[ARM] 3943/1: share declaration of struct pxa2xx_udc_mach_info between multiple platforms

Move declaration of struct pxa2xx_udc_mach_info from
include/asm-arm/arch-pxa/udc.h to new file
include/asm-arm/mach/udc_pxa2xx.h.

This allow us to use this structure with
multiple platforms - pxa and ixp4xx. USB
device controller used in pxa25x is the same
as controller used in ixp4xx.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 26 insertions, 0 deletions

diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h
new file mode 100644
index 000000000000..ff0a95715a07
--- /dev/null
+++ b/include/asm-arm/mach/udc_pxa2xx.h
@@ -0,0 +1,26 @@
+/*
+ * linux/include/asm-arm/mach/udc_pxa2xx.h
+ *
+ * This supports machine-specific differences in how the PXA2xx
+ * USB Device Controller (UDC) is wired.
+ *
+ * It is set in linux/arch/arm/mach-pxa/<machine>.c or in
+ * linux/arch/mach-ixp4xx/<machine>.c and used in
+ * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
+ */
+
+struct pxa2xx_udc_mach_info {
+        int  (*udc_is_connected)(void);         /* do we see host? */
+        void (*udc_command)(int cmd);
+#define PXA2XX_UDC_CMD_CONNECT          0       /* let host see us */
+#define PXA2XX_UDC_CMD_DISCONNECT       1       /* so host won't see us */
+
+        /* Boards following the design guidelines in the developer's manual,
+         * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane
+         * VBUS IRQ and omit the methods above.  Store the GPIO number
+         * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
+         */
+        u16     gpio_vbus;                      /* high == vbus present */
+        u16     gpio_pullup;                    /* high == pullup activated */
+};
+