Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (212 commits)
  [ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver
  [ARM] pxa: V4L2 soc_camera driver for PXA270
  [ARM] pxa: restrict availability of pxa2xx PCMCIA drivers
  [ARM] 5005/1: BAST: Fix kset_name initialiser
  [ARM] 4967/1: Adds functions to set clkout rate for Samsung S3C2410
  [ARM] 4988/1: Add GPIO lib support to the EP93xx
  [ARM] Add initial sparsemem support
  [ARM] pxa: initialise PXA devices before platform init code
  [ARM] 5002/1: tosa: add two more leds
  [ARM] 5004/1: Tosa: make several unreferenced structures static.
  [ARM] 5003/1: Shut up sparse warnings
  [ARM] 4977/2: soc - pxa2xx-ac97 - Add missing clk_enable()
  [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line
  [ARM] 4974/1: Drop unused leds-tosa.
  [ARM] 4973/1: Tosa: use leds-gpio driver.
  [ARM] 4972/1: Tosa: convert scoop GPIOs usage to generic gpio code
  [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks
  [ARM] pxa: lubbock: move mis-placed SPI info
  [ARM] 4970/1: tosa: correct gpio used for wake up.
  [ARM] 4966/1: magician: add MFP pin configuration
  ...

9 files changed, 401 insertions, 39 deletions

diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h
index 3e437b7f425a..206f7a752882 100644
--- a/include/asm-arm/arch-realview/board-eb.h
+++ b/include/asm-arm/arch-realview/board-eb.h
@@ -26,6 +26,26 @@
 /*
  * RealView EB + ARM11MPCore peripheral addresses
  */
+#define REALVIEW_EB_UART0_BASE          0x10009000      /* UART 0 */
+#define REALVIEW_EB_UART1_BASE          0x1000A000      /* UART 1 */
+#define REALVIEW_EB_UART2_BASE          0x1000B000      /* UART 2 */
+#define REALVIEW_EB_UART3_BASE          0x1000C000      /* UART 3 */
+#define REALVIEW_EB_SSP_BASE            0x1000D000      /* Synchronous Serial Port */
+#define REALVIEW_EB_WATCHDOG_BASE       0x10010000      /* watchdog interface */
+#define REALVIEW_EB_TIMER0_1_BASE       0x10011000      /* Timer 0 and 1 */
+#define REALVIEW_EB_TIMER2_3_BASE       0x10012000      /* Timer 2 and 3 */
+#define REALVIEW_EB_GPIO0_BASE          0x10013000      /* GPIO port 0 */
+#define REALVIEW_EB_RTC_BASE            0x10017000      /* Real Time Clock */
+#define REALVIEW_EB_CLCD_BASE           0x10020000      /* CLCD */
+#define REALVIEW_EB_GIC_CPU_BASE        0x10040000      /* Generic interrupt controller CPU interface */
+#define REALVIEW_EB_GIC_DIST_BASE       0x10041000      /* Generic interrupt controller distributor */
+#define REALVIEW_EB_SMC_BASE            0x10080000      /* Static memory controller */
+
+#define REALVIEW_EB_FLASH_BASE          0x40000000
+#define REALVIEW_EB_FLASH_SIZE          SZ_64M
+#define REALVIEW_EB_ETH_BASE            0x4E000000      /* Ethernet */
+#define REALVIEW_EB_USB_BASE            0x4F000000      /* USB */
+
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
 #define REALVIEW_EB11MP_SCU_BASE        0x10100000      /* SCU registers */
 #define REALVIEW_EB11MP_GIC_CPU_BASE    0x10100100      /* Generic interrupt controller CPU interface */
diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/include/asm-arm/arch-realview/board-pb1176.h
new file mode 100644
index 000000000000..48ce9c833705
--- /dev/null
+++ b/include/asm-arm/arch-realview/board-pb1176.h
@@ -0,0 +1,152 @@
+/*
+ * include/asm-arm/arch-realview/board-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB1176_H
+#define __ASM_ARCH_BOARD_PB1176_H
+
+#include <asm/arch/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB1176_SCTL_BASE               0x10100000 /* System controller */
+#define REALVIEW_PB1176_SMC_BASE                0x10111000 /* SMC */
+#define REALVIEW_PB1176_DMC_BASE                0x10109000 /* DMC configuration */
+#define REALVIEW_PB1176_SDRAM67_BASE            0x70000000 /* SDRAM banks 6 and 7 */
+#define REALVIEW_PB1176_FLASH_BASE              0x30000000
+#define REALVIEW_PB1176_FLASH_SIZE              SZ_64M
+
+#define REALVIEW_PB1176_TIMER0_1_BASE           0x10104000 /* Timer 0 and 1 */
