA0           (2 << 4)
+#define                 AT91_TC_TC2XC2S_TIOA1           (3 << 4)
+
+
+#define AT91_TC_CCR             0x00            /* Channel Control Register */
+#define         AT91_TC_CLKEN           (1 << 0)        /* Counter Clock Enable Command */
+#define         AT91_TC_CLKDIS          (1 << 1)        /* Counter CLock Disable Command */
+#define         AT91_TC_SWTRG           (1 << 2)        /* Software Trigger Command */
+
+#define AT91_TC_CMR             0x04            /* Channel Mode Register */
+#define         AT91_TC_TCCLKS          (7 << 0)        /* Capture/Waveform Mode: Clock Selection */
+#define                 AT91_TC_TIMER_CLOCK1            (0 << 0)
+#define                 AT91_TC_TIMER_CLOCK2            (1 << 0)
+#define                 AT91_TC_TIMER_CLOCK3            (2 << 0)
+#define                 AT91_TC_TIMER_CLOCK4            (3 << 0)
+#define                 AT91_TC_TIMER_CLOCK5            (4 << 0)
+#define                 AT91_TC_XC0                     (5 << 0)
+#define                 AT91_TC_XC1                     (6 << 0)
+#define                 AT91_TC_XC2                     (7 << 0)
+#define         AT91_TC_CLKI            (1 << 3)        /* Capture/Waveform Mode: Clock Invert */
+#define         AT91_TC_BURST           (3 << 4)        /* Capture/Waveform Mode: Burst Signal Selection */
+#define         AT91_TC_LDBSTOP         (1 << 6)        /* Capture Mode: Counter Clock Stopped with TB Loading */
+#define         AT91_TC_LDBDIS          (1 << 7)        /* Capture Mode: Counter Clock Disable with RB Loading */
+#define         AT91_TC_ETRGEDG         (3 << 8)        /* Capture Mode: External Trigger Edge Selection */
+#define         AT91_TC_ABETRG          (1 << 10)       /* Capture Mode: TIOA or TIOB External Trigger Selection */
+#define         AT91_TC_CPCTRG          (1 << 14)       /* Capture Mode: RC Compare Trigger Enable */
+#define         AT91_TC_WAVE            (1 << 15)       /* Capture/Waveform mode */
+#define         AT91_TC_LDRA            (3 << 16)       /* Capture Mode: RA Loading Selection */
+#define         AT91_TC_LDRB            (3 << 18)       /* Capture Mode: RB Loading Selection */
+
+#define         AT91_TC_CPCSTOP         (1 <<  6)       /* Waveform Mode: Counter Clock Stopped with RC Compare */
+#define         AT91_TC_CPCDIS          (1 <<  7)       /* Waveform Mode: Counter Clock Disable with RC Compare */
+#define         AT91_TC_EEVTEDG         (3 <<  8)       /* Waveform Mode: External Event Edge Selection */
+#define                 AT91_TC_EEVTEDG_NONE            (0 << 8)
+#define                 AT91_TC_EEVTEDG_RISING          (1 << 8)
+#define                 AT91_TC_EEVTEDG_FALLING         (2 << 8)
+#define                 AT91_TC_EEVTEDG_BOTH            (3 << 8)
+#define         AT91_TC_EEVT            (3 << 10)       /* Waveform Mode: External Event Selection */
+#define                 AT91_TC_EEVT_TIOB               (0 << 10)
+#define                 AT91_TC_EEVT_XC0                (1 << 10)
+#define                 AT91_TC_EEVT_XC1                (2 << 10)
+#define                 AT91_TC_EEVT_XC2                (3 << 10)
+#define         AT91_TC_ENETRG          (1 << 12)       /* Waveform Mode: External Event Trigger Enable */
+#define         AT91_TC_WAVESEL         (3 << 13)       /* Waveform Mode: Waveform Selection */
+#define                 AT91_TC_WAVESEL_UP              (0 << 13)
+#define                 AT91_TC_WAVESEL_UP_AUTO         (2 << 13)
+#define                 AT91_TC_WAVESEL_UPDOWN          (1 << 13)
+#define                 AT91_TC_WAVESEL_UPDOWN_AUTO     (3 << 13)
+#define         AT91_TC_ACPA            (3 << 16)       /* Waveform Mode: RA Compare Effect on TIOA */
+#define                 AT91_TC_ACPA_NONE               (0 << 16)
+#define                 AT91_TC_ACPA_SET                (1 << 16)
+#define                 AT91_TC_ACPA_CLEAR              (2 << 16)
+#define                 AT91_TC_ACPA_TOGGLE             (3 << 16)
+#define         AT91_TC_ACPC            (3 << 18)       /* Waveform Mode: RC Compre Effect on TIOA */
+#define                 AT91_TC_ACPC_NONE               (0 << 18)
+#define                 AT91_TC_ACPC_SET                (1 << 18)
