Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 164 insertions, 0 deletions

diff --git a/include/asm-arm/arch-sa1100/h3600.h b/include/asm-arm/arch-sa1100/h3600.h
new file mode 100644
index 000000000000..1b6355971574
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/h3600.h
@@ -0,0 +1,164 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3600_H_
+#define _INCLUDE_H3600_H_
+
+/* generalized support for H3xxx series Compaq Pocket PC's */
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS     (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS    SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS    SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT     0xf0000000
+#define H3600_BANK_2_VIRT    0xf1000000
+#define H3600_BANK_4_VIRT    0xf3800000
+
+/*
+   Machine-independent GPIO definitions
+   --- these are common across all current iPAQ platforms
+*/
+
+#define GPIO_H3600_NPOWER_BUTTON        GPIO_GPIO (0)   /* Also known as the "off button"  */
+
+#define GPIO_H3600_PCMCIA_CD1           GPIO_GPIO (10)
+#define GPIO_H3600_PCMCIA_IRQ1          GPIO_GPIO (11)
+
+/* UDA1341 L3 Interface */
+#define GPIO_H3600_L3_DATA              GPIO_GPIO (14)
+#define GPIO_H3600_L3_MODE              GPIO_GPIO (15)
+#define GPIO_H3600_L3_CLOCK             GPIO_GPIO (16)
+
+#define GPIO_H3600_PCMCIA_CD0           GPIO_GPIO (17)
+#define GPIO_H3600_SYS_CLK              GPIO_GPIO (19)
+#define GPIO_H3600_PCMCIA_IRQ0          GPIO_GPIO (21)
+
+#define GPIO_H3600_COM_DCD              GPIO_GPIO (23)
+#define GPIO_H3600_OPT_IRQ              GPIO_GPIO (24)
+#define GPIO_H3600_COM_CTS              GPIO_GPIO (25)
+#define GPIO_H3600_COM_RTS              GPIO_GPIO (26)
+
+#define IRQ_GPIO_H3600_NPOWER_BUTTON    IRQ_GPIO0
+#define IRQ_GPIO_H3600_PCMCIA_CD1       IRQ_GPIO10
+#define IRQ_GPIO_H3600_PCMCIA_IRQ1      IRQ_GPIO11
+#define IRQ_GPIO_H3600_PCMCIA_CD0       IRQ_GPIO17
+#define IRQ_GPIO_H3600_PCMCIA_IRQ0      IRQ_GPIO21
+#define IRQ_GPIO_H3600_COM_DCD          IRQ_GPIO23
+#define IRQ_GPIO_H3600_OPT_IRQ          IRQ_GPIO24
+#define IRQ_GPIO_H3600_COM_CTS          IRQ_GPIO25
+
+
+#ifndef __ASSEMBLY__
+
+enum ipaq_egpio_type {
+        IPAQ_EGPIO_LCD_POWER,     /* Power to the LCD panel */
+        IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
+        IPAQ_EGPIO_AUDIO_ON,      /* Audio power */
+        IPAQ_EGPIO_QMUTE,         /* Audio muting */
+        IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
+        IPAQ_EGPIO_OPT_ON,        /* Power to extension sleeves */
+        IPAQ_EGPIO_CARD_RESET,    /* Reset PCMCIA cards on extension sleeve (???) */
+        IPAQ_EGPIO_OPT_RESET,     /* Reset option pack (???) */
+        IPAQ_EGPIO_IR_ON,         /* IR sensor/emitter power */
+        IPAQ_EGPIO_IR_FSEL,       /* IR speed selection 1->fast, 0->slow */
+        IPAQ_EGPIO_RS232_ON,      /* Maxim RS232 chip power */
+        IPAQ_EGPIO_VPP_ON,        /* Turn on power to flash programming */
+        IPAQ_EGPIO_LCD_ENABLE,    /* Enable/disable LCD controller */
+};
+
+struct ipaq_model_ops {
+        const char     *generic_name;
+        void          (*control)(enum ipaq_egpio_type, int);
+        unsigned long (*read)(void);
+        void          (*blank_callback)(int blank);
+        int           (*pm_callback)(int req);      /* Primary model callback */
+        int           (*pm_callback_aux)(int req);  /* Secondary callback (used by HAL modules) */
+};
+
+extern struct ipaq_model_ops ipaq_model_ops;
+
+static __inline__ const char * h3600_generic_name(void)
+{
+        return ipaq_model_ops.generic_name;
+}
+
+static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
+{
+        if (ipaq_model_ops.control)
+                ipaq_model_ops.control(x,level);
+}
+
+static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
+{
+        if (ipaq_model_ops.control)
+                ipaq_model_ops.control(x,0);
+}
+
+static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
+{
+        if (ipaq_model_ops.control)
+                ipaq_model_ops.control(x,1);
+}
+
+static __inline__ unsigned long read_h3600_egpio(void)
+{
+        if (ipaq_model_ops.read)
+                return ipaq_model_ops.read();
+        return 0;
+}
+
+static __inline__ int  h3600_register_blank_callback(void (*f)(int))
+{
+        ipaq_model_ops.blank_callback = f;
+        return 0;
+}
+
+static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
+{
+        ipaq_model_ops.blank_callback = NULL;
+}
+
+
+static __inline__ int  h3600_register_pm_callback(int (*f)(int))
+{
+        ipaq_model_ops.pm_callback_aux = f;
+        return 0;
+}
+
+static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
+{
+        ipaq_model_ops.pm_callback_aux = NULL;
+}
+
+static __inline__ int h3600_power_management(int req)
+{
+        if (ipaq_model_ops.pm_callback)
+                return ipaq_model_ops.pm_callback(req);
+        return 0;
+}
+
+#endif /* ASSEMBLY */
+
+#endif /* _INCLUDE_H3600_H_ */