+#define REALVIEW_PB1176_TIMER2_3_BASE           0x10105000 /* Timer 2 and 3 */
+#define REALVIEW_PB1176_TIMER4_5_BASE           0x10106000 /* Timer 4 and 5 */
+#define REALVIEW_PB1176_WATCHDOG_BASE           0x10107000 /* watchdog interface */
+#define REALVIEW_PB1176_RTC_BASE                0x10108000 /* Real Time Clock */
+#define REALVIEW_PB1176_GPIO0_BASE              0x1010A000 /* GPIO port 0 */
+#define REALVIEW_PB1176_SSP_BASE                0x1010B000 /* Synchronous Serial Port */
+#define REALVIEW_PB1176_UART0_BASE              0x1010C000 /* UART 0 */
+#define REALVIEW_PB1176_UART1_BASE              0x1010D000 /* UART 1 */
+#define REALVIEW_PB1176_UART2_BASE              0x1010E000 /* UART 2 */
+#define REALVIEW_PB1176_UART3_BASE              0x1010F000 /* UART 3 */
+#define REALVIEW_PB1176_CLCD_BASE               0x10112000 /* CLCD */
+#define REALVIEW_PB1176_ETH_BASE                0x3A000000 /* Ethernet */
+#define REALVIEW_PB1176_USB_BASE                0x3B000000 /* USB */
+
+/*
+ * PCI regions
+ */
+#define REALVIEW_PB1176_PCI_BASE                0x60000000 /* PCI self config */
+#define REALVIEW_PB1176_PCI_CFG_BASE            0x61000000 /* PCI config */
+#define REALVIEW_PB1176_PCI_IO_BASE0            0x62000000 /* PCI IO region */
+#define REALVIEW_PB1176_PCI_MEM_BASE0           0x63000000 /* Memory region 1 */
+#define REALVIEW_PB1176_PCI_MEM_BASE1           0x64000000 /* Memory region 2 */
+#define REALVIEW_PB1176_PCI_MEM_BASE2           0x68000000 /* Memory region 3 */
+
+#define REALVIEW_PB1176_PCI_BASE_SIZE           0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE       0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE       0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE      0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE      0x04000000 /* 64MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE      0x08000000 /* 128MB */
+
+#define REALVIEW_DC1176_GIC_CPU_BASE            0x10120000 /* GIC CPU interface, on devchip */
+#define REALVIEW_DC1176_GIC_DIST_BASE           0x10121000 /* GIC distributor, on devchip */
+#define REALVIEW_PB1176_GIC_CPU_BASE            0x10040000 /* GIC CPU interface, on FPGA */
+#define REALVIEW_PB1176_GIC_DIST_BASE           0x10041000 /* GIC distributor, on FPGA */
+#define REALVIEW_PB1176_L220_BASE               0x10110000 /* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_DC1176_GIC_START                    32
+#define IRQ_PB1176_GIC_START                    64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG     (IRQ_DC1176_GIC_START + 0)      /* Watchdog timer */
+#define IRQ_DC1176_SOFTINT      (IRQ_DC1176_GIC_START + 1)      /* Software interrupt */
+#define IRQ_DC1176_COMMRx       (IRQ_DC1176_GIC_START + 2)      /* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx       (IRQ_DC1176_GIC_START + 3)      /* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0       (IRQ_DC1176_GIC_START + 8)      /* Timer 0 */
+#define IRQ_DC1176_TIMER1       (IRQ_DC1176_GIC_START + 9)      /* Timer 1 */
+#define IRQ_DC1176_TIMER2       (IRQ_DC1176_GIC_START + 10)     /* Timer 2 */
+#define IRQ_DC1176_APC          (IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC          (IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC         (IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC          (IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD         (IRQ_DC1176_GIC_START + 15)     /* CLCD controller */
+#define IRQ_DC1176_UART0        (IRQ_DC1176_GIC_START + 18)     /* UART 0 on development chip */
+#define IRQ_DC1176_UART1        (IRQ_DC1176_GIC_START + 19)     /* UART 1 on development chip */
+#define IRQ_DC1176_UART2        (IRQ_DC1176_GIC_START + 20)     /* UART 2 on development chip */
+#define IRQ_DC1176_UART3        (IRQ_DC1176_GIC_START + 21)     /* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2      (IRQ_DC1176_GIC_START + 30)     /* tile GIC */