+#define                 AT91_TC_ACPC_CLEAR              (2 << 18)
+#define                 AT91_TC_ACPC_TOGGLE             (3 << 18)
+#define         AT91_TC_AEEVT           (3 << 20)       /* Waveform Mode: External Event Effect on TIOA */
+#define                 AT91_TC_AEEVT_NONE              (0 << 20)
+#define                 AT91_TC_AEEVT_SET               (1 << 20)
+#define                 AT91_TC_AEEVT_CLEAR             (2 << 20)
+#define                 AT91_TC_AEEVT_TOGGLE            (3 << 20)
+#define         AT91_TC_ASWTRG          (3 << 22)       /* Waveform Mode: Software Trigger Effect on TIOA */
+#define                 AT91_TC_ASWTRG_NONE             (0 << 22)
+#define                 AT91_TC_ASWTRG_SET              (1 << 22)
+#define                 AT91_TC_ASWTRG_CLEAR            (2 << 22)
+#define                 AT91_TC_ASWTRG_TOGGLE           (3 << 22)
+#define         AT91_TC_BCPB            (3 << 24)       /* Waveform Mode: RB Compare Effect on TIOB */
+#define                 AT91_TC_BCPB_NONE               (0 << 24)
+#define                 AT91_TC_BCPB_SET                (1 << 24)
+#define                 AT91_TC_BCPB_CLEAR              (2 << 24)
+#define                 AT91_TC_BCPB_TOGGLE             (3 << 24)
+#define         AT91_TC_BCPC            (3 << 26)       /* Waveform Mode: RC Compare Effect on TIOB */
+#define                 AT91_TC_BCPC_NONE               (0 << 26)
+#define                 AT91_TC_BCPC_SET                (1 << 26)
+#define                 AT91_TC_BCPC_CLEAR              (2 << 26)
+#define                 AT91_TC_BCPC_TOGGLE             (3 << 26)
+#define         AT91_TC_BEEVT           (3 << 28)       /* Waveform Mode: External Event Effect on TIOB */
+#define                 AT91_TC_BEEVT_NONE              (0 << 28)
+#define                 AT91_TC_BEEVT_SET               (1 << 28)
+#define                 AT91_TC_BEEVT_CLEAR             (2 << 28)
+#define                 AT91_TC_BEEVT_TOGGLE            (3 << 28)
+#define         AT91_TC_BSWTRG          (3 << 30)       /* Waveform Mode: Software Trigger Effect on TIOB */
+#define                 AT91_TC_BSWTRG_NONE             (0 << 30)
+#define                 AT91_TC_BSWTRG_SET              (1 << 30)
+#define                 AT91_TC_BSWTRG_CLEAR            (2 << 30)
+#define                 AT91_TC_BSWTRG_TOGGLE           (3 << 30)
+
+#define AT91_TC_CV              0x10            /* Counter Value */
+#define AT91_TC_RA              0x14            /* Register A */
+#define AT91_TC_RB              0x18            /* Register B */
+#define AT91_TC_RC              0x1c            /* Register C */
+
+#define AT91_TC_SR              0x20            /* Status Register */
+#define         AT91_TC_COVFS           (1 <<  0)       /* Counter Overflow Status */
+#define         AT91_TC_LOVRS           (1 <<  1)       /* Load Overrun Status */
+#define         AT91_TC_CPAS            (1 <<  2)       /* RA Compare Status */
+#define         AT91_TC_CPBS            (1 <<  3)       /* RB Compare Status */
+#define         AT91_TC_CPCS            (1 <<  4)       /* RC Compare Status */
+#define         AT91_TC_LDRAS           (1 <<  5)       /* RA Loading Status */
+#define         AT91_TC_LDRBS           (1 <<  6)       /* RB Loading Status */
+#define         AT91_TC_ETRGS           (1 <<  7)       /* External Trigger Status */
+#define         AT91_TC_CLKSTA          (1 << 16)       /* Clock Enabling Status */
+#define         AT91_TC_MTIOA           (1 << 17)       /* TIOA Mirror */
+#define         AT91_TC_MTIOB           (1 << 18)       /* TIOB Mirror */
+
+#define AT91_TC_IER             0x24            /* Interrupt Enable Register */
+#define AT91_TC_IDR             0x28            /* Interrupt Disable Register */
+#define AT91_TC_IMR             0x2c            /* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
new file mode 100644
index 000000000000..951e3f61cef4
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
@@ -0,0 +1,77 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * USB Device Port (UDP) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_UDP_H
+#define AT91RM9200_UDP_H
+
+#define AT91_UDP_FRM_NUM        0x00            /* Frame Number Register */