+#define IRQ_DC1176_PB_IRQ1      (IRQ_DC1176_GIC_START + 31)     /* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A       (IRQ_PB1176_GIC_START + 1)      /* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B       (IRQ_PB1176_GIC_START + 2)      /* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0         (IRQ_PB1176_GIC_START + 3)      /* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1         (IRQ_PB1176_GIC_START + 4)      /* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI          (IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4        (IRQ_PB1176_GIC_START + 6)      /* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD      (IRQ_PB1176_GIC_START + 7)      /* Character LCD */
+#define IRQ_PB1176_GPIO1        (IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2        (IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH          (IRQ_PB1176_GIC_START + 10)     /* Ethernet controller */
+#define IRQ_PB1176_USB          (IRQ_PB1176_GIC_START + 11)     /* USB controller */
+
+#define IRQ_PB1176_PISMO        (IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI         (IRQ_PB1176_GIC_START + 19)     /* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1     (IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3     (IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC         (IRQ_PB1176_GIC_START + 24)     /* DMA controller */
+#define IRQ_PB1176_RTC          (IRQ_PB1176_GIC_START + 25)     /* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0        -1
+#define IRQ_PB1176_SSP          -1
+#define IRQ_PB1176_SCTL         -1
+
+#define NR_GIC_PB1176           2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176          (IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS                 NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR              NR_GIC_PB1176
+#endif
+
+#endif  /* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif  /* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/include/asm-arm/arch-realview/board-pb11mp.h
new file mode 100644
index 000000000000..a1294d915fa8
--- /dev/null
+++ b/include/asm-arm/arch-realview/board-pb11mp.h
@@ -0,0 +1,186 @@
+/*
+ * include/asm-arm/arch-realview/board-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB11MP_H
+#define __ASM_ARCH_BOARD_PB11MP_H
+
+#include <asm/arch/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB11MP_UART0_BASE              0x10009000      /* UART 0 */
+#define REALVIEW_PB11MP_UART1_BASE              0x1000A000      /* UART 1 */
+#define REALVIEW_PB11MP_UART2_BASE              0x1000B000      /* UART 2 */
+#define REALVIEW_PB11MP_UART3_BASE              0x1000C000      /* UART 3 */
+#define REALVIEW_PB11MP_SSP_BASE                0x1000D000      /* Synchronous Serial Port */
+#define REALVIEW_PB11MP_WATCHDOG0_BASE          0x1000F000      /* Watchdog 0 */
+#define REALVIEW_PB11MP_WATCHDOG_BASE           0x10010000      /* watchdog interface */
+#define REALVIEW_PB11MP_TIMER0_1_BASE           0x10011000      /* Timer 0 and 1 */
+#define REALVIEW_PB11MP_TIMER2_3_BASE           0x10012000      /* Timer 2 and 3 */
+#define REALVIEW_PB11MP_GPIO0_BASE              0x10013000      /* GPIO port 0 */
+#define REALVIEW_PB11MP_RTC_BASE                0x10017000      /* Real Time Clock */
+#define REALVIEW_PB11MP_TIMER4_5_BASE           0x10018000      /* Timer 4/5 */
+#define REALVIEW_PB11MP_TIMER6_7_BASE           0x10019000      /* Timer 6/7 */
+#define REALVIEW_PB11MP_SCTL_BASE               0x1001A000      /* System Controller */
+#define REALVIEW_PB11MP_CLCD_BASE               0x10020000      /* CLCD */
+#define REALVIEW_PB11MP_ONB_SRAM_BASE           0x10060000      /* On-board SRAM */
+#define REALVIEW_PB11MP_DMC_BASE                0x100E0000      /* DMC configuration */
+#define REALVIEW_PB11MP_SMC_BASE                0x100E1000      /* SMC configuration */
+#define REALVIEW_PB11MP_CAN_BASE                0x100E2000      /* CAN bus */
+#define REALVIEW_PB11MP_CF_BASE                 0x18000000      /* Compact flash */
+#define REALVIEW_PB11MP_CF_MEM_BASE             0x18003000      /* SMC for Compact flash */
+#define REALVIEW_PB11MP_GIC_CPU_BASE            0x1E000000      /* Generic interrupt controller CPU interface */
+#define REALVIEW_PB11MP_FLASH0_BASE             0x40000000
+#define REALVIEW_PB11MP_FLASH0_SIZE             SZ_64M
+#define REALVIEW_PB11MP_FLASH1_BASE             0x44000000
+#define REALVIEW_PB11MP_FLASH1_SIZE             SZ_64M
+#define REALVIEW_PB11MP_ETH_BASE                0x4E000000      /* Ethernet */
+#define REALVIEW_PB11MP_USB_BASE                0x4F000000      /* USB */
+#define REALVIEW_PB11MP_GIC_DIST_BASE           0x1E001000      /* Generic interrupt controller distributor */
+#define REALVIEW_PB11MP_LT_BASE                 0xC0000000      /* Logic Tile expansion */
+#define REALVIEW_PB11MP_SDRAM6_BASE             0x70000000      /* SDRAM bank 6 256MB */
+#define REALVIEW_PB11MP_SDRAM7_BASE             0x80000000      /* SDRAM bank 7 256MB */
+
+#define REALVIEW_PB11MP_SYS_PLD_CTRL1           0x74
+
+/*
+ * PB11MPCore PCI regions
+ */
+#define REALVIEW_PB11MP_PCI_BASE                0x90040000      /* PCI-X Unit base */
+#define REALVIEW_PB11MP_PCI_IO_BASE             0x90050000      /* IO Region on AHB */
+#define REALVIEW_PB11MP_PCI_MEM_BASE            0xA0000000      /* MEM Region on AHB */
+
+#define REALVIEW_PB11MP_PCI_BASE_SIZE           0x10000         /* 16 Kb */
+#define REALVIEW_PB11MP_PCI_IO_SIZE             0x1000          /* 4 Kb */
+#define REALVIEW_PB11MP_PCI_MEM_SIZE            0x20000000      /* 512 MB */
+
+/*
+ * Testchip peripheral and fpga gic regions
+ */
+#define REALVIEW_TC11MP_SCU_BASE                0x1F000000      /* IRQ, Test chip */
+#define REALVIEW_TC11MP_GIC_CPU_BASE            0x1F000100      /* Test chip interrupt controller CPU interface */
+#define REALVIEW_TC11MP_TWD_BASE                0x1F000700
+#define REALVIEW_TC11MP_TWD_SIZE                0x00000100
+#define REALVIEW_TC11MP_GIC_DIST_BASE           0x1F001000      /* Test chip interrupt controller distributor */
+#define REALVIEW_TC11MP_L220_BASE               0x1F002000      /* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_TC11MP_GIC_START                    32
+#define IRQ_PB11MP_GIC_START                    64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI         (IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1     (IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3     (IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB          (IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0        (IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1        (IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC          (IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0         (IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1         (IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH          (IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1      (IRQ_TC11MP_GIC_START + 10)             /* main GIC */
+#define IRQ_TC11MP_PB_IRQ2      (IRQ_TC11MP_GIC_START + 11)             /* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1      (IRQ_TC11MP_GIC_START + 12)             /* main GIC */
+#define IRQ_TC11MP_PB_FIQ2      (IRQ_TC11MP_GIC_START + 13)             /* tile GIC */
+#define IRQ_TC11MP_MMCI0A       (IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B       (IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0     (IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1     (IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2     (IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3     (IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0     (IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1     (IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2     (IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3     (IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4     (IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5     (IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6     (IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7     (IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT   (IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE   (IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE  (IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG     (IRQ_PB11MP_GIC_START + 0)      /* Watchdog timer */