+#define         AT91_UDP_NUM            (0x7ff <<  0)           /* Frame Number */
+#define         AT91_UDP_FRM_ERR        (1     << 16)           /* Frame Error */
+#define         AT91_UDP_FRM_OK         (1     << 17)           /* Frame OK */
+
+#define AT91_UDP_GLB_STAT       0x04            /* Global State Register */
+#define         AT91_UDP_FADDEN         (1 <<  0)               /* Function Address Enable */
+#define         AT91_UDP_CONFG          (1 <<  1)               /* Configured */
+#define         AT91_UDP_ESR            (1 <<  2)               /* Enable Send Resume */
+#define         AT91_UDP_RSMINPR        (1 <<  3)               /* Resume has been sent */
+#define         AT91_UDP_RMWUPE         (1 <<  4)               /* Remote Wake Up Enable */
+
+#define AT91_UDP_FADDR          0x08            /* Function Address Register */
+#define         AT91_UDP_FADD           (0x7f << 0)             /* Function Address Value */
+#define         AT91_UDP_FEN            (1    << 8)             /* Function Enable */
+
+#define AT91_UDP_IER            0x10            /* Interrupt Enable Register */
+#define AT91_UDP_IDR            0x14            /* Interrupt Disable Register */
+#define AT91_UDP_IMR            0x18            /* Interrupt Mask Register */
+
+#define AT91_UDP_ISR            0x1c            /* Interrupt Status Register */
+#define         AT91_UDP_EP(n)          (1 << (n))              /* Endpoint Interrupt Status */
+#define         AT91_UDP_RXSUSP         (1 <<  8)               /* USB Suspend Interrupt Status */
+#define         AT91_UDP_RXRSM          (1 <<  9)               /* USB Resume Interrupt Status */
+#define         AT91_UDP_EXTRSM         (1 << 10)               /* External Resume Interrupt Status */
+#define         AT91_UDP_SOFINT         (1 << 11)               /* Start of Frame Interrupt Status */
+#define         AT91_UDP_ENDBUSRES      (1 << 12)               /* End of Bus Reset Interrpt Status */
+#define         AT91_UDP_WAKEUP         (1 << 13)               /* USB Wakeup Interrupt Status */
+
+#define AT91_UDP_ICR            0x20            /* Interrupt Clear Register */
+#define AT91_UDP_RST_EP         0x28            /* Reset Endpoint Register */
+
+#define AT91_UDP_CSR(n)         (0x30 + ((n) * 4))      /* Endpoint Control/Status Registers 0-7 */
+#define         AT91_UDP_TXCOMP         (1 <<  0)               /* Generates IN packet with data previously written in DPR */
+#define         AT91_UDP_RX_DATA_BK0    (1 <<  1)               /* Receive Data Bank 0 */
+#define         AT91_UDP_RXSETUP        (1 <<  2)               /* Send STALL to the host */
+#define         AT91_UDP_STALLSENT      (1 <<  3)               /* Stall Sent / Isochronous error (Isochronous endpoints) */
+#define         AT91_UDP_TXPKTRDY       (1 <<  4)               /* Transmit Packet Ready */
+#define         AT91_UDP_FORCESTALL     (1 <<  5)               /* Force Stall */
+#define         AT91_UDP_RX_DATA_BK1    (1 <<  6)               /* Receive Data Bank 1 */
+#define         AT91_UDP_DIR            (1 <<  7)               /* Transfer Direction */
+#define         AT91_UDP_EPTYPE         (7 <<  8)               /* Endpoint Type */
+#define                 AT91_UDP_EPTYPE_CTRL            (0 <<  8)
+#define                 AT91_UDP_EPTYPE_ISO_OUT         (1 <<  8)
+#define                 AT91_UDP_EPTYPE_BULK_OUT        (2 <<  8)
+#define                 AT91_UDP_EPTYPE_INT_OUT         (3 <<  8)
+#define                 AT91_UDP_EPTYPE_ISO_IN          (5 <<  8)
+#define                 AT91_UDP_EPTYPE_BULK_IN         (6 <<  8)
+#define                 AT91_UDP_EPTYPE_INT_IN          (7 <<  8)
+#define         AT91_UDP_DTGLE          (1 << 11)               /* Data Toggle */
+#define         AT91_UDP_EPEDS          (1 << 15)               /* Endpoint Enable/Disable */
+#define         AT91_UDP_RXBYTECNT      (0x7ff << 16)           /* Number of bytes in FIFO */
+
+#define AT91_UDP_FDR(n)         (0x50 + ((n) * 4))      /* Endpoint FIFO Data Registers 0-7 */
+
+#define AT91_UDP_TXVC           0x74            /* Transceiver Control Register */
+#define         AT91_UDP_TXVC_TXVDIS    (1 << 8)                /* Transceiver Disable */
+
+#endif