+#define IRQ_PB11MP_SOFT         (IRQ_PB11MP_GIC_START + 1)      /* Software interrupt */
+#define IRQ_PB11MP_COMMRx       (IRQ_PB11MP_GIC_START + 2)      /* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx       (IRQ_PB11MP_GIC_START + 3)      /* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0        (IRQ_PB11MP_GIC_START + 6)      /* GPIO 0 */
+#define IRQ_PB11MP_GPIO1        (IRQ_PB11MP_GIC_START + 7)      /* GPIO 1 */
+#define IRQ_PB11MP_GPIO2        (IRQ_PB11MP_GIC_START + 8)      /* GPIO 2 */
+                                                                /* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1     (IRQ_PB11MP_GIC_START + 10)     /* Real Time Clock */
+#define IRQ_PB11MP_SSP          (IRQ_PB11MP_GIC_START + 11)     /* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1   (IRQ_PB11MP_GIC_START + 12)     /* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1   (IRQ_PB11MP_GIC_START + 13)     /* UART 1 on development chip */
+#define IRQ_PB11MP_UART2        (IRQ_PB11MP_GIC_START + 14)     /* UART 2 on development chip */
+#define IRQ_PB11MP_UART3        (IRQ_PB11MP_GIC_START + 15)     /* UART 3 on development chip */
+#define IRQ_PB11MP_SCI          (IRQ_PB11MP_GIC_START + 16)     /* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1  (IRQ_PB11MP_GIC_START + 17)     /* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1  (IRQ_PB11MP_GIC_START + 18)     /* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1    (IRQ_PB11MP_GIC_START + 19)     /* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1    (IRQ_PB11MP_GIC_START + 20)     /* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1    (IRQ_PB11MP_GIC_START + 21)     /* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD      (IRQ_PB11MP_GIC_START + 22)     /* Character LCD */
+#define IRQ_PB11MP_CLCD         (IRQ_PB11MP_GIC_START + 23)     /* CLCD controller */
+#define IRQ_PB11MP_DMAC         (IRQ_PB11MP_GIC_START + 24)     /* DMA controller */
+#define IRQ_PB11MP_PWRFAIL      (IRQ_PB11MP_GIC_START + 25)     /* Power failure */
+#define IRQ_PB11MP_PISMO        (IRQ_PB11MP_GIC_START + 26)     /* PISMO interface */
+#define IRQ_PB11MP_DoC          (IRQ_PB11MP_GIC_START + 27)     /* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1     (IRQ_PB11MP_GIC_START + 28)     /* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1     (IRQ_PB11MP_GIC_START + 29)     /* USB controller */
+#define IRQ_PB11MP_TSPEN        (IRQ_PB11MP_GIC_START + 30)     /* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD       (IRQ_PB11MP_GIC_START + 31)     /* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC          -1
+#define IRQ_PB11MP_SCTL         -1
+
+#define NR_GIC_PB11MP           2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP          (IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS                 NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR              NR_GIC_PB11MP
+#endif
+
+#endif  /* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif  /* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S
index f17efc65518a..c8c860c3c26e 100644
--- a/include/asm-arm/arch-realview/debug-macro.S
+++ b/include/asm-arm/arch-realview/debug-macro.S
@@ -15,7 +15,7 @@
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx,      #0x10000000
-                movne   \rx,      #0xf1000000   @ virtual base
+                movne   \rx,      #0xf0000000   @ virtual base
                 orr     \rx, \rx, #0x00009000
                 .endm
 
diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h
index bad8d7ce9bfe..1ee8313ceb6a 100644
--- a/include/asm-arm/arch-realview/hardware.h
+++ b/include/asm-arm/arch-realview/hardware.h
@@ -25,7 +25,7 @@
 #include <asm/sizes.h>
 
 /* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)           ((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000)
+#define IO_ADDRESS(x)           (((x) & 0x0fffffff) + 0xf0000000)
 #define __io_address(n)         __io(IO_ADDRESS(n))
 
 #endif
diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
index ad0c911002fc..ccbac59235c6 100644
--- a/include/asm-arm/arch-realview/irqs.h
+++ b/include/asm-arm/arch-realview/irqs.h
@@ -23,6 +23,8 @@
 #define __ASM_ARCH_IRQS_H
 
 #include <asm/arch/board-eb.h>
+#include <asm/arch/board-pb11mp.h>
+#include <asm/arch/board-pb1176.h>
 
 #define IRQ_LOCALTIMER          29
 #define IRQ_LOCALWDOG           30
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index 4fd351b5e4a2..424c0aaf46a0 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -32,9 +32,6 @@
 #define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
 #define REALVIEW_SSRAM_SIZE           SZ_2M
 
-#define REALVIEW_FLASH_BASE           0x40000000
-#define REALVIEW_FLASH_SIZE           SZ_64M
-
 /* 
  *  SDRAM
  */
@@ -175,42 +172,20 @@
 #define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
 
 /*
- * REALVIEW peripheral addresses
+ * RealView common peripheral addresses
  */
 #define REALVIEW_SCTL_BASE            0x10001000        /* System controller */
 #define REALVIEW_I2C_BASE             0x10002000        /* I2C control */
-        /* Reserved 0x10003000 */
 #define REALVIEW_AACI_BASE            0x10004000        /* Audio */
 #define REALVIEW_MMCI0_BASE           0x10005000        /* MMC interface */
 #define REALVIEW_KMI0_BASE            0x10006000        /* KMI interface */
 #define REALVIEW_KMI1_BASE            0x10007000        /* KMI 2nd interface */
 #define REALVIEW_CHAR_LCD_BASE        0x10008000        /* Character LCD */
-#define REALVIEW_UART0_BASE           0x10009000        /* UART 0 */
-#define REALVIEW_UART1_BASE           0x1000A000        /* UART 1 */
-#define REALVIEW_UART2_BASE           0x1000B000        /* UART 2 */
-#define REALVIEW_UART3_BASE           0x1000C000        /* UART 3 */
-#define REALVIEW_SSP_BASE             0x1000D000        /* Synchronous Serial Port */
 #define REALVIEW_SCI_BASE             0x1000E000        /* Smart card controller */
-        /* Reserved 0x1000F000 */
-#define REALVIEW_WATCHDOG_BASE        0x10010000        /* watchdog interface */
-#define REALVIEW_TIMER0_1_BASE        0x10011000        /* Timer 0 and 1 */
-#define REALVIEW_TIMER2_3_BASE        0x10012000        /* Timer 2 and 3 */
-#define REALVIEW_GPIO0_BASE           0x10013000        /* GPIO port 0 */
 #define REALVIEW_GPIO1_BASE           0x10014000        /* GPIO port 1 */
 #define REALVIEW_GPIO2_BASE           0x10015000        /* GPIO port 2 */
-        /* Reserved 0x10016000 */
-#define REALVIEW_RTC_BASE             0x10017000        /* Real Time Clock */
 #define REALVIEW_DMC_BASE             0x10018000        /* DMC configuration */
-#define REALVIEW_PCI_CORE_BASE        0x10019000        /* PCI configuration */
-        /* Reserved 0x1001A000 - 0x1001FFFF */
-#define REALVIEW_CLCD_BASE            0x10020000        /* CLCD */
 #define REALVIEW_DMAC_BASE            0x10030000        /* DMA controller */
-#define REALVIEW_GIC_CPU_BASE         0x10040000        /* Generic interrupt controller CPU interface */
-#define REALVIEW_GIC_DIST_BASE        0x10041000        /* Generic interrupt controller distributor */
-#define REALVIEW_SMC_BASE             0x10080000        /* SMC */
-        /* Reserved 0x10090000 - 0x100EFFFF */
-
-#define REALVIEW_ETH_BASE             0x4E000000        /* Ethernet */
 
 /* PCI space */
 #define REALVIEW_PCI_BASE             0x41000000        /* PCI Interface */
diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h
index 08b3db883c36..d55802d645af 100644
--- a/include/asm-arm/arch-realview/scu.h
+++ b/include/asm-arm/arch-realview/scu.h
@@ -1,8 +1,13 @@
 #ifndef __ASMARM_ARCH_SCU_H
 #define __ASMARM_ARCH_SCU_H
 
-#include <asm/arch/board-eb.h>
-
-#define SCU_BASE        REALVIEW_EB11MP_SCU_BASE
+/*
+ * SCU registers
+ */
+#define SCU_CTRL                0x00
+#define SCU_CONFIG              0x04
+#define SCU_CPU_STATUS          0x08
+#define SCU_INVALIDATE          0x0c
+#define SCU_FPGA_REVISION       0x10
 
 #endif
diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h
index 3d5c2db07a26..4c905d7a13a1 100644
--- a/include/asm-arm/arch-realview/uncompress.h
+++ b/include/asm-arm/arch-realview/uncompress.h
@@ -18,28 +18,50 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <asm/hardware.h>
+#include <asm/mach-types.h>
 
-#include <asm/arch/platform.h>
+#include <asm/arch/board-eb.h>
+#include <asm/arch/board-pb11mp.h>
+#include <asm/arch/board-pb1176.h>
 
-#define AMBA_UART_DR    (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x00))
-#define AMBA_UART_LCRH  (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x2c))
-#define AMBA_UART_CR    (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x30))
-#define AMBA_UART_FR    (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x18))
+#define AMBA_UART_DR(base)      (*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)    (*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)      (*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)      (*(volatile unsigned char *)((base) + 0x18))
+
+/*
+ * Return the UART base address
+ */
+static inline unsigned long get_uart_base(void)
+{
+        if (machine_is_realview_eb())
+                return REALVIEW_EB_UART0_BASE;
+        else if (machine_is_realview_pb11mp())
+                return REALVIEW_PB11MP_UART0_BASE;
+        else if (machine_is_realview_pb1176())
+                return REALVIEW_PB1176_UART0_BASE;
+        else
+                return 0;
+}
 
 /*
  * This does not append a newline
  */
 static inline void putc(int c)
 {
-        while (AMBA_UART_FR & (1 << 5))
+        unsigned long base = get_uart_base();
+
+        while (AMBA_UART_FR(base) & (1 << 5))
                 barrier();
 
-        AMBA_UART_DR = c;
+        AMBA_UART_DR(base) = c;
 }
 
 static inline void flush(void)
 {
-        while (AMBA_UART_FR & (1 << 3))
+        unsigned long base = get_uart_base();
+
+        while (AMBA_UART_FR(base) & (1 << 3))
                 barrier();
